Gen 3 LS Swap Tune DIY with HPTuners

Подписаться 17 тыс.

Просмотров 17 тыс.

50% 1

This video is on how to build your own LS Swap tune for first start. There is more to it than just disabling VATS!
For remote tuning, Scanner Layouts, etc :
tuning-tips.com
(Highly recommended) Link for cheap but good bench harness: amzn.to/46mliOj
Join this channel to get access to perks:
/ @matt_sanford
Need to purchase an HPtuners Interface?
Use this link: amzn.to/3RKqQ0H
Need a good Wideband for your Gen 4/5 vehicle?
Use this link: amzn.to/3F7enMU
Link to a good yet inexpensive book on the principles of tuning:
amzn.to/3PZxdL6
Remote tuning email: SkyeTuning@gmail.com

Авто/Мото

Опубликовано:

25 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@twadam5218 Месяц назад

Really appreciate your videos and going into details for a new swap starter files and to explain why you do certain things. Thank you !

@Sante419 9 месяцев назад

Im glad I came across this, I’ll be trying to start my swap in the morning

@patrickthibodeaux8885 7 месяцев назад

I am glad I came across your RU-vid channel. You have helped me tremendously

@LynnTwinCustoms513 9 месяцев назад

Just found your channel! Enjoying the videos

@luiscarrasquillo9743 9 месяцев назад

Highly appreciated what you have done here my friend. I just got my HP tuners and been watching many videos but this by far nails it 💪🏻👍🏼🫡

@scottlowrance1552 3 месяца назад

Great info. I want to start tuning my own.

@georgenettlesjr1466 5 месяцев назад

Thanks for all that information! I'm new to this I really didn't know it was that serious😂

@Mexicanrambo 10 месяцев назад

Watching all ur videos to help out with view time cant wait for the gen v stuff

@robinfair8695 24 дня назад

Excellent vid thankyou

@shawnmanuel2486 5 месяцев назад

Awesome video very informative and useful.💪🏽💪🏽💪🏽

@squiggii4462 3 месяца назад

Awesome video

@levih.4252 8 месяцев назад

Great information, thank you.

@BrandonJones-iz6jn Месяц назад

Got any videos on turning camed gm trucks 00-07? Really like the video I’m new to tuning looking for all the info I can get

@Zooping67 6 месяцев назад

Hey really appreciate your videos. I have just got into tuning and your videos are super easy to follow had a question is there anyway you could put out a video on a manual trans swap. I have swapped about 5 trucks so far and have done either a sm465 or nv450p behand all of them and it seems that when i change trans to manual it dosent rev up right and seems like it takes a long time to come back down to an idle on a free rev.

@donnieschwartzjr9370 6 месяцев назад

I have just started watching your videos. Very helpful information. Gotta question. I can't seem to find much information on ls swap start up/tuning for a 5-speed manual. Most videos are for an automatic. What are the differences? Thanks again.

@cwmotorsports4497 6 месяцев назад

So freakin helpful

@jonathanmarton384 10 месяцев назад

Very helpful

@tennesseetreasures124 10 месяцев назад

Thanks !

@twadam5218 28 дней назад

@Matt Sanford should we by disabling DFCO or PE while dialing in the VE table ? After running through this process I see in the log that the PE modifier is constantly changing the commanded EQ based on the PE modifier. With all the settings in place from this video, it seems the System Status stays in Open Loop (not engaging PE), but yet the EQ commanded is constantly changing (ie., not static at the 14.08 Stoich from the video) ? Am I missing something ?

@michaelperez9015 2 месяца назад

Just watched your video I have a 2005 Chevy Suburban four-wheel drive and I just did a stage 2 cam will this tune work the same way with the cam

@matclark9456 5 месяцев назад

Just curious , what would happen if you an ecm that came off a vacuum guided fuel and you put a dead head without changing tune

@Luis-fq9gm 8 дней назад

LS duty cycle fan control is it possible vs full on, current setup GenIII 6.0 2002 C2500 with two off the shelf fans and derale controller but it can handle only 35 amps per fan, but would like to install two fans from ford pickup truck using duty cycle controls to avoid running them at full speed thus less noise. Thanks.

@GnarlyBlade 2 месяца назад

At 7:17 when you explain the engine size, is that “OHV 5.3L” greyed out because that’s what’s in the file it read of the ECU? And if I was swapping in a 6.2L for example, on the “stock 5.3 file” like you have in the video, I’d update the cylinder volume as you did for your 6.0L example and that’s it as far as telling the ECU it’s a “6.2L” not a 5.3

@Spxrc 10 дней назад

What about when is a trans swap? Only have to put manual in the transmission side?

@rockabichebel 6 месяцев назад

Hello how are you happy new year I have l96 6.0 stock injectors vvt deleted Running on 24 x reloctor on gen3 ecm p01 Maf deleted What is best tuning I can use for this engine plz?

@vortecturbo 2 месяца назад

Always understood that if you turned off the short-term fuel trim open loop and disable it that it would not affect fueling when you're at wide open throttle if you left it enabled it would trim on your wide open throttle fueling

@crank1422 7 месяцев назад

If you have set off VATS, is there any way to get the ECU to work again?

@kennedywong9854 4 месяца назад

How can hp tune ls swap on 240sx with 5.3 lm7, ls1 fuel injectors and intake manifold with 102 throttle body, and t56. What changes do i need to do ro make it run perfectly correct?

@Jesseybarra934 5 месяцев назад

How do you make changes if your engine was dbw to dbc

@ColtonSteffen 2 месяца назад

I have my 5.3 adapted to a world class T5 5 speed. Are there any changes that are critical to make for this to run correctly? In the Transmission section I see that there is an option to change it from a l460e to a manual transmission - can it really be that easy?

@dannyaustin7124 3 месяца назад

What about drive tuning? If you have a stall what would I need to update?

@Guidi815 Месяц назад

Runs a tad better but I think I got a bad sensor or something different, Anyway I could email u log file and dtcs for a gander?

@jaymurray92 2 месяца назад

Is this different from the drive by wire green and blue?

@RichardAlfred-us8ge Месяц назад

Will this be same for GENIV

@kennedywong9854 4 месяца назад

Can you send hp tuner swap file for 240sx ls swap 5.3 lm7 motor with t56 tranny.

@Wilson-kd2sl 7 месяцев назад

The table for Flow VS kpa. If you are not running a vacuum reference, is there any way to know how to scale the table instead of it being flat line? I know that scaling would be depending on the injector but was wondering if there was a math formula or anything to figure it out

@Matt_Sanford 7 месяцев назад

Usually you can find that info in the data that hopefully come with your injectors or you can reference a vehicle that doesn’t have vacuum reference but has the same injectors if they are factory. C5 Corvettes, F-Body Camaros, and 2004-2007 Classic trucks have non referenced data.

@Wilson-kd2sl 7 месяцев назад

@@Matt_Sanford 👍 Thank you for the reply

@fildavis118 9 месяцев назад

Under fuel injector flow rate with a dead headed system I don't understand why the injector is flowing more with a higher kpa in the manifold? The vacuum is less at a higher kpa so the injector should be flowing less due to lack of help from the vacuum. Unless the voltage going up is what is helping the injector flow more? But isn't that due to a variable voltage fuel pump? So a none variable fuel pump won't make the pressure go up when the voltage goes up. New to tuning and trying to learn. Thanks for the video.

@Matt_Sanford 9 месяцев назад

The axis is Manifold Vacuum, not atmospheric pressure. When it references 80kpa, it’s not 80kpa of atmospheric pressure, it’s 80kpa of vacuum or approximately 20kpa of atmospheric pressure (depending on your location of course).

@fildavis118 9 месяцев назад

Thanks! That helped.@@Matt_Sanford

@jasonhastings5538 7 месяцев назад

What all will a person need to get goin with HP tuners?

@jasonhastings5538 7 месяцев назад

I have a 99 5.3 truck id like to swap the drive train in to a 79 foxbody!

@mikenowotny3244 3 месяца назад

Will this work as a safe way to start a rebuilt motor and do break in? I don't want to blow my cam and will need to seat the rings, no reputable dynos in my area. Rebuild 2002 6.0 to a 408 stroker with a mild cam and Fast intake.

@Matt_Sanford 3 месяца назад

This tuning video is more for a stock engine. The process is similar for yours but you have some things that will definitely need further tuning.

@mikenowotny3244 3 месяца назад

Thank you for getting back to me. With your videos as well as several others I feel confident I'll be able to tune the engine Maf, timing and speed density in the correct manner. I figure I'll need to obviously change the cylinder vol. to match my engine. I'm hope to get advice from an experienced tuner on what baseline to start from. I've considered that because I have more cu in I'll need more fuel and air otherwise I risk not being able to start. Probably increasing both by the same percentage as my increased cu in. I've been told that during that first half hour while the cam is breaking in and the engine is coming up to temp is when I need to set my idle and see how far off my mixture is. Being a little bit lean won't damage anything given I'm just idling and at the other end I don't want to be hugely rich and wash the cylinders. Is there anything else you are aware of that should be adjusted for first start?@@Matt_Sanford

@smoovsavage7084 2 месяца назад

@Matt_Sanford how much do you charge to do a ecm

@jsbird98 9 месяцев назад

New MPVI3 owner, cant turn off my rear o2's am I missing something? I can highlight the codes but can't check off the ses light nor switch it to none reported. Any help is appreciated.

@Matt_Sanford 9 месяцев назад

Yes you need to read through and follow the steps on: www.hptuners.com/emissions/

@jsbird98 9 месяцев назад

@@Matt_Sanford yeah I took the training and got everything unlocked 😎