Тёмный

Genmitsu 4030 PROVerXL V2 CNC review: Nema 23 closed-loop stepper motor, ball screws, 400W spindle 

Aurora Tech
Подписаться 83 тыс.
Просмотров 39 тыс.
50% 1

Наука

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 96   
@victorbourdon2815
@victorbourdon2815 11 месяцев назад
I prefer the new way you are leaving the machine sound on while cutting. More feedback is always better.
@GreenOcean1990
@GreenOcean1990 3 месяца назад
Great Video. I purchased this exact machine and totally regretting my purchase. Very difficult to get help from manufacturer, some parts are modified such that you cannot replace them. For example the Z axis ballscrew nut has been modified to fit this assembly; making replacing by most DIYers nearly impossible. Not able to find a parts list anywhere nor from manufacturer. I am now considering buying a new machine as my Genmitsu machine has become a paperweight basically. Hope this info helps anyone.
@justinchamberlin4195
@justinchamberlin4195 11 месяцев назад
Aside from what looks like a wimpy stock spindle, this looks like a very capable machine. I would like to see at least some kind of adapter for a vacuum to remove chips so you don’t have to do it yourself periodically during operation (or after a job is done), though I’m sure one could be fabricated without too much hassle. As for the change in sound…it’s nice being able to hear more of what the machine sounds like while operating with different materials. At the same time, the music is much more pleasant to listen to over the course of a full video. Tilt the balance of time spent listening to machine noises and to music a little more in favor of the music, and I think everyone would be happy. Great review!
@whereswa11y
@whereswa11y 11 месяцев назад
hearing the sounds is VERY good for those who are new to CNC. Thanks very much.
@JohnColgan.
@JohnColgan. 11 месяцев назад
Review, you certainly know how to put it through its paces. Very thorough. Nice machine,mine has arrived, I hope to get it working soon
@Shorrey
@Shorrey 11 месяцев назад
Yes, hearing the sound give more info. I planned to upgrade to this machine, so thanks for a showcase and for confirming my choice.
@johntyrone307
@johntyrone307 10 месяцев назад
Best young narrator on RU-vid. Great job.
@brunohuang9367
@brunohuang9367 11 месяцев назад
Very detailed video of the machine test, thank you for sharing that.
@alexxustube
@alexxustube 11 месяцев назад
Finally a CNC review. Nice! 👍🙂
@Jestunes
@Jestunes 11 месяцев назад
Have not watched your channel in a while. Amazing you still look so young. Was hoping to see a little levity or laughing like you used to years ago. Still give the best advice and testing of new products. Wishing you and your brother well. Thanks for sharing and have a great day..
@rondlh20
@rondlh20 11 месяцев назад
OMG, you are unstoppable! Great job again
@davidconaway2830
@davidconaway2830 11 месяцев назад
Aurora, I like to hear the tool noise for a few seconds...then I love your background music. Another great review which undoubtedly helps many viewers, including myself.
@xConundrumx
@xConundrumx 11 месяцев назад
I don't even have to see the video to know I want to hear the machine sounds. It is the best indicator to judge how well a machine can handle the various materials. It allows me to judge chatter, spindle power issues (as in does it have trouble keeping up in RPM's on heavier loads) and much more. I would even go so far as to say it is a prerequisite for me as far as a good review goes.
@agustinrodriguez8481
@agustinrodriguez8481 3 месяца назад
Great review. Noticeable technical skills. Thanks for share.
@TestTest-eb8jr
@TestTest-eb8jr 11 месяцев назад
Solid review (despite the unusual mistakes); leaving the sound on definitly adds in a positive way.... 🖒🖒🖒@Aurora
@WarriorOfSIN
@WarriorOfSIN 11 месяцев назад
Like the cnc sound, music Is nice too but this way just hits different
@jasonwu2758
@jasonwu2758 11 месяцев назад
Forever known as the the Batman mill 😋. Great work!
@KenDilas01
@KenDilas01 Месяц назад
You can stop a lot of that vibration when cutting by adding support under the table. Nice review!
@3dPrintingMillennial
@3dPrintingMillennial 11 месяцев назад
I can't wait until Bambu Lab develops a CNC milling/routing machine.
@KenDilas01
@KenDilas01 Месяц назад
Ratrig now has one...
@Mambrax444
@Mambrax444 4 месяца назад
great video!
@martinkeats4429
@martinkeats4429 4 месяца назад
Thank you for leaving out the background music whilst speaking, for those of us who have hearing issues it is a lot more difficult to pick out speech with the background music.
@stevenichols1481
@stevenichols1481 8 месяцев назад
Awesome tests!! I hope you get the chance to review the 3030 prover max next!
@alpscraftshack599
@alpscraftshack599 10 месяцев назад
Nice video. It looks like an impressive machine. I have been using a MillRight Carve King (the original wood version), which is about the same size, about four (4) years now, without any problems. I am looking to expand my business and need another machine, so, I thought I would give this one a try and see how it compares to the MillRight Carve King. I 'pushed the button' the other day, Friday - Sept 16th, and ordered it.
@patrickmckowen2999
@patrickmckowen2999 4 месяца назад
Excellent 👍
@happyfuntimepewpew
@happyfuntimepewpew 11 месяцев назад
it’s always good to resurface your spoilboards to make sure they’re flat. if you really want to check out an efficient cnc router, look at the line of next wave cnc sharks.
@choschiba
@choschiba 10 месяцев назад
Wow, this thing is massive!!
@AuroraTech
@AuroraTech 10 месяцев назад
I am testing their even larger 6050 machine, will release the video this week.
@choschiba
@choschiba 10 месяцев назад
@@AuroraTech a friend of mine is assembling a CNC at our local Makerspace at the moment. I want to learn how to work with it in the future. I would like to create injection moulds for our Precious Plastic injection machine.
@chucklenz9011
@chucklenz9011 4 месяца назад
If you would make the rough cut at .03 /.004mm and then take a finish cut at say .002 you increase productivity and have a clean job.
@camleboy1287
@camleboy1287 11 месяцев назад
The new way of review is nice without music can this machine cut steel ? and thanks for this video as always great job
@omgfrankie
@omgfrankie 11 месяцев назад
Another excellent video! I have mixed thoughts on the music or machine sound. I like the music more. Too much machine sound makes me want to mute the video until the cut is done. Partial sounds maybe at start and end are nice. The whole time, jeesh I can get that noise from my own machines, don't want it blasting through my TV.
@PandorusFightStick
@PandorusFightStick 4 месяца назад
great review!! please review the Genmitsu 3030 Prover Max
@proaudiorestore8926
@proaudiorestore8926 11 месяцев назад
Im on the fence with the sound, it makes sense but I really didn’t like the jazz music before. It definitely makes sense though when reviewing CNC’s though. Thanks for the review!
@proaudiorestore8926
@proaudiorestore8926 11 месяцев назад
@auroratech, that should read DID like the jazz music before. Autocorrect decided to kick in there!
@paulklem9249
@paulklem9249 11 месяцев назад
I would have liked to seen or heard comments in regards to the ability to carve 3d form (2.5 D) , bas relief. I like the music in that it standardized and established a good format to where you were in the review. A sample of the sound or showing the machine run with no commentary at the end might work. Also; I’ve worked with professional engraving my whole life and rarely, when engraving metal, is it done dry. A small amount of cutting oil for steel or I’ve even seen the old timers use gasoline for aluminum. Very small amounts, and use an old toothbrush to clear the chips or an air gun.
@paulklem9249
@paulklem9249 11 месяцев назад
Great video
@ThoCoKhi181
@ThoCoKhi181 3 месяца назад
Thanks for review! It would be great if we had equipment to measure noise when they mill aluminum.
@TrogdorBurnin8or
@TrogdorBurnin8or 11 месяцев назад
In re: Your music - James Hoffman in his Coffee Creamer roundup just pointed out that if you have two factions of viewers that prefer a different type of audio (eg "Slurps" vs "Disturbing slurps edited out" or "Music over test" vs "machine sounds over test"), you can abuse the new RU-vid translation dub system to upload a second audio track if you like. Personally, I think I prefer machine sounds as long as test segments are edited down to these brief clips.
@RichardBronosky
@RichardBronosky 11 месяцев назад
That's a great idea.
@tweekFPV
@tweekFPV 11 месяцев назад
👍🏻👍🏻
@br5498
@br5498 7 месяцев назад
The sound of the bit helps in hearing bit noise
@JuanRodriguezArchitect
@JuanRodriguezArchitect 4 месяца назад
Would love to see a decibel meter to see the noise of various materials/various bits and various speeds. Would be interesting to see if higher speed makes the machine louder or more quiet. These are desktop CNC so noise is a big concern to some people.
@ericthecyclist
@ericthecyclist 11 месяцев назад
the specs are similar to a DIY I"m painfully building, except I've got wimpier openloop nema 23 motors. In your experience, are their deep nema 23's warranted? I'll have consider if I can convert my nema 23's to closed loop with some arduinos, if I experience skips.
@extraterrestrialtech
@extraterrestrialtech 11 месяцев назад
Welcome back to Aurora Tech channel. Today.. 🙃
@creepinonthebabes
@creepinonthebabes 11 месяцев назад
Todayyyy...
@landroveraddict2457
@landroveraddict2457 11 месяцев назад
Get yourself a small fly cutter for surface levelling. Or use a spiral out from the centre with an end mill.
@AuroraTech
@AuroraTech 11 месяцев назад
Can you suggest a fly cutter that fits with a ER11 collet and can work with aluminum? I have always been trying to find one. Thanks
@andrewearl9315
@andrewearl9315 6 месяцев назад
I ❤your channel and ask if it’s a default for your software to use climb milling versus conventional milling.
@landroveraddict2457
@landroveraddict2457 11 месяцев назад
I loath back ground music. I am not even found of intro or outro music. Creators rarely get the levels right. Don't be afraid of silence either, it's golden😉😉
@stevejones01
@stevejones01 10 месяцев назад
I like the sound of the machine in this video. However, the music works for me on 3D printers. :-). What post processor did you use in Fusion 360? I would recommend to use only carbide bits when cutting MDF. Nitrite coating is 100% marketing. It won't make a difference without coolant.
@creepinonthebabes
@creepinonthebabes 11 месяцев назад
you should have started the aluminum slots with the deeper ones closer to the vise jaw to minimize part flex. also i would be interested in a fusion 360 tutorial to make the gcode. i know how to make models just never used the CAM part.
@jonathanlawley4863
@jonathanlawley4863 11 месяцев назад
Titans of CNC has a free Academy with Fusion360 CAM lessons for each component. Milling and turning.
@basilloizou1942
@basilloizou1942 8 месяцев назад
Thanks for your great video ❤ I am want to use light burn but can’t because I can’t see a positive workspace on the front left would you please show me how to do this or do a video tutorial that would be amazing Thanks so much
@KZ-yy9pm
@KZ-yy9pm 11 месяцев назад
Hopefully they send you the 6050 plus next. As they did with the 4030 v2, the 6050 plus is larger and the construction steps up the accuracy as a result of design and parts used. It would make 3 videos and they you could make a 4th video with the content already shot to make a quick comparison video of all three. Also, Genmitsu where is the dust shoe?!?
@Ryxxi_makes
@Ryxxi_makes 11 месяцев назад
Do you have a fusion 360 machine setup/config guide ?
@Hangs4Fun
@Hangs4Fun 11 месяцев назад
Can you provide a link to your $1.50 bit?
@AuroraTech
@AuroraTech 11 месяцев назад
Just added under the video description. amzn.to/3YBdJjF
@dougyt261
@dougyt261 5 месяцев назад
I would be happy to sacrifice the close loop for some liniear rails
@rret6885
@rret6885 10 месяцев назад
anyone know where to purchase the double wide POM wheels? I have a machine like this and would like to have spares. Thank you.
@Gershy13
@Gershy13 11 месяцев назад
Neptune 4 pro review anytime soon?
@jonathanlawley4863
@jonathanlawley4863 11 месяцев назад
Need a bit of machining oil (or WD-40) on the surface to prevent overheating, which can destroy the tools. Especially with aluminum, which likes to stick to the tool.
@g.j.647
@g.j.647 8 месяцев назад
I have learnt to use spirit (in German "Spiritus") to cool and some kind of lubrikate, when milling or drilling aluminium. It also prevents aluminium particles to stick on the cutting edge of the tools. Love to hear the life sound instead of music. It gives me additional information.
@alankilgore1132
@alankilgore1132 11 месяцев назад
is that a vacuum attachment at 33:30? How did it work? You didn't mention it.
@AuroraTech
@AuroraTech 11 месяцев назад
That's a clip from another machine(Carvera auto tool chnager CNC): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zN7eEzAqI3A.html
@andax2007
@andax2007 9 месяцев назад
What is the most price worthy machine for routing aluminum?
@Boomchacle
@Boomchacle 7 месяцев назад
How's the machine holding up after a couple months?
@jcmdesigns101
@jcmdesigns101 11 месяцев назад
Just a heads up... If you don't have a tool in the collet you can potentially over tighten your spindle cap when you turn on the spindle. (Maybe only the case for the higher torque CNC machines, but the idea may still apply)
@xConundrumx
@xConundrumx 11 месяцев назад
Actually brings me to a good point. After checking the video I do notice there is a lot of thread left on the ER11 collet chuck when the tool is installed. A really common mistake is that people put the collet in the chuck (with or without the bit inserted in it already) and then turn on the collet nut. This is **not the correct way** to do it. You have to click the collet into the collet nut (just the collet no bit inserted yet). The collet has a groove and the collet nut has a ridge (on the inside) so the collet will click in place there. Then you can insert the bit and screw the lot onto the collet chuck. If you do not click the collet in place first the whole thing will be far less ridgid and secure causing extra chatter. Judging by how much thread is left unused on the chuck it looks like this may be the case.
@suelmerhi3993
@suelmerhi3993 3 месяца назад
Can this router cut a 1.25 mm steel??
@andrewearl9315
@andrewearl9315 6 месяцев назад
I think if you were holding the part closer to the base your results and finish would Improve.
@BleuCollarFndryMTL
@BleuCollarFndryMTL 8 месяцев назад
Another great video, I prefer your music. The whine is annoying.
@Festivejelly
@Festivejelly 11 месяцев назад
Where did you get the mini vise from? Looks useful.
@AuroraTech
@AuroraTech 11 месяцев назад
Here: amzn.to/3DYBBUU
@Festivejelly
@Festivejelly 11 месяцев назад
@@AuroraTech Thank you :)
@Manutp347
@Manutp347 11 месяцев назад
Bonjour, je vient de voir votre vidéo car je regarder un peut, je vient d’installer sur ma cnc 3040T-Q et le moteur de 800we me crée énormément de vibrations, j’aurais tomber sur votre vidéo plus tôt pour ne pas faire l’erreur, si je descend la vitesse il y a moins de vibrations, après la broche fait 800m/n donc elle a de la force
@user-lk8lg1ys5o
@user-lk8lg1ys5o 11 месяцев назад
Today was at G4#
@macvideoworld
@macvideoworld 10 месяцев назад
Can we use mach3 or mach4 to control this machine? I am looking for something really nice to control this machine than the free software that comes with it.
@AuroraTech
@AuroraTech 10 месяцев назад
No, the controller board is a GRBL board, so it just works with GRBL. Some machines have Mach version, but not this.
@goldensaw8489
@goldensaw8489 5 месяцев назад
Hello, how much does that device cost?
@tonyprice8108
@tonyprice8108 3 дня назад
Part of the reason for the excess vibration is the aluminum plate is unsupported in the area of the cut! The deeper cuts, our father away from any support. A rigid set up would remove much of this chatter.
@rsilvers129
@rsilvers129 11 месяцев назад
It’s still a tough sell for me with the tiny motor. I got an unbranded Chinese one with a powerful water cooled spindle and a much beefier frame.
@landroveraddict2457
@landroveraddict2457 11 месяцев назад
Can you post a link pls?
@Lucas_sGarage
@Lucas_sGarage 6 месяцев назад
im 95% sure that is you get a router11 from open builds or a 1.5kw Chinese spindle you will get much better results
@joeking433
@joeking433 Месяц назад
Your background music is overused, IMO. Keep it to a minimum. It is kind of cool that it's assoiciated with your channel. I've heard the same music used on other channels and I said, hey, that's Aurora's music, LOL!
@KnotHead1008
@KnotHead1008 11 месяцев назад
The new format is better. I would however like to see these machines work with brass.
@stunod-RC
@stunod-RC 10 месяцев назад
Brass is much easier to machine. If it works on aluminum, it will do better in brass.
@bermchasin
@bermchasin 10 месяцев назад
8:20 - aint one of us here who havnt made that mistake
@ArneRagnarsson
@ArneRagnarsson 7 месяцев назад
The whole board ar shaking
@RandomAudioGuys
@RandomAudioGuys 11 месяцев назад
That is some seriously low quality MDF. I was surprised because I thought it was partical board with such big pores.
@krukhlis
@krukhlis 11 месяцев назад
Cutting Aluminum without Mist coolant or (at least) proper fluids is really bad idea.
@dtroy15
@dtroy15 11 месяцев назад
Says who? This isn't HSM.
@jimjames7479
@jimjames7479 11 месяцев назад
your fixturing is too weak. the plate should be rock solid. plus your stick is way off.
@cokecamilo
@cokecamilo 2 месяца назад
Is Aurora a child? lol what
@Factory400
@Factory400 11 месяцев назад
That thing vibrates like mad. 🫨
Далее
skibidi toilet zombie universe 37 ( New Virus)
03:02
Просмотров 1,3 млн
Everything I've learned selling CNC trays
25:29
Просмотров 44 тыс.
Genmitsu 3020 cutting aluminum  injection mold
16:03
10 CNC Mistakes to Avoid for Beginners
21:21
Просмотров 42 тыс.
Things to know when getting a CNC- Genmitsu 4040 pro
25:52
#samsung #retrophone #nostalgia #x100
0:14
Просмотров 14 млн