Godox V1, V860 & Flashpoint R2 Complete Setup Guide & Tutorial ep.404 

I just bought this exact flash and was a bit confused about the settings. Your video made everything much clearer. I really appreciate your help-thanks!

Very informative and extremely helpful!! Thank you! 🙂

Thanks a 😁Million!!!! Great thorough tutorial, the best explanation of how to use the Godox V1.

The BEST video I’ve seen on these flashes. Thank you!!!

Amazing manual video, I am so bad to go trough paper written manuals and impatient - found this video on spot to learn mine new Godox v1 😊 great job and thank you very much ☺️

You explained it very well ! Thanks you

Hey Mr, you're a phenomenal teacher.

Thank you. Very detailed. Even more informative than the manual.

Thank you very much 🙏🏽 You covered the features thoroughly and because I don’t hear any background music I could get a sense of how the flash will sound normally, for example when zooming in/ out. It felt pretty much like I went through the user manual of this flash 📸 Thanks again 👍🏽

Oh man, this video was so helpful! I finally have begun to understand this piece of equipment. Thank you so very much!!

Thank you. Great information.

Thank You Rob. This was so easy to follow and very helpful.

Thank you very much for spend your time making this video. It just saved my life.

Love your tutorials on flashes! This video was so helpful! Thank you so much for this brilliant, detailed tutorial!

Good explanation, thanks very much 👍

Rob, thanks for an excellent video. I just bought this flash, and your clear explanations have answered a lot of questions. Much appreciated.

Thanks a ton Rob. Great explanation

Thank you so much!! This video is a life saver

Very informative video. Good work!

Fantastic introduction to this flash. I just got it and this video was extremely helpful. Thank you.

Thank you sir Very helpful video Regards

Awesome video, I work with Godox and Flashpoint round flashes, and there were things I learned from your video that I did not know. Thank You!

This was brilliant, thank you ever so much for taking the time and effort to make this content, massive, massive help.

Aha… s2 finally given an explanation for using when master is in TTL mode. Thanks!

Thanks

Your presentation was very good

Thanks a lot. Super informative and well presented!

You are one of the very best, Just as good as Robert Hall, maybe better lol

Thank you

Awesome video. Best I've seen about these flashes!

You’re absolutely incredible! So helpful!

Thank you very much for the complete guide!

Thanks!

rob is a lifesaver as always.

Very nice description Rob. Thanks for sharing your experience and your videos.😊

I do not post comments specifically on youtube … however you changed my mind… Thank you for the detailed explanation for each of the settings … and making it easy for new purchase … ❤much love and way to many wishes 🎉

This was very helpful. Thank you.

sooo good. Thank you :)

Big help and very well done. Thanks!

Thank you so much 🌹🌹 this is a very detailed video 👍

Very good tutorial.

thank you my good sir!

Excellent video, I have just got the Pixapro Gio1N and the settings are almost identical. The user manual is do great and printed very small so this video was perfect. Many thanks for saving me a lot of time.

Thank you for this. itwas really useful.

The best video thank you!

Great tutorial Rob. There is a version 1.2 for this flash available now. Cheers.

Really liked your video much better than others I seen but some things you really went a little fast on. Especially for a first time user trying to set up their flash for the first time.😊

Grazie mille

amazing video, thank you

VERY HELPFUL!!!! TY!!

Wow now this is a complete guide. Godox should put this video in a CD on there products

TCM is documented. I use this all the time with my Flashpoint Evolv 200's.

Thanks for the nice explanation.

Hi! Your video was better than the last two I watched so thank you! Have you done a tutorial to sync the Godox V1 to the xpro trigger? I’ve also watched other videos that I’m probably not understanding 🙈

First off, excellent video. I've subscribed. I'm having trouble getting my Nikon Z9 to work with the flash. I noticed as you were going through that your flash had "TTL". My flash is showing i-TTL. When i-TTL is showing I have TCM available, but not the sync option. What's the difference? Thanks in advance.

You’re the man Rob, that was thorough and excellent, thank you! BTW, I just bought the V1 and there is no designation for HS in the I-TTL mode. It seems like it’s only available in the Manual mode, is my flash defective? Also do you recommend returning the V1 for a pro version?

Excellent video

best

Hi Rob A useful, comprehensive video. ❤ If I may go off topic, did you ever get to the bottom of why focus stacking with flash wasn’t working with the OM-1? I’ve got that problem using a Godox V860iiio off camera with an X2T. Apologies if you’ve already posted a solution that I’ve missed. Regards Keith

Thanks a lot. Now I know that A is not equal A by Nikon

is it possible to set the V1 S up as an off camera flash with high-speed sink using the XP pro two as a trigger?

How did you get to AU mode?

How do you DECREASE THE POWER if the flash is too bright?

It doesn't show Shutter Speed or F Stop on my Godox V1 O with the Panasonic Lumix S5 II X. What can be the reason?

Please Why is my GODOXV1 speedlite flash only flashing when my camera is on SCN mode? Doesn’t flash on manual mode.

If I use this as an off camera flash is there a way to use it as a continuous light?

thank you for the info but I might be missing something, I have the the nikon version, when I switch mine on and in i-ttl mode there is no sync button, this only appears when I go to M (manual mode) how do I get it for I-ttl mode?? thanks

hi may i ask if you know how to turn off the preflash in my godox v1 pro while in fill flash mode? there is no preflash in rear sync tho. i am trying to take a shutter drag photo in fill flash mode and it keeps on firing preflashes thanks

Hi Rob. Between godox v860iii and godox v1 wich of them do you recomend?

Do you know what the color temp is when using the modeling lamp?

I cant contaqt this flash to my sony a7r4 why? 😢 it can take some pics and the has no contact ro camera

Any idea why randomly the zoom will stick on 14mm and not move? Therefore you can't get it out of manual mode? Sony versionof 865ii

need to use my V1 as an on camera trigger can the 'slave' mode change to master?

Hi Rob, I need help (for Fuji cameras). I have a Flashpoint R2 radio transmitter (for Fuji) and it worked great with a Flashpoint Zoom Mini (which I dropped and broke), so I got a Godox V860-III (for Fuji) but I can't get the flash to fire, what am I doing something wrong? Thank you.

Hello. I have just bought a godox v1 to use with my OM-1. If i take a single image it is fine, but when I use it with focus stacking (in-camera), the images are only half there. The top half is black. Do you know why this is please?

Rob, this is a question about this or any godox flaash really. When the flash is in slave mode, you can still adjust the flash type (manual/ttl) and the power on this or really any flash like the ad200 etc on the flash units itself manual. Now what confuses me, on your trigger when you turn a channel on, you set the mode/power on the trigger which is what the flash uses. So what is the point of even being able to set this on the flash when in slave mode? Is there a way to make the trigger (say on any of the godox x triggers) "dumb" so that it tells the flash to fire, but respects what the user has dialed in on the flash physically rather than use what is set on the trigger? I imagine there must be a way to do this, for example, the triggers I have seem to go only to 1/128 but pretty the flashes like the ad200, v1 can go to 1/256, so it seems like on the ad200 for example, the only way this lowest power setting is useable is to remotely trigger the flash but not have the trigger override the manual set settings on the flash itself.

hello Rob, do i need to change WB setting on my camera to Flash or just let it auto? im still confused becuse it became yellow on pictur. im using A6400 and V1

Thanks

Great tutorial. Thank you so much!

Thank you . 😊 very helpful.

thank you!