Awesome video. The hardest part of my install was not knowing what to do. This video will help out. I would like to add that I zip tied the wires back around the air bag so the wires wouldn't interfere with a deployment.
you all prolly dont give a shit but does any of you know of a trick to get back into an Instagram account? I stupidly lost my password. I would love any tips you can offer me
@Gunner Andy thanks so much for your reply. I got to the site thru google and Im in the hacking process atm. Takes a while so I will reply here later with my results.
Were you able to utilize your center like as a "cargo" light AS WELL AS wire it up to an aux switch? I'm wanting to have my center light(white) come on same as my stock cargo light does when I unlock the truck, or press the cargo button in bed of truck. But, I also would like to turn on whenever I want to visit the Aux switch #5 inside my truck. I've been told this is impossible, but then seen what appears to be others having it setup that way
Thanks for the video. In the still picture at mark: 17:39 it shows a lot of the light hitting the bed of the truck instead of the ground. Would you recommend going with a tighter beam after running them for almost two years?
Really appreciate your instructional videos. Was considering one of these lights during the Black Friday deals, but held off because I was reluctant to blindly tear into the interior. Quick question, how are you routing the antenna wire to the radio?
adam0311 it runs along the harness. They are put together when routing. All as a bundle. Then you run the last section to where you want to install your radio.
The white wire with the Red tip. Also known as the “Reverse” wire. Were did you tap into that wire at? I was hoping someone would show us. I haven’t seen any pics on any of the Raptor forums or youtube videos.
Banksy you hook it up the same way the amber lights are setup. You choose a wire from the set in your kick panel, clip the white one to it and make sure you select the same color wire under the hood and connect it to the aux switch you want to use for it.
Did you put the weather striping on the vehicle or the mount? I put it on the mount and feel like it didn't seal 💯 on the top. Thanks again for the super fast shipping installed this weekend and love it.
If you see silverback raptor’s install video, he put the gasket on the truck early in the install, suggesting it goes on the truck first. I’d appreciate explicit clarification on this too. Hoping to install mine this week.
@@healyp I found it harder to try to align it the gasket on the vehicle. It left a small gap on the right side of the gasket so I placed a bead of cocking (You can't even see it).
May I know why you hooked up the wires to Aux switch? It should turn on the white light automatically when it reversed and the amber lights should turn on when the doors are open. I'm just curious what's the aux is for... :)
That's NOT the air bag attached to the trim, that is sound deadener, sorry, your video lost all cred with me, maybe if I continue watching, I can see installation with scotch locks.....smh.... never mind, I watched the whole thing, just because you have tools and think you can wire stuff up, please don't, you jammed wires in a butt connector with too much stripped off, left 1/8-3/16 hanging out, and you can shrink or tape it, but if you do the job correctly, you don't need to do either. On a good day, that's a hack job, a bad day.... a fire. I am amazed that people think you did a good job. Next week, maybe you can dabble into house wiring? This is the crap that gets people hurt or killed.