Getting Into Resin 3D Printing - The Ultimate SLA Beginners Guide

Подписаться 67 тыс.

Просмотров 983 тыс.

50% 1

In this video I go over everything you need to know to get started in resin 3d printing. I cover the technology, picking out a printer, picking our resin, safety, slicing, printing, and cleaning.
Thanks to all my subscribers for your support. Commenting on the videos is one of the best things you can do to help grow my channel. So thanks again for all your support.
This video does show products and affiliate links are below. That means I get a small comission if you buy using one of those links. But these tiny comissions do help keep this channel going. So please use them and share them. Thanks!
This video was sponsored by Nova3D and they provided the Elphin 2 printer shown in this video.
The printer is here: amzn.to/2PRfj1E
HOWEVER that printer doesn't seem to be available any longer. I'd look at this one instead: amzn.to/309s7pJ
This video is also sponsored by Yousu, and they provided the resin.
You can buy the resin here: amzn.to/2PQspfz
Other affiliate links to get all the stuff you see in the video. Using these links helps support my channel. So it really helps me if you use these links when sharing these items also.
This is that amazing deal on the plastic sheeting. Notice that all the other roll sizes are more like $20-$30. But this one is only $5: amzn.to/3dxTT1M
Plastic Food Trays - 12 count of 12x16: amzn.to/2OnNMVe
(There are some 10x14 ones that are cheaper. But the bigger ones are better for 3d printing)
The rubber mats as seen in the resin handling video- amzn.to/3pmhfws
(I normally use both and put the rubber mats on the food trays)
Metal Funnels - amzn.to/39ZU56y
IPA - amzn.to/2T0uFzS
Spray Bottles - amzn.to/2T2q7t2
Nitrile Gloves - amzn.to/2Tm6T0c
My Mask - amzn.to/3cgvWL5
UV Lamp - amzn.to/3fMfDts
And this is the other resin I use, Siraya Tech: amzn.to/3kln4qe
Here is my favorite Atari Hat: amzn.to/3mhoW5Z
Here is the hat I'm wearing in this video: amzn.to/3fLdHkT
These are not the exact ones from the video but look pretty good:
Metal Scraper: amzn.to/3fIenYq
Safety Glasses: amzn.to/39HbZ08
I also want to thank Formlabs for being gracious and allowing me to use some of their footage for this video. For more information about Formlabs printers go here: formlabs.com/3d-printers/form-3/

Хобби

Опубликовано:

3 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 879

@Nerdtronic 3 года назад

Hi. Thanks for all the views and wonderful comments. I wanted to address the UV Lamp and the fact that I wasn't wearing gloves while post curing. You can't see it in the shot, but I was wearing my UV Protective eyewear. The ones shown earlier in the video. You should not look at artificial 405nm UV Light without protective eyewear. It can damage your eyes. Sorry that I didn't mention this in the video. As far as UV Light and skin. I've had several comments that I shouldn't be exposing my skin to the UV light either. Including a comment from a close friend. As you can tell, I am very pale and am sensitive to sunlight. However the UV lamp in the video is similar to that used in a nail salon. It is narrow band 405nm. Research has shown that exposure to this type of artificial UV light does not increase the risk of skin cancer. See link below. It's safer than the same amount of exposure to direct sunlight. Therefore I haven't worried much about it. I could have just as easily taken the part outside and sun cured it for a few minutes. I prefer to post cure more slowly and instead use the UV lamp, which is less powerful than the sun. Still, better to be safe than sorry. Therefore I do recommend that you wear gloves and avoid prolonged skin exposure to the UV light. www.probeauty.org/docs/nmc/news-UV-Nail-Lamps-Little-Risk-Skin-Cancer_2012-12-09.pdf

@kingtigertank72 3 года назад

Question...Have you tried reusing the printed leftover resin, i mean, melting it to make it liquid form again, to be reused, thus, cutting cost, have you tried it and has it worked ?

@Desca2001 3 года назад

@@kingtigertank72 That is not how Resin works, you cannot remelt it like you can with FDM prints using thermoplastics (like PLA), because it not a melted polymer in the first place. Resin is made from Monomers and a UV-active component. When it gets in contact with UV-Light, a Polymerization reaction starts, creating long chains (polymers) out of a lot of the monomers. This process is no reversable by heat. But usually the amount of resin you "waste" (for support structures and maybe failed prints) is quite low, and all of the still liquid resin in the vat is perfectly usable. If you want more detailed information, check out the video "Ph.D. Chemist Explains 3D Printer Resin"

@kingtigertank72 3 года назад

@@Desca2001 this is exactly what i needed to know, very helpful and, insightful. Thank you

@valeforedark 3 года назад

Looks a bit illegal printing games workshop ip

@valeforedark 3 года назад

@@kingtigertank72 I've seen people make new filament from old and it's a little weaker each time(I think the bonds get really broken)

@commandrogyne 2 года назад

Someone else has probably pointed this out but you need a mask or a well ventilated area basically all the time when working with uncursed resin, prolonged exposure to resin fumes can lead to some nasty health complications down the line. Get a respirator rated for hazardous material and wear it religiously, your lungs will thank you later! Resin isnt incredibly dangerous, but the safety protocols involved are super important, just like they are with most tools of this nature.

@Rocky-po2wy Месяц назад

Thankyou for ur info mate :)

@RobertTolone 3 года назад

Your video production quality is insane Michael! Congrats on reaching 10K subs, you’ll soon have ten times that.

@Nerdtronic 3 года назад

Thanks Robert. I keep watching your videos every week also.

@macinfloydvolk Год назад

He lays a video editor, most RU-vidrs do now

@Dulioatm 11 месяцев назад

Seriously when I saw the 3d layer lines demonstration I was pretty impressed I appreciate the high quality videos

@stephanaeon 9 месяцев назад

He's got 60k now!

@sonderklasse9680 2 года назад

Great video. After 6 years of FDM printing, I’m finally delving into Resin printing. You seem to be a natural at instructional video and you’re pleasant to listen to. Finally - a RU-vidr that isn’t trying to be a celebrity! I’m glad I found your channel. Thank you.

@rocus80m Год назад

New to all this stuff, but why is resin better than the other stuff? Just curious

@wabbysworld Год назад

@@rocus80m Hi! Im new too but ive noticed that resin prints look better and smoother.

@352tommy Год назад

@@rocus80m its much easier to get a lot of details into a resin print than compared to FDM! Either way, both often require lots of testing and trying until it works out perfectly for you!

@michellesgarden5695 Год назад

I just discovered this channel as am looking for my first printer...very good video indeed

@DanielKrafft 2 года назад

This is really well made.. thank you!!

@nova_7979 2 года назад

Looking into resin as well?

@holvingar4375 Год назад

DANIEL KRAFFT

@holvingar4375 Год назад

I LOVE YOU

@Bean891 6 месяцев назад

No way

@Bean891 6 месяцев назад

This guy is cool

@IceDragon67 3 года назад

Congrats with 10K! You deserve a lot more however. The quality of information and the way you bring it are just flawless. This video is just another example. Good to hear about the sponsorship too. Best wishes to you!

@enelgaragedemartincho 2 года назад

Pretty good and informative video. Thx for sharing and I’m a new subscriber

@etboyette 3 года назад

Wow, I'm looking at getting into 3d printing and this video was absolutely perfect! Clearly and concisely went over everything necessary to get started, with links to more in depth topics. I don't normally subscribe after watching one video (especially about more niche topics) but you earned one from me, keep it up!

@PilotPhotog 3 года назад

Thank you Michael for putting this video together! I am looking at getting a 3D printer and this is a huge help, subscribed!

@alexhb12333 Год назад

Crazy you've gone from 10k to 40k in a year! You deserve the attention, you are doing an excellent job capturing and teaching this information.

@janinelew2483 3 года назад

This is the best video I've seen so far. I was skeptical about getting a resin printer because I was under the impression that if one drop of resin got on your skin, you would drop dead instantly! 👻 The stove reference, which I use several times a day, changed my mind.😁 I started thinking about other things I use that can be dangerous, like my table saw, my car, etc. I think I'll give resin printing a try after all.

@chrisnunez4758 2 года назад

Don't be fooled. Getting resin carelessly on you can cause you to have incredibly intense allergic reactions. Check reddit for those that have failed to follow proper safety precautions with pictures of visible skin damage. Over time, even a microscopic drop of resin can still cause those reactions. Resin is not to be messed with.

@Rastamahatma 2 года назад

@@chrisnunez4758 is this true of the newer "cleaner" resins as well?

@msessenceofreality 2 года назад

👏🏽👏🏽👏🏽I'd love to see your creations!!

@jeffholt9437 2 года назад

You think they were Covid deaths..........

@PunakiviAddikti 2 года назад

It's not too bad. Just don't let it on your skin if possible and ventilate well. *Test your skin for allergic reaction!* Always wash your skin well if you get some resin on it.

@nickh5872 3 года назад

Finally someone who’s honest about their sponsors. You said the yousu is decent stuff, Some people would say that it’s the most cheap and the best resin on the market so the sponsor would come back.

@jkorman2278 2 года назад

This is by far and away the best 3D printer guide ever. Much love!!

@robbie.205 2 года назад

Wow, that was the best getting started in resin printing video I have watched. You present the how to in a much easier way than most other videos, very easy to understand the process. Looking forward to getting a printer soon. Again, great video, thank you for sharing. A new subscriber.

@techsavvyhero 3 года назад

Tons of great info in this video. Wish I had seen before buying my Phrozen Sonic Mighty, but still glad it exists now. Thanks for sharing!

@JasonGlisson Год назад

I am speechless with how well this video is planned and executed. I'm a maker and have been doing 3d printing for a while. Just about to pul the trigger on a couple of resin printers and this was definitely the best video I've seen on resin printing tips and overviews. Excellent work here.

@JonathanB822 2 года назад

I watched this video several months ago and I find myself watching it again before I make a purchasing decision. This is such an informative and professional video. You really did a great job!

@MastaRhee 3 года назад

Very comprehensive guide to resin 3d printing. Thank you for making a video like this.

@snap4ward 3 года назад

Clear and concise! Nice change vs other channels. You can tell you spent some time producing this and it was worth the effort.

@Nerdtronic 3 года назад

Thanks!

@johnhersom6002 2 года назад

Hands down the best comprehensive detailed summary of SLA printer with so the info a person needs. Also a very well put together video production. I enjoyed watching and listening. I appreciate the time it takes to produce high quality videos and the time put in to make it so good. Thanks again, you gained a fan.

@L3X-369 2 года назад

One minute and 46 seconds in this video and you already got me hooked! Your animations are awesome! I'm into 3d printing for 4 years now, and I never seen such a good explanation of how 3 3d printing works! You should start with "welcome to my ted talk" :D

@PeterSFam 2 года назад

An additional useful item to use is puppy training pads (aka wee wee pads) they are an absorbant layer on top of a plastic backing. Its great for managing spills. Put them underneath where your working or printer. If there is any spill just pick up the whole thing and toss. So much easier than trying to wipe things up with paper towels.

@enochroot9438 2 года назад

great tip, thanks

@hhattingh 3 года назад

You've just reached 10k and in only 2 months later you are at 15,600! Halfway through and I feel as if ive struck gold. Sir clearly you are doing something right. Subbed

@zeph_os Год назад

Very informative video! I've been doing FDM printing for 4 years or so and while I still believe it's my current best choice for my own purposes, I will always adore the sheer amount of detail that's possible with SLA printing. Glad to see it's starting to enter an area where it's becoming affordable for most people who want to get into it

@abhishekbhandari8111 3 года назад

you are a boon to the community. such good details, great quality and flow. Awesome video

@Boba-Zach 2 года назад

This is one of the best 3d printing videos I've watched, thank you for the awesome graphics explaining how things work. 10/10 would recommend to a friend.

@azztopia 2 года назад

This channel is way too underrated for the quality, the camera angles, animation and script are amazing!

@Nerdtronic 2 года назад

Wow thanks!

@naraku33 3 года назад

Very informative without too much fluff, very too the point for everything with lots of good experienced suggestions. Loved it.

@donaldkhogan 3 года назад

Dude why are you making the best 3d printing videos rt now?? Great work and thank you!

@Nerdtronic 3 года назад

Wow, thanks!

@stewmass3018 2 года назад

Wow! This was a fantastic video. I've been looking to get into 3D printing, and have been waiting for the resin printers to come down in price, as I wasn't interested in getting into PLA printing. Very informative, and having an entire section on how to prepare your workspace, and what items you'll want to get....you realize how much trial and error you just saved me? Too good to me!

@thamghoul5719 3 года назад

I've had a FDM printer several years and want to try resin. This was the perfect video for explaining how to get started.

@billybelmonte 3 года назад

Most informative 3D printing video I’ve ever seen. Thank you for this.

@Nerdtronic 3 года назад

Wow thanks!

@marsupialsofmars3886 3 года назад

Thank you so much! My first printer is showing up tommorrow and this was the perfect last video to put all my research in order and clear everything up!

@charlietong8948 2 года назад

hi Marsupials, our factory design, make and sell sla 3d printer, if u hv any problem on sla 3d printer, kindly pls let me know.thx. charlie

@3DJapan 3 года назад

Good video. I have 4 resin printers and have been resin printing for about a year. I believe you've covered everything, I have nothing to add.

@MrHardSick 3 года назад

Hi, hope u can help me, i'm ready to Buy My first 3d resin printer, in My country we doesnt have too much variety, and the only "well knowed" 3d printers are 1.- Anycubic photon mono x and the 2.- Creality LD006... And i don't know wich one Buy... Please help me!! Btw, sorry about My Bad English, it's not My native. Thanks!!

@jhonb6768 2 года назад

What a great video. Very well done. Very informative. One of the best RU-vid how to video's I have seen.

@FeatsDaily 2 года назад

Really great explanations all around. As a total novice, this video makes getting into resin printing way less daunting

@cc_chapman 3 года назад

Thank you for the fantastic video. The most simple and straightforward explanation of 3D printing I've seen in a video. I'm going to use it in my future classes. But, for me personally, I wanted to thank you because as someone who is thinking about adding my first resin printer to the mix I had some questions and you answered them all. So glad you mentioned UV light and windows as that changes everything I was thinking about as far as placement.

@hardrightx 2 года назад

Awesome video Michael. Learned a lot. Keep going man!

@Kaskets3D Год назад

Man I'm so excited, this is exactly the type of video I was hoping to find!!! Thank you so much!!

@SeabornNomad 2 года назад

Another 10k subs in 4mo! Nice progress!! Such a great explanation of 3d printing.

@TheCrippledCrafter 2 года назад

A huge huge thankyou for this video! So helpful and easy to understand for this noob 😉 . You have a new subscriber for sure!

@cristiangarcia3068 2 года назад

This is by far one of the best most informative videos I've seen in a while. Just perfect! Thank you! Subscribed!

@Nerdtronic 2 года назад

Wow thanks!

@enjakerator 2 года назад

As I’ve been getting into resin printing i have watched a lot of “getting started” videos. This one is hands down the best. Good information. Methodical explanation of process. And a really professional presentation. And I’ll be checking out the rest of the content on this channel. Thank you!

@Nerdtronic 2 года назад

thanks!

@nccyr1 3 года назад

This is a fantastic beginner video. Thank you for taking the time to make it perfect!

@Nerdtronic 3 года назад

Wow thanks. You're welcome.

@iceclimber2001 3 года назад

I agree. After spending a year teaching remotely, and having to create instructional videos, I can appreciate the effort of creating and editing this content. It wouldn’t surprise me one bit if you are a teacher, as your presentation and organization of the material is excellent.

@GameKnightMaine 2 года назад

Thanks for this video. Very informative, to the point, and a great intro to the basics. Exactly what I was looking for.

@SoraluverEternity 2 года назад

Best 3D printing video I've seen! Thanks!

@DavenaOaks 3 года назад

Fantastic video, thanks for sharing this! I like all your videos, they're so informative and straightforward.

@Nerdtronic 3 года назад

Glad you like them! Thanks for watching

@daleprather3026 2 года назад

Extremely well done video and really helpful for someone wanting to get into this hobby. Thanks!!

@JasonCeasar Год назад

This is one of the most helpful videos I’ve ever watched! Thank you and keep up the great work!

@wirasyahid5992 3 года назад

This is so easy to understand .. thanks boss !

@bohwachu1111 2 года назад

I love your videos and your voice tone, explaining animation, EVERYTHING!

@favilar88 Год назад

This video is great!! The best ones that I have watched in a long time. Thanks for the tutorial 😀

@falconNL 3 года назад

I would love to see a review on a cheap set up like the Creality + curing station. Your channel is amazing, keep up the Amazing work!

@nscalemodeltrainsnstuff741 2 года назад

Hey man....thanks so much for this informative video....it is very well done and it answered so many of my questions.

@NerdBrainDk 5 месяцев назад

Thank you soo much for this guide... This was exactly what I was looking for. Gonna link this in my next video. 👍👍👍

@ashlishockley7608 2 года назад

I’m throughly impressed with this video. Thank you!

@quietblueninja6244 6 месяцев назад

Even though this video is 2 years old it holds up, I’m just thinking about filament vs resin and I think this had convinced me that resin isn’t as difficult as I thought and probably the way to go for me!

@timdefreitas1470 3 года назад

One video that gave me all the info I needed. Great job.

@joshk528 7 месяцев назад

There’s nothing better then finding the exact video you’re looking for on the first try. Great content!

@Phildo8 2 года назад

Thank you for such an amazing video and actually explaining the information in words that a beginner like myself who have never owned any 3D printer spool or resin. I’ve been making mini figures for years now that folks use for EDC as lucky talismans or display pieces but I’ve always done it the old time consuming way by sculpting the piece from clay, making a silicone mold & finally casting a resin final product! I’ve deff gotta get me a resin 3D printer! It’ll shorten my waiting list making me able to keep my books open instead of having to open & close them repeatedly for orders.

@charlietong8948 2 года назад

hi Phildo , did u get your SLA 3D printer or not ? our factory design, produce and sell SLA 3D printer with nicer price and good quality

@brandonelliott6241 3 года назад

Very informative and helpful. Thinking about getting into this type of printing and your video helped tremendously. Thanks for the upload!

@ForkandSpork95 Год назад

Thank you for being so informative and easy to understand, my saturn s is on its way and I am absolutely stoked to get started!

@nicu37 2 года назад

Great video on Resin printing! I've been using standard filament printers for the last 5 years and just bought a resin printer this week. Very different experience than I am used too. Just subscribed and I am looking forward to watching all your videos!

@Nerdtronic 2 года назад

Cool thanks. Have fun!

@joaodealmeida5296 Год назад

Insane quality video, Michael! Really amazing

@soyguikai 2 года назад

Amazing video edition and animation to explain everything with detail.

@williamsteendam3464 2 года назад

one of the best how to vids ive seen,, so i subbed :)

@OddThings 7 месяцев назад

I just purchased a Mono 2 today, I cannot wait. So I've been binge watching 3d videos. I really enjoyed this, informative and gave me somethings to think about. Thank you :)

@rowenarrow Год назад

Great breakdown of the breakdown of 3D printing. This was needed.

@Nerdtronic Год назад

Thanks!

@Okihenlo 3 года назад

Wonderful production quality and amazing video!! This helped me with my new printer!

@Nerdtronic 3 года назад

Thanks! Glad to help.

@faizkamel4444 3 года назад

The quality of your videos is incredible. Keep it up!!!

@Nerdtronic 3 года назад

Thanks a ton! Hope to.

@mikemartin3671 2 года назад

Really informative, I appreciate your presentation method and style. Thank you, first time viewer and new subscriber!

@Nerdtronic 2 года назад

Thanks!

@theholygrass19 2 года назад

Thank you for making this video, very informative for a total beginner like me!

@charlietong8948 2 года назад

hi Holy Grass , any plan to buy a new resin printer ?

@ronsflightsimlab9512 Год назад

GREAT video! I really appreciate the effort, and I learned a ton!

@johnnyv9024 3 года назад

This video is incredible, thanks!

@jamesc.7988 Год назад

I have an Elegoo Saturn 2 sitting on my dining room table at this moment, still sealed in its original box. I have been using an Ender 3 FDM printer for years and love it but decided to take the leap to resin with the Saturn 2. As one might expect, I have been watching a number of 3d resin printer videos and have found this video to be the best by far. I really like your straightforward, honest and direct approach to explaining the finer details of resin printing and the fact that you do so without relying on that overly-hyped and forced "toxic positivity" that makes me cringe and immediately shut the videos off just makes for a perfect presentation. Thank you for not being a schlock jock and actually offering useful information. I do have a question that I had not previously considered. As someone who wants to conserve resin, should I consider getting a smaller printer for smaller prints and save the Saturn 2 for larger projects? Amazon has the Mars 3 Pro for $299 now, is that a good price?

@StickyPTFE 2 года назад

Excellent quality video. Concise and informative. Good clear graphics and many topics covered. Subscribed.

@Nerdtronic 2 года назад

Thanks! Welcome aboard!

@Teknodromen84 2 года назад

THANK YOU! Finally a guide I understand!

@Steven_Rowe 4 месяца назад

I really liked this video, and typically American it doesn't assume you know anything so I found it really good. I knew NOTHING about 3d printing, didn't even know what sla and fdm is so now I do. Thanks

@garethburke8806 2 года назад

Excellent video and very informative..... Looking to start printing and this helped a lot.

@jeans.plescha1480 Год назад

Still Relevant Video, thank you, I just started with MSLA printing and this was very helpful!

@daveb7712 3 месяца назад

Great video. Answered everything I wanted to know about resin printing.

@morisumaru3728 2 года назад

Very good and informative video man Just awsome

@4xyxs 2 года назад

Your visuals are so good man. Keep it up!

@Ayranit 3 года назад

thank you for so detailed description of the process! gold mine for beginners :)

@Nerdtronic 3 года назад

Glad it was helpful!

@twylightphoenix Год назад

thank you so much for this video! when i bought my printer, i didn't even know it was a resin printer. I had always used the FDM printer my dad had. this makes so much of the basic prosses clear and ill be buying the extra necessary parts now. Thanks!

@Nerdtronic Год назад

Thanks for watching!

@Kerazzy. Год назад

Thank you so much. Your information really helped me make my decision.

@TheXzaclee16 2 года назад

This video is so helpful and educational!!! thank you so much!!!

@randyjones4975 3 года назад

Watched and subscribed. You explained everything easily for a noob like me. Thank you.

@markusv311 2 года назад

Very nice intro on gettin into 3d resin printing. Many thanks

@allpro_photo 2 года назад

Wow awesome video! I can’t wait to see more.

@luciferschoice 2 года назад

Thank you very much for your video! I just bought my first Resin Printer and it's good to know what else I need!! :D

@jakea75 Год назад

This is the best explanation of 3d printing on the internet. Thank you so much. Subscribed

@themodonyoutube Год назад

This has been the best introduction video I've seen Thanks

@nightshadedesign Год назад

This is great. You are an exceptional educator.

@JM3DICI 2 года назад

This video is amazing and so informative. I'm coming from FDM printing and this video helped me understand so much about the differences. Well done!

@Nerdtronic 2 года назад

Wow thanks! Glad it was helpful.

@Sebastianimator 3 года назад

Fantastic newbies guide! Basically completely sold me on getting a resin printer for all the little projects that I have in mind. If I lived in USA, I'd even use your affiliate links. Thanks!

@sjtinkpum 2 года назад

Now this is how a beginner guide should be. Excellent job

@kevingillard3583 3 года назад

Def needing a channel like this. Thanks for your hard work. Videos are great

@Nerdtronic 3 года назад

Wow thanks. More to come

@maxkoczurek1072 3 года назад

I love this guy. I am a newbie and now i think i know how how to print the right way.

@noamtsvi 2 года назад

I am so impressed with the visualizations and edits! this video is on such a high level. Also extremely informative. Thank you for such an amazing video. Subscribing now!

@Nerdtronic 2 года назад

Wow thanks!