Тёмный

Gelli Plate Transfers With Your Own Photos! 🎨 ❤ 

BlueLavaArt - Jessica Russo Scherr | Artist
Подписаться 27 тыс.
Просмотров 97 тыс.
50% 1

Master Gelli Plate Printmaking: Basic to Advanced Techniques - Art Demos & Tutorials
Struggling with your laser prints: • Gel Plate Troubles? | ...
✨🎨Looking for the supplies I use?🎨
I have it in my Amazon Storefront: shorturl.at/bqDNV
✦Shop Jessica's Art, Prints and Originals: www.saatchiart.com/russoscherr
Sales of my art through Saatchi, include shipping and Saatchi's Commission. I earn a small commission off of art supplies purchased from my Amazon Storefront. These are all art supplies she uses and highly recommends.
⬇️ Supply List Below ⬇️
Video Description:
Welcome to an immersive 30-minute tutorial on creating captivating (and sometimes frustrating) art with Gelli plates image transfer monotypes with laser prints! Whether you're a beginner or seasoned artist, this video has something for you. Learn about essential supplies, laser print recommendations, photo editing tips, and all the insider tricks I've gathered over the years. Join me on this creative journey!
🎨 ❤ SUBSCRIBE if you're new to my channel & turn your notifications on so you never miss any new video RU-vid Subscribe ru-vid.com?s...
* Apply Acrylic Paint: Squeeze a bit of acrylic paint onto the Gelli plate and use a brayer to create a smooth, thin layer.
* Place Your Image: Lay your laser print photograph face-down on the painted plate, pressing gently for solid contact.
* Transfer the Image: Rub the back of the photo with a brayer or fingertips, ensuring even pressure for a flawless image transfer.
* Peel and Reveal: Lift your photograph carefully to unveil the transferred image on the Gelli plate.
* Reverse Painting: Apply one or more layers of acrylic paint, allowing each to dry between applications.
* Transfer Layer: Evenly apply acrylic paint or gel medium to the plate with a brayer. Cover with Bristol Board paper, weigh it down with books, and let it dry for 20-30 minutes. 📸✨
👍Thumbs up for more art videos!
Special Thanks to these Artists and many more!!!
Khabraal: www.tiktok.com/@khabraal?lang=en
Junky.Kid www.tiktok.com/@junky.kid?lan...
@Ceramink / uc2vrrq6f-q6oi8sidxeapxg
Amber / princessmeatloaf
Wesley Joseph www.tiktok.com/@wezzocreates?...
Learn art techniques with tips and tricks to make the process go smoothly and easily.
More lessons are found below:
Jessica Russo Scherr- Fine Artist @bluelavaart
• STAY CONNECTED •
✦🎨My Website: www.bluelavaart.com/
✦ 📩Contact: bluelavaart.com/contact
✦🐦 My Twitter: / bluelavaart
✦ 📸My Instagram: @bluelavaart / bluelavaart
✦🎨 Tik Tok: @bluelavaart / bluelavaart
✦🎨Buy my art: www.saatchiart.com/russoscherr
✨🎨Looking for the supplies I use?🎨
Check out my Amazon Storefront👇👇
US Amazon: shorturl.at/bqDNV
German Amazon: amzn.to/4bpgISu
Gelli Plate Supplies | These are the materials that I use (after lots of experimentation)
🌟Gelli Brand plate @gelliarts
🌟Amsterdam, Liquitex and Golden Paints (in that order of how much I use them)
🌟Brayer (rollie thing)
🌟Bristol 205 gr
🌟Baby Oil
🌟Laser Print
🚀 Optional Supplies 🚀
🌟Plexiglas for storage and to see underneath while reverse painting
🌟Gel Medium for thinning acrylic paint and for transfer layers
🌟Paint Brushes and Palette Knives
Have fun and experiment 💃
I bought my supplies @boesner_deutschland @boesner_frankfurt
If you have any questions, feel free to comment down below!
Thank you so much for watching, have a wonderful day and I will see you soon!
Gelli plate
#gelliplate
#geliplateprinting
#imagetransfer
#monotype
#Printmaking
Art Demos on RU-vid
Art Tutorials,Art Lessons,Visual Arts Education,International Baccalaureate Art,Adult Art Learning,Acrylic Painting Techniques,Art Supplies Guide,Step-by-Step Art,gelli printing,gelli plate printing techniques,gelli plate printing for beginners,gelli printing tutorials,gelli plate magazine transfer,gel plate print,gel plate printing techniques,gel plate for beginners,gel plate image transfer,printmaking,monotype,art teacher
art process,art recovery,portrait painting,mixed media,self-portrait,monochrome,Waffle House bathroom,art inspiration,art is growth,art is life,art tutorial,art lesson,art therapy,creative process,art techniques,art transformation,art evolution,art journey,art mindset,art motivation,art healing,art experimentation,art exploration,art education,art training,art mastery,art progress,art success,art failure,art mistakes,art improvement
Shorts, art supplies, paint, art teacher, art education, ib art, fine artist,
artist, speed painting, oil painting, how to, make art, Painting techniques, viral art, painter, instant, art lessons, art demo, how to paint, art ideas, professional artist, make art every day, painting, glazing, old holland, Germany,
Italy, Florence

Опубликовано:

 

31 окт 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 278   
@bluelavaart
@bluelavaart 7 месяцев назад
Special Thanks to these Artists and many more!!! They have helped me so much in understanding how to do this process. Give them a follow. Khabraal: www.tiktok.com/@khabraal?lang=en Junky.Kid www.tiktok.com/@junky.kid?lan... @Ceramink www.tiktok.com/@UC2VRRQ6F-q6o... Amber www.tiktok.com/@princessmeatloaf Wesley Joseph www.tiktok.com/@wezzocreates?...
@DCW39
@DCW39 6 месяцев назад
What have you started? Stumbled upon this video and now the gel plate is on order… this is a rabbit hole I’m looking forward to exploring!
@bluelavaart
@bluelavaart 6 месяцев назад
How exciting! Enjoy the rabbit hole
@jcarson7574
@jcarson7574 4 месяца назад
I just found out about this process today and have been watching videos for hours. I cant wait to get into it myself!
@jcarson7574
@jcarson7574 3 месяца назад
Have you tried yet? So tonight was my first attempt at anything, total newbie, tried to do an image transfer with no luck.😢Can’t figure out why unless my paint is drying too quick on the plate? Using Amsterdam Standard acrylic.😢😢Or my laser print isn’t good? Guess I’ll keep trying. She makes it look so easy!
@suzijorgensen6545
@suzijorgensen6545 3 месяца назад
😂😂😂
@Bigheartrolling
@Bigheartrolling 2 месяца назад
Hahaha. Same here!
@roysfoto
@roysfoto Месяц назад
May I just mention that you are by far one of the few who present your tutorials so honestly, using materials, understandable without lengthy chatter, but straight forward. We thank you very much and wish you a happy and peaceful life.
@bluelavaart
@bluelavaart Месяц назад
That is so kind of you to say. I can probably attribute it to the fact that I teach middle - High School Art. Thank you for your kind comment and I also wish you a happy and peaceful life
@susanfernandes7748
@susanfernandes7748 4 месяца назад
I have a Brother colour laser. I set the printer driver to THICKER paper even though I'm using a 32lb copier paper. The THICKER paper setting causes the paper to move more slowly through the process. You get more toner deposited and you get a longer fuse time. I very rarely have image transfer failures with even the finest lines on an image. Love the addition of painting the on the gel plate itself -- stunning results and a very well constructed video -- thank you!
@bluelavaart
@bluelavaart 4 месяца назад
Excellent tips and suggestions. Thank you!!!
@shannonburns2289
@shannonburns2289 2 месяца назад
Does the "thicker paper" option appear in the print window?
@bluelavaart
@bluelavaart 2 месяца назад
@@shannonburns2289 I can set mine on my computer in the pop up box for different types of printer paper but it might vary by printer
@susanfernandes7748
@susanfernandes7748 2 месяца назад
@@shannonburns2289 Yes, the setting is under Preferences. Every printer driver is different as is every printer. Most Brother LASER printers will have the same setup. Inkjet printers are a different beast. An inkjet printer is not able to print on really thick paper so they may not have the option. You would set it to the thickest paper option you have and print on normal copier type paper.
@veerlewitdouck9831
@veerlewitdouck9831 Месяц назад
Hello, how do you double print? Put the print back in the paper carrier? Thanks!
@tomgilbertson5236
@tomgilbertson5236 5 месяцев назад
This is an excellent lesson! I’m a former (many years!) art instructor….. I’m envious! Seriously, this video is very well organized and presented. So much information and no useless wandering around. If there are awards given for instructional videos you should get an Oscar. Now….my 16 x 20” Gelli should be here this pm…….can’t wait…..
@bluelavaart
@bluelavaart 5 месяцев назад
Wow! What a comment. I am so happy that you found my video. I’m a bit jealous of the 16x20 inch plate. I’m hoping to get one soon 🫶 ❤️🫶❤️🫶
@paulfoote7869
@paulfoote7869 5 месяцев назад
This is one of the better videos on how to do gel plate image transfers and Jessica's prints are beautiful. If you are going to paint your print on the plate like Jessica does in this video, you will need to let each layer dry before you add the next layer.
@bluelavaart
@bluelavaart 5 месяцев назад
Oh thank you! How thoughtful of you!
@creativebeanart
@creativebeanart 6 месяцев назад
I use packing tape to lift little bits of paint. Works a treat.❤
@bluelavaart
@bluelavaart 6 месяцев назад
I am going to try that
@bertschlutzenheimer7095
@bertschlutzenheimer7095 7 месяцев назад
This is awesome! Thank you SO much for your precise, detailed and so very warm way to explain your whole process! Thank you 💚
@bluelavaart
@bluelavaart 7 месяцев назад
I am so happy! Thanks for sharing your feedback
@mendyhand3895
@mendyhand3895 3 месяца назад
Dang girl! Thank you SO much! Going to watch this multiple times! ❤️🙏🏻👍🖌🎨
@bluelavaart
@bluelavaart 3 месяца назад
YAY!!! Happy you find it helpful
@shirleykamala1797
@shirleykamala1797 3 месяца назад
lovely!!!
@user-db4sq4dm7d
@user-db4sq4dm7d 2 месяца назад
Thank you so much for this video!
@bluelavaart
@bluelavaart 2 месяца назад
Glad it was helpful!
@blue.orchid.coaching
@blue.orchid.coaching 2 месяца назад
Amazing content! Thanks so much for the lessons!
@bluelavaart
@bluelavaart 2 месяца назад
My pleasure ☀️♥️🎨
@coletteclegg1519
@coletteclegg1519 Месяц назад
Excellent. Thanks a million.
@bluelavaart
@bluelavaart Месяц назад
My pleasure ♥️
@Julietavolcano
@Julietavolcano 6 месяцев назад
This looks like my type of art!!
@kittycat1302
@kittycat1302 2 месяца назад
Wow! I love ❤️ this technique! Plan to try it as soon as I get a chance! Thank you !
@bluelavaart
@bluelavaart 2 месяца назад
Wonderful!
@frankfolino3118
@frankfolino3118 Месяц назад
What great insights!!!!
@bluelavaart
@bluelavaart Месяц назад
Thanks!
@user-nw2mj9rc2k
@user-nw2mj9rc2k 2 месяца назад
His was a fantastic video and very informative. Can’t wait to start. Thanks ❤
@bluelavaart
@bluelavaart 2 месяца назад
You are so welcome! 🤗
@br0600
@br0600 3 месяца назад
Amazing training video, thank you very much!
@bluelavaart
@bluelavaart 3 месяца назад
You're very welcome!
@heidiholycross-lui7340
@heidiholycross-lui7340 3 месяца назад
This is such a great video! Thank you for sharing your process for how you created these images, especially the printing tips at the end. Plus it was a delight to see your artwork too!
@bluelavaart
@bluelavaart 3 месяца назад
Thank you so much! Greatly appreciate 💝
@reneewikaire5478
@reneewikaire5478 6 месяцев назад
✨ brilliant TY
@TrixieStardust73
@TrixieStardust73 Месяц назад
This is amazing! Thank you so much for the great tutorial! I can't wait to try this. I had never heard of this type of printing before and love how accessible it is with a minimal amount of supplies. So excited!
@bluelavaart
@bluelavaart Месяц назад
You are so welcome!
@towahead
@towahead 11 дней назад
thanks so much
@viviannedelavega605
@viviannedelavega605 Месяц назад
Thank you for a brilliant presentation and a wealth of information!
@bluelavaart
@bluelavaart Месяц назад
Greatly appreciated!!!
@viviannedelavega605
@viviannedelavega605 Месяц назад
Certainly, you’re very welcome. What is your favorite way to clean your gelli plate?thank you…
@bluelavaart
@bluelavaart Месяц назад
@@viviannedelavega605 Using baby oil for the stuborn crusty bits.
@Creativeassemblages
@Creativeassemblages 6 месяцев назад
Thank you. The best tutorial I have seen on Gelli Printing.
@bluelavaart
@bluelavaart 6 месяцев назад
That is so great to hear. I am happy you found it helpful
@awankstain
@awankstain Месяц назад
Great video thanks!
@bluelavaart
@bluelavaart Месяц назад
Glad you liked it! ♥️
@beverlyhayshouston2770
@beverlyhayshouston2770 4 месяца назад
The print with the arched window is my favorite!
@bluelavaart
@bluelavaart 4 месяца назад
That is one of my favorites too
@karenmason5218
@karenmason5218 6 месяцев назад
This is the BEST tutorial I have seen!!! Thank you!
@bluelavaart
@bluelavaart 6 месяцев назад
Wow, thank you! 😊
@LindaAKeller
@LindaAKeller 4 месяца назад
Have never used photo transfers before. Am definitely intrigued. Thank you so much.
@bluelavaart
@bluelavaart 4 месяца назад
You are so welcome! 🤗
@p8ulr3id
@p8ulr3id 6 месяцев назад
Brilliant! Thank you Jessica, a great explanation of your process
@bluelavaart
@bluelavaart 6 месяцев назад
You are so welcome!
@DayByeDayChristine
@DayByeDayChristine 6 месяцев назад
Thank you for sharing your knowledge about this fascinating art of transferring images and printmaking.
@bluelavaart
@bluelavaart 6 месяцев назад
You are so welcome
@Scrapart_by_Zelinda
@Scrapart_by_Zelinda 6 месяцев назад
Your video was the best I have watched. Some don’t explain you have to let the paint dry. Thank you. And I loved how you had color with a paint brush.
@bluelavaart
@bluelavaart 6 месяцев назад
Always happy to help! Thank you so much. You made my day
@princesspandora8671
@princesspandora8671 6 месяцев назад
looks so fun!! thanks for sharing
@bluelavaart
@bluelavaart 6 месяцев назад
Thanks for watching!
@artsydancequeen2964
@artsydancequeen2964 3 месяца назад
Thank you for an excellent tutorial. Now I need to get a laser printer!
@bluelavaart
@bluelavaart 3 месяца назад
Glad it was helpful! ♥️
@AdolfitoKatastrophen
@AdolfitoKatastrophen 7 месяцев назад
Amazing thank you! This is super helpful!
@bluelavaart
@bluelavaart 7 месяцев назад
Glad you found it helpful!!!
@carolratcliff
@carolratcliff 5 месяцев назад
I simply love your work!! You have really transformed the art of jelly printing into a fine art, especially with the added painting of your plates! And I also love the experimental-ness and fun of finding a style I need to find a style and I love the experimentation you do. Thank you for all of the, wonderful tips and tricks.
@carolratcliff
@carolratcliff 5 месяцев назад
And I meant to say anyone can print with a gelli print, but it takes an artist to find a real true work of art!❤
@bluelavaart
@bluelavaart 5 месяцев назад
I am totally blown away by your comment. Thanks for your supportive and kind words! You have made my day ❤️❤️❤️❤️
@us7579
@us7579 4 месяца назад
Great video thank you ❤
@bluelavaart
@bluelavaart 4 месяца назад
You are so welcome!
@bardoteachings
@bardoteachings 5 месяцев назад
I felt a true creative spark from your wonderful video. Thank you!!!
@bluelavaart
@bluelavaart 5 месяцев назад
Wow, thank you 😊
@juliebooton1360
@juliebooton1360 2 месяца назад
Excellent tutorial. I love your explanations and your work. My mind was racing with all the possibilities. Gifts I could make for my children and grandchildren of the family home, places visited and loved by us all. Thank you.
@bluelavaart
@bluelavaart 2 месяца назад
Thank you so much! It is a great way to reimagine your photos. Have fun!!!
@annelise8014
@annelise8014 5 месяцев назад
Wow, what generous instruction - thank you from Mexico!
@bluelavaart
@bluelavaart 5 месяцев назад
Thanks for watching! ❤️❤️❤️❤️
@fruitlessbeast
@fruitlessbeast 5 месяцев назад
So much here! Many things to try now. Thanks for taking the time to share!
@bluelavaart
@bluelavaart 5 месяцев назад
You are so welcome! 🤗
@221b-Maker-Street
@221b-Maker-Street 5 месяцев назад
Wow! These images are just fabulous, and _just_ the kind of thing I'd love to create with a gelli plate - thank you, Jessica!
@bluelavaart
@bluelavaart 5 месяцев назад
Thanks so much. I’m going to work on some more tutorials. Let me know what you still want to learn about ❤️❤️❤️
@221b-Maker-Street
@221b-Maker-Street 5 месяцев назад
@@bluelavaart Thank you! I shall put my thinking cap on as I definitely want to learn more. Thanks once again for sharing your gifts with us, Jessica. 🤍
@charlottebialek-cx5rz
@charlottebialek-cx5rz Месяц назад
Thanks!
@bluelavaart
@bluelavaart Месяц назад
Thank you so very much ♥️🎨♥️
@krudler406
@krudler406 5 месяцев назад
this was great, thank you so much for sharing!
@bluelavaart
@bluelavaart 5 месяцев назад
You are so welcome!
@heloneidaheloneida
@heloneidaheloneida 4 месяца назад
You are a true artist and an inspiration for our work, thank you
@bluelavaart
@bluelavaart 4 месяца назад
Wow, thank you! Greatly appreciated
@maryjokattelman3321
@maryjokattelman3321 4 месяца назад
Thank you so much for taking the time to share. I have learned a lot.
@bluelavaart
@bluelavaart 4 месяца назад
Glad it was helpful! ❤️🤩❤️🤩
@odilehelbongo5221
@odilehelbongo5221 4 месяца назад
Thank you so much! Love from Strasbourg France😘💝
@bluelavaart
@bluelavaart 4 месяца назад
You are so welcome! Merci ❤️ Strasbourg
@marionlyding7935
@marionlyding7935 5 месяцев назад
WOW. Thank you for the great instructions! This is a very helpful video. I am sending you greetings and sunshine from New Mexico.
@bluelavaart
@bluelavaart 5 месяцев назад
So happy you found it helpful! Greetings from Germany
@bootseycloverdale7371
@bootseycloverdale7371 6 месяцев назад
Excellant information. I can't wait to try this!
@bluelavaart
@bluelavaart 6 месяцев назад
Have fun!
@barbaracabrera207
@barbaracabrera207 6 месяцев назад
I'm a new subbie. Love your channel. Thx. Austin TX USA
@bluelavaart
@bluelavaart 6 месяцев назад
Welcome!! Thanks!!!! Let me know if there are any types of art videos you would like to see
@marythomas5656
@marythomas5656 6 месяцев назад
Don't make the mistake of buying the Speedball plates which are used with printmaking inks. The processes are NOT interchangeable.
@bluelavaart
@bluelavaart 6 месяцев назад
Yes! I was so frustrated with Speedball for this process.
@scrappytraveler-cherylfran4890
@scrappytraveler-cherylfran4890 5 месяцев назад
What Gelli Plate do you both recommend? Thank you.
@sarnxero2628
@sarnxero2628 6 месяцев назад
This is really cool. I am going to give this a try.
@bluelavaart
@bluelavaart 6 месяцев назад
Go for it!
@tracksuitgod
@tracksuitgod 4 месяца назад
This is the most detailed tutorial and most helpful gelli plate printing video I have found. Thank you for being so precise and reassuring that all my mistakes aren't solely my fault 😅
@bluelavaart
@bluelavaart 4 месяца назад
Glad it was helpful! and the mistake are totally not your fault. It is a delicate process with lots of variables
@dreamwoodsbutterfly
@dreamwoodsbutterfly 6 месяцев назад
Thanks for this very informative video!
@bluelavaart
@bluelavaart 6 месяцев назад
Glad it was helpful!
@joon4yu
@joon4yu 5 месяцев назад
Great tutorial ❤❤❤😊
@bluelavaart
@bluelavaart 5 месяцев назад
Thank you! 😊 So glad you liked it. I am working on a new one with some new tips.
@shannonburns2289
@shannonburns2289 2 месяца назад
I have been honing my transfer skills for over a year now, and still this tutorial provided new information. I have yet to try the "painterly effect", and will undoubtedly return to this video as it focuses on that particular method of treating a transfer. The info comes at the viewer at a good clip, so I'll be re-watching with pen and paper at the ready.
@bluelavaart
@bluelavaart 2 месяца назад
Yay! So happy to hear this Shannon
@photoking100
@photoking100 6 месяцев назад
Thank you so very much for this video! I have been having a lot of difficulty with doing transfers, but have made some progress after watching this. Your suggestions are working well, but I am only getting any success at all with my sketch like images, but would love to transfer some of my own photos. I have been very selective in which images I try, and they seem to be of high contrast, but do not transfer in the way your storefronts do. I would appreciate anymore suggestions. And again, thank you for helping me to make progress! I love your work.
@bluelavaart
@bluelavaart 6 месяцев назад
It might be the amount of paint on your gel plate. Is there no image appearing and all the paint sticking to the photo or is the paint remaining on the plate? It could also be the amount of pressure. I posted a short last week that might be helpful ru-vid.comvFsnONx79Fo?feature=share I sometimes get ones that I think will work great but then don't transfer. It can be frustrating
@bluelavaart
@bluelavaart 6 месяцев назад
and thank you so much for your kind words
@jlcum453
@jlcum453 4 месяца назад
Thank you for showing how to use your own photographs, which is why I wanted to learn gel printing. I wasn’t have any success transferring magazine images let alone mine . Just purchased a laser printer, hope this works.
@bluelavaart
@bluelavaart 4 месяца назад
Glad it was helpful! It is a tricky process and takes some small tweaks to get it right. Have fun
@trdewey
@trdewey 6 месяцев назад
Loved this video! Sometimes if you have an area that is sticking and peeling, you can add some matte medium and put your paper back down. Wait a bit, then see if you can salvage the area. Of course painting over it or collage works too! I love using my own photos in this transfer process!
@bluelavaart
@bluelavaart 6 месяцев назад
Thanks so much! That is a great tip. that little bit extra of medium could really help
@trdewey
@trdewey 6 месяцев назад
@@bluelavaart it doesn’t always work, but sometimes the gelli -plate gods come through. I love how you paint over the background to create a very painterly work.
@bluelavaart
@bluelavaart 5 месяцев назад
Thanks so much. The plate gods are finicky
@Blessed_by_Yeshua
@Blessed_by_Yeshua 5 месяцев назад
Thank you. And I honestly would have liked to have seen you do the dolphins in water in that one photo transfer. A little old style with a lot of whimsy and movement.
@bluelavaart
@bluelavaart 5 месяцев назад
Next time! perhaps! Thanks so much!
@valef9460
@valef9460 5 месяцев назад
Thank you so much for the great tutorial. Will you also experiment with photos of people? I would like to see what you do with them. Thank you! 😊
@bluelavaart
@bluelavaart 5 месяцев назад
You are welcome! I will try with people. Sounds fun
@valef9460
@valef9460 5 месяцев назад
@@bluelavaart thank you, looking forward to it!!
@tinagreene7158
@tinagreene7158 6 месяцев назад
This is a great video! Thank you. You've opened my eyes to some new techniques that I'm excited to try. One Q for now: When printing inject photos, should I print on glossy photo paper or plain paper? Appreciate you sharing your knowledge with us
@bluelavaart
@bluelavaart 6 месяцев назад
So happy that you found it helpful. - Ink jet uses ink whereas laser printers use toner. The toner works better for this but some people do it with ink jet as well . Toner has plastic in it which repels the paint and makes this process work. So use laser and I print them on regular printer paper, not glossy.
@lindalavid
@lindalavid 5 месяцев назад
Yikes. Great job!!!!
@uglyartcountstoo
@uglyartcountstoo Месяц назад
Thanks!❤❤❤
@bluelavaart
@bluelavaart Месяц назад
You're welcome 😊 Thank you much. Greatly appreciated
@guizachristiane4824
@guizachristiane4824 12 дней назад
Stonepaper is the best for this kind of printing
@bluelavaart
@bluelavaart 11 дней назад
I use it in my journal but never thought about it for printing. Thanks for the tip
@c.goedhart2470
@c.goedhart2470 4 месяца назад
Love your tutorial! Question: What kind of White Paint Marker you use?
@bluelavaart
@bluelavaart 4 месяца назад
It is a white gel pen 🖊️
@lisadumas7019
@lisadumas7019 4 месяца назад
What version of PS are you using? Love these videos, thanks.
@bluelavaart
@bluelavaart 4 месяца назад
The latest version / Creative Cloud
@MJGave
@MJGave 6 месяцев назад
Thank you so much! I am so intrigued by this process and want to give it a go. So for the final layer you use either gel medium OR white acrylic? When would you use each method?
@bluelavaart
@bluelavaart 6 месяцев назад
I am so happy your found it helpful. I would use gel medium if I want the color of the paper to show through, or have more transparency. I use white if I want a bit more brightness and opacity for the transfer. I also use other colors and that is just based on experimenting. Good luck :)
@mjceramics5552
@mjceramics5552 6 месяцев назад
! @bluelavaart That's very helpful. Thank you!
@63viet
@63viet 6 месяцев назад
Thank you for your tutorial videos. Can you use acrylic gouache or gouache for gel printing? Thank you in advance for your advice.
@bluelavaart
@bluelavaart 6 месяцев назад
You are welcome! You can but I don't think they work well for image transfers. There are a lot of media that you can use on these plates though.
@jcarson7574
@jcarson7574 4 месяца назад
I missed why was the gel medium used at one point? Your video is the first I've seen where you've used a brush, thats a great idea! Really great video! I'm so excited to get started! This is my first day even looking into all of this but just had a thought, have you ever tried rolling a glass over the gel plate? I'm just thinking of all the possibilities! Oh wow! The white paint marker!!! Thanks again for sharing this!
@bluelavaart
@bluelavaart 4 месяца назад
The gel medium sometimes helps the acrylic paint from pooling when it is applied with a brush. I usually will cover the photo transfer layer with a coat before I start in with the paint brush.. I don't know if it would work with glass. Let me know if you try it out! Thanks!
@jcarson7574
@jcarson7574 3 месяца назад
Thanks!!!
@gillyb44
@gillyb44 6 месяцев назад
Thank you very much excellent demo. Ive tried endlessly to use my Brother laser printer, but always have a fail, even putting it through twice. Can I ask what laser printer you use. Many others use Brother and not good results. Cheers.
@bluelavaart
@bluelavaart 6 месяцев назад
I use a Triumph Adler. It might be a problem with the resolution of your prints. Is there no image appearing and all the paint sticking to the photo or is the paint remaining on the plate?
@arri1cook37
@arri1cook37 6 месяцев назад
Love love love!!!! Subscribed and ready to play, but I NEED A LASER PRINTER RECOMMENDATION, please 🙏. I am very determined and missing that one key ingredient.
@bluelavaart
@bluelavaart 6 месяцев назад
I’m definitely not an expert on types of printers. But I can say that the quality of your image including the resolution and contrast probably play a greater role, then the type of laser printer.
@arri1cook37
@arri1cook37 6 месяцев назад
@@bluelavaart Noted, and thank you so much.
@jacarandasprit5357
@jacarandasprit5357 3 месяца назад
Thank you for all the specific information. Painting sections after the image is made looks amazing. I'm really struggling. I don't have a laser printer, so I went to a local big box office supply store where they said all of their printers were laser printers. When I pull the imaged paper off of the gelli plate it picks up all of the paint...no image left behind. (like the photos you show at the beginning of your video). I used different thicknesses of paint thinking that could be the issue, but same result. I pulled a page from a magazine - not high contrast - but it did at least create an image. Do you think the prints I made at the store were not really printed with laser print toner??? Thanks!
@bluelavaart
@bluelavaart 3 месяца назад
It could be the prints from the store. I have heard others have had similar problems. Perhaps they are printing on an eco mode that doesn’t require much toner. So frustrating.
@jacarandasprit5357
@jacarandasprit5357 3 месяца назад
@@bluelavaart Thanks - I just had some printed at a different copy store - we shall see what happens!
@thestourvalleysynthesizerc6543
@thestourvalleysynthesizerc6543 4 месяца назад
I really enjoyed this video and the results that you got. I got a 6"x6" gel press plate for Christmas and gave it its first try out today. I tried a photo print and underpainting one as I really like the look of that but results were not on par with yours. Do you wait for the underpainting to dry before you add the white acrylic and bayer that over everything and then place the paper/card over? I didn't and the white sort of blended a lot of the other colours (not all). Thanks
@bluelavaart
@bluelavaart 4 месяца назад
Yes, make sure all of the layers are dry before working on the next. Otherwise the colors will blend and possibly start to lift off of the plate. It takes a fair amount of experimenting. I hope that helps and enjoy your new plate.
@thestourvalleysynthesizerc6543
@thestourvalleysynthesizerc6543 4 месяца назад
@@bluelavaart thank you :)
@ptorpie
@ptorpie 21 час назад
HI Jessica, I love what you do with Gelli plate photo transfers. I have watched your video a few times and have not been able to get any kind of phot transfer to the Gelli plate. Im thinking it may be the printer Im using which is a stand office laser printer/copier. It uses toner and it will print the photo in half tone but there is no photo setting for the printer. The prints just don't transfer. I also tried by inkjet photo printer and that totally didn't work. How can I get a decent print to work with the printer or do I need to find a fancier laser printer? Thanks for any tips
@bluelavaart
@bluelavaart 4 часа назад
It is hard for me to day. The more toner on the plate the better. If you try to do a magazine transfer and that works, you can eliminate the amount of paint and quality of paint as an issue. Have you tried runing the print through the copier 2xs to add more toner?
@sarahobrien9495
@sarahobrien9495 6 месяцев назад
Hi. Did you use Matt or gloss gel medium? Great tutorial 😀
@bluelavaart
@bluelavaart 6 месяцев назад
Satin medium 😊thank you
@alejandroreyesloa1231
@alejandroreyesloa1231 5 месяцев назад
Hi Jessica, this is an incredible tutorial to get started with transferring images. I have one question about it, in the minute 21:00 you transfer an image then add some gel medium, put some paper over it and some books, my question is, this process will not pull off the image when the paper is removed? and how long did you leave the books over until you remove them? thanks for your answer and thanks again for this wonderful and helpful tutorial! 👏
@bluelavaart
@bluelavaart 5 месяцев назад
I put the gel medium on after the black from the image transfer dried. However, you found a glitch in my video. The books and paper go on after the reverse painting. You are the first person to tell me about it. Thank you!!! I totally didn't spot that error. Anyway, I normally leave the books on for about 20 minutes then I will pull the paper when it feels dry. That could be 5 minutes or an hour. Depends on the thickness of the paint and the humidity.
@marlasinger413
@marlasinger413 13 дней назад
@bluelavaart how many minutes it takes to drying? Is gel plate reusable or not?
@bluelavaart
@bluelavaart 13 дней назад
You can reuse it endlessly! It depends on how many layers of reverse painting for the drying time Sometimes overnight
@MckinleyWileyDRC
@MckinleyWileyDRC 4 месяца назад
🙂This is amazing Jessica! Thank you for this. I’m sure you mentioned it already but after a few (several🥴) replays I’m still curious as to what specific kind of paint you’re using when you’re adding the colors (2nd layer). Is it just a good acrylic paint (i.e) what is used for transferring to the gelli plate?
@bluelavaart
@bluelavaart 4 месяца назад
Wonderful! Thanks so much. Usually, I go with Amsterdam and Liquitex paints, but Golden acrylic paint every now and then
@bluelavaart
@bluelavaart 4 месяца назад
Same as the image transfer layer
@connieborg7537
@connieborg7537 5 месяцев назад
This is an awesome video. Could you please tell me what type of paper do you print on. Thanks❤
@bluelavaart
@bluelavaart 5 месяцев назад
Thanks so much. Bristol is a slightly thicker smooth and very durable paper. I have been having a lot of success with this type of paper but it is not the only paper you can use.114lb 205 grams
@connieborg7537
@connieborg7537 4 месяца назад
Thanks for your prompt reply 👍
@cathleenvanbergen9356
@cathleenvanbergen9356 25 дней назад
Is double printing a laser print the only way to get best transfer to plate ? What is the best paper to print the image ? Is it best to pull image right away from plate? And is Bristol board best final paper?
@bluelavaart
@bluelavaart 24 дня назад
Here are my answers; Is double printing a laser print the only way to get best transfer to plate ? Yes. Some people have some luck with inkjet but it is a slightly different process. What is the best paper to print the image ? I use regular printer paper most of the time. Is it best to pull image right away from plate? During the image transfer part, yes, you want to pull it after some light pressure. And is Bristol board best final paper? That is what I prefer. I hope this helps
@Poetessa2
@Poetessa2 18 дней назад
Can you use plane glaze as opposed to the gel medium I think it's called?
@bluelavaart
@bluelavaart 18 дней назад
It depends on the glaze. I don’t think it will be as effective though. Gel medium has an elasticity to it that helps appeal off of the gel plate.
@Poetessa2
@Poetessa2 18 дней назад
@@bluelavaart Thank you! I'll be ordering the gel medium!
@krimimimi
@krimimimi 4 месяца назад
great video. especially the try and error process. ive been through all the steps over and over again but nothing worked. unfortunatly home laser printers (at least newer models) dont work with the transfer technique because the toner for home laser printers is modified for homeuse. professional laser printers and giant copy machines still work with the 'old' toner technique and so very well for transfer. i wanted to get this work so bad 😢 also tried double printing but home lasers dont line very well on multiple prints.
@bluelavaart
@bluelavaart 4 месяца назад
I know it can be really frustrating. Check to see if you are printing on an eco mode that saves on toner. Also, I am working on a detailed video about this process and some things that could help. I hope to have it posted this week. If you like, you can subscribe and turn on notifications,
@krimimimi
@krimimimi 4 месяца назад
@@bluelavaart i tried everything in your video. i live in germany i have access to all the tools you are using. but still no success. i tried everything form 1 to 5 layers of toner. also matt medium to get it stick. but nope. different brands of plates. still no transfer. magazine pages work perfectly fine. looking forward to the new video :)
@bluelavaart
@bluelavaart 4 месяца назад
I posted the video. I hope this helps 🤞🤞🤞@krimimimi
@rweems5796
@rweems5796 4 месяца назад
What if have an ink jet printer? Is it possible to take photocopies of the inkjet printed image and use that?
@bluelavaart
@bluelavaart 4 месяца назад
Laser Printers use toner that has plastic bits in it. That’s what repels the paint. Some manage to get it to work with ink jet but not easily
@brendabeeneshackleford9157
@brendabeeneshackleford9157 6 месяцев назад
Thanks so much for such a detailed explaination and demo. Laser paper. Do you have a link to your source of HP Premium. Can't seem to find the exact weight (80 gms) and brightness finish (170). Thanks so much.
@bluelavaart
@bluelavaart 6 месяцев назад
I bought mine off Amazon here in Germany. Anything kind of similar would work
@brendabeeneshackleford9157
@brendabeeneshackleford9157 6 месяцев назад
@@bluelavaart That explains it:) We have a 90 gm, so I'll try that! SO EXCITED!!!!
@catflap001
@catflap001 2 месяца назад
Hello. Does it have to be laser print or can inkjet also work? I can't afford a LaserJet printer and there aren't any print shops where I live.
@bluelavaart
@bluelavaart 2 месяца назад
Ink jet uses ink whereas laser printers use toner. The toner works better for this but some people do it with ink jet as well . Toner has plastic in it which repels the paint and makes this process work.
@winniepeg9869
@winniepeg9869 3 месяца назад
At 13 mins in you paint the gelli plate. Do you wait for the paint to dry (1st layer) before painting over the top with the next colour? It only just struck me at 13 minutes in though you used the same technique earlier. I got a gelli plate for Christmas which I want to have a play with’ … when I find a clear table to work on! I love your prints. I haven’t done any printmaking for 30 years or more. The gelli plate technique looks exciting! I’m only 13 minutes in and looking forward to seeing what happens next!
@bluelavaart
@bluelavaart 3 месяца назад
Thanks! Yes. I let the image transfer layer dry before adding more paint. Let it dry between layers. Have fun
@paulinelarson465
@paulinelarson465 5 месяцев назад
Would transferring work on fabric, like T-shirt or canvas ? With fabric paint ?
@bluelavaart
@bluelavaart 5 месяцев назад
Apparently yes. I haven’t done it. You need to mix a fabric binder into the paint
@63viet
@63viet 6 месяцев назад
Could you advice what materials are needed (not too expensive).
@bluelavaart
@bluelavaart 6 месяцев назад
Amsterdam paint is the one I can recommend. It is mid range price. Good luck :)
@gillmccowen4631
@gillmccowen4631 2 месяца назад
Does this technique work with InkJet prints or does it have to be a Laser print?
@bluelavaart
@bluelavaart 2 месяца назад
Laser Printers use toner that has plastic bits in it. That’s what repels the paint. Some manage to get it to work with ink jet but not easily or at all
@arielkellogg88
@arielkellogg88 23 дня назад
Can you share the brand of laser printer you have? We don't have a color laser printer at school.
@bluelavaart
@bluelavaart 23 дня назад
It is a Triumph Adler. However, i have heard Cannon works well
@selfiopath1982
@selfiopath1982 5 месяцев назад
6:40 I found that leaving paper for more than a minute results in some 30-40% of the paper stuck to the plate for good, which ruins the whole print. I use liquitex basics, Amsterdam, W&N Artist grade and a 160gsm smooth printer paper on a Gellie Arts plate. I also use Matt medium or acrylic medium (instead of gel medium as in your case). Basically I follow each of your step and your timing, but my prints gets stuck to the well-seasoned plate. Why? I’d love to hear your thought please please please 😊
@bluelavaart
@bluelavaart 5 месяцев назад
I sometimes even leave the paper on overnight! I think that last transfer layer is the key bit. Since I do a fair amount of layers before the transfer layer of paint or gel medium, I tend to do a very thick transfer layer. I am using 250 gr Bristol. That might be the issue. Good luck
@robynroth8033
@robynroth8033 2 месяца назад
How long do you wait for your transfer to dry before painting on it?
@bluelavaart
@bluelavaart 2 месяца назад
until it is dry to the touch. Typically only a couple of minutes
@larawallace7319
@larawallace7319 Месяц назад
Help! I need to know what printer you are using my lazer prints are not working
@bluelavaart
@bluelavaart Месяц назад
I am using a triumph Adler. However, I think it might have to do with the photo editing before you print them. I have a whole other video on troubleshooting laser prints. Check that out.
@jingsumfan7052
@jingsumfan7052 7 месяцев назад
Are there any alternative to gelli plates like lino?
@bluelavaart
@bluelavaart 6 месяцев назад
Speedball makes one that I use in the beginning. But I think the Gelli one works better for image transfer. People have diy-ed them at home too
@manaloola2018
@manaloola2018 3 месяца назад
Great video, thank you! But please what is the trick to getting an image to transfer. I’m about ready to give up. It can’t be hit or miss. There has to be some reliable method
@bluelavaart
@bluelavaart 3 месяца назад
I recently put up another video that shows lots of reasons why your images might not be transferring and how to solve it.
@bluelavaart
@bluelavaart 3 месяца назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EqHEswiFoZs.html
@manaloola2018
@manaloola2018 3 месяца назад
@@bluelavaart thanks I’ll check it out
@ingunnelverum
@ingunnelverum 6 месяцев назад
Speedball plate distroyd my happyness in the beginning of my gelliplate carriere. 😢 But then I order a GELLI plate ,and at last I love to print.
@bluelavaart
@bluelavaart 6 месяцев назад
Yes, same here! I struggled so much in the beginning. I bought the speedball because I generally like the brand but in this case Gelli for the win!!!!
@elmo0206ify
@elmo0206ify 3 месяца назад
Can inkjet printer work for this.
@bluelavaart
@bluelavaart 3 месяца назад
Toner works better because it has plastic in it which works for this process. I’ve never been able to do it with ink jet, but some people have had some success with it.
@user-jk5tb3zz1n
@user-jk5tb3zz1n 4 месяца назад
So many questions - have tried this with inkjet printer but no luck whatsoever. I can try to use a laser printer but I have to go somewhere else to have my photo printed out. Will that still work? Can the prints be a couple of days old?
@bluelavaart
@bluelavaart 4 месяца назад
The prints can be old. I have use several months old print outs without an issue. Ink jet doesn't work well or at all for this process. I just made a tutorial about laser prints. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EqHEswiFoZs.html
@dogdonut3
@dogdonut3 6 месяцев назад
Do most people use black for the first layer of paint on the gelli plate?
@bluelavaart
@bluelavaart 6 месяцев назад
You can use other colors but the black works quite well.
@dogdonut3
@dogdonut3 6 месяцев назад
@@bluelavaart Thanks
@jte5783
@jte5783 5 месяцев назад
Acrylics can be mixed with water, but is that something that would work on a plate? If one wants less vibrant colours, more subdued.
@bluelavaart
@bluelavaart 5 месяцев назад
Yes. But I would suggest using a gel medium to help thin the paint without it being runny
@jte5783
@jte5783 5 месяцев назад
@@bluelavaart thank you for the tip!
Далее
141. Inkjet gelli plate transfer: YES YOU CAN !
11:56
UZmir & Mira - Qani qani (Snippet)
00:26
Просмотров 436 тыс.
Все мы немного Адриана 😂😂😂
00:11
Taty’s Tate Late 5
8:15
Просмотров 1
Taking care of your Gel Plate  - The basics
13:29
Просмотров 17 тыс.
Monotype with acrylic on gelli plate
14:49
Просмотров 188 тыс.
Inkjet Photo Transfer With Gelli Plate
2:50
Просмотров 67 тыс.
Gelliplate multiple layer image transfer With Lucy
24:09
UZmir & Mira - Qani qani (Snippet)
00:26
Просмотров 436 тыс.