Today we are going to do a DIY on Toyota Tundra TPMS. It's a simple fix and the inexpensive way of doing it. It only takes 5 to 10 mins at the most. Make sure you Like, Share, and Subscribe to the channel for more content😊.
Thank you so much! I have a 2013 Tundra that the TPMS sight is starting to act up. I will definitely try this fix when that light can no longer be reset. They are great trucks, thanks again.
I had my doubts if this trick works but if it works and it is very fast 5-10 min you only need a flat head scrudriver , wire cutters and some electrical tape 2014 Tundra SR5 Double cab Work perfect 👌
If you changed the tpms sensors then you will have to plug into the computer and tell it you changed them, the relearn button will not work for this function since Toyota uses a direct input system.
Sweet ride, I have the same radio. Do you have a problem with it booting up or coming on? I did the wire mod just like you said to. It worked on my 2013. Thank you so much...
I opened my door,pressed on the brakes repeatedly and fiddled with the switch. Done. Oh I did fiddle with the gas cap first as I had just filled up the tank but that didn't work
The reset button does not “relearn” or register the TPM chip with the truck. You need a hand held device to register the ID numbers. What it does do is set your low tire pressure setting. What that means is that it allows you to set when the warning light goes off. To do this put all your tires at the proper tire pressure then push the reset button. It should then inform you when a tire is 5lbs off from this “ideal” pressure. Just make sure all tires are at the proper pressure before you do this. Or at least this is the rumor.
Yea in some cases that will work but in others some won't relearn even after you replace them with new ones and register the ID bc you might have tried too many times to relearn it.
What year is your truck? Tire sensor batteries are only supposed to last 7-10 years. It could have been a battery going low. Replacing the sensors fixed my issue on my 2010 tacoma.
@@slickwhip_talk thanks; so is the idea to disconnect the wires? The small metal plate that cliques in between the two wires, is that basically cutting the wires connetion but keeping them in place? thanks
I also have a 2007 Crewmax and this did not work for me either, TPMS light is still lit??? I did jumper the exact two wires on the same connector that was done in this video.
