Getting the PERFECT Fitment with 33's!! ANY RUBBING??

Подписаться 358 тыс.

Просмотров 142 тыс.

50% 1

Finally installing the new wheels and tires on my 3rd generation Toyota Tacoma!! . Today the RTX wheels finally go on the truck! It's been sitting in the drive way for the better part of the week and today it gets to drive some! The wheels are 17x9 with a 0 offset wrapped in a 33x11.5 tire. I could have gone a little wider, but I did save some weight with these tires and still have no rubbing. I think this is a good setup for now and can't wait to see if I get some better mpg as well, not that it's important but just something else to see! Stay tuned for more projects coming!
www.rtxwheels.com - bit.ly/RTXBROSF...
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
Music By: www.epidemicsound.com
#toyotatacoma #rtxwheels #3rdgentacoma #howto #wheelinstallation #nittotires

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 285

@skinnyboy4707 4 года назад

Did he say why he didn’t drive to the tire shop with stock wheels and have them dismount and mount the new ones?

@BrosFOURRSpeed 4 года назад

When I sold my previous wheels and tires, I had the truck on blocks because my wheels had not arrived yet which is why I had to borrow my dad's 4runner. I sold the stock setup along time ago!

@markdavis9510 Год назад

Don't do oil changes every 10k miles. It's too much. Trust me. Half is ok.

@BrosFOURRSpeed Год назад

My dad has 100K miles on his 4 runner doing oil changes every 10K miles and it’s fine! Synthetic oil is designed to last that long with regular driving.

@tylerbolton8695 Год назад

My hoa would be on my ass if I left my tacoma on Jack's lmao

@BrosFOURRSpeed Год назад

Lol, I had no choice but it was only a few days!

@K1ngDre-DMZ 2 года назад

Which rtx wheels are those? Your link no longer works

@BrosFOURRSpeed 2 года назад

Not sure why that link doesn't work, but here they are! rtxwheels.com/products/rtx-offroad-baja-satin-black-with-milled-rivets?_pos=7&_sid=5b7212137&_ss=r&variant=39277176422453

@Popwarner-x1w 2 года назад

How about rear end and front end gear ratio change.

@BrosFOURRSpeed 2 года назад

You don't have to regear with larger tires. It's not necessary, however, I did for the constant shifting and went with 5.29's for the 34's I'm currently running. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bd0aqwB2Nko.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SJm73yOzc_M.html

@t_0mie492 Год назад

Are you running stock height?

@BrosFOURRSpeed Год назад

Nope! It’s lifted! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html

@julestrdprodjimavicpro2869 4 года назад

nice Tires! voodoobluetacolife19💙🌮

@BrosFOURRSpeed 4 года назад

Thanks! Would you be interested in them at all? lol. I'm looking to upgrade at some point to the next size up!

@lossantoscity3249 4 года назад

Jump to 4:00 To get to the content! Thumbs this up for people to see. Thanks

@raydelfa1125 3 года назад

What tail lights do you have??

@BrosFOURRSpeed 3 года назад

I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!

@lordestrella231 4 года назад

I recently got a 265/70/17 nitto and I been experiencing some rubbing once i hit bumps while i turn plus I do want my mud flaps on do you think 265/65/17 will help me out at all? I also do mot have a lift on my truck wanna stay stock as possible

@BrosFOURRSpeed 3 года назад

That should be very similar to the stock tire size so not sure why there would be rubbing, but mud flaps usually get in the way so if you are rubbing now, you'll rub more with those on!

@robrawlins4870 2 года назад

Does your Tacoma have a lift other than stock ?

@BrosFOURRSpeed 2 года назад

Yes it's lifted! OME kit that added 4'' up front and 3'' in the rear! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40s6Asn5zcs.html

@robrawlins4870 2 года назад

@@BrosFOURRSpeed thank you.

@juandulcey9094 3 года назад

Wuaoooo super nice bro! I have the same truck as you, I want to upgrade my tires, I have a 17” TRD wheels, do you think 285/70r17 tires will fit on my truck with no rubbing? Also I have your same suspension

@BrosFOURRSpeed 3 года назад

I have 285/75/17 so those specs should be very similar to mine. I barely had any rubbing, maybe slightly in reverse on non level pavement, and some rubbing offroad, but not enough to trim anything. I've added spacers since then and did the CMC and pushed in the fender liners. You should be good with that set up!

@anthonyfratta4881 2 года назад

What are the wheel specs?

@BrosFOURRSpeed 2 года назад

These are 17x9 0 offset!

@alania2012 4 года назад

Why waste peoples time with unnesesary shit?

@BrosFOURRSpeed 4 года назад

You must not own a truck, lots of people have this question and I love making videos of my truck!

@alania2012 4 года назад

Bros FOURR Speed I’m talking about the first 4 minutes of you video man, actually video is very helpful after that , and btw i do own 2 trucks raptor and 2017 tacoma

@blue39503 5 лет назад

I always tell my dog Fergie what I'm doing and how long I will be gone .

@Lexusgx550 4 года назад

I am Blue you better get him iPhone or iPad.

@raydelfa1125 3 года назад

I'd like to get them.

@BrosFOURRSpeed 3 года назад

I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!

@JR-hr2xs 5 лет назад

17s 👍🏼👍🏼

@TomCalilaphitherepeople 5 лет назад

Replace the bumper.

@BrosFOURRSpeed 5 лет назад

That'll come!

@midnighttacomaman1088 2 года назад

I know it’s two years since. But can you tell me On this set up what offset exactly are Those rims?

@BrosFOURRSpeed 2 года назад

Those wheels had a +10 offset! So it was a 285/70/17 with the 17x9 +10! It was a good setup for a smaller tire!

@paulbrownwhpd 2 года назад

Did you have to use a lift to get those tires to clear? My TRD Off Road is supposed to be here the end of the month and I’m changing tires and wheels before I pick it up.

@BrosFOURRSpeed 2 года назад

Yeah! You need at least a leveling kit to clear up front. Depending on width, some trimming might be needed too! I’ve done the CMC, and a new alignment for more clearance.

@FUCCOD 4 года назад

Those look nice, looking for some for my bone stock 17. Dont want to get a lift.....not yet at least. :D

@jonbakerocbpro8802 Год назад

What’s the wrap on the rear end? I have some nasty scratches on my bed from off-roading I want to cover up.

@BrosFOURRSpeed Год назад

The first link is this wrap! Second link is what I currently have! It's not too hard, just time consuming! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZF99HDA7HSA.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--5WRcWRQQkU.html

@mariosciore3527 2 года назад

hi when putting bigger tires do you have to do anything to the computer I have a 2021 Tacoma TDR off road wanted to go 1-2 sizes bigger

@BrosFOURRSpeed 2 года назад

Nope! The only thing I would mention is the speedometer recalibration, but even with the 34's I'm running now, I'm off by like 4 mph, but it's not worth the $400 to me to buy that and change it. Other than that, you'll be fine with slightly larger tires!

@macymathews2534 2 года назад

Do you happen to have or remember wat ur alignment numbers where on the 33/12.50's u took off? Im having a hard time getting someone to get the alignment correct....also did u replace ur UCA's?

@BrosFOURRSpeed 2 года назад

So I went with the factory spec settings after I installed the lift and got these tires because I wasn't sure what I needed. I do have SPC UCA's, but now with 34's I have a new alignment needed to have no rubbing! Check out this video and hopefully that can help! I have the spec sheet shown in this video! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MJK8c0pBKPs.html

@macymathews2534 2 года назад

@@BrosFOURRSpeed thanks 👍

@BrosFOURRSpeed 2 года назад

@@macymathews2534 No problem! Are you going to that size?

@macymathews2534 2 года назад

@@BrosFOURRSpeed i have 33/12.50/20s on it now and was jus curious wat the alignment #s were and if new UCA s where needed

@BrosFOURRSpeed 2 года назад

@@macymathews2534 I rubbed some, mainly in reverse, but those were 33x11.5 so I had room. I had 33x12.5 on my first setup and had zero rubbing with the right wheel offset so it can be done without aftermarket ucas.

@jameshoward3071 5 лет назад

What offset did you use on the wheels

@BrosFOURRSpeed 5 лет назад

James Howard These are at 0.

@FranciscoGalicia 4 года назад

can i put 285/70/17 with the original 17" wheels? thanks

@BrosFOURRSpeed 4 года назад

You should be able to! What's the width on the 17's? I believe they are 7'' wide, so you just have to make sure the tire can accommodate that width. For example, the tire may hold a 7-9.5'' wheel, so just double check!

@p_chaney283 3 года назад

What brand tire did you go with?

@BrosFOURRSpeed 3 года назад

These are the Nitto Ridge Grapplers! I've had a few sets since then and I love them!!

@p_chaney283 3 года назад

Are they loud when driving down the road? I was going to go with the BF Goodrich but everyone complains about the loud noise when driving down the road.

@BrosFOURRSpeed 3 года назад

@@p_chaney283 These are quiet like stock! Very good on road tire and does great on the trails too!

@rustytime 5 лет назад

Looks sharp as they get to me. You guys definitely have and have had some really nice vehicles.

@akabigchungus1436 3 года назад

Lol who doesn't try to race tacomas once I installed my MF exhaust everyone tries to

@BrosFOURRSpeed 3 года назад

I don't race my tacoma at all lol, it's a truck..that's why I have my R8 to go fast! But if you want to, go for it!

@josegonzalescastillo5776 3 года назад

My wheels are 17*9 can I put 285/70/17 tires with out lifting my truck?

@BrosFOURRSpeed 3 года назад

You will have rubbing, but if you cut/trim enough they will work! You will most likely have to do the cmc!

@mredofsc1937 4 года назад

Are the upper control arms stock? Tires look great on your truck!

@BrosFOURRSpeed 4 года назад

Thanks! And they are the SPC arms!

@bjdulay587 4 года назад

Is 285/75r16 going to fit with a leveling kit and a 1.50 wheel spacers? 3rd gen taco?

@BrosFOURRSpeed 3 года назад

You will have to trim with the wheel spacer. Currently I am running 285/70/17 with a 1.25'' spacer and I had to do the CMC for them to fit, you would be good without the spacer though.

@juanamador3384 4 года назад

Felt bad for Matty .. alone in a dark room so sad smh

@MsAce0424 3 года назад

Did I miss the ET? WERE THOSE ET:0? Wondering because I want to chemfe my set up. I like this one. Looks great

@BrosFOURRSpeed 3 года назад

What do you mean by ET? Here's the specs if this helps....Wheels are 17x9 with a 0 offset and I was running a 285/70/17...I now have 305/70/17 which still fit great!

@MsAce0424 2 года назад

@@BrosFOURRSpeed ET is another way of saying offset. When we order them at my shop, they just show ET. Instead of saying offset. Sent it out to you by habit. Much appreciated. Thank you

@dossfishing3821 4 года назад

I just got a sr5 2020 Tacoma what’s the biggest tire you can fit on stock rim and without rubbing

@BrosFOURRSpeed 4 года назад

I'd say about a 31 would be max. Might hit off roading at hard angles tho. Can always do a leveling kit tho if it does. 1in strut spacer and 1in rear block. Like $300 and super easy to do

@p-51mustang51 2 года назад

Help! Just got some brand new nitto ridge grapplers installed on my Tacoma yesterday. They look great, but they rub on my mudflaps pretty badly when turning in reverse or just slightly tapping the brake while turning. It’s a pretty big area they’re rubbing on. Is there a fix for this? I’d like to keep the OEM flaps because of the classic Toyota look and protection of my paint but I noticed you didn’t have yours on. Do you notice much paint chipping? Thanks so much!!!!

@BrosFOURRSpeed 2 года назад

I've never had any paint chips even from the 34's I'm running now! This truck never had mud flaps on it! I've put 45k miles on this truck and never experienced a paint chip from the tires! Two things you can do! First is trimming! If you can even heat up the mud flap and push the plastic away from the tire, might be able to get by with that! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qEU_W3RDQY0.html If it's really rubbing a new alignment is the way to go! I don't have any rubbing with the 34's after that! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MJK8c0pBKPs.html

@p-51mustang51 2 года назад

You are the man!! 😎 Just took them off and seems to do fine lol. I just got an alignment yesterday when I got them installed lol! I’ll leave them off for a while and see how it goes! Thanks so much man, you’re the best!!!

@BrosFOURRSpeed 2 года назад

@@p-51mustang51 No problem! Now I do have the rock sliders which might help block anything from hitting the pint as well, so even if you have side steps that’ll help some too.

@p-51mustang51 2 года назад

@@BrosFOURRSpeed yep! I have side steps so that’ll be good! I want to do away with them and get sliders though lol. I have literally been watching your videos exclusively to do stuff. Like I installed the Hi-line front bumper based off your video! Next mod is the diff re gear if I can ever afford it lol! I appreciate everything man

@jameshoward3071 5 лет назад

What lift did you use how many inches and how has it been has yheee been any problems with it

@BrosFOURRSpeed 5 лет назад

It's an OME kit, and with 8k miles on the lift, I've had zero issues so far! 2nd link here is the height difference! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40s6Asn5zcs.html

@silverrockstar100 3 года назад

Where can I purchase new tpms sensors and how could you tell which ones are compatible?

@BrosFOURRSpeed 3 года назад

Your local tire shop should carry those and usually most are universal so you can really use any type.

@longevity7264 3 года назад

What offset is your rims? What brand name are your tires? What brand name are your rims? I like to buy 4 for my 2020 tacoma.

@BrosFOURRSpeed 3 года назад

The wheels are from RTX, 17x9 with a 0 offset. The tires are Nitto Ridge Grapplers. It's a good setup with no rubbing!

@longevity7264 3 года назад

It's this wheels came in size 17X8 with the zero offset or 16X8 with zero offset?

@BrosFOURRSpeed 3 года назад

@@longevity7264 I'm not sure, I think they were only 17x9 in the size I got, check the website though!

@AldapesExpress 3 года назад

What size lift do you have? Suspension lift?

@BrosFOURRSpeed 3 года назад

It's an OME suspension lift. I have about 3.5'' in the front and 3'' in the rear. Here's some measurements if you want to see it all! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40s6Asn5zcs.html along with the install! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html

@je8889 3 года назад

I purchased a 3" suspension lift for my 2021 Tacoma, includes aftermarket UCAs.. Any insights on if 285/70r17 will rub with a 17x9 (0 offset / 5 Backspacing)?? This video is very helpful, just not sure of exact wheel specs you have

@BrosFOURRSpeed 3 года назад

So my wheels are 17x9 0 offset with a 4.5'' backspace, I had 285/70/17's with no issues. I did do the CMC for some extra clearance behind the front tire though and recently went to 305/70/17 (34's). I also have aftermarket UCA's and tomorrows video is on a new alignment, definitely check that out because I don't have any rubbing with my 34's now!! With the right alignment, you may not even have to trim.

@je8889 3 года назад

@@BrosFOURRSpeed thank you so much! I may end up going with 275 / 70 /17 - would this almost guarantee no rubbing? The lift I settled for is ironman 4x4 foam suspension stage 2!

@tylerbrayden8747 3 года назад

Does anyone know if I run the same 33 in tire set up with a 2 in lift it would fit?

@BrosFOURRSpeed 3 года назад

There's a good chance they could fit, you might have some rubbing though to trim. I have a little bit of clearance with this lift, so if you are ok with trimming some they should fit.

@austinwantstoplay 5 лет назад

I was trying to figure out why you're truck looks familiar I've seen it while I was at work in Charlotte!! Keep up the vids man I just bought a 2019 Tacoma

@eddoberstein2956 4 года назад

What lift fo you have on your truck?

@mattorawiec6571 5 лет назад

Roof rack would look sick on Tacoma

@tybehler1700 3 года назад

How big a lift you got on there?

@BrosFOURRSpeed 3 года назад

3-4in Old Man Emu. Been a solid kit!

@pokeopening1113 4 года назад

How many inches did you lift in your Toyota?

@BrosFOURRSpeed 4 года назад

It's about 4'' in the front total and 3.5'' in the rear!

@donteandry5260 4 года назад

I have a 2019 4x2 TRD Pro. I have no interest in going off road but want 20 x 10 with 33" and ideally dont want an additional lift. Is it possible? thanks

@BrosFOURRSpeed 4 года назад

I don't think that's possible on a stock truck without trimming a lot. The pro has a bit of a lift which might help, but going 10 wide with a 33, it would have to be a skinny tire I think to fit. Are you ok with doing the cab chop mount and some trimming?

@jeangt9865 4 года назад

No the thing about 33" is that you would definitely have to slightly trim the back flaps on the front wheel setup especially when you are trying to make a full uturn in or out. The 33" would definitely touch the back end on the front fender's, but it's definitely fine on the rear end as in the back wheels, the fenders are pretty much spaced out well on the rear end. As long as you don't mind trimming out a bit you are definitely good to go with a 33"" setup. If not, once againl this is my personal choice and opinion upto a 32" setup is much better and you really can't tell the difference at a glance between the 32 and 33. But take it out to a tire or rim shop you check it out there and see for yourself.

@TheNiuhuskies09 4 года назад

If you're going offroad you don't want 20's with a 33. Should never go over half rim compared to tire. 33's should be a 16 inch rim at most

@Chann0097 5 лет назад

Hey bro’s for speed I need help I want to buy a gtr in the future but don’t know how much gas and service cost for a gtr I have a plan for the future on how I can get a GTR but I don’t know how much service and stuff will cost me! I’m 13 but I’d like to buy a GTR by time I’m 20-25 years old! I’m going to get a 350z when I get a job I’m going to try to get a older gtr like a 2013 or something but I would love to plan ahead and know prices so I’m sort of prepared!

@bwood9197 10 месяцев назад

how much is your truck lifted

@BrosFOURRSpeed 10 месяцев назад

It was about a 4in lift

@michaelmarcoux3157 3 года назад

Hey man , what's the lifted height ? 2" 3" ?

@BrosFOURRSpeed 3 года назад

It's right around 3.5'' up front and 3'' in the rear! I made a video on that if you want to see more specs on that! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-40s6Asn5zcs.html

@thatbluetaco1875 3 года назад

Where did you get your tpms sensors

@BrosFOURRSpeed 3 года назад

I think I either used the stock ones or the tire guys had them available I could buy

@electraglideclyde Месяц назад

Beautiful, any lift?

@BrosFOURRSpeed 11 дней назад

Thanks! Yeah OME 4in lift

@racermike182 4 года назад

Looks really good! Random question...what kind of dog is that? My neighbor's dog looks exactly the same and just curious.

@BrosFOURRSpeed 4 года назад

She's a labradoodle! and thanks!!

@ryan_rupe 3 года назад

What lift would I need to fit these? My taco is stock right now

@BrosFOURRSpeed 3 года назад

I have an OME lift kit, gave me about 3.5'' up front and 3'' in the rear. A leveling kit might not be enough, but I'd say at least 2'' and depending on how much trimming you want to do as well.

@tannerdunlap4306 3 года назад

On stock wheels do you think a shit ton of trimming or even a cab mount chop would be needed? Plan on going 33s on stocks with a 2” leveling kit but not really sure. I really don’t want any rubbing lol

@dan32196 3 года назад

What size are the original stock tires?

@BrosFOURRSpeed 3 года назад

I think they were 265/70/16, it's been a long time since I've had the stocks!

@raydelfa1125 3 года назад

Looks amazing!!!!!! Sexy tacoma

@BrosFOURRSpeed 3 года назад

I appreciate that, thanks!!! It's been a fun truck so far with all the mods!

@grinch5071 Год назад

The thing on the Semi is a Gas Compressor skid. Looks brand new so its probably headed to a pipeline compression station.

@noeruiz3244 5 лет назад

Where do you order you tires from? And wheels

@BrosFOURRSpeed 5 лет назад

I got them from real truck.com and wheels are from RTX, that link is in the description!

@karendixon401 5 лет назад

You could rent a U-Haul small white van for a day $20.. but good you can borrow 👍 Cool tires

@kylestokley91 4 года назад

Quick question guys I’m running 285/70/17 with spcs. I got about a 3in front an 2” rear. Having some rubbing issues. Just wondering on your alignment sheet what caster/camber readings you got to make it not rub, besides off roading of course? Thanks

@BrosFOURRSpeed 3 года назад

Sorry this is so late! I can't remember exactly, but I know with my spcs, I had them basically set in the middle since I wasn't sure what to do with them. I'm going in for another alignment within the next week or so and will be making a video on that!!

@kylestokley91 3 года назад

@@BrosFOURRSpeed awesome can’t wait!!

@kylestokley91 3 года назад

@@BrosFOURRSpeed I got the recommended settings from runnin4tacos. They say for 33/285s and 34s to run them on F setting and for 35s an up to run them on G

@BrosFOURRSpeed 3 года назад

@@kylestokley91 Ok cool, I’ll definitely get it dialed in and I should be able to show my current alignment specs as well hopefully!

@titirititiri6360 2 года назад

Need cmc

@modXELA 3 года назад

Nice video, thanks. Would it rub with a 1.5" spacer? I'm thinking of installing the same setup.

@BrosFOURRSpeed 3 года назад

It will! I installed 1.25'' spacers and went ahead and did the cmc also after installing them! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mik0QQbeBpM.html CMC: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qEU_W3RDQY0.html

@modXELA 3 года назад

@@BrosFOURRSpeed Thanks bro!

@BrosFOURRSpeed 3 года назад

No problem! (on a side note, just installed larger tires lol, that video will be coming soon!!)

@modXELA 3 года назад

@@BrosFOURRSpeed thanks, i'll keep an eye on it!

@enginelife8449 2 года назад

Whats the lift on the truck

@BrosFOURRSpeed 2 года назад

It's the OME kit! Roughly 4'' up front and 3'' in the rear! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dcMd5BOT1pQ.html

@brianparris7020 3 года назад

Hmmm what’s bout 285/75r16?

@BrosFOURRSpeed 3 года назад

Those should be very similar to the specs of these tires so that should be good!

@brianparris7020 3 года назад

@@BrosFOURRSpeed and with suspension lift or without ?

@BrosFOURRSpeed 3 года назад

@@brianparris7020 With a lift, unless you don't mind trimming a lot!

@brianparris7020 3 года назад

@@BrosFOURRSpeed hmm for my Tire size what inch should I get ? I am following you lol

@jimh2061 4 года назад

Very nice truck! You apparently have done your home work on the tires and lift. Whats the stock rim offset compared to what you have now. Do they make rims the will set the tire out even more? Like maybe another inch.

@BrosFOURRSpeed 4 года назад

I think they are around +25 I think. New ones stick out like an inch farther than stock. You can get way more aggressive offset if you'd like. Some big diesel trucks run -44 and the whole tires/wheel sticks out. All depends on the look you're going for.

@CarlosGutierrez-ih4ni 2 года назад

@@BrosFOURRSpeed did you had to lift it ?

@americansoldier7776 5 лет назад

Tires look great! Love the vinyl, but I hate the 2 stripes on the door. I think it takes away from the back vinyl

@BrosFOURRSpeed 5 лет назад

I'll be changing that at some point, just haven't got to it yet lol

@americansoldier7776 5 лет назад

Bros FOURR Speed looks great overall though! Love the color, I have the VooDoo Blue. Just bought it a month ago :)

@evanselaban7058 4 года назад

What is ur lift height?

@BrosFOURRSpeed 4 года назад

4in up front and 3in in the back. It's technically a 3in lift, but those are the overall measurements compared to stock!

@MrRonhdman 4 года назад

Hello where did you get your grill? I have a 2018 sr5. Also. Can you recommend size of bigger tires for my 2018 sr5 I just recently bought. I’m looking for a better off road look with no rubbing and changing miles speedometer

@BrosFOURRSpeed 4 года назад

It's from BP fabricating! If you have a stock truck, try to stay within what the factory trie specs are, you can probably go a little taller and keep the stock width or do the opposite. Any larger both height and width is when you start to rub on stock height.

@2291adrian 5 лет назад

So much better than the last setup. Glad to see you stuck with the Ridge Grapplers!

@dreww2475 5 лет назад

Ridge Grapplers were my choice had I bit the bullet and gone 285s instead of 255s.

@steeltron4861 4 года назад

I have a 2020 sr 4x4 4 door. What is the tallest and widest tire I can put on the 16 inch rims?

@jameshoward3071 4 года назад

I have the 887 springs up front with no spacers added on my coils so 1 3/4 lift up front and about 3/4 in the rear. I have 8.5 wheels I was wondering if mine would run with the 285/70/17 I have 265/70/17 now

@BrosFOURRSpeed 4 года назад

Possibly, I do have a slight rub in reverse sometimes, so you may have that as well. It's nothing crazy now but at some point I'll have to do the cmc.

@herbertsungahid 4 года назад

You need to regear the differential with that large ass tires or your rpm is screaming high.

@BrosFOURRSpeed 4 года назад

Actually I haven't had any issues with that, the regear will actually make the rpm go up to help make the gears a little longer too. At 70mph I'm around 1700, with a 5.29 at 70mph it'll be around 2200. I've researched into that so it might be something I do, but right now I don't see a need to.

@trdrockwarrior_sport4432 4 года назад

Have you replaced your upper control arm how high is truck lifted I’ll guess it’s lifted 3” if so I’ll need to replace ur uppers they can’t get. Proper adjustment out of stock upper control arms ur front tires will wear soon that’s the problem I have my 2nd gen is lifted 3” I have 33’s and 18” rims I roll with kumho road adventure m/t’s. They’re are awesome tires I often wonder why people don’t use them tires you bought method wheels I love them that style my trick would look sweet my truck is that common grey color of Tacoma’s I have a channel of my truck it’s call Trd rock warrior sport check it out. Thanks

@BrosFOURRSpeed 4 года назад

I am running SPC UCA's, and it's about 4'' in the front and 3.5'' in the rear. I have thought about getting another alignment with them since they are adjustable.

@trdrockwarrior_sport4432 4 года назад

@@BrosFOURRSpeed ok i see thanks for responding

@LaoOregonOutdoors 4 года назад

Need help, thinking about getting 285/75/16 and i have an 3/2 leveling kit install do you think it will rub?

@BrosFOURRSpeed 4 года назад

It shouldn't, I'm running 285/70/17 so those tires are going to be very similar size wise, I only have slight rubbing offroad.

@RedWingsninetyone 4 года назад

I don't care what Toyota (or any manufacturer) claims, 10,000 miles is a ridiculous amount between oil changes. I use full synthetic and still have a hard time going past 5k.

@BrosFOURRSpeed 4 года назад

Yea I change it every 5k, but on my dad's 4runner he has gone every 10k and has 80k miles no issues.

@RedWingsninetyone 4 года назад

@@BrosFOURRSpeed I wouldn't expect to see issues that soon, especially with modern engines and oil, but it's still a risk.

@mikedewitt2769 4 года назад

Make sure it’s rust proofed and move on. Dents are badges of honor.

@JohnQuincy1776 3 года назад

That tire size is perfect.

@BrosFOURRSpeed 3 года назад

I actually went up to 34x12.5! Now I have the perfect setup lol! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oOjCrOaDLBU.html

@JohnQuincy1776 3 года назад

@@BrosFOURRSpeed I watched that, great video. It looks good but I still like the 285/70s. I am more mild, than wild. I have a 4Runner coming in. I am hoping to fit 275/70s on it to start.

@stevetrevino5346 3 года назад

Looking fresh !!!

@BrosFOURRSpeed 3 года назад

Thanks! Went up to a 34 since this lol!

@stevetrevino5346 3 года назад

Nice !!!

@agustinherrera5600 5 лет назад

Real nice set up . Im thinking of getting that same size tire . You think 285/75 /17 will rub ? Is there a huge diff from 285/70/17 with -12 offset wheel

@BrosFOURRSpeed 5 лет назад

I don't think there is a huge difference in those tires, but look up the brand you want to see the differences. -12 would definitely rub unless you had the cab chop. I'm at 0 offset, and they almost rub, if I had wider tires I would have needed the chop done.

@anthonygiordano3991 4 года назад

So, just to be sure I’m understanding you correctly. You’re saying if I get at least a 2” lift, with a 285/70/17 tire and 17x9 wheels with a 0 offset (backspacing between 4”-6”), I should NOT have to do any CMC or pinch weld mods? Maybe just minor trimming? I don’t off-road at all.

@BrosFOURRSpeed 4 года назад

My lift is about 3'', maybe a little higher and I had a 33x12.5 with a 19x9 +10 and didn't rub hardly at all, very minor rubbing even offroad, with my new set up there was zero offset, I had no rubbing until I added the spacers and did the cmc and pinch mod!

@anthonygiordano3991 4 года назад

Bros FOURR Speed - Which makes sense because by adding the spacers, it was similar to a more negative offset.. thus requiring you to now do the CMC and PW mods. So, what lift are you on? I was considering the Eibach pro truck lift, but I believe that’s only gonna get me 2-2.5” of lift.

@nismo613 4 года назад

An expensive wheel and tire setup, with a cheap balance. Makes sense.

@BrosFOURRSpeed 4 года назад

It's not a cheap balance...

@canadacustomautoworks 4 года назад

Haha aggressive setup nothing a little trimming can't fix

@BrosFOURRSpeed 4 года назад

Luckily I didn't have to trim anything for these, but the next setup I will!!

@DRUMZ4LIFE82 4 года назад

Are those METHOD NV knockoffs or something??

@BrosFOURRSpeed 4 года назад

They are from RTX.

@nathanpatrick7094 4 года назад

Like that look 33”x12.50 on Tacoma think of get one plus with 2 “ lift will be fine

@nosotroslosmexicanos2178 4 года назад

The truck looks awesome one quick question i have a 2018 4 runner stock tires are 265/70/17 i want to go up 285/70/17 should i need spacers ?

@shuaichen8690 3 года назад

Don’t use spacer.

@abualwalid9999 5 лет назад

👍

@tjisitthatobvious304 5 лет назад

Wow your truck looks nice you should give it a high lift

@dragonite986 5 лет назад

I just noticed there are two r's in fourr.

@BrosFOURRSpeed 5 лет назад

Yup, we carried that over from our old channel name and already had the double R logo going.

@jaredscott547 5 лет назад

I have -38mm offsets on SCS wheels and talk about rubbing....lol love the aggressive look tho

@BrosFOURRSpeed 5 лет назад

Yea that's aggressive!!

@Paradiddal 4 года назад

Jared Scott stock ride height?

@Ihaveadashcam 5 лет назад

Morimoto XB fog lights would look really good, match that black headlight look

@BrosFOURRSpeed 5 лет назад

I actually have some already that I had to switch out, but will be putting them back on to match!

@dopesquatch 4 года назад

Stock suspension? Or wat lift?

@BrosFOURRSpeed 4 года назад

It's lifted! OME kit with about 4'' up front and 3.5'' in the rear. Here's the first install for that if you'd like to check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-c1c0yfm7GXQ.html

@stantate1747 5 лет назад

Are you going to recalibrate your speedo?

@BrosFOURRSpeed 5 лет назад

I haven't done that, it's off by like 2 or 3 mph if that, if it was more than that I would.

@kaelillo 5 лет назад

Do you plan on doing forced induction to the Tacoma? It would be a good idea, especially with trying to push nearly 240 pounds of wheel and tire around.

@BrosFOURRSpeed 5 лет назад

That's a lot of money for a pickup. I don't see a need to do that, it performs fine with the weight.

@jessebam-bam7951 4 года назад

You need a lift kit at least a 4 but rather a 6 .

@BrosFOURRSpeed 4 года назад

I'm not going to cut the frame on this truck, I learned to not do that on my 2nd gen, but I have 4'' in the front and 3.5 in rear, I'm going to be putting larger tires on hopefully this year too!

@peteg7446 5 лет назад

Wow, looks way better than your other setup 🖒. I probably would have going with the 12.5 wide, but saving the extra weight is a plus 🖒.

@BrosFOURRSpeed 5 лет назад

Thanks! And yea I miss the little bit wider tire, but maybe I'll find one that doesn't weight as much for the next set up!

@dixienormous49 4 года назад

Where did you get your grille. I like it

@BrosFOURRSpeed 4 года назад

I got it from BP Fabricating! They have a good bit to choose from!

@jameshoward3071 5 лет назад

What was the exact size of your tires

@Lexusgx550 4 года назад

Any lift on your truck for 33 tires ?

@BrosFOURRSpeed 4 года назад

Yea I have about 4'' up front and 3.5'' in the rear.

@alteradojo 4 года назад

What is the offset bro looks nice

@BrosFOURRSpeed 4 года назад

0. Thanks! I might go to a -10 at some point

@johndenver5029 4 года назад

What trails did u go on at uwharrie

@BrosFOURRSpeed 4 года назад

Can't remember the names. But here is a recent vid! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-GKFmzOu2ixM.html

@dreww2475 5 лет назад

285s are the perfect size for a Tacoma. You'll probably still have rubbing on the cab but that's not the worst thing to be done. Definitely look better than 18" wheels, too. In terms of off roading you're probably better off with 16s (even more sidewall) but you get way more choices of tires, wheels in 17 luckily. Do 34s next, 285/75r17s. ;)

@BrosFOURRSpeed 5 лет назад

andrew wat Actually no rubbing on the cab for daily driving! If I kept the 12.5 wide, I'd definitely have to to the cab mount chop. I thought about a taller tire so well see!

@dreww2475 5 лет назад

@@BrosFOURRSpeed Daily drive doesn't have any flex though lol, off roading means your suspension articulates