Getting Started With Tube Bending & Tube Notching | JD Squared Bender & Notchmaster

Подписаться 883 тыс.

Просмотров 48 тыс.

50% 1

Learn how to bend tubing with the JD Squared Model 3 Tube Bender and how to fish mouth tubing with the JD2 Notchmaster. This is a general overview of getting started. Typically a tube bender is bolted to the floor but since I need to make mine mobile I'm using the Swag Off Road ram mount to adapt an air/hydraulic ram to my tube bender. This allows me to use an air compressor to effortlessly bend tube to any degree. After bending I show how to fish mouth and tube notch the tube for a proper fit and strong weld. All of the tools and material sources are listed below.
If you want to learn tube bending from a master I suggest the following videos from ‪@TheFabricatorSeries‬
Tube Bending Basics 1: • TFS: Tube Bending Basi...
Tube Bending Basics 2: • TFS: Tube Bending Basi...
Tube Bending Basics 3: • TFS: Tube Bending Basi...
Here's a great video by ‪@bleepinjeep‬ on installing the Swag Off Road Ram Mount: • Swag Offroad Air/Hydra...
And another video I suggest watching by ‪@WingsWorldChannel‬ for prepping your tube for welding: • FAB 101: How to PROPER...
★ TOOLS / SUPPLIES ★
JD2 Model 3 Tube Bender: bit.ly/2WHBCsa
Model 3 Die Set - 1 1/4" Round: bit.ly/2UunUpE
Notch Master Tube Notcher: bit.ly/38phWLw
SWAG Hydraulic Ram Mount: bit.ly/3aeHZag
8 Ton Air / Hydraulic Ram Bottle: ebay.to/3acuk3k
1.25" DOM 0.083 Tubing (Bowling Green, OH): bit.ly/3boBUZ0
Air Compressor: amzn.to/2VI5dRC
Digital Protractor: amzn.to/2UvThjC
Digital Angle Gauge: amzn.to/2Uj5utf
Drill (overkill): amzn.to/2JewYJY
Lube Oil: amzn.to/3bs3nZx
Hole Saw Bit: amzn.to/2xiKsBQ
Belt Grinder: bit.ly/2FEIufS
Welding Table Top: bit.ly/38tpbT2
Welder: amzn.to/2wycubZ
Welding Helmet: amzn.to/2xbnTir
★ WATCH MORE ★
Getting Started in Mig Welding: • Getting Started in Wel...
My Metal Shop Tour: • Garage Metal Shop Tour...
★ ALL THE LINKS ★
Music by Me: goo.gl/fgyup2
Patreon Support / Extra Content: / picciuto
T-Shirts / Books / Stickers / Plans: makesomething.tv/
Making It Podcast: makingitpodcast.com
★ FOLLOW ME ★
/ drunkenwood
/ makesomethingtv

Хобби

Опубликовано:

23 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 124

@JesseLavery 4 года назад

"Hoosier Daddy" 😂

@KenRobidoux 4 года назад

I love the direction this channel is going. I haven't given a damn about anything you've posted since the beginning of the year and I've watched every video at least twice. Get 'em, Dave!

@MakeSomething 4 года назад

Three things... I should have referred to the hydraulic ram as an AIR hydraulic ram. yes, I'm aware you can have removable bolts in the concrete to fasten and remove the bender. Yes, some people prefer to notch with an angle grinder. Thanks and stay healthy and safe!

@slackreviews 3 года назад

@@harrisonofthenorth The ram is hydraulic, and is pumped using air. Think of a jack, instead of pumping the handle up and down that action is done with air.

@slackreviews 3 года назад

@@harrisonofthenorth did you read my first reply it explains it? It is a hydraulic piston. It is not a pneumatic piston. Typically hydraulics use an electric pump to pump the hydraulic fluid. This uses air to run the pump. There are also manual pumps, like a jack for instance. I hope this makes sense.

@slackreviews 3 года назад

@@harrisonofthenorth hey guy I’m sorry you can’t understand. You seem to lack a basic knowledge of anything mechanical. Nothing I said was conflicting. I’m not in a corner you are in a corner where you can’t seem to see that this hydraulic cylinder uses air to drive the pump. Something powers the pump in any hydraulic system. Do you at least understand that? The air and hydraulic fluid do not mix, the air powers the pump. It could be operated by hand like the lever in a jack or an electric motor or in this case air turns the pump that pumps the hydraulic fluid. If you don’t understand that I don’t know what to tell you. I’m done wasting my time trying to explain. Google it! They sell these air/hydraulic pistons. If you spent just 10% of the time spent trying to argue with me on increasing your reading comprehension we wouldn’t still be talking about this.

@nscr2 4 года назад

Man, sitting here in the evening having a couple adult drinks and your helmet comes down in the middle of your speech. I think I peed a little. Keep up the great work. I love your passion

@MaxMakerChannel 4 года назад

Cool to see some metalworking! After watching woodworking videos for 10 years, I feel like there isn’t a lot left to learn. Not that I am great at woodworking, but in terms of videos I had all the lessons : )

@johngoode6787 Год назад

I'm a kart builder from Australia looking at a bender to make my own chassis so thanks for the overview I liked you vid.....no bullshit straight to the point. Looking forward to seeing footage at the track. Cheers John

@SeanFoushee 4 года назад

LOVE seeing you expand into different mediums and a new hobby as the passion you have in everything you do is infectious. Looking forward to the fiberglass videos.

@Nikeboy919 4 года назад

This is awesome David. I raced karts for a number of years growing up, never made my own chassis though. It's good to see you so genuinely passionate about the new hobby and skills you're learning metalworking. Glad you're allowing us to have a glimpse and follow along. Your attitude and energy is an inspiration. Thank you

@pigsty-productions 4 года назад

Learning a new skill along with some new tools. Cant beat that!

@JkCanvas 4 года назад

Love your passion and excitement during this project. Keep going and proud of you for taking on this project. Cannot wait for the cart to be on the track.

@BitsandWood 4 года назад

Cool to see the process behind this!

@andyiliff7793 4 года назад

Love the video, David! I'm glad you're enjoying the go kart build. Thanks for sharing and being so open and transparent with your setup and costs.

@chrishand259 4 года назад

I love great content but I also love great people. With this channel I get the best of both. David you seem like a genuinely great guy. I love your enthusiasm for making and learning new things. Thank you for sharing your passion with us!

@ChristianBrink 4 года назад

Ohhhh excited about the fiberglass work!!

@TheFabricatorSeries 4 года назад

I appreciate the links! Not many people do that anymore.

@MakeSomething 4 года назад

Thanks for the great videos!

@madroot 4 года назад

Good job, Dan!!!

@GeraldJensen 4 года назад

I built my first go-kart when I was 12 ... did all of the cutting & welding myself. I put a Suzuki motorcycle engine on it ... I had the only cart at the track with a 5-speed transmission!

@dustworm78 4 года назад

thanks Dan!

@matthewcarpenter4716 4 года назад

I will probably never do this but I always love your content. Thank you for posting and keeping our heads entertained! YOU ROCK DAVE!!!! Hoosier Daddy! (Thank your for the Easter Egg Dan!)

@MakeSomething 4 года назад

Thanks! When I saw that little Easter egg I almost lost it!

@GibClark 4 года назад

Cool stuff 👍👍👍👍

@jamessloanofficial 4 года назад

I learned a LOT from this. Thanks!

@FigmentsMade 4 года назад

I am very familiar with the moosh, gunk, yeugh making things seem not level. Nailed it!

@vandewieljeroen 4 года назад

Amazingly funny and great info! Thanks

@sgsax 4 года назад

Old school time from when you had to shoot your own video. 😄 I enjoy you most when your having fun, and it's pretty obvious here. Frame is looking good! Thanks for sharing!

@ryanmartens5667 4 года назад

Awesome stuff!

@rpederse 4 года назад

Good job, Dan 👍

@willraylee 4 года назад

Keep doing stuff like this!

@reforzar 4 года назад

Love all this stuff. All of it.

@maximinocastro 4 года назад

Super cool

@dsbally 4 года назад

Awesome Dave! That knowledge for metal working keeps expanding! Great to see your inspiration is coming back my man!

@twotopsturning6493 4 года назад

Nifty trick to keep the bends in line

@dsquires16 4 года назад

Nice foray into metal fab. Enjoy the go cart project! Thanks for the great content.

@miketrent7976 4 года назад

Hoosier Daddy was brilliant. Thanks for posting, David. I’m quarantined and am starved for entertainment. You delivered!

@n0rth3rnlight 4 года назад

Have been waiting for This :)

@russelleaston1832 4 года назад

I like this video; good work, Dan!

@garysteele9141 4 года назад

Awesome video!

@mandytrosky1888 4 года назад

Love this. Not something I do but definitely interesting to watch!

@joshuatharpe9397 4 года назад

I am not interested in metal working but I really enjoy watching you discover new hobbies and skills. Keep going!

@JonathanRansom 4 года назад

I laughed when your welding hood fell down in the middle of your outro speech.

@jljmonky 4 года назад

I didn’t scroll through all the comments so forgive me if someone recommended it already, back in my exhaust making days we had a 360 degree dial that clamped into the end of the pipe. Zero it for the first bend and then when you turn the pipe for compound bends you know exactly where you are in relation to zero degrees.

@MakeSomething 4 года назад

Brilliant! Thanks!

@pravious 4 года назад

👌🏽 Good stuff. Thanks, sir.

@grahammoss5373 4 года назад

Really enjoyed that vid David, you’ve inspired me to get into welding. I’m going to do my kids a jungle gym.

@Jeppe.P.Bjerget 4 года назад

Great video. Easy learning. Have fun and a great week from Jan in Norway

@Supramonk 3 года назад

Top congrats from Portugal

@WingsWorldChannel 4 года назад

Awesome video! A lot of good information packed in for people to learn. My brother and I appreciate the reference as well, good luck with the project!

@MakeSomething 4 года назад

thank you! ❤️

@billdiehl156 4 года назад

I didn’t know if I was going to enjoy this video, because I really haven’t had the time to practice my welding. But I will say that I really had a great time watching it! The excitement you show for your newest (and expensive) hobby in as infectious as Covid-19!! Just to keep you in the loop: last Tuesday I was able to take my first steps on my prosthetic without a cane or walker. Two days later, I was able to walk two laps around the gym. Of course, the next day, they closed the rehab hospital for at least the next 30 days. SMDH Gotta thank you for giving me motivation to keep working hard to some day - very soon - to get back out to my shop!!

@MakeSomething 4 года назад

Thank you Bill! Always appreciate your encouragement! Great to hear about your progress! Hope you can still rehab and progress at home.

@w4bbitseezin 4 года назад

love seeing this different kind of content man, wish every channel would mix it up a bit!

@dandavis5832 4 года назад

Great video Dave!! Your welds are looking good!

@damienbrand9422 4 года назад

Thank you Dave!! Take care :o)

@chriscarskaddan64 4 года назад

Great stuff, as usual! Just be careful flying around the track!

@Kkuts37 4 года назад

Great!!!

@DennisNestor 4 года назад

Top Notch!

@jeffmorlen 4 года назад

I made a bender from scratch that mounts the dies vertically as to not take up much space and make the unit mobile. I use a standard HF jack to bend the tubes. It was originally made for late model race cars (lefthander chassis and such). Uses the same dies as what you are using. You should make a bender from scratch!! :)

@MakeSomething 4 года назад

Oh nice! I've seen many late model races in my day! Jack Hewitt!

@FredMcIntyre 4 года назад

Awesome stuff David! 😃👍🏻👨🏻‍🏭🏎️👊🏻 .... Nice edit Dan! 😃👍🏻🎞️✂️🎞️👊🏻

@PeterOConnl 4 года назад

Taking up racing and your love of red leads me to one conclusion; You are the incarnation of Lightning Mcqueen Kachow my friend, Kachow

@ddutton0 4 года назад

thumbs up for Dan!

@Matlock69 4 года назад

Cool focus bro!!!! 😂

@garagemonkeysan 4 года назад

Great video. Good instructions. You make it look easy. I see a custom built chopper in your future. : ) Mahalo for sharing! : )

@markgonzalez4070 3 года назад

Kart frame looks nice!!!! Keep the videos coming! Been trying to find plans for one like that. Do you by chance have plans you would share or sale? Trying to make one for my son.

@NickDClements 4 года назад

4:00 I like that tire, that's a nice tire.

@christobar 4 года назад

Dan definitely made the difference.

@AlexSwavely 4 года назад

There's also lower priced intermediate options with a ram similar to a bottle jack or porta-power that you hand pump.

@lennyrossa834 4 года назад

how is dan doing,im in process of designing my ebike and this vid has helped my process and im watching that vid you linked too.thank you

@cameradan7648 4 года назад

Very well, I'm getting pretty good a being bad at piano.

@KelvinNishikawa 4 года назад

Every time you ask for Dan I flash back to the drill press video where you needed help as it was falling and I panic a little.

@MakeSomething 4 года назад

Haha!

@hallkbrdz 3 года назад

How did you make the 2-axis bends with the tube from the waist to the front wheel spindles?

@thegunguymartin 4 года назад

David... It's cool to see ya in the metal shop .... Love the video ! Where's Dan 🙏

@TetraCNC 4 года назад

Finally get to see ya work on the cart. I don't care a lick about metal working but still liked your video, and you don't need to race to run your cart.... Hope Dan is gonna be ok there. Ohh and stuff is hot right after you cut it.. I know you knew that and were just educating us right :-)

@MakeSomething 4 года назад

😁👌🏻

@jamesblevins6078 4 года назад

See you at the GBurg track!

@codykellogg9634 4 года назад

Haha, how good was that weld after jumping in so quick after that piece to camera there at the end 😂? I suppose if you already knew you needed to remake the part, it wouldn't really matter if it wasn't perfect, so good production value😉 .

@quintdewit4870 4 года назад

1 vid a Day i Like it

@MakeSomething 4 года назад

Coming back tomorrow with another!!

@quintdewit4870 4 года назад

@@MakeSomething i am living the quarantine

@jameswilliamson9902 2 месяца назад

Where did you get the air filter uptick

@TheMWGriffin 4 года назад

Super dope dude! I like how detailed you get. Also metal is just insanely cool. Do you have a day job? Or is Make Something your full time gig?

@MakeSomething 4 года назад

Thanks! Make Something has been my full time gig for the last 5 years!

@TheMWGriffin 4 года назад

@@MakeSomething Damn straight dude! Way to go. Did you gradually work up to doing that or just jump right in full time?

@MaltandMake 4 года назад

Honestly far less complicated than I thought... and I have the model 3 too!

@evanbarnes9984 4 года назад

Is that ram actually hydraulic? Like, is it using air pressure to drive a hydraulic pump when then moves the ram with hydraulic fluid? Or is it all just air pressure doing the work? Because if it's all just air pressure, then it's a pneumatic ram, not hydraulic

@MakeSomething 4 года назад

Please see my pinned comment. Thanks.

@andyyg 4 года назад

Too bad you wont film the gokart build!! Would love to see that

@MakeSomething 4 года назад

I’m going to make a video of me putting it all together once the frame is done!

@andyyg 4 года назад

@@MakeSomething Awesome! Looking forward to it

@maximinocastro 4 года назад

You should use these techniques to make some cool chairs

@MakeSomething 4 года назад

That's the plan! I also got a die for 3/4" tubing!+

@creepincat7399 4 года назад

What a coincidence, I just bought and fixed up a hydraulic pipe bender.

@BestUnderPressure 4 года назад

I raced for about 5 years. The racing bug is a disease that has no cure. Drive fast, take chances.

@masterofnone 4 года назад

3:56 That's what he said !

@chapmanry 4 года назад

Dan? Where's Dan? Right, Dan? ...Dan? lolol

@dglatinx1 4 года назад

What about water bending?

@jeremysanchez4738 2 года назад

hey can you make a go kart frame tutorial

@417plasma6 3 года назад

Swag is 109.00...Harbor freight 8 ton ram is 99.00 great product for my shop

@802Leith 4 года назад

Look at you getting all Barney Oldfield

@MikeLtm32 4 года назад

6:32 you have missed your calling - with that noise you should have become a pirate. ;)

@jesseedmands9631 4 года назад

what welding table is that ?

@MakeSomething 4 года назад

From weldingtables.com

@SlickPickle88 4 года назад

Classic Picciuto

@ecrusch 4 года назад

You've got a really nice set up there bro. Looks like you're a serious cart builder. Now go get a wrench that fit's that tube-bender lock down bolt and quit using a pair of pliers. I still love you though. Remember, wash your hands.

@MakeSomething 4 года назад

How about I get a wrench that fits your ass? Wait. No. Never mind.

@MFunkibut 4 года назад

Why clone a chassis you already have? New one lighter? Need a spare? Tell us more...

@MakeSomething 4 года назад

Because I enjoy making things. And I don’t know how to improve on it yet without lots of laps and data.

@mcremona 4 года назад

I see you've crashed JD2's website #picciutoeffect

@MakeSomething 4 года назад

HAHAHAHA!

@fv_Haymaker 3 года назад

Dude I've been making bandsaw boxes with my class inspired by your videos and now I'm trying to figure out this model 54 in the shop and now I am here. You should come sub for me so I can go hunting!