Go Kart Torque Converter Setup Install (TAV)

Подписаться 57 тыс.

Просмотров 686 тыс.

50% 1

The one in the video was discontinued but here is a link for 2 other similar ones.
1" diameter engine shaft: amzn.to/3fIofkf
3/4" diameter engine shaft: amzn.to/3uLqbgr
Here is a quick video showing the torque converter setup install. You can find these TAV torque converters all over the internet. They are cheap and easy to install. If you are going to be using your mini bike or go kart a lot or you don't want to take it apart very often then I would suggest getting a Comet brand torque converter. Yest they are more expensive but worth it in the long run. Do you want a Harbor Freight tool or Milwaukee! If you look carefully you'll get a sneak preview of another yerf dog go kart i'm restoring and rebuilding.

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 341

@jayma2733 2 года назад

Dude, thanks so much for this how to. Very thorough and attentive to detail. I also love your different angles showing how it works.

@-DIYPRO- 2 года назад

Glad it was helpful!

@jayma2733 2 года назад

@@-DIYPRO- Thanks again. I hope you enjoy the holidays and new year.

@-DIYPRO- 5 лет назад

No, Honda did not sponsor this video! Not that they would anyway, didn't realize how clear of an advertisement shot I gave them at the end.

@loganstarritt9515 3 года назад

My kids go kart has one and when ur climbing hills the belt slips and way of adjusting it ?

@sumanbaral8457 3 года назад

How can we put sprockets on the opposite side of CVT box??

@cynthiaayers7696 3 года назад

Use the rear pulley to turn a transmission. Back in 1969 they had a scooter called the Tule Trooper mountain bike and it had a 2-speed gearbox. It could either crawl up a tree or do 50 mile an hour.

@-DIYPRO- 2 года назад

I'd love to do that on my go kart.

@mejiasstore3879 Год назад

@DereksWorkshopAndProjects 5 лет назад

Cool to see it working, I have be aware of how they work for a while but never actually saw it working outside of a vehicle.

@flightautomatic4091 Год назад

TAV2-30 This CVT is complete shit. There are big losses on it, there is no run-out on my microbike at all, it rides as if on the brakes. The variator is semi-wedge, only one edge works, the second straight works only as a heat generator. There are no cooling ribbing on the cheeks of the pulleys, just cheap thin-walled iron stamping and that's it. It gets very hot even at low loads only due to its own mecanic losses. After long rides at low speed, the belt burns and fails. It lasts for 3-4 rides, and after that there is no acceleration, then it clatching only at high RPM and then it stops driving at all -> it's ready - the belt needs to be replaced.

@-DIYPRO- Год назад

True, these are the $40 ones, not the $400 comets.

@serenahees2289 4 года назад

What type of torque converter is this? I bought one and you cannot put the sprocket on the back side because there is a step down in the driven shaft and it is not channeled all the way across for the key. But I need a shaft that will do that for the setup I am trying to put on a mini quad.

@ChrisHillASMR 3 года назад

Use an angle grinder and adjust the key where you need

@TF856 8 месяцев назад

Are you sure that you got the correct torque on those bolts. And it looks like you need another spacer on that front pully. Or take a spacer off the driven one.

@-DIYPRO- 8 месяцев назад

Yep, 1/4 turn past max!

@MikeMallory-gf7ut Месяц назад

Will not fit on a Colman mini bike unless you cut a lot of the frame.and why would you do that

@-DIYPRO- Месяц назад

Good to know.

@expressionyourlife5203 Год назад

my torque converter is hard to bloom, how can I make the performance of the torque converter better?

@-DIYPRO- Год назад

There are springs that can wear out. Kart Fab on youtube has done some good rebuilding videos.

@arthursmith3092 Год назад

doesnt work on gulf cart duromax motor no speed can walk faster if moves at all junk 30 serious

@-DIYPRO- Год назад

You'd need a snowmobile size cvt for that size engine.

@damon3903 2 года назад

I have the right pull and what not and it vane off fine but won't go back on. Any tips?

@-DIYPRO- 2 года назад

Sorry, what's the issue?

@OneCupOfCoffee204 4 года назад

I'm just an old mechanic wishing I was still working and having fun like you guys. One thing I noticed is that you all are calling this a Torque Converter. I may be out of date but a torque converter is more like a fluid coupling. This is more like THE CONSTANTLY VARIABLE TRANSMISSION (CVT), it changes it's shape to achieve different speeds. This transmission is used in some Mazda vehicles, I just don't understand how the term Torque Converter was applied to this. Little things that get me lol. Next thing you know they'll be calling it Pound Feet instead of Foot pounds www.mazdavictoria.com/what-is-cvt/

@-DIYPRO- 4 года назад

You are definitely a car guy. They all say the same thing and I totally agree but I wasn't the one who came up with the name. For some reason someone called these CVTs torque converters and it stuck with the go kart guys.

@OneCupOfCoffee204 4 года назад

@@-DIYPRO- Oh yeah, definitely not criticizing you. I just happened to be watching your channel. I subscribed by the way. I like what you do and enjoy watching. Keep up the great work.

@ChrisHillASMR 3 года назад

@@OneCupOfCoffee204 a good way to think about it is how the word is used in application, if applied in a small vehicle = torque converter, if applied in a full size car its a CVT. You wouldnt put a fullsize CVT in a gokart but you would but a Torque converter in there.

@JeffMusicFL 4 года назад

Hey Mech Master! Thank you for all the great videos! I'm wondering, I've heard that the Chinese have like 10 different qualities for every part they make... Have you had experience with different brand clone torque converters? And have you used a Comet and gotten a feel for how much better those are and why? Trying to determine what to get. Is there a clone torque converter you recommend? I see on amazon the two top ones are a Moosun and a Mophorn. Thanks!

@EvrttGrn 3 года назад

I ordered a Moosun the other day for my Manco. I have a buddy that uses them as well. He says to order 3 to make 1 good one and send the other 2 back. LOL

@Deucealive75 2 года назад

You could see at the end of the video that the belt alignment is way off.

@-DIYPRO- 2 года назад

That may just be the angle of the video. The spacer/ mounting plate keeps the alignment straight.

@leeisenberg Год назад

Thanks for sharing. Can anyone tell me if I can put this t/converter on this old kart? : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2NYm4Q9L-dk.html

@-DIYPRO- Год назад

Yes, just make sure the one you get has the same size bore as engine output shaft. That looks like a predator enigne which has 3/4" diameter.

@leeisenberg Год назад

@@-DIYPRO- Okay cool. Thanks man. - take care

@ForwardMomentum 3 года назад

Thank you so much for doing this vid. It really helped me out even though I'm mechanically inclined, it was my first TAV install and I had zero instructions about how everything went together. Installed on my BT200X.

@RampOfficial 5 месяцев назад

How do you get the belt to stop spinning when engine is idle ?

@-DIYPRO- 5 месяцев назад

Can you turn or adjust your idle down without it cutting out?

@chrishall1025 Год назад

When I start my engine my belt doesn’t move help me pls

@-DIYPRO- Год назад

Is it just idling? It shouldn't move until you rev the engine.

@shampoo1991 Год назад

Did you not have to touque the bolts attaching to the engine?

@shaned304 Год назад

Yes they should be. I think he did torque them with his impact he just didn't mention it

@joneserupinsmoke9161 2 года назад

Hey if u change ur jet ur engine won't surg like that

@-DIYPRO- 2 года назад

Noted!

@EnduroHutch 4 года назад

Thanks so much. Father son project was successful 1st shot since we were able to double check our work through your video.

@-DIYPRO- 4 года назад

Awesome!

@alextrezvy6889 Год назад

What is the min and max transmission ratio?

@-DIYPRO- Год назад

Not sure, they don't say anywhere, my guess is because it's hard to measure since it's pulleys and not gears

@michelevitarelli Год назад

I never knew the sprocket could be placed on the other side. Thank you you creating this video.

@WhiskeyGulf71 10 месяцев назад

Is this a torque converter? I’ve always know this particular transmission to be called a CVT, constant variable transmission. I even own a vehicle with a CVT, it’s a Yamaha XMAX maxi scooter.

@baldeagle242 3 года назад

Fantastic video! Thanks for showing how this goes together and how it works.

@-DIYPRO- 2 года назад

Thanks

@DIYWilly 3 года назад

What happened to the small brass bushing for neutral position? This kit didn’t come with it? I’ve heard of people using copper pipe to make new bushings.

@edwardvaldiviez1137 3 года назад

I fuckin done this 3 × prior to your birth

@-DIYPRO- 2 года назад

Congrats!

@TrailingThroughLife 3 года назад

How do you put the sprocket on the other side? I have the same tav2 30 series knock off and i can't get it to work.

@dyverge Год назад

Have the same question. Assuming you need a different jackshaft but i can't find anything online.

@cembellsteve 6 месяцев назад

Hey, I was wondering if someone makes a manual clutch like that ? Somthing where you can keep in a low ratio. Keep the engine at max RPM . Let out the clutch manually

@NubsWithGuns Год назад

Blackhorse Racing makes the only decent inexpensive ones. I have a 40 that never skips a beat and just got a 30 series from them also. These things need to be perfectly staight and have the belt on the correct way. Not implying the uploader did this, just leaving the advice since that is at least 90% of the time the problem people have.

@vijayvjn6874 3 года назад

Not a torque converter, thats a cvt there isn't any torque converter in this video

@-DIYPRO- 3 года назад

You must be a car guy. Though I agree I wasn't the one who named them. Everyone in the go kart world calls these torque converters.

@daniellemus1382 8 месяцев назад

Torque converter, cvt, transmission etc . Is the same for this

@vijayvjn6874 8 месяцев назад

@@daniellemus1382 No

@jimbrown6431 7 месяцев назад

I'm having trouble finding a torque converter that I can move the chain sprocket to the outside position. Do you have the name of yours and where did you buy it.

@mikelstanger8718 2 года назад

So I got one but I don’t need the sprocket in the back what should I do ??

@-DIYPRO- 2 года назад

How are you transmitting the torque to the axle? Do you have the axle directly connected to the driven pulley? If you don't need it you still install it and just let it spin, won't hurt anything.

@mikelstanger8718 2 года назад

@@-DIYPRO- yeah that’s what I ended up doing it’s turned out just fine thanks for getting back to me

@adriel9354 6 месяцев назад

I have the same torque converter but I have an issue when the belt starts to retract after letting of the throttle the pulley doesn’t seal up all the way and stays slightly open causing the torque converter to not disengage which stall the engine. Do you have any idea what’s causing it.

@LACARRINDANGA 4 года назад

I see you are using a 40 sprocket. I tried too, but chain rubs against the aluminium plate (both sides) could you tell me any tip ? Thanks in advance

@-DIYPRO- 4 года назад

I can't remember which chain it is weather its 40, 41, 401. One of them is really fat and even though it fits on a 40 sprocket it's too wide. I'd looks up the specs on which one you have and the others to see which is thinner.

@Deucealive75 2 года назад

Use a 420 or 41 if you don't want the big fat 40 chain. All will work on that sprocket.

@LACARRINDANGA 2 года назад

@@Deucealive75 thank you

@AndrewStokes1966 Год назад

I just added another washer.

@Sinnnnnnnnnnnnn 9 месяцев назад

I have a yerf dog 3203 and the belt keeps slipping and get stuck in between the driven pully any help

@Revdonlee74 3 года назад

Good afternoon. What size socket is the driven pulley lock nut? Thanks.

@WildfoxFabrication 5 лет назад

you gotta add the bronze bushing under the belt on the driver pulley! you gonna burn that belt pretty quick

@-DIYPRO- 5 лет назад

Actually the 1" shafts don't have the bushing nor the 40 series, in case anyone cared about those too.

@-DIYPRO- 5 лет назад

I thought the same thing and called a bunch of manufactures.

@matthewpayment5224 5 лет назад

Mech Masters may i ask why? I have a 1" and was having issues with the bronze bushing. I removed it and now the belt locks up on the rear drive pulley. Any suggestions?

@WildfoxFabrication 5 лет назад

@@matthewpayment5224 the bronze bushing is to keep the belt from engaging until you want it to. if you dont have it its always going to want to drive

@mikemodjewski6356 2 года назад

So a cvt from a snomobile or atv?

@-DIYPRO- 2 года назад

This one was used on a go kart.

@buyerenogurlfwendo2106 4 месяца назад

How do these achieve a state of neutral. The centrifugal clutch to me make sense but cvt torque converters not so much.

@kevinharris9004 2 года назад

I noticed most belts go onto a brass fitting I got the same one you got but you don’t have a brass fitting mine didn’t come with one do I need one on this product????

@-DIYPRO- 2 года назад

I thought the same thing and did some research. What I found out is the 1" borre do NOT have the brass bushing. Doesn't make sense but the nice comets and these cheap China ones don't come with them when 1" over bigger.

@TheMindBullets 2 года назад

What size nut goes on after the driven pulley? I bought a used Coleman ct200u with a torguq converter but that nut is missing.

@-DIYPRO- 2 года назад

Sorry, sold the cart so I don't have it anymore. You can always measure the diameter and thread count then pick up that size, one bigger and one smaller since I always choose wrong!

@29javii 4 года назад

Hey I am building a go kart my nephews and I would like to ask you a few questions about the troubles I'm going through if that's ok

@alexroy7695 4 года назад

Did you already build one? Or am I too late.

@BruceLyeg 5 лет назад

Excellent video. Nice clear instructions with good video. Thanks!

@Squawkk7600 Год назад

Anybody know what axle he used?

@-DIYPRO- Год назад

Where, on the output side or on the kart?

@Squawkk7600 Год назад

Both trying to fix mine but I just saw this and found out the shaft was cut so sorry

@Steveshappylittletrees 2 года назад

Huh, no torque wrench or anti seize??

@-DIYPRO- 2 года назад

My Dewalt is a calibrated torque wrench!

@Steveshappylittletrees 2 года назад

@@-DIYPRO- - Got it. Impact wrench = Torque wrench🙂

@thebrokeway9838 Год назад

ty for video also you mentioned locating the sprocket on the back sid..do i need a different sprocket as i have pulled my hair out trying to see how please enlighten me

@-DIYPRO- Год назад

You use the same sprocket. When taken off you can slide it through the bore and put it on the back side. Hope that makes sense.

@thebrokeway9838 Год назад

@@-DIYPRO- ty you for replying and yes I have tried this and there is a section that is like a hair thicker in diameter which stops the sprocket from sliding all the way back to the opposite end also the slot is is not machine all the way to the end. Do you have a link or maybe a video or something that shows this please?? I as well as about a million others would be eternally grateful!! Take care Sir and thanks again

@jamesa6272 7 месяцев назад

You didn’t have to use any washers to shim the drive pulley?

@survivalishardstaystorng Год назад

Thanks for making this video and answering the question that I needed placement of the sprocket can I choose both sides awesome

@-DIYPRO- Год назад

Right on, thanks!

@maxamps45 3 года назад

is the belt slipping on low speed? seems pretty loose when on low speed. I notice it the plate is squeezing it when it spin at high speed.

@-DIYPRO- 3 года назад

Yep that is exactly what it does. Slips at low rpm so you can idle and one you hit the gas it engages.

@maxamps45 3 года назад

@@-DIYPRO- oh, okay thanks. so I heard this device function similarly to CVT. do you have to control the throttle to simulate gears on car transmission? say, if I was going uphill?

@joneserupinsmoke9161 2 года назад

Lol damn bro all u had to do is cut the cap lip down halfway

@-DIYPRO- 2 года назад

you can get away with doing that on the predators but this Honda it still interfered.

@joneserupinsmoke9161 2 года назад

Damn really shit ok thanks I still haven't put my predator engine on anything yet .I want to put it on one of the huffy Beach cruiser bikes

@joneserupinsmoke9161 2 года назад

But thanks for info

@Bro_wtl.mp3 2 года назад

My belt doesn’t engage idk why

@-DIYPRO- 2 года назад

Is there any oil or water on the belt. It will just slip if contaminated.

@Bro_wtl.mp3 2 года назад

@@-DIYPRO- nah it’s brand new

@ryanmaile6361 4 года назад

I’m glad to know the sprocket can go on the back side because set up won’t allow for the normal way. My question is, will the pulleys not be aligned when the sprocket is on the back causing the belt to wear quickly?

@-DIYPRO- 4 года назад

It will still be aligned. You'll be good.

@212mafia-jernigan6 4 года назад

There's no keyway on back portion of the Jack shaft so the gear can't go on back side. The keyway only cut to fit from the backing plate to the threads.

@-DIYPRO- 4 года назад

@@212mafia-jernigan6 can you flip the shaft to the other side? I don't have mine anymore but I know mine when on both sides.

@H4WZE 2 года назад

The belt on my torque converter keeps ripping. Ill try this out and see if this works. Thanks!

@-DIYPRO- 2 года назад

Let us know how it turned out and if it helped.

@RC_Trailblazers 4 года назад

You have missed the most important part. The brass collar that goes over the engine shaft pulley, so when you're idling the belt isn't wearing on the spinning pulley, The brass collar that goes over it actually keeps the belt and brass collar from spinning until you give it throttle.

@-DIYPRO- 4 года назад

I thought the same thing but the 1" shaft and 40 series I guess don't have them.

@RC_Trailblazers 4 года назад

@@-DIYPRO- that sucks, Yeah that is the important part. I would definitely go out and try to find a collar big enough to fit loosely over that so you don't wear a spot in your belt at idle. This is good information though. I'll keep this in mind if I ever decide to pull the trigger on a 40

@christianesser2132 2 года назад

I installed one of these on my predator 212cc and when I drive in the dirt it doesn’t drive even though I’m pressing the gas pedal all the way down it just stops. Why is that?

@-DIYPRO- 2 года назад

Dirt, says it all right there. These aren't that great when dirty, oily, or wet.

@christianesser2132 2 года назад

@@-DIYPRO- I figured it out, the belt wasn’t engaging because I didn’t have a part of the torque converter on right. I will keep that in mind though thank you!

@jayl4565 4 года назад

This looks more like a continuously variable transmission than a torque converter, but it’s interesting to see it on an engine as small as this! It would make a killer go kart installation.

@DWinnie67 4 года назад

cvt/torque converter = same thing

@vijayvjn6874 3 года назад

@@DWinnie67 its not the same thing, cvt can come with clutches as well instead of a torque converter

@johns3655 3 года назад

@@vijayvjn6874 true, a cvt can serve as a safe idle clutch

@vijayvjn6874 3 года назад

@@johns3655 i didn't mean the forward clutch that new cvt have that are used to disconnect the torque converter at idle or a stop, there is nothing stopping cvt to have traditional clutches instead of a torque converter, calling an apple a red orange just because it fits your mental model of how something ought to work doesn't make it so

@jayl4565 10 месяцев назад

@auntysocialist I was on the Baja SAE Team at my university, and even there, we called it a CVT. We even had one person on the specializing in CVT tuning!

@TheMiraldi 2 года назад

Ya isn't that just a cvt?

@-DIYPRO- 2 года назад

Pretty much.

@walterschilling4512 Год назад

Bought a new 40 series clutch and driven clutch, in which I mounted onto a tav gearbox , I needed to change to a reverse spring on the driven clutch ,I had a hell of a time getting it apart after I removed the spring clip.I noticed that the bores were a little rough ,and the parts were sticking on the shaft, so I took 180 sandpaper and cleaned it up .Now all the parts slide along the shaft freely ,I'm running a 14hp subaru engine.

@-DIYPRO- Год назад

Right on.

@geoffcowley8826 Год назад

according too the instuction the keyway washer goes on the outside of the gear not the inside!! but I'm am learnig with you !! Thankyou

@-DIYPRO- Год назад

Right on!

@skullbonesilluminati245 3 года назад

Where can I get a torque converter for a 16 hp engine. 1 3/4 shaft

@-DIYPRO- 2 года назад

You'll need to look more for a CVT that they put on snowmobiles.

@ricomoore5704 4 года назад

Can the torque converter be installed with the driven side on the front so you don't have to hog out the converter to fit?

@LunchboxStudios Год назад

Yes.

@expressionyourlife5203 Год назад

What things should be considered in torque converter maintenance?

@-DIYPRO- Год назад

If you are carful you can ad a drop of oil to the spring but most people put too much and it gets on the pulleys, just slips after that. I suggest nothing.

@budipj 3 года назад

I think this is not torque converter, this is a CVT...

@-DIYPRO- 2 года назад

I didn't name it but it's what they call them in the go kart world. Google search go kart torque converter!

@AndrewStokes1966 Год назад

I just rotated mine to the next 4 holes so I didn't have to cut any of the casing away. I did have to raise my motor mount, which took some time with cutting and welding. I'm pretty sure your idea would be quicker, though.

@-DIYPRO- Год назад

Hey if it works, right!

@olivertaylor8788 3 года назад

Very good vidio.

@-DIYPRO- 2 года назад

Thanks

@shampoo1991 Год назад

Did you not have to touque the bolts attaching to the engine?

@bodhranlowd 2 года назад

You can avoid grinding if you raise the engine by putting 1” risers underneath.

@-DIYPRO- 2 года назад

The interference was with the engine oil fill.

@bodhranlowd 2 года назад

@@-DIYPRO- yes if you raise the base you can rotate the CVT plate to avoid the engine. I have done that to multiple mini bikes and go karts. In the case of some mini bikes you might need to remove the stock gas tank which provides a perfect excuse to install a real motorcycle gas tank that looks way better.

@-DIYPRO- 2 года назад

@@bodhranlowd I see what you are saying. I'll have to try that next time.

@authentic4225 2 года назад

What does this do exactly? Keep the engine spinning while coming to a full stop?

@-DIYPRO- 2 года назад

Exactly, it allows the karts to be stopped and the engine to still ideal.

@authentic4225 2 года назад

@@-DIYPRO- Probably so the engine does burn itself out? Wonder if these are needed on the electric motors?

@TheChiefJudgeDredd 2 года назад

Is the key washer between the plate and sprocket absolutely necessary?

@-DIYPRO- 2 года назад

Absolutely, probably not. Is there a reason why you don't want to put it on?

@TheChiefJudgeDredd 2 года назад

My chain rubs the pulley, or whatever you want to call it, so, instead of placing the key washer between the plate and sprocket, I have placed two washers on the left side of the sprocket and the pulley, moving the sprocket and chain to the right just enough to clear the pulley, but someone told me if I don’t use the key washer on the right. It’ll destroy the bearing.

@shaunthompson1935 3 года назад

Whats the difference in hp with a clutch and torque converter. Faster take off or more high end?

@-DIYPRO- 3 года назад

These you get more low end torque. You can always switch sprockets around for what you're looking for. For example you could put this on a Go-Kart with a smaller count tooth sprocket on your axle and I would give you the low-end torque to get up and go and higher speed.

@EvrttGrn 3 года назад

TY for this vid. Did yours not come with a brass bushing to go under the belt on the driver? I've read that it will help the longevity of the belt.

@-DIYPRO- 3 года назад

I did a bit of research because I thought mine was missing but it turns out that on the 1" shafts they don't have them. Even thought this isn't a comet I called them and asked if their 1" shafts come with them and theirs don't as well. Don't understand it because you'd think it is almost a necessity.

@davidgentz1731 6 месяцев назад

We used to call them centrifugal clutches

@devidyevan8304 4 года назад

How do I find the same torque converter because I want one for my gx390 but I’m scared that the shaft size is to big so it won’t fit

@heavystarch100 4 года назад

EBAY

@jayjkayhouseofharleys3151 5 лет назад

WATCHED IT AND LEFT YOU LIKE NUMBER ONE !

@TheBracket1 2 года назад

At a idle the belt is spinning, does this mean it would drive to go cart forward even at idle?

@-DIYPRO- 2 года назад

Is the engine on a kart already? Sometimes when it's not installed it will still spin. If installed on a kart then yes if the belt is spinning then the kart will move forward. First thing I would do is turn down the idling rpm.

@TheBracket1 2 года назад

@@-DIYPRO- yes its on the go kart.. is there something that let's the clutch free spin? Or does the belt slip over the pulleys at idle? I'm guessing the pulley on the engine has to turn when the engine turns.. just confused on how the belt doesn't try to spin all the time making the cart move if the belt is spinning

@-DIYPRO- 2 года назад

Sometimes if there is no load on the engine (like the wheels are up off the ground then it can do exactly what is shown in the videos but as soon as you put it on the ground then yes the pull will free spin until the rpms get higher. Yes sometimes the belt will spin as well but it will not have the force to engage the driven pulley. You can test it out by rolling the kart over to tree or something stationary. Try starting there, that will stop it from taking off in the event of it engaging while just at idle.

@michaelstewart2479 3 года назад

With a 40 chain you'll need to modify it by removing the bottom we ear off the back plate

@-DIYPRO- 2 года назад

Good to know.

@markpc1893 Год назад

Thanks

@-DIYPRO- Год назад

No, thank you!

@markpc1893 Год назад

Thanks

@-DIYPRO- Год назад

Thank you!

@МихаилХарлап-г6н 3 года назад

где такое купить ? очень надо.😴

@24R03ma 3 года назад

Да хороший комплект

@VictorGabriel-by7iu 3 года назад

@-DIYPRO- 2 года назад

Yes

@jacobreagan1244 3 года назад

Very nice video! Clear picture and audio. Installing my torque converter next week. Thank you!

@-DIYPRO- 3 года назад

Have fun!

@jorgemedina3732 4 года назад

Is there a way you could tell me the distance between the two pulleys? From center of engine crankshaft to center of the Jack shaft ?

@-DIYPRO- 4 года назад

Sorry someone else will have to chime in if they have a 1 in bore size because this engine I'd put on a go-kart and don't have it anymore.

@zackcoogan480 3 года назад

Is there a easy way to trouble shoot it not opening up for the second “speed”

@ChrisHillASMR 3 года назад

Motor not powerful enough for the application. AKA ur too fat or ur buggy/vech is too fat. Or you bought the series 40 converter meant for higher power small motors 8hp+

@kicks_one_eight Год назад

What series belt is that

@-DIYPRO- Год назад

Similar to the comet 40 series.

@ЕвгенийРаськин Год назад

669 полуклиновой

@gavinredd1015 4 года назад

now how do you connect to kart

@lcm_creations Год назад

Hello, im currently trying to make a go kart with a Briggs And Stratton engine. But the problem is that whenever i start it, it runs immediately, which its supposed to do. I want something that whenever i turn it on, it won't go until i press the gas. Is this what i need?

@-coolerlegothings-9784 8 месяцев назад

Yes, the torque converter is idle until the engine reaches a certain RPM. It depends on the torque converter and engine though. The engine will idle under the needed RPM until you hit the throttle.

@lcm_creations 8 месяцев назад

@@-coolerlegothings-9784 Thanks, I ended up buying it. But it didn't fit my engine because of the gear box on it. I bought the centrifugal clutch instead, and it seems to work like I want!

@kmart014 4 года назад

What gearing do i need for optimal speed and torque with a torque converter?

@Deucealive75 4 года назад

That's a good question because gearing is so important. But no one will know how to answer without knowing what tire size you are running. How tall is the tire? Mini bike or go kart?

@felipeluizfelten 4 года назад

@@Deucealive75 in a go kart with 200 cc and 6,5 cv, what do you recomend ?

@Deucealive75 4 года назад

@@felipeluizfelten How tall is the tire? The tire size is important if someone were to make a decent guess where to start on their gearing. To find how tall the tire is you have to look at the tire and find the largest number of the three numbers there. Or measure the diameter with a measuring tape.

@felipeluizfelten 4 года назад

@@Deucealive75 the size is 22/10/8

@Deucealive75 4 года назад

@@felipeluizfelten With a torque converter I would start at no less than 7/1 gearing. Be sure to get more opinions on this from others with go karts.

@georgemaze7926 4 года назад

Thanks for making this video, please make more.

@Kaotek 4 года назад

Once the chain is hooked to the sprocket what keeps the bike from going into motion? It appears that the belt is always spinning the sprocket even at idle.

@-DIYPRO- 4 года назад

When there is weight on the machine the belt spins on the pulley until reved up.

@ChrisHillASMR 3 года назад

As the output shaft spins, it engages a clutch in the driver spindle at a certain RPM, if under a minimum RPM (Idling) it wont engage the driven pully (the back spindle the belt drives which is also attached to the chain sprocket and wheel)

@samsgarage1716 4 года назад

Good video.why do I go through so many belts?

@johnmoore333 3 года назад

I had a belt driven motor cycle and the swing arm got bent a little not something you could see but eventually it caused my belt to break maybe something is not lined up right or slightly bent

@serralvo26 6 месяцев назад

Very nice!!! Do you know what gear ratio range this torque converter has? Thank you.

@devonmcdonald23 9 месяцев назад

What’s the sizing on the belt??

@timothymichaud2442 Год назад

I would like to know exactly what torque converter that is . In my application I need to put the 12 tooth sprocket out behind the engine where u said it could b placed