Getting Started With Paint Spraying - New Air Compressor & Spray Gun

Подписаться 263 тыс.

Просмотров 302 тыс.

50% 1

In this video I get started with spraying paint (although in future I'll mostly be using my new set up for spraying varnishes / clear coats).
My Choosing An Air Compressor Video: • Which Air Compressor? ...
0:00 Intro
0:15 New Air Compressor
3:05 New Spray Gun
4:23 Painting A Door
8:42 Overspray
10:16 Compressor Performance
10:45 Spray Gun Performance
10:58 Clean Up
11:44 Why I Wanted To Start Spraying
My new compressor is the ABAC Montecarlo OS20p (not a sponsor)
My new spray gun is the ANI R160 (not a sponsor)
This video is supported by Milwaukee, check out their full range here: uk.milwaukeetool.eu/?...
12v Drill docs.google.com/spreadsheets/...
#painting #aircompressor #spraying
Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications
HELP SUPPORT THE CHANNEL:
Support with RU-vid channel membership: / @ragnbonebrown
Support with Patreon: / ragnbonebrown
Support with PayPal paypal.me/ragnbonebrown
MY TOOLS:
For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn from qualifying purchases.
UK affiliate store: www.amazon.co.uk/shop/ragnbon...
US affiliate store: www.amazon.com/shop/ragnboneb...
SHOP:
Etsy: www.etsy.com/uk/shop/KeithBrow...
teespring.com/stores/rag-n-bo...
LINKS:
Website: www.ragnbonebrown.com
Facebook: / ragnbonebrown
Instagram: @ragnbonebrown
Twitter: / ragnbonebrown
Email: ragnbonebrown@gmail.com
Second RU-vid Channel (non woodwork videos): / keefykeef

Хобби

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 303

@andresfeliperamosromero3060 10 месяцев назад

I bought this nail gun as we were planning to renew all the fencing in our back garden. As this involved 19 double slatted fence panels, 10 of which needed to be cut down in size, we knew there would be a need for a great ru-vid.comUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt deal of re-stapling the wooden slats to the wooden framework. Each alteration required the re-stapling of 62 wooden slats with double staples. Prior to starting the work we ordered sufficient additional staples as per the instructions with the gun.The gun performed fantastically throughout the entire project with no jams of misfires. The adjustable power was excellent allowing the staples to be fired into the 8mm slats to the correct depth. For the price paid this was a bargain and it proved itself to be so reliable and versatile making an arduous task much quicker and professional. I cannot recommend this product highly enough and it will be used on many other projects in the future.

@Joshuahay123 3 года назад

That April Wilkerson Overlay had me in stitches! 😂

@Kris5344 3 года назад

Yup. One of those RU-vidrs that seem to have endless budget and time.

@bkav2007 2 года назад

Funny, Matthias Wandel had a dig at her recently too in one of his videos.

@MYEVILTWIIN 3 года назад

Love the tip of plugging the old hinge holes 👌

@garvielloken3929 3 года назад

The honesty is Refreshing!

@IEnjoyCreatingVideos 3 года назад

Congratulations! on the new upgrades to the shop Keith! Thanks for sharing the video with us!💖👌👍😎JP

@MrVernv Год назад

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. ru-vid.comUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

@roberthaslup9556 3 года назад

We are having a snowstorm here in Maryland at the moment and I’m binge watching your videos I love them you are the only channel I have ever considered to become a patron so I just might do it I really like your approach and delivery you are just like one of us ... keep up the good work !

@craigster12 2 года назад

Thank you. Great video. I just picked up an air compressor yesterday and intend on getting into spraying paint. Thanks again.

@philippoole3059 3 года назад

Love following you on RU-vid, like you, well into my carpentry. Like your no nonsense approach and honest reviews. Look forward to the next post!

@RagnBoneBrown 3 года назад

My Choosing An Air Compressor Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UCX4jVy35Wg.html 0:00 Intro 0:15 New Air Compressor 3:05 New Spray Gun 4:23 Painting A Door 8:42 Overspray 10:16 Compressor Performance 10:45 Spray Gun Performance 10:58 Clean Up 11:44 Why I Wanted To Start Spraying My new compressor is the ABAC Montecarlo OS20p (not a sponsor) My new spray gun is the ANI R160 (not a sponsor) This video is supported by Milwaukee, check out their full range here: uk.milwaukeetool.eu/?Social&RU-vid&Rag%20N%20Bone%20Brown%20-Milwaukee%20Range 12v Drill docs.google.com/spreadsheets/d/1cmoNp2-c4Q64SoZw8R3r-ZIXFvMSQGWj21BZboBa21c/edit#gid=1828591239 #painting #aircompressor #spraying Thanks for watching! Please subscribe, click like if you like, and hit the bell icon for future video notifications HELP SUPPORT THE CHANNEL: Support with RU-vid channel membership: ru-vid.com/show-UCVyE_6jEtVZGmYGXtUOL5FQjoin Support with Patreon: www.patreon.com/ragnbonebrown Support with PayPal paypal.me/ragnbonebrown MY TOOLS: For links to the tools I use, plus some of my favourite consumables, finishes and more see links below. As an Amazon Associate I may earn a small commission from qualifying purchases: UK affiliate store: www.amazon.co.uk/shop/ragnbonebrown US affiliate store: www.amazon.com/shop/ragnbonebrown

@RiODeGee 2 года назад

Excellent explanation of why, when, and what to use. As someone actually researching what to buy to be a diy sprayer setup, you have the best advice and knowledge I found!

@RagnBoneBrown 2 года назад

Thank you

@trakside1 10 месяцев назад

Great tutorial for us beginners. It's always great watching your videos

@fgcvhhbvjhbj 3 года назад

Top quality instructional video, thanks!

@ag6477 Месяц назад

This video was well put together

@JaceTLittle 3 года назад

Great analysis as always. Happy you are happy with your choice. You shaking the can was hilarious. Keep up the great content. :-)

@adventuresofsven2314 2 года назад

Thank you very much for this detailed video.I learned a lot,and I love how to door looks.

@gudrune 2 года назад

Extremely helpful, thank you!

@MBSK-xw4ff 3 года назад

You're the best teacher! Thank you so much..

@petercoughlan103 3 года назад

As a general rule I keep adding water until the run off from the stirring stick doesn't stand up on the surface of the paint if that makes sense . Works for me anyway. Great vid👍

@2003Trailblazer 11 месяцев назад

I use the same method

@the9957 3 года назад

I have 20 years experience spray painting... great video.. great info 👍🏽

@Snip59 3 года назад

As it's water based u also need to clean the gun with thinners after cleaning with water as water will rust parts of the gun it's a must.

@paulrowley71 3 года назад

Very informative video. Cheers Keith. 👍🏻

@avroncotton 2 года назад

The cameo from April was gold! I almost spat my coffee!

@offi_alberto_wong_cial Год назад

amazing home, amazing job

@trakside1 3 года назад

Great video and has helped me out choosing compressor and spray gun

@jim9520 3 года назад

Thank you . That was very interesting. You are very thorough..

@brandonlemon2060 4 месяца назад

I loved your work on Wallace and Grommit.

@henryworkswoodandmetal 3 года назад

Very well done, really learned a lot👍

@thespraypainter2321 Год назад

You did well Buddy for a beginner.... thumbs up to you.. welcome to the spraying world..

@klausreviewscraftrestore3152 3 года назад

i had to upgrade my compressor a few years ago also, i got a 150 liter 4hp. works great for what i do.

@user-hf9jj6in6j 7 месяцев назад

Very useful and helpful video answered a lot of my questions

@frankslittleworkshop 3 года назад

Nicely done Keith 😁. So true.. I think my whole street could fit in AW's workshop. Her CNC bed is bigger than my workshop... but you have got to love her enthusiasm. Thanks for the video Keith 😁👍

@ToffeenoseToffee 3 года назад

Awesome Keith. I’m still unsure which way to go with this spraying lark. It’s a mine field when you’ve little knowledge on it. You’ve been a real help as your requirements are similar to mine 👍

@TordStromdal 2 года назад

Very informative. Thank you 😊

@painterman8863 3 года назад

Hi Keith enjoyed you video.When spraying in your workshop,i would recommend getting a portable paint extractor one of these does help with overspray

@DavidMeggers 3 года назад

Comin up: Spray booth project. Your videos are so inspirational, really enjoyed this (and I know I’ll be spending again). Cheers

@eyuptony 3 года назад

Brilliant Matt. The ANi R160 spray gun. Never heard of this low air volume pressure type but as soon as you pulled that trigger I was IMPRESSED. I could tell instantly by the fan and coverage straight away. As for tips; Don't skimp on washing your equipment it will come back and bite you half way through a job. This one is a must if funds allow; Use separate guns (hoses, pots etc.) for clear coat and pigmented finishes because no matter how well you clean your equipment the unwanted coloured spot will appear resulting in an additional unwanted respray lol. You have a good spraying technique. Tony.

@RagnBoneBrown 3 года назад

Thank you

@michaelrimmer2557 3 года назад

Great video, thanks.

@jtreg 3 года назад

Useful info thanks mate

@acampervanwithaview5718 3 года назад

Very informative. Thank you for that video

@jdavis6646 Год назад

Great job with the door

@TheWebstaff 3 года назад

I use a tray of water to pickup the over spray. Damp towel also works.

@deltajohnny 2 года назад

Very useful advices! Thanks a lot 😉😉👍👍

@andreamarletta6414 3 года назад

ABAC is a great great compressor. No regrets!

@MrFritzybabe 3 года назад

Saw an American guy on YT a few years back had a fold down spray booth from cardboard (about 6 feet cubed) with a small computer fan at the back. Perfect for the sort of projects you have in mind.

@ekim000 3 года назад

Good video. I sprayed all of the cabinet doors from my kitchen, 58 of the buggers, in a double garage and there was a lot of dust overspray when I was done. In hindsight I would have been very well advised to dust sheet and tape off everything.

@trufflepup1 2 года назад

Really enjoyed your straight forward, easy to understand video. Thank you for sharing. I'm just getting interested in straying - have no previous experience. You're absolutely correct about the high cost of rattle can spraying. I'm going to take your cue and research a little more about spray guns. it seems you can spend a lot of $$ or somewhat less and get the same result. Thanks again...

@awantamta 3 года назад

An interesting video. I haven't got a compressor but I can see its uses.

@lcmlcm2460 3 года назад

Good job 👍🏼

@welshkid12 3 года назад

Great vid! I’ve got a spray gun by too scared to use it 😂 may give it a try when the weather is nicer! Just wanted to say as I’ve been binge watching a lot of your back catalogue, your presence on camera has come on so much from your early videos! Well done bud, keep up the good work!

@RagnBoneBrown 3 года назад

Thank you

@ianvicedomini2648 3 года назад

I guess spraying leaves a nice level finish, well better than I could with a brush anyway 😁 great video Keith

@chrisshaw4689 3 года назад

I sprayed my van in cellulose with an 8 litre compressor lol , trust me , it did the job , after a mop and polish , it looked great , good video , cheers .

@sylvestersayai3188 2 года назад

I like this gun

@racinghome657 3 года назад

April seemed happy to make an appearance. Her shop is a touch bigger than the average UK woodworkers.

@RagnBoneBrown 3 года назад

She didn't even stay for a cuppa

@SeanBZA 3 года назад

@@RagnBoneBrown Her shop is a touch bigger than many people's houses as well.

@bloodgain 3 года назад

Most US woodworkers, too!

@patg4362 3 года назад

Her workshops bigger than most English counties 😂😂😂

@robertleyland4252 Год назад

HI Keith excellent thanks

@PhillWyattProjects 3 года назад

Good video👍 I don't know much about spraying with a compressor so this was useful.

@RagnBoneBrown 3 года назад

Thanks Phil

@foxglovemead 3 года назад

Always a good experience and learned something new too. HVLP method also delivers a much softer spray which reduces material waste - but there is a catch and that is that most guns of this type required a FAD of at least 6.5 to operate. To get that requires a CFM that's 50% higher on the compressor. Mostly this means 100 Litre dual motor with dual cylinders e.g. more expensive to buy (but there are a few exceptions). The benefit is using less paint e.g. the "Running" cost is reduced, but there is probably is no such thing as zero oversprays so some kind of spray booth would be a good idea. Most reviews of "used" equipment show it to be coated in a fine mist of paint. There is clearly a before and after getting a spray booth effect. Perhaps with an extractor fan in the outside shed, you could relax the 50cm rule and put the compressor where your old one was installed (without issues)? Would putting a regulator on the compressor be a good option e.g. to regulate the pressure for each device connected - that's how mine was supplied. Of course, regulating the pressure in the outside shed wouldn't work very well. FWIW I found a spray booth on Amazon that doesn't have a floor. At first, I thought this was a limitation, but the more I think about it, it fits in with a workshop e.g. you can lower it over two horses and a door, etc. and a dustsheet is easy to come by too. Simon

@RagnBoneBrown 3 года назад

Cheers Simon. I actually just created a spray booth (video coming soon!)

@elbenaso 2 года назад

great vid!

@kanedNunable 3 года назад

oh nice work on the dowells. i have a door that is a bit loose and that will work great

@tim_biller 3 года назад

Always great to see the hat! ;-) Also, 12:39 - ROFL! Cheeky.

@RagnBoneBrown 3 года назад

haha, it wasn't meant to look dirty, but turns out my "boredom" face looks a lot like something else

@chrisharrison6532 3 года назад

As usual Keith you put into it what you thought was the right way and had a good success always remember though your paint finish will only be as good as the preparation you put in well done though Keith another string to your bow

@RagnBoneBrown 3 года назад

Cheers Chris. I wasn't too fussy about the finish on the door to be honest, as most of our doors in the bungalow aren't exactly painted to perfect standards! Will definitely take more care when applying clear coats to future furniture projects though 👍

@FurnitureFlippingRush 2 года назад

Very helpful, Thanks ✨🌺✨

@scratchbuiltfarmmodels4783 3 года назад

Just a suggestion buy a cheap gazebo with sides for spraying in

@djVania08 Год назад

Any suggestions?

@AmaliaS 2 месяца назад

@@djVania08 pop up gazebo 3x3

@ProfSimonHolland 2 года назад

excellent.....just the process i am going through to dump a super loud compressor for a better and quieter model....cheers

@markharrison1884 3 года назад

Keith, 85dB LWA is a sound poWer level which is the level at source. Noise levels expressed as Lp are a sound Pressure level at a given distance.

@Wordsnwood 3 года назад

@2:05 ouch, them's fightin words, Sir. 😉

@Brian18741 3 года назад

Very good

@roberthaslup9556 3 года назад

I just love this channel of all woodworking channels I’ve looked at this is the best so far there may be better one out there but this gentleman is so relatable and is easy to understand will keep watching and enjoying it I in process of checking out all the older videos and can’t wait

@Landruman2002 3 года назад

April’s cameo visit was cute..!

@RagnBoneBrown 3 года назад

haha, I was tempted to put "featuring April Wilkerson" in the title but that would be way too clickbaity!

@Cradley684 3 года назад

Great Keith, lucky April with all that space mind you it is Texas LOL , Stay Safe Mate !!!.

@stevebosun7410 3 года назад

Hi Keith, don't underestimate yourself. Useful tips and information as usual. Have you considered something like a "pop-up" gazebo with sides for spraying outside? It will, protect the spray pattern from any wind and keep the finish uniform, keep wayward debris (leaves, dust, insects, etc) out, contain overspray, and may even allow you to work if it's raining. Just a thought. Could even double as additional workshop space in inclement weather.

@RagnBoneBrown 3 года назад

Yeah we don't really have anywhere to put one unfortunately

@jimspeed1388 3 года назад

I wouldn't worry to much about the compressor being where you have it as air can still circulate around it ok. I think the dimensions they give are to cover their arse if it was to totally enclosed.

@TheWebstaff 3 года назад

Mine lives in a box. Never missed a beat. Just have to take the side off in summer.

@julianniemeyer1655 3 года назад

Get a cheap angler's wind shelter as a paint tent to reduce drift

@cobberpete1 3 года назад

50lt should be fine. that's what I have for table tops and it meets the need. Quick fix for the hinge screws. push in a couple of matchsticks or toothpicks. A lot quicker and does a good job :)

@ryantcb 3 года назад

More spraying videos please

@grammybear4226 3 года назад

🐼 Big Bear Hugs from a 67 yr old grandma in Kirby, Texas, USA 🐼

@brandonlemon2060 2 года назад

You're an absolute savage not putting up sheeting around your work area in that shop. My wife would have me sleep there should I do that. XD

@grahamalexander7230 3 года назад

great informative video, ive been usung a compressor & sprayer for a few years now, one bit of advice ill share is never use the same gun for varnish or stains no matter how hard you clean the gun you will come to regret it... I keep a seperate gun just for varnish and one for stains ( cheep hvlp guns) hope this helps

@ildefonsogiron4034 3 года назад

I have just painted a bookshelf and stained it with a small gun. I thoroughly cleaned it, but staining colour never went away, so I intend to use it for that purpose from now on.

@vicrattlehead8665 Месяц назад

Man I’m a few days in to my new job in a paint department painting machines. Being in the garage we have when they’re painting is crazy. It looks like there’s a bunch of people smoking in there 😂 can’t wait to get my hands on that spray gun, I’m in the sanding phase hahah.

@christianjanes 3 года назад

That clip of you shaking a can is going to haunt you one day!

@RagnBoneBrown 3 года назад

🤣

@expatmoose 3 года назад

Puuuuuuurlease,,,,, there are ladies watching too🙈🤣😂🤣😂

@briancross6726 3 года назад

Someone is gonna turn it into gif

@shaunintheshed 3 года назад

Can shaking Keith needs his own channel!

@jverbeec 3 года назад

Would love to get into spraying, but as you mentioned there is quite a bit of dust around in my workshop as well. Don't you end up with loads of dust in your paint especially because you blow it around with a fan? That's what really holds me back. Thanks for sharing your experience!

@geerttielens4374 3 года назад

You got April in your video !

@nicka99 3 года назад

Hi Keith Lwa is the sound power is the compressor, think of this as it’s total energy at source. With regard the sound levels Lp, you need to know the reference distance this should be measured at.

@samphire 3 года назад

When you showed the snow picture for the overspray I was like WTF lol

@johnd4717 3 года назад

April! :-)

@FuzzyScaredyCat 3 года назад

I like how you claimed the overspray was snow... ;)

@paulprescott7913 3 года назад

Thanks Keith that was really useful as im thinking of getting a spray gun for small motorcycle parts. My compressor lives in a similar place to yours and i never move it and have never had any issues. One question though how many times did you have to refill the spray gun go do the whole door ?

@BischBaschBosch 3 года назад

Interesting mate. Never sprayed anything using a spay gun and compressed air. Unlikely to either. But interesting nonetheless.

@queenbvanity727 2 года назад

when you were painting and you mentioned that some kind of piece of plastic landed on the door. It was from the Teflon tape That you put to tighten. sometimes a little piece will go through the air flow and we'll land on your painting surface..

@tippo5341 3 года назад

Door came up a treat, good job for first spraying effort. Cheers from Aus!!!!

@philipfullerton612 3 года назад

Only lube the brass fitting on the needle as this is the only part touching the inside of the gun. Nice video and keep up the good work.

@tonkatoy200 2 года назад

Is the vaseline a good choice for lube? The proper lubes are stupidly expensive

@nitestrike1000 Год назад

@12:40 The Too Much Coffee look

@paulbanks8583 3 года назад

Word of warning on over spray make sure your car isn't parked down wind. I know from experience as it was in the summer the drift went all over the car and baked on hard then had to spend ages getting off my windscreen 😕. Good Video as ever. Not 100% sure that is an original door as the shot of the bottom it looked like it was put together with dowels and for that age I'd expect mortise and tenon joints. 👍

@luisc1748 2 года назад

My friend, for the future, when you have holes that are bigger than the screws, get some wood toothpicks and wood glue, coat the toothpicks with glue, good coat of glue and stick them in the hole, let them dry and after the glue is dry, cut off any of the toothpicks that are sticking out and attach the door and screw away.

@aaroncastellanos3421 3 года назад

I just started myself with a spray gun from harbor freight. I used latex paint and i thinned it down with water, but the paint barely came out. :( So i suspect i didn't thin it down enough. I'll try again with another project in the near future.

@fgcvhhbvjhbj 3 года назад

Thanks for the video 👌 if you are using regular paint do you have to thin it down or anything to go through the gun?

@paolo12683 3 года назад

Nice review! I would also be interested in buying the same compressor! Is it possible to know how many minutes the motor can work without interruption?

@daverobinson6384 3 года назад

Should have gone with the Hyundai. I bought one and still can’t believe how quiet it is!!

@Unlovable 3 года назад

Wow, paint/varnish spray cans are expensive in the UK, I've been buying varnish spray cans for 2 euros per can which is still too expensive, knowing how much is really inside but It tends to dry way quicker than the paint can version in my experience. Great video! that spray gun looked very high quality

@RagnBoneBrown 3 года назад

That's true they do dry super quick! 👍

@SeanBZA 3 года назад

I have found though that the cans with only clear lacquer in them are the ones that tend to leak, as all the cans I had with clear in them lost the propellant charge fast, and often you had the clear ooze out at the base seal. I guess the paint particles in the other cans provide a seal that is better, as they rarely do leak. Yes I used to buy the cans in bulk, as they are convenient when out and about, and also are a lot lighter to take up on a roof or up a ladder to do some corrosion protection on metal.