GENMITSU 3030 PROVer MAX Desktop CNC, 300x300x78mm working area, 300W spindle, cutting aluminum 

Yet another end-to-end solid review! Can't say it enough: I love your matter-of-fact, straight-to-the-point, no-BS-just-good-content style 👍

Thanks! It gives a good idea of the machine's capability.

Thank you for the best Review of the PROVer3030 i have seen.😍

I just found your channel and you do a great job of reviewing machines clear ,honest and straight to the point and very knowledgeable

i been running this machine for a while, overall an excellent well built machine with a decent price tag, however the biggest downside is the weak 300w spindle. For wood they are absoletly fine but for a machine that is this ridge and advertised to cut soft metals it need something alot more. I personally upgraded the spindle to a 1.5kw spindle now can run metal jobs like it nothing even can cut titanium plates at okay ish speed. and it give me the opportunity to run 10mm end mills too with an er16 collet. Overall very happy with the machine very well build just wish it give you an option to buy a better spindle out of the box rather than wasting money on the 300w spindle

I never knew I needed something like this...but here we are.

Pro tip, you can use hot glue to help secure some of your materials down. Then use ipa to release it.

I watch to hear her say "today....."

Thankyou very helpful in my decision to buy one.

Hey there, with the Makita running at 4.5 the RPM is 25.000, so you roughly double the speed with the same gCode. More power, double speed, of course the gCode makes it easy, but it only shows the obvious evidence. To be fair and allow people to see the real difference between the 300w spindle and the wood router, you should have double the feed and speed of the gCode for the Makita (or divided by two the feed and speed of the Spindle's gCode or set the speed of the Makita to position 2) making parameters somehow equivalent. For your information, the optimal parameters for your 1/8"carbide bit in 6061 amuminium should be something like: _ 0.2in (5mm) depth of cut, so the bit should allow you to cut into you 0.125in (3.125mm) plate in one easy pass considering the 1.5hp of the router. _ 6370 RPM (Makita's speed 1 is 10.000rpm, not suitable for cutting aluminium) _ 15.3in.mn (388mm.mn) - BUT should be raised with the Makita to 23in.mn (610mm.mn) because of the 10.000 RPM. Can the machine stands it ? If yes, what about the cut quality ?

This side of the industry sorely needs someone like Bambu to just come in and do a lot of common sense things and more. This pace of yearly improvements is embarrassing.

Nice video. I'm impressed by the improvements they made to this type of CNC.

I've learned so much from your tech channel, thanks for your in depth reviews ☺👍🏻

another great review. Thank you.

you wont believe how clutch this is. i just got mine in and set it up but dont have much of an idea of how to use it. im sure this will be helpful. you really helped me how to use my 3d printer.

love the cnc videos. thank you

There is a V2 of this out. It has a number of improvements.

i'm sold!!! gonna buy one of these.. THX!

YEEEEE! Thank you for the review

Great review as usual 👍

Time to invest in a dust shoe and a shop vac to get rid of all those crumbs before they fly everywhere. 😀 They make one that fits this 3030 perfectly.

Great review.

15:30 I think you've just sold anyone watching this on buying a Makita Router. 😆

It could also be the 300w spindle with the collet has too much runout under load, Makita router is probably much better built to handle sideloading. My cheap machine with a similar 500w motor could not do profiling cuts at 0.3mm DOC in aluminium when I got it, now it can do 1-2mm easily as its only driving a separate spindle through a belt drive, same or less power but a more rigid spindle. It even handles milling steel now to a point.

I would really like to see a review of the Genmitsu 710W trim router with ER11 chuck vs. the Makita router on this machine.

It will probably take an extraordinary amount of time to do this but... are you guys planning on putting together a Milo V1.5? I'd be curious how a DIY bridgeport CNC mill compares to these kit gantry CNCs.

Nice video. Here's a few tips. You would get better results if the materials are mounted directly on to a solid surface. This will result in less chatter. Next time try the same cuts with a single flute up cut bit and set the milling to a convenientional cut.

good videos as always. a small thing regarding operation and execution of milling of workpiece. using air assist or adding liquid (alcohol) when milling helps. another thing is when you have to mill, you use a scrubber mill for all the rough and finish milling at the end with a slower feed and you mill clockwise as white as possible so the endmill has to do the job. another thing I saw was when you milled in wood that it does not move in the same constant movement around the object but constantly changes speed, can it be selected differently or is it in the software. ????

Another great review by Aurora Tech. You did not mention the RPM of the Makita router, do you know what it was? Thanks again.

Excellent review, as usual. I particularly appreciated you recent review on the Sovol SV08. Will you be doing one on the Peopoly Magneto X?

👍🏻👍🏻

Great review as always. Sad though to see no shipping to Canada. 😥

Hello! Tell me please! full PETG printing settings.On the Advenchurer 5M Pro printer

if i plan to work with brass on this machine, i dont understand how the makita router will be more precise than standard spindle?

What are some good programs I could use? (For beginners)

Great review. In my opinion, these desktop CNC machines will never become mills unless their frame is made with steel instead of aluminum extrusions. I would call them soft metal engravers at most but not milling machines. The good thing is that they are not advertised as mills but i just wanted to clarify that.

so, im confused. how do i take a g code from a software, and tell the machine where to start, using the offline controller? and , is the offline controller capable of doing multiple finishes with different bits?

how would one upgrade the motor to nema 23 with an adapter plate ? how to change stepper current ?

i notice aurora growing faster ....she's getting much cuter day after day 😍 ALSO the quality of the videos and reviews getting more and more better 😍🥰 so proud of u 🥰🥰🥰🥰🥰🥰

Can this plug directly into a PC and run with Candle? Or is the offline controller the only option?

Are any desktop machines capable of machining mild steel?

Mini cnc ve lazer makinesi arıyorum sizde varsa bana fiyatı ne olur

I love your videos, but please, at least you say it correctly... ALUMINIUM !!! please...