Get the MOST POWER out of your Laser by doing THIS in Lightburn!

Подписаться 20 тыс.

Просмотров 13 тыс.

50% 1

This is the best way to get inexpensive power out of your CNC Machine!
Check out FoxAlien using my Affiliate Link Here:
www.foxalien.com?sca_ref=3491064.Cgy97aKmUB
OR
Buy FoxAlien CNC Masuter Pro on Amazon here:
amzn.to/41XVVAK
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Calipers on Amazon here:
amzn.to/3KWO4NC
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc

Развлечения

Опубликовано:

18 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@SimoneFestuccia 6 месяцев назад

DUDE, I LOVE YOU! It's 3 months i'm engraving with a 20W laser that barely does better than my previous 5W... and you know why? It was working at 3.9W.... Yesterday thanks to you i've unleashed all the 20W and filled the room with smoke...

@TheCrawlspaceCraftsman 6 месяцев назад

That is awesome! It’s such a common error and even I’ve done that with my lasers not realizing!!!! Glad it helped!!!

@mightydtwentycent5921 7 дней назад

@@SimoneFestuccia how did you know it was at 3.9W?

@SimoneFestuccia 2 дня назад

@@mightydtwentycent5921 ehhh it passed too much time and not I do not remember the correct setting I had, but since max power was set on a scale from 1 to 255, instead 1 to 1000, setting output to 80% of already limited outpuit lead up to a 3.9 teorical output. but I didn't use any power meter, they cost too much. What can I say, is that after i followed this instruction, I've been able to cut trough 1.5CM wood.

@granthogarth8318 4 месяца назад

Brilliant! Thank you for solving a problem that I didn't know I had.

@TheCrawlspaceCraftsman 3 месяца назад

LoL. I was in the same boat and figured I share the knowledge!! Thanks for Watching!

@slingerssecretlaboratory 8 месяцев назад

THANK YOU, Thank You, thank you!!!!! I was pulling hair trying to figure out this thing!

@TheCrawlspaceCraftsman 8 месяцев назад

Absolutely!!! Glad it helped out!!!

@KaroKhatchadoorian 2 месяца назад

thank you for this!!!

@TheCrawlspaceCraftsman 2 месяца назад

Absolutely!!! Glad it helped!

@mikepgff 3 месяца назад

Good information, Thank you.

@TheCrawlspaceCraftsman 3 месяца назад

Glad it helped!!!

@user-qs9ml3gy2v 8 месяцев назад

Great! Thank you!

@TheCrawlspaceCraftsman 8 месяцев назад

Your very welcome !!!

@themetalfusionologist 10 месяцев назад

Bruh…you just solved the main issue I’ve been having. Thanks for the vid

@TheCrawlspaceCraftsman 10 месяцев назад

Fantastic!!! I have a feeling ALOT of peeps have this issue going on don’t even realize it! Happened to me too!

@cagtayc 13 дней назад

Thank you❤

@TheCrawlspaceCraftsman 13 дней назад

Awe Your Welcome! Thanks for watching!

@PedroGomes_27 6 месяцев назад

Just here to say that I love you! Thank you so king much

@TheCrawlspaceCraftsman 6 месяцев назад

Awe…. We love you too! 😂🤣😂. Glad I was able to help!

@user-sk5nr4yh8d 2 месяца назад

I have to say that this method does not apply to all diode lasers. I have a Artur 20W laser and it cuts perfectly through 1/4" plywood at an S Value Max of 1000. So I cannot imagine setting it to 10000. But common sense tells me do not mess with good enough. I did like your video as you were informative, thank you.

@TheCrawlspaceCraftsman 2 месяца назад

Totally understand. Sometimes the 1000/1000 works just the same. Just have to make sure the numbers match! Thanks for watching!!!

@markbosworth5898 Месяц назад

My Lightburn Device Settings have no option to change the power.

@TheCrawlspaceCraftsman Месяц назад

🤔. Hmmmm….. what kind of laser do you have? Diode or CO2?

@parthmehta4105 16 дней назад

I’m using Sculpfun S30 Pro Max 20W laser, I tried before and after changing the setting, unfortunately the results were exactly the same! Thank you for the information though 👍🏼

@TheCrawlspaceCraftsman 14 дней назад

That’s odd it didn’t work. Wish I was able to help more! Thanks for working!

@djkrazythug 10 месяцев назад

I have a 5.5watts can I apply this to my ortur and what would be the change right now both at 1000 thank you for your assistance

@TheCrawlspaceCraftsman 10 месяцев назад

So if both your setting match up you should be good. By adding a 0 to both… it won’t do anything “extra”. It doesn’t change the actual power of the laser. It only makes sure your machine is using its full potential which in your case is 5.5w. Hope that helped a little more and thanks for watching!!!

@user-om1zf7dp8g 10 месяцев назад

Dear blogger, hello, I would like to ask about the dust collector produced in China, the motor is 220V, how can it be used in the United States, do I need to connect another line.

@TheCrawlspaceCraftsman 10 месяцев назад

If it’s 220 your definitely going to need to install a 220 outlet with plug to match. I would consult with an electrician before you make any moves.

@Onurcann11 6 месяцев назад

Hi buddy, first of all thank you for the video, it sped up my cutting time which was quite slow but I'm wondering one thing, will this shorten the my laser life? will it break? or is this really the setting that it should have because when I connect my laser to my PC it automatic finds it and when it does it doesn't automatically load these settings to it?

@TheCrawlspaceCraftsman 6 месяцев назад

It will not. You’re not over clocking the power…. Just bringing it to 100% of its optimal power. Thanks for watching!!!

@mightydtwentycent5921 7 дней назад

@@Onurcann11 i think so laser life is reduced

@bayuocta7042 Месяц назад

thansk a lot for the video, it helps a lot. may i ask a out of topic question here ? i have a DIY setup laser engraver ( MKS DLC32 controller + laserTreee 40W AA ) , till now i cant get a perfect circles when i draw them. i dont find any misalign when i draw a square/rectangle. ive done manu calibration settings, but it still the same. any thoughts ? thanks

@roadcrayon1525 Месяц назад

Do you hold down the shift key when you are dragging out your circle?

@TheCrawlspaceCraftsman Месяц назад

Thanks so much! @roadcrayon1525 is 100% correct. If you hold shift…. Then drag your cursor…. It will stay a perfect circle. If you don’t it will be oblong. Worst case make sure you unlock the dimensions and hand type the exact same measurements you need in both Width and Height then Lock it again! Thanks for Watching!!!

@bayuocta7042 Месяц назад

@@roadcrayon1525 i did. I always double check X and Y size. But when i engrave them , i cant get them perfectly circled.

@cheekyoscar1353 8 месяцев назад

absolutely true . The values have to be the same , it doesn't matter what the number is as long as they are the same on both screens .. * when you have got this setting correct then turn the "running laser "setting down if you feel your laser is up too high you do not necessarily need to cut at 100% in a lot of cases. But at least you know you can if you want to . good video 👍👍👍👍

@TheCrawlspaceCraftsman 8 месяцев назад

Thanks so much for watching!!!

@rcjarvis 9 месяцев назад

mine (Omtech k40+) was set at 1000 in both device and machine settings... so that should be ok.... ? Right ? Or do I put it to 10 000... and potetially burn the pow sup...

@TheCrawlspaceCraftsman 9 месяцев назад

1,000/1,000 is fine. If both are the same you’ll be running at true 100% power. 10,000/10,000 is the same too. It’s not telling to pump more power only a % of 100% power.

@rcjarvis 8 месяцев назад

@@TheCrawlspaceCraftsman THANK YOU VERY MUCH !

@StanG1980 9 месяцев назад

Would this be the same for a 40w xtool d1pro 10000

@TheCrawlspaceCraftsman 9 месяцев назад

I would say if your using Lightburn then yes. I know xTool has there own proprietary software too so there I don’t know. Still waiting for xTool to reach out to me for a collaboration! 🤣

@hardshellconstruct 2 месяца назад

Hi I have creality falcon 2 22 watt settings both say 1000 is that it's max or is it cutting full potential cheers

@TheCrawlspaceCraftsman 2 месяца назад

I use the 10000 / 10000 numbers. Try that and see if it makes a difference.

@hardshellconstruct 2 месяца назад

Thanks I try hope it OK for me lazer

@MarkFaile 5 месяцев назад

I do not have these settings in my lightburn. Any Idea why? 60w omtech.

@TheCrawlspaceCraftsman 5 месяцев назад

I’m not sure. That’s a CO2 laser so maybe that has something to do with settings. I’m not familiar yet with CO2.

@parthmehta4105 16 дней назад

Because your laser machine is off or not connected to your laptop! Turn it on bro! lol I had the same problem!!

@hunterjohnson4591 Месяц назад

Does this work on diode lasers?

@TheCrawlspaceCraftsman Месяц назад

Absolutely !!!

@panellmann1461 3 месяца назад

Well now I feel stupid, I got a 24W laser as my first machine and I thought it was a bit weird that even on 100% power and 300 mm/min speed it barely cut through 4mm hardwood plywood, while other people in videos easily cut through 15 mm hardwood or even more with their 20 watts :D Thank you so much for this :)

@TheCrawlspaceCraftsman 3 месяца назад

Don’t feel stupid! We’ve all been there…. Me too! Just glad it helped out!

@GSandra30 2 месяца назад

I thought the exact same thing. I have a 24w as well and was having the same problem.

@mightydtwentycent5921 7 дней назад

@@panellmann1461 and now how many pass to cut your hardwood 6mm?

@sareythun69 5 месяцев назад

Dear what’s model of your lasers?

@TheCrawlspaceCraftsman 5 месяцев назад

Foxalien, a tool, Atomstack

@sareythun69 5 месяцев назад

Dear I’m not experien for laser. How much power and optical for your laser? Now I’m use 60W and optical 10w can not cutting wood 10mm .

@manitoulinmakers849 10 месяцев назад

only thing about using 100 percent power is it takes life from your laser.

@TheCrawlspaceCraftsman 10 месяцев назад

100% correct. I didn’t mention that in the video but I used it for the teaching purposes of the video. Much easier to get across the point with 100% rather than 87.5%. 😂. Thanks for watching!

@mickeeFPV 6 месяцев назад

So does running it for several hours to make the same cuts that would take 20 mino. I have a Laser Tree K 30 and would like to get at least 50-70% of its capable power output and cut materials in a reasonable amount of time. I spent all night trying to cut letters out for a sign and it wasn't pretty. Not to mention all the extra carbon I had to sand off the first layers and re cut ones that broke while doing so. I'm not an angry person but if I hadn't came across this information. I might have ended up on a primetime news segment about people who feel unhinged rage around technology