Govee WiFi (temp/humidity) Thermo-Hygrometer Setup 

Lol ya farm houses are full of little friends

Hi William, I'm glad it was useful for you. I'm hoping to to do a follow up video at some point. Calibration is certainly something to consider for the next one. - Best wishes.

Hi Joseph I did not have the Govee sensors when I built my incubator. For my incubator I used raspberry pi single board computer to control the egg rotation and heater. For humidity I just used brick sized sponges half submerged on water. That’s an interesting idea though using home automation software to run an incubator I’ll have to give that some thought.

Hum . That’s not something I’ve ever given much thought to. My wife and I have the app installed on our phones and logged in with the same account. That’s the only way I know to share.

Your welcome glad it was useful!

My gateway is over 100 feet away inside a building and 4 of the 5 sensors around my hoop house check in regularly so I can see the current temps within the past few min when I’m away from home. A few of them don’t sync their data reliably so historical data requires me to go out with my phone to get it all. If your planning to put these inside your green house keep in mind these are not water / moisture resistant so depending on your conditions you may end up with corrosion on the circuit boards one of mine stopped working reliably inside the hoop and I ended up cleaning some corrosion off the board with wd40 electrical contact cleaner it’s working again. That sensor was accidentally harvested by one of our helpers and sat outside for a few days so that may have been how it got wet inside. I’m hoping to do a follow up review soon

Hi Drew I’ve not played with home assistant. It sounds interesting though.

Hum... So your temp sensors are assigned to your gateway, your gate way is setup to use your wifi and if you do not have blue tooth turned on on your phone then you do not get temp data. if the sensors are too far away they only communicate one way, if thats the case they may not be getting the updated config. You could try brining the sensors in close to the gateway, and confirm they work then take them back out.

@@WhisperingWildMarketFarm Hi. Thanks for the response. I figured it out. I didn't realize that adding the sensors to "the system" would not add them to my "gateway." When I also added them to the "gateway" it started working fine. The directions I received did not mention the part where you add it to the gateway. Thanks!

@@paulsterman7169 glad to hear it’s working for you these are neat little sensors.

In my experience the devices themselves will log the data for at least a week or so so that when you get back into bluetooth range you can download the data. If they are within range of their WIFI gateways and that gateway has internet access then it will continually update the data. Right now I have them in my hoop houses and when I'm 50 miles away I can still get live temperature data (or at least within a few min).

@@WhisperingWildMarketFarm does it mean when all the sensors are in range of the gateway, connected to the wifi then you can use the app from your phone regardless if your on wifi so just use 4G to see live data?

@@EvilGodXL short answer yes if I’m understood your question correctly that’s how it works for me. Long answer if the sensors are in range of the Wi-Fi gateway and paired to that gateway and that gateway is connected to the internet the sensors will upload data to the govee cloud and your phones app will fetch the data from the govee cloud. Through your 4g data connection.

@@WhisperingWildMarketFarm super, thank you for the fast and thorough response. I will be buying a couple!

@@WhisperingWildMarketFarm sorry one more question, on average how long will the battery last in the thermometers? I have read some different reports online

Mine just work when a new battery is installed even when run dead and have sat for bit. I’ve swapped batteries in my original units 2 or 3 times and they just come back.

How long does the battery usually last?

@@ebentrunk For me the batteries seem last 2-3 months I do notice they do not last as long in the winter/freezers but they are still around the 2-month mark. In summertime more towards the 3-month mark.

Posted with the wrong account.. Sorry for the duplicate. The battery Life on these ranges between 2 and 3 months and it takes a AAA.

lol ya…. It took me way longer than I’d like to admit to read that correctly.

Thats awesome

I just purchased 3 more sensors and hope to be making a fallow up video soon

@@WhisperingWildMarketFarm interesting I am returning mine . inaccurate

Hum can you be more specific I’m curious if my units show the Sam inaccuracy?

@@WhisperingWildMarketFarm I compared humidity and temperature with other devices. The humidity was off by about 5% temperature was usually correct.

you can calibrate differences but still

lol you are so correct It’s embarrassing how long it took me to be able to read that correctly!