Getting started with Neural Amp Modeler (NAM) and Reaper!

Подписаться 1,2 тыс.

Просмотров 14 тыс.

50% 1

In this video, I will show you how to get started with Neural Amp Modeler (NAM) and Reaper. I will go through downloading both applications, initial set up in reaper, setting up a project, adding a gate, reverb and delay. At the end I will show you how to run both delay and reverb in parallel for more clarity and control.
Download NAM:
www.neuralampmodeler.com/
Download Reaper:
www.reaper.fm/
Download my packs for NAM at Tonehunt:
tonehunt.org/obi-Juan
If you find this video useful, please like it and subscribe to my channel for more!
I do this because I enjoy it and found a good group in the NAM community, but if you insist on donating then: PayPal.Me/theobijuan 😀
0:00 Intro
0:16 Downloading NAM and Reaper
1:50 Reaper setup
5:20 Creating a track and load NAM
7:33 Adding a noise gate
10:13 Adding reverb
11:26 Adding delay
12:48 Reverb and delay in parallel
15:13 Outro
#NAM #neuralampmodeler #reaper #ampsim #tonex #NAM #neuralampmodeler #tonex #metal #ampsim #evhgear #ggd #evh5150 #guitar #guitarist #guitarplayer #neuralampmodeler #metallica #mesaboogie #fyp #riff #subscribe

Видеоклипы

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@TiagoVargasweb 6 месяцев назад

Awesome! Great tone in a simple explanation. Thanks for sharing!

@Obi-Juan_Guitar 6 месяцев назад

Glad it was helpful 🙏

@tommyjams7403 10 месяцев назад

Yea good video man. I needed that!

@danielkevin9994 11 месяцев назад

Thank you very much ! This video was just what I was looking for. It helped me on how I should properly use delay and reverb together. Thanks brother!😄

@Obi-Juan_Guitar 11 месяцев назад

I’m glad it was helpful 😃

@danielkevin9994 11 месяцев назад

@@Obi-Juan_Guitar 😄

@brianmac8260 8 месяцев назад

Insert ReaDelay, adjust the Length(musical) to 0.5. Adjust the feedback to suit. Look at the bottom, hit Add Tap. It creates another Tab with the same settings. Go to the second Tab, adjust the Length(musical) to 1.0. Looking down again you will see a Pan slider. Drag one Tab to the left and the other to the right. You can also adjust the volume of the delay. Play with Lengths to suit.

@kellypeterson2625 Год назад

Great instructions. Thank you!

@Obi-Juan_Guitar Год назад

You are so welcome!

@aki6377 2 месяца назад

exactly the video iwas looking for thank you

@Rumklang_dk 10 месяцев назад

Very useful video, thank you!

@Obi-Juan_Guitar 10 месяцев назад

I’m glad that it was useful 😃

@CoopMusic247 7 месяцев назад

that's pretty dope. Thanks

@Obi-Juan_Guitar 7 месяцев назад

You're very welcome. Glad it was helpful 🤘

@philjames1019 5 месяцев назад

Great instruction ... thanks mister!!

@Obi-Juan_Guitar 5 месяцев назад

Glad it helped 🤘

@eduardolay5793 2 месяца назад

Desde Montevideo Uruguay me resultó muy útil tu vídeo. Especialmente el uso del noise gate de Reaper. Ya lo incorpore a mi set. Muchas gracias

@Obi-Juan_Guitar 2 месяца назад

Que bueno que te ayudo. 🤘 Saludos a Uruguay

@romanoleksyn1953 7 месяцев назад

finaly, someone show me how it works together in real example

@Obi-Juan_Guitar 7 месяцев назад

Very glad it was helpful 🤘

@blueeyephil 6 месяцев назад

Great video for me. I have been using Reaper but very basic. I have never done the sends into other tracks like you showed, so I'll try that. I've played around with NAM just a bit but will focus on it more. Maybe a help to someone else, I was having issues with sound cutting out and discoverd I had background processes running my CPU usage up to 90% +. They are anti virus and auto backup.So Ill have to suspend them when running Reaper.

@micbaron 5 месяцев назад

Thank you for this man, just what I needed! I just started using NAM, and followed what you did in the video. Just a question, why is using an fx track better than having the delay/reverb on one track? Cheers!

@Obi-Juan_Guitar 5 месяцев назад

Glad it was helpful 🤘 By separating delay and reverb you avoid the delay repeats feeding into the reverb which can cause a muddy more washed out sound.. By separating you get more control and also a clearer sound. You can definitely put them in series, like you would on a real pedal board, but in the DAW you have this flexibility. Give both a try so you can hear it yourself. It's a good test 🤘

@Andersrain Год назад

Nice vid!, What pickup are you using?

@Obi-Juan_Guitar Год назад

Thank you! I used my Evh Wolfgang guitar with the stock Wolfgang pickups. This one is the bridge pickup. Love these pickups

@rko2016 7 месяцев назад

if i wanna add even more effects like most standard pedal types, is it a good idea to send a separate copy like you do to the reverb and delay to say, a fuzz ampsim pedal? and do so for the entire chain

@Obi-Juan_Guitar 7 месяцев назад

Good question. I usually do sends like in this video for time based effects like delay and reverb after the amp. Overdrive, fuzz and things I would put before an amp, I just add them in the same track before the amp plugin.

@rko2016 7 месяцев назад

alright, nice. thanks man. that's pretty easy to set up then. @@Obi-Juan_Guitar

@XCenturionX Месяц назад

Sometimes all you need is one IR with a good sounding amp capture

@Obi-Juan_Guitar Месяц назад

💯 the IR plays a big factor 👊🤘

@leftofpunk 8 месяцев назад

When I setup reverb and delay in parallel, I lost delay somehow. Reverb is still working but no matter what I change in the delay controls, it doesn't alter the sound. It's as if it's turned off. Any ideas? It was working when it was in one track.

@Obi-Juan_Guitar 8 месяцев назад

I would start by checking that the send from the guitar track to the delay fx track is there. Maybe the send is disabled? Delete the send recreate just in case. Also, make sure that the delay plugin has the mix control to 100% when in parallel. Let me know if this helps

@tristantirone8912 7 месяцев назад

Does NAM come with any tones? Or do I need to download one to actually use it

@Obi-Juan_Guitar 7 месяцев назад

It comes without tones. You can download them from tonehunt.org. This link will take you straight to the tones that I've captured: tonehunt.org/obi-Juan

@BrewerShettles 5 месяцев назад

Great Video!!! - Just checking - NAM - Model = amp and IR = cab

@Obi-Juan_Guitar 5 месяцев назад

Correct! But you can also have a NAM file that's full rig which includes the cabinet. So you wouldn't need an IR with those. Pay attention to the model you download to see if it's Full Rig vs Amp DI. Hope this helps 🤘

@Obi-Juan_Guitar 5 месяцев назад

@@BrewerShettles best place to check is Tonehunt.org. That's where most NAM creators post their models for free 😀

@BrewerShettles 5 месяцев назад

@@Obi-Juan_Guitar Found your ObiJuan's Marshall JCM 900 - 90s Alternative_Pop-Punk Tone- FULL RIG!!! Great sounds!!! Thank you!!!

@Obi-Juan_Guitar 5 месяцев назад

@@BrewerShettles very awesome 🤘 I like how that one turned out 😀

@BrewerShettles 5 месяцев назад

@@Obi-Juan_Guitar - Question Nam Model = OB1 JCM 900 Pop Punk Demo Full Rig and IR is blank. Zip Folder says ObiJuan's Marshall JCM 900 - 90s Alternative_Pop-Punk Tone- FULL RIG - is this right?

@kirillstolerov6899 2 месяца назад

very pretty set, what are the names of these packs on site? both of head and impulse

@Obi-Juan_Guitar 2 месяца назад

In this tutorial I used York Audio 2x12 Mesa Cab Impulses with the NAM pack from this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YAB84ZiNILE.html 🤘

@kirillstolerov6899 2 месяца назад

@@Obi-Juan_Guitar thnx

@deepanjanmallick6215 Год назад

Can I use NAM without a cab sim response? Will the sound not be a little too cranky?

@Obi-Juan_Guitar Год назад

You can definitely use it without a cab impulse response, but you will get the full spectrum of the amp. A lot of high end nasty stuff. To combat that, you can use an EQ after NAM to filter some of it with a low pass filter and shape to the sound you like. In my opinion, I say this is more experimental, but many prefer to do it this way as an alternative to impulse responses with great results.

@deepanjanmallick6215 Год назад

@@Obi-Juan_Guitar your video and way of explaining both are absolutely fantastic! Thanks! Let me give it a try

@Obi-Juan_Guitar Год назад

@@deepanjanmallick6215 I appreciate you saying this. Good luck!

@coolmacatrain9434 Месяц назад

2:34 When I change "Audio System" to ASIO I then don't get any options under "ASIO Driver" other than ASIO4all v2 .. I cannot choose my Focusrite as it doesn't show up in the list? Any ideas?

@Obi-Juan_Guitar Месяц назад

Make sure you install the latest Focusrite drivers for them to show up under ASIO. Which Focusrite interface do you have?

@coolmacatrain9434 Месяц назад

@@Obi-Juan_Guitar The Scarlett solo .. I just tried another daw and it to only shows ASIO4all" .. maybe I should delete asio4all?

@Obi-Juan_Guitar Месяц назад

Did you install the Scarlett solo drivers from Focusrite?

@coolmacatrain9434 Месяц назад

@@Obi-Juan_Guitar Yes

@matthiasdoffek3282 Месяц назад

Where can I find the Amps and IRs to download?

@Obi-Juan_Guitar Месяц назад

ToneHunt.org 👊🤘

@NickTasy 6 месяцев назад

Ok you lost me with the Model and the IR. Idk what those are and where to save them to?

@Obi-Juan_Guitar 6 месяцев назад

I should have included more info on how to get those. The NAM files, which are the captures, can be downloaded from tonehunt.org for free. If you download a full rig capture (amp+cab) you don't need an IR and just load the NAM file on first slot. If you download just Amp DI captures, then you would need an IR (cabinet) on the 2nd slot or use a cab sim after NAM plugin. Tonehunt.org also host several IR to download for free. Go there, download a few and experiment 🤘

@RobboElRobbo 7 месяцев назад

where do you get the wav file?

@Obi-Juan_Guitar 7 месяцев назад

You can download the packs from tonehunt.org. This link will take you straight to the tones that I've captured: tonehunt.org/obi-Juan

@RobboElRobbo 7 месяцев назад

@@Obi-Juan_Guitarappreciate it!

@Gameup2332 10 месяцев назад

why is audio only coming out of 1 earphone

@Obi-Juan_Guitar 10 месяцев назад

👋 in this video or in your Reaper?

@Gameup2332 10 месяцев назад

@@Obi-Juan_Guitar reaper I play my guitar and audio comes out 1 earphone I have stereo selected

@Obi-Juan_Guitar 10 месяцев назад

@Gameup2332 make sure it’s a Mono track

@Gameup2332 10 месяцев назад

@@Obi-Juan_Guitar how do I check that

@alltheserobotsshallfall 8 месяцев назад

you did'nt show exactly what I needed to see: where to get the models, how to install them. :|

@Obi-Juan_Guitar 8 месяцев назад

Thank you for the input 🙏 I should have included that. You can get the models from Tonehunt.org. once you download and have the .nam file, you would look for that file inside the plugin just like I show in the video. Hope this helps. 😀