Genmax GM10500iETC Paralleled 

Gavin trying to power the entire neighborhood. 😂

Two of them provide almost as much as Kw as my whole house generator ⚡️

I would love to see this running your house, then try running a couple big items at one time.

Sounded way more quiet with 2 at that load. like that they can parallel. I hope to have one or two of these in the future

A Monster Set-Up!!

Can you try using remote start with 2 generators? See if they have a unique ID and make sure one remote doesn't start both or the wrong unit.

Question: I have a dedicated 1inch NG line coming off the meter. If I run these parallel will I have sufficient supply (pressure) by simply installing a “T” that splits to two (2) 1/2inch quick connects? I want this set up cause it will handle my winter needs with one unit then run two in parallel when cycling thru out four (4) A/C units in summer. PLUS, if one of the generators gets “sick”? I got a backup! Thanks so much for your efforts in these videos. I am a new subscriber and am finding your channel to be very balanced and quite helpful! well done….

Hey Gavin, do you know what happen with this GenMax ATS ... You said that they were going to release it...

How does it work? The current from the gen on the left passes thru that cable and out the receptacle of the other gen? You connected the parallel cables after they were running? Is that the proper way? Wouldn’t they be out of sync and that could cause issues? Never messed with parallel portables, just trying to learn.

Love your store! Is the parallel connector the same on the 7250iEDC? Can a 7250iEDC be paralleled to GM10500iETC? Thanks! Edit: Looks like the Genmax website says the parallel kit GM9000PK will connect to both, but feel free to confirm.

New subscriber, searching for my 1st generator. I have a few questions, hopefully you can help. I have a 1,300 sq ft townhouse with one 2 ton a/c unit. Will one of these allow me to run my entire home? I have a tuck under garage and was planning on building a sealed shed with a baffeled vent system outside for two reasons - 1) keep the noise down for my neighbors 2) security. All of the generator sheds I see on RU-vid, they have a vent for the exhaust and one for the generator? Wouldn't the vent be sufficient enough to vent the exhaust too? I plan on wifi CO and temp monitors inside and outside the shed for safety. The shed would be vented outside the garage through a glass block window.

So I noticed when one generator is running, you’re getting 240 volts. However when you parallel and have both running, both generators change to 120 volts. When they are paralleled and both putting out 120 volts, are the two generators still out putting a true 240 or is it 120 volts in the same phase?

I see one of these in my future. But what kind of warranty service does Gen Max provide?

So I have this generator and can't get a 50 amp generator chord to seat correctly in the 50amp outlet. The ridge below it protrudes so the plug will not seat. Can't find an inline 50 amp male plug chord.

Nice job 👍 generator RU-vid videos

Were both only putting out 3.6Kw each? How do you pull full wattage when paralleling?

So when you run on natural gas an propane is that just never-ending fuel?

Hey Gavin, I have 2 Honda 7000 Watt generators, and I want to know if I can use the L14-30 from each unit to the transfer switch on my food trailer? This would be using a y-adapter with 2 L14-30P to SS2 50R. PLEASE PLEASE LET ME KNOW IF THIS IS POSSIBLE. THANK YOU.

could one genmax power that heater safely by itself? i read where it won’t do the full 50 amps without a parallel kit…kinda sucks to be honest

Which is better to power whole 50amp 5th wheel? 2 7250(parallel) or 2 10500(parallel)

I’m not going to lie, I have a bit of generator jealousy. 😂