We Bought the Cheapest 10HP Diesel on Temu and Put it On a Go Kart (it Rips!!)

Подписаться 1,2 млн

Просмотров 628 тыс.

50% 1

Go to partners.connecteam.com/carsa... to make the most of your business today! Brought to you by Connecteam.
Go Power Sports parts used in today's video:
Bolt together go kart: bit.ly/3W15tZm
1" bore clutch: bit.ly/3XX7CI3
New Go or Blow merch!
Tee: cars-cameras.com/products/go-...
Sticker: cars-cameras.com/products/go-...
Tank top: cars-cameras.com/products/go-...
Use code "carsandcameras" at checkout at langmuirsystems.com for $100 off your crossfire pro plasma table!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Авто/Мото

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,8 тыс.

@CarsandCameras 23 дня назад

Go to partners.connecteam.com/carsandcameras to make the most of your business today! Brought to you by Connecteam.

@RockenTravis 23 дня назад

Now to get a cheap temu turbo for ir

@dbomber69 23 дня назад

It needs bigger rear tires. Diesel has the torque needed to rotate a larger wheel.

@axialpad99 23 дня назад

@@dbomber69 Agreed, they could get more speed out of that thing for sure

@jasonkaelin2337 23 дня назад

Sorry if I missed some episodes but what happened to Charles??

@bodine2537 23 дня назад

@@jasonkaelin2337he’s still there every once in a while but not every episode anymore right now, think he had to move back closer to his parents for a new job an it’s too far to drive back an make episodes every week , haven’t seen him in bout a month or so though as of right now but he left the every week show about 6 months ago

@jde88de 23 дня назад

The reason it finally ran is because you cracked the line open, its extremely hard for single cylinder diesel engines to bleed themselves.

@dozer8065 23 дня назад

agreed, and maybe the fuel that was in it was a type of "shipping" super low quality just used to lubricate for shipping purposes, draining the fuel, changing fuel, and popping that line got all the good fuel in and bled the system.

@StroDshiesty1 23 дня назад

@@dozer8065exactly i feel like it was oil to keep it from rusting during storage/shipping

@cs-gj3yf 23 дня назад

@@StroDshiesty1 theres nothing to rust, especially the injection pump parts its all extremely high grade stainless, almost indestructible, its just lube for the tight tolerance stuff, keep in mind the plungers inside that pump have tolerances that are less than a thousanths of a inch

@masjuggalo 23 дня назад

But I assume they mostly bleed like old mechanical injected truck diesels (pickup trucks) like when someone runs their 12 valve out of fuel just there's only one cylinder so there's no hope of one of six getting some fuel and making the engine spin over on its own

@masjuggalo 23 дня назад

@@dozer8065to be fair, diesel fuel is probably the lowest quality stuff you really can get for an engine designed to run on peanut oil

@polishcynic 19 дней назад

The moment you put a turbo to this gokart its gonna be everyones east european dream gokart, just imagine "The TDI Gokart" lmao. 😂🙌

@WyFoster 19 дней назад

It's going to happen. Parts are on the way

@Basedforlyfe 14 дней назад

😂

@felikswielkopolan4001 6 дней назад

prawda!

@twocvbloke 23 дня назад

When it comes to diesel engines, it ain't the horses, it's the torque that sends it, even with that swiss cheese flywheel... :P

@grannysgushinggash 19 дней назад

yes there's no horses in a diesel engine it contains pistons

@jacobkennedy6820 16 дней назад

@@grannysgushinggash i dont think you could even fit an entire horse in an engine.

@sabero5668 16 дней назад

@@jacobkennedy6820 Then you don't have a big enough engine. Or a small enough horse I guess

@bustinnucks1299 14 дней назад

Torque In motion is horsepower. What your feeling is horsepower being made sooner.

@grannysgushinggash 13 дней назад

@@jacobkennedy6820 you can if you mince it first

@singlecproductions9653 22 дня назад

Ive had 4 of those. Remove some of the shims between the little injection pump and the block. It'll give it a few more hp and more smoke.

@Failure_Is_An_Option 18 дней назад

For zero benefit.

@proxyhx2075 18 дней назад

@@Failure_Is_An_Option Are you literate?

@davidanderson7720 16 дней назад

@@Failure_Is_An_Optiondiesels work different than gas engines. More fuel=more power😂

@juliogonzo2718 15 дней назад

@@proxyhx2075it'll blow up if you mess with the timing too much, and definitely will shorten it's life running it advanced more than stock

@killzone9810 14 дней назад

Are you stupid?!@@Failure_Is_An_Option

@livelaughlovelife1830 23 дня назад

Lol it needs a little tractor exhaust flapper

@ghomerhust 23 дня назад

THIS

@IndianaDipper194 23 дня назад

PLEASEEE 🤣🤣

@christianfolkner 22 дня назад

like the first one!

@qoph1988 21 день назад

Incredibly important. I wish I had a diesel dirt bike with the exhaust flapper thingy

@wewya. 21 день назад

or make a mock big rig exhaust

@johnathantaylor2059 23 дня назад

“This thing is junk…..HEY WE HAVEN’T EVEN HEARD IT START YET…….Exactly” 😂😂❤ love you guys

@jasonbirch1182 23 дня назад

Also, dont piss all your money away on brake clean. Buy a gallon of acetone for 20$. Get a squirt bottle and blast it off with compressed air. 8-11 cans of brake clean in a gallon.

@WyFoster 23 дня назад

And it's the same stuff lol

@michaelince910 5 дней назад

Thanks for the information!

@sagenbabin8786 22 дня назад

Bruh that got me so good I was like holy moly she booking it then at the bottom of the screen “She made me play the footage back at 2x speed to make it look fast”. Yall are so cute it warms my heart

@f-the-wef 23 дня назад

Diagnosing a brand new engine like they found it in a junk yard is hilarious

@bradkenyon1643 23 дня назад

True but that's temu. Could be wish😢

@bradkenyon1643 23 дня назад

Is wish still a thing?

@tommylucatiel7911 23 дня назад

They are the same thing @@bradkenyon1643

@crunchyfrog555 21 день назад

Sign of Chinese cha bu duo construction. Sadly very typical.

@Halfstep2024 21 день назад

One man’s communist utopia is another man’s junkyard I guess 😂

@WyFoster 23 дня назад

Love how my starter box can start a 420cc diesel but struggles with a small block Tillotson methanol engine 😂

@z1berzerker 23 дня назад

Its fighting the spark advance, not the compression 🤔😉... Tilly Meth builds are Bad A55 🎉🎉

@RobertJeffersonBased 23 дня назад

@@z1berzerker Electronic ignition would be a great upgrades for a lot of minibikes

@justinarseneau4450 23 дня назад

Whats the difference ? Arent they already electric ignition?@@RobertJeffersonBased

@marzsit9833 23 дня назад

@@justinarseneau4450 the difference is that spark timing on a small engine with a magneto is fixed, with no advance or retard possible while the engine is running. a battery powered coil ignition system can have adjustable advance, just like car engines have.

@justinarseneau4450 23 дня назад

@@marzsit9833 oh ok thanks for the info

@user-pf6sn8rd2l 21 день назад

Diesels are all about the torque. The weight holds you into the curve, and the torque pulls you out. I concur; probably not a great track machine, but perfect for that Grand Prix woods course!

@groenekever 23 дня назад

Got same diesel engine from ali on my boat running now 5th year. Always starting… got electric starter. So engine, gear/prop/outboard unit, electric starter for 500euro shipped

@ThirstyFoe00 23 дня назад

This build needs a custom homemade transmotion like a 3 speed trans "crawlin, crusin, racin". Yall could do it for sure 😂🤟

@zAvAvAz 16 дней назад

Yeah imagine an even gear spread for 90 mph!

@sabero5668 16 дней назад

@@zAvAvAz With a turbo, more fuel and proper gearing for it, maybe it could get there. More importantly, would you want to ride that cart at 90mph? Answering "yes" could win you the "Biggest Balls Of 2024" award.

@marco3392 9 дней назад

@@sabero5668more likely a Darwin award lmao

@jdogdiesel7242 23 дня назад

Now, For Some Free Mods!!! - advance injector timing a few degrees by removing 1 or 2 shims under the unit pump , turn fuel up also easy since its just an adjustment no parts swap, an ditch that stock air filter for somthing bigger and more free flowing that I'm sure you have layin around the shop, Then Bam MOARRRR POWAHH!!! And yes Turbo would be a good addition , makes it easier since that engine has a pressurized oiling system too

@DarkAttack14 21 день назад

Turning up fuel without adding air is a bad plan... EGTs up for minimal power increase. Advancing the timing would be a good plan though.. He already has smoke so more fuel is not going to do much

@servicetrucker5564 20 дней назад

@@DarkAttack14 High EGTs on a NA diesel aren’t a problem. The old trucks with 200 hp had flames coming out the stacks and manifolds glowing

@TestECull 19 дней назад

@@DarkAttack14 Being able to easily turn up the fuel like that is going to be the difference between the turbo simply cleaning the exhaust up and the turbo actually making the engine more powerful. If they want any gains from the turbo they need to be able to turn the fuel up. As long as they don't mess with the governed speed setting it should wake up pretty good with some boost.

@zocka64 19 дней назад

@@DarkAttack14 On an NA diesel its tested to get more Power at Rich Mixture(even under Lambda 1/aka really smokey), since you are air limited, EGTs also arent a Problem und NA conditions. Adding air through a turbo would be the best addition for the extra fuel tho

@Failure_Is_An_Option 18 дней назад

Timing advance may be of a very slight advantage. Increased fuel... pissin in the wind. Air filter... pissin in the wind.

@EdStonesy 23 дня назад

Can’t believe you got the original Goose from top gun to help out

@sawyerbennett8227 23 дня назад

I was cracking up at around 1:12:30. John looked like he was on another planet or something 🤣

@MultiKelly85 23 дня назад

Your girl did awesome! Re watch the video and watch how she relaxed her brake foot. She had it flat out on the gas pedal. Glad to see you two enjoy go karts. Next she has to help build her own.

@geetar82 23 дня назад

Yall need to have a hot lap day where you re-run all the board leaders!! That would be an awesome episode!!! Cheers guys and love the vids!!!

@johnnagel9907 23 дня назад

If I was building a diesel kart I would definitely go with a torque converter. Keeping the rpms in the peak power curve. I'd probably gear on the high side so when the converter went to full lock up my final drive would be set for top end. I'd want the engine to top out at the end of the longest straight away.

@richardsteele6776 23 дня назад

The mix of colors reminds me of the Partridge Family bus from the 70s. Need a flipper on the exhaust pipe. John it was nice of you to introduce your girlfriend. You two make a great couple.

@extremecheddarswityomom 23 дня назад

She dont need to be shy, we are here to support and enjoy go carts, mini bikes etc. Its issac we're here to judge and talk about... Them sideburnz... Lol Love em. 😄

@user-bb5lm8sg8w 11 дней назад

And let not get started on his poocha shell necklace,

@ROFLCOPTERS92 23 дня назад

I have this same engine I cobbled on to an ariens 28 inch snow blower frame. The power output is super good. I've put it in to foot deep wet heavy slush and it loved it. It was barely even taking a load and it was LAUNCHING that stuff.

@ryaninwa5375 23 дня назад

This was such an enjoyable episode to watch. It had everything in it. Some build, some fix, some vlog, redheads, and you had fun most of the time 😅

@Creed9230 23 дня назад

No one talking about how the Diesel engine sounds like a lions roar when he lets off the gas at 1:10:48 Love the sound lol

@drgti16v 23 дня назад

John going to his roots with the music during the painting montage.

@roi375 3 дня назад

great video! thank man! had Conencteam in my last job and it was SO EASY to track out shifts. loved it.

@koaasst 11 дней назад

tell ya what, this was in my feed, and it was right up my alley. great content, great shop, great personalities. makes me wish i had friends lol! well ones that were into this kinda fun. see ya on future videos ill be watching.

@derbydriver7431 23 дня назад

I almost feel like I'm watching an episode of Diesel Creek....lol

@aronfaine9457 20 дней назад

Matt would be stoked to see this lmao

@keystoneangler3217 23 дня назад

Lol. I have that same motor on a mini bike. With 40 converter. I call it the D-69 cat lol. It's all done up to look like a cat machine.

@bicbuilds 23 дня назад

i need to see this

@humpday2267 23 дня назад

We wanna see this sounds like a cool build man

@ExtraFungus 23 дня назад

Pin this please! Blue locktite comes in a tube/glue stick/paste. If you have any little ones, glove them up and have them apply it to all the bolts in the kit. If you don't have little ones, the paste still makes it easy and less messy. I haven't built one of these carts but harbor freight trailers are built with nuts and bolts, that's exactly what I did with my son, we poured outs all the hardware, put blue locktite on it and sorted them, it was a great first step in the project and it's a good first "wrenching" project with my son.

@Alkatross 18 дней назад

Ah, you fell for the ol' flywheel scam. Happens to the best of us.

@lensrc7460 23 дня назад

Ya'll need a set of holes on that bench to bolt down engines. Tapped so no reaching your hand under the table.

@drinkmorecocacola 23 дня назад

A “universal” plate to mount on would be a cool upgrade to the shop. I LOVE upgrade videos

@dickkallerhan2412 21 день назад

one would be a start 😆

@alexmikhael5061 21 день назад

I was thinkin a c clamp kinda thing with X pattern for the 4 bolts, and the clamp fastns down on the ''table'' or into a vise even but ''designed'' to set into the jig table thingie and watnot ;)

@freedomisntfree_44 20 дней назад

Good idea 🤙

@ClintonRyanThompson 23 дня назад

So happy to see home much you guys have grown the channel over the years!! Keep up the great work!

@EdStonesy 23 дня назад

These long form videos are impeccable 👌 I love having you dude on in my workshop. Great job on the diesel boys!

@RueKake 19 дней назад

Temu.. Giving the Chinese continuous American comedy since 2022

@CarsandCameras 23 дня назад

Now this is a sweet platform!

@Jockymcbock 23 дня назад

Was just looking at some diesel engines! Excited!

@mathieulachance151 23 дня назад

Absolutely!!

@mathieulachance151 23 дня назад

It reminds me of the small diesel powered go kart you guys built a while ago with the engine from EBay !! Loved that video

@DuDieselDude 23 дня назад

@@mathieulachance151lol they said that in the video

@wyattflanders8459 23 дня назад

Now it’s time to super or turbo charge it

@bigbird6788 23 дня назад

Love the long form videos! We asked, you delivered thanks from all of us detail orientated fans

@goosenotmaverick1156 22 дня назад

I have a hard time finding enough time to sit down and watch an entire movie though. Personally I liked the 30 ish minute range, longer than 15-20, but not nearing feature film length

@patrickbennett9120 22 дня назад

I was a TIG welder for 3 years... it is so much better than MIG... it just takes some reps to learn how much heat to use and building muscle memory with adding the rod... and you can weld any material with TIG. I was primarily an aluminum welder and TIG is the way to go... anyway enjoy... in a few months you will have the hang of it.

@bvick420 23 дня назад

the small hex plug on the bottom right of the side cover is an oil feed. the exhaust flange is close enough to a predator 420 that an off the shelf flange fits. i turboed mine with a vz21.

@K-Rivs 18 дней назад

Where'd you buy the motor from?

@T3NNESSEE 23 дня назад

Id say going 1-2 teeth bigger on the clutch would improve the top speed by a lot. 1 tooth on the clutch makes up for 8 teeth on the rear. A Turbo and a good porting job would improve the hp and torque by alot.

@aidanlyons1155 23 дня назад

how many teeth on that clutch sprocket, did you manage to see by chance?

@T3NNESSEE 23 дня назад

@@aidanlyons1155 Just taking a guess id say 14-15 if its a 1 inch shaft engine.

@therealracer135 21 день назад

I mean, they did say it's already sketchy enough in the corners, adding speed probably isn't going to help much, at least not on their track.

@lifehealth489 19 дней назад

@@aidanlyons1155 bobby dont miss anything

@MikeSmith-bb5ii 23 дня назад

Worst tig weld is the one you didnt try. I was blessed to have my entire apprenticeship in tig doing stainless food and beverage equipment 29 years ago. MIG = Monkey Ignorant Gun. Any monkey can do it, and some do it well, but tig is an art.

@bigpipol 22 дня назад

amen ma man

@derrickmanning2597 19 дней назад

Over here in UK us stick welders call migs hot glue guns! I've done thin sheet and even motorcycle headers with stick,done heavy work too (RSJ'S)and cast iron! most of that is an art as well!

@xxbambamxx7261 17 дней назад

I've heard some of these engines have sat in a dirt turner for over 6 years, with little to non maintenance at all, still starts and runs like a champ

@rockforehead3022 23 дня назад

Friends don't let friends TEMU... you're just asking for it.

@jvsyoutube3298 23 дня назад

yeah, good to get a tig! you guys need one, and when you are good at it you can take the tig home and do welding at the tv room table. So much less dramatic with splatter and stuff then a mig!

@wilmesz1992 23 дня назад

You guys will love the arccaptain welder. I've been running mine since the beginning of the year on aluminum, SS, steel, and bronze filler and it is a very capable machine! Hint, you guys really need to get the foot pedal, the control it gives you makes the difference between mediocre and great looking welds especially on thin material!

@michaelbenoit248 21 день назад

Y’all should get a flywheel from an L100 Yanmar because they are the same exact engine.

@unidude-lx3kp 23 дня назад

I apsolutly died of laughter when I saw the comment about doubling her playback speed

@nihildegrasse1700 23 дня назад

Uh, did they know about depressure knob?(the little red knob thingy, top of the cylinder head, beside the injector. No wonder the starter are just shredded to pieces 😂😂😂

@lensrc7460 23 дня назад

yes, they knew about it

@nihildegrasse1700 23 дня назад

@@lensrc7460 I think they should use the knob to disable the compression, thus make it easier to gain more rotation momentum. After enough momentum gained, just let go of the knob and the engine will do the rest. That's how we start some Chinese diesel engine here. Those Chinese really go low with that starter tho.

@lensrc7460 23 дня назад

@@nihildegrasse1700 They were. Watch again. They even talked about it.

@GuitarRek_Films 22 дня назад

@@nihildegrasse1700they did the starter was just that shitty that it still broke

@methamphetasaur День назад

I used to was an tank mechanic, and there was a diesel generator on the top of the tanks, and the tankers would break the pull starts on those things as quick as you guys did... all the time 😂

@greenwizard2000 22 дня назад

I love TIG welding... can be so satisfying once the learning curve realy hits

@cayminlast 23 дня назад

Once you git the hang of it, TIG Welding is awesome, I actually prefer TIG over MIG for certain jobs where the join will be visible.

@waxore1142 23 дня назад

diesel has a forever shelf life

@juliogonzo2718 15 дней назад

They've mandated summer fuel where I am to be B5 biodiesel now. It's more prone to bacterial growth imo. My old job had a truck sit for about a year and the fuel went bad. Another truck sat for 3 years and it didn't because it was before they put that crap in the fuel.

@waxore1142 14 дней назад

@@juliogonzo2718 you can drain it and run it through a hard filter and remove just about anything

@DeltaOGaming 14 дней назад

@@juliogonzo2718biodiesel is sh**

@chucksmalfus9623 День назад

Drove 18 wheelers in the 70s when fuel was like 30cents a gallon, always had to put an additive in it to keep the groth down or it would turn like jelly.

@waxore1142 21 час назад

@@chucksmalfus9623 i have seen 30 year old diesel fire up. only time i have ever seen diesel turn into jelly is when its too cold.

@jamesoverstreet35 20 дней назад

Guy's the Diesel go-cart is an Awesome build & i Look forward to you guys adding a Turbo to the build !!! I Really think it would be an Amazing project because it would open up possibilities for folks like myself as I have several diesel small engines that I have acquired from auctions & trades over the past few years !! I build go cart's, buggy's, Side by sides etc..... & have been looking for a Tried/Tested & True setup for a Turbo Diesel small engine combo that's solid & not a "Break the Bank" investment !!!!! I Simply LOVE your Videos & how you guy's are able to include all of the content that makes my builds so much Easier as well as much more inexpensive !! PLEASE keep the builds coming as I watch Every Video you guys post atleast a half dozen times per video as a reference or to introduce friends & Family to your informative & just Downright Wholesome HILLARIOUS "Spot On" Builds !!!! Love you Guy's!!

@chopfather2730 22 дня назад

Can we get a camouflage short sponsorship???

@ur_quainmaster7901 23 дня назад

Before things get crazy with mods, I'd love to see a little torch shooting propane into the intake via "nitrous" button.

@WyFoster 23 дня назад

You're speaking my language brother

@lamarzimmermanmennonitefar5269 23 дня назад

That would actually help.

@gorillaau 23 дня назад

@@lamarzimmermanmennonitefar5269It's not goimg to hurt anything of value.

@cs-gj3yf 23 дня назад

nobody uses propane for a reason, nitrous is better.

@jasonbirch1182 23 дня назад

@@cs-gj3yfwrong. Nitrous is extra air, propane is fuel. A diesel makes power with timed fuel injection and the correct amount of air. If it's making black smoke then you need more are, if it's not you need more fuel. Adding nitrous to a diesel making no black smoke is going to get you little/nothing. Adding propane is untimed fuel for when you can't get any more from the injection pump. It helps spool the turbo earlier too. I have a propane Injection system I built on my diesel Mercedes I tow with.

@bentleeohlsen4542 23 дня назад

i would love to see you put a turbo or even a supercharger on this machine

@GoPowerSports 22 дня назад

Love the color scheme on the Bolt Go-Kart.

@Sciggrumps 23 дня назад

Thanks guys for doing this experiment, I’ve been wanting to do something like this with a couple buddies, but from what I’ve gathered they’re better as a boat anchor than an actual useable engine

@WyFoster 23 дня назад

Rolling coal patrol!! 🔥 💨

@paulforrester4057 23 дня назад

Loads of torque I bet

@MathewMcCormack2567 21 день назад

Thanks for the sweat tea shim idea! I literally have this same issue with a chonda gx420!

@shtopfl5247 23 дня назад

Must have been two years since I watched the last video from you guys 😄 I’ve got a ton to watch 🙈

@livelaughlovelife1830 23 дня назад

Lol looks like the Will Smith's jacket in the Prince of Bel-Air

@Bama3728 23 дня назад

Or the Partridge Family bus.

@g0ldensample21 23 дня назад

Your buddy needs to be part of the channel. He's already super comfortable with the camera 🙂

@bicbuilds 23 дня назад

He has his own channel thats why hes so comfortable lol

@g0ldensample21 23 дня назад

@@bicbuilds 🤣👍. I did not know that. I'll have to go check him out. What's his channel name?

@jumpercabledadz 23 дня назад

@@g0ldensample21JumperCableDadz

@Apr0x1m0 23 дня назад

IMO its the extra torque from the bigger displacement helping on the long uphill. The 98 almost died going up there.

@swedebug2889 23 дня назад

Epic paint-job on that bolt-cart! 👍👍👍

@johnbchambers1442 23 дня назад

Ya know, your other diesel from YEARS ago came with a broken flywheel as well! Had a single fin broken off!

@ne634 23 дня назад

Wheres Charles? Ima ask this on every video until I get a answer.lol

@CLPRPSD 23 дня назад

Search “ Did Charles from Cars and cameras leave”. I believe there is a video of a podcast with announcement?

@scubasteve3293 23 дня назад

I'm doing the same thing. I feel like there was a fall out.

@CLPRPSD 23 дня назад

@@scubasteve3293 it seems that it’s time for change. Hoonigan iis now crap after it imploded due to corporate nonsense, Donut media has everyone jumping ship, Grindhard Plumbing lost a guy and now this. Change happens, sometimes it’s for the best, but not always

@scubasteve3293 23 дня назад

There is i just found it, I'm glad he left on a good note, I'm going to miss that guy.

@ne634 23 дня назад

Yep I found it.. didn't know they have a podcast

@coltondyche554 22 дня назад

Thank you for talking about the bump it just might save me money and all lot of work

@VintageCR 19 дней назад

just to recap; diesel generator, mounted on a 'put-it-together' go-kart is awsome! and that's cutting it short still haha that thing is a monster!

@jamesbelcher5082 23 дня назад

Quit lying you didn’t pay $3500 for that motor you using

@TheCowboyfromhell87 23 дня назад

They said $415. What are you on about?

@shaynegadsden 22 дня назад

Yep 0:50 $415 so no idea where you got $3500 from

@JoshKilen 19 дней назад

@@shaynegadsden they are a chinese clone of a yanmar. the Yanmars are $3500

@shaynegadsden 19 дней назад

@@JoshKilen even if true i'll assume you are what does that have to do with anything. They know nothing about the motor explained how they picked it and what the price was so still $3500 wasn't mentioned and sounds like OP didn't pay attention and just made up their own backstory

@tihzho 21 день назад

I didn't know Will Ferrell built go-carts! Go Ricky Bobby! "If you're not first you're last"!

@AngelaWest-if5ko 13 дней назад

I never thought that there would ever be a diesel small engine but they’ve been around for YEARS! It’s crazy how far technology has come in just the last ten or twenty years.

@MaLiXs88 22 дня назад

Diesel gate is a really good name for it 😂

@dennisnorth1250 23 дня назад

Another great vid guys...Guess the torque of a diesel and weight over the drive wheels = Traction could be a factor...just plain ol brute force....love it

@rocketranger21531h 23 дня назад

Please do much more content with this setup. It is so awesome. ❤

@bwood282 19 дней назад

I bought this same engine for my snow blower and it works really good. I dealt with some small issues finding the right belt size but once I got that dialed in it’s strong as a bull!

@snowcow1173 18 дней назад

Just wanna mention this video was so good i didnt notice it was longer than an hour. Been watching since 6 pm and now its 12 (was doing stuff in-between but never changed videos)

@walf8099 23 дня назад

Gotta love this idea brought back to the chopping block after a couple of years, it was one of my favourites from y'all.

@locutz 20 дней назад

Ive never watched an hr long youtube video beforee this was quite entertaining,learned alot too .

@crossrain1188 21 день назад

You guys have so many shifter Karts and go karts I would love to be in the same place as you guys in a few years from now. Also this video gives me old cars and cameras vibes I love it ♥. Keep it up

@doctordanger4143 21 день назад

I remember watchin' yall back when you started your channel glad to see you're doing well!

@kiwi84ryan 23 дня назад

@49:45 you guys really sharing a pair of gloves lol😊

@daytoncorl271 8 дней назад

Love the Harlequin VW theme, you should nickname it Diesel Gate-Kart😂

@kenselleck2414 22 дня назад

Very nice 1st weld! Go Kart content AND a welding lesson! Nice!

@JPMotorhead1993 22 дня назад

Awesome to see a good diesel build! I have the same engine on my heavily modified Murray red kart with a 40 series comet. It hauls ass. I’ve done some head porting with a custom intake and fuel system work. It turns north of 4k rpm. I have a Garrett gt06 turbo to go on it at some point as well. I’d love to put a lightened or billet aluminum flywheel on one of these. I think it would really improve the response.

@darylSKYTZOwillis 22 дня назад

Tig is a lot like gas welding. I love Tig.

@staind288 23 дня назад

Wow, that engine sounds great and it rolls coal! The best of both worlds plus it has lots of torque (bcuz it's a diesel) and not bad on speed either. Great cart all around

@bw4593 19 дней назад

Yeah this 100% turned out better than I thought it would based on the description and explanation lol. I love the exhaust

@ronshoemake632 20 часов назад

Reach back behind the motor and push the governor and make that motor come alive and you'll get a faster lap time and if nobody sees you they'll trying to figure out how the hell you beat them by a 2mn. LMAO

@frankgeimer5952 16 дней назад

Great video Guys! I loved that you rolled coal and won (I thought it would),

@bryduhbikeguy 23 дня назад

Fun stuff guys. Congrats to BBR for the design.

@ZippoVarga 22 дня назад

Quin(n) is adorable!! That little bit of shy I'm sure is not a reflection of her true personality. Looking forward to the day when she's confident enough to rip the Drag Rail down the track!

@dalenmilligan2561 23 дня назад

I think it should be named the “Rainbolt cart”!

@jasonbirch1182 23 дня назад

Cameras definitely make me kinda weird sometimes too. Shes a super cutie. Love a natural down to earth girl. Nice work john.

@mitchellrooks9547 23 дня назад

That was fantastic loved it great video

@mrbarni4638 23 дня назад

Turbo that biscuit ! I love it !!!

@Halfstep2024 21 день назад

I might buy one of the kits just to see what it looks like sanded and polished to a mirror shine. That’s all I could think about while looking at those parts 😂