No video :(

[GR86·BRZ] Remove/Install Coilovers (By Yourself)

Подписаться 1,8 тыс.

Просмотров 13 тыс.

50% 1

This video is to help guide you on replacing the coilovers of your 22BRZ/GR86.
This is to help you do it on your own with no help when your alone.
I got the TEIN Mono Racing Damper Spec R That is designed for the GR86/BRZ Cup in Japan.
Hope it's helpful.
Support us by subscribing and giving out comments!
Remarks:
- Lower the car down on the ground before Torque tightening the bolt and nuts.
- Romove coil overs on both sides to install the stabilizer link.
TEIN Mono Racing Damper Spec R:
www.tein.co.jp...
Spring Rate
Front: 8 kgf/mm
Rear: 10 kgf/mm

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@markpruitt3379 11 месяцев назад

WOW!! I've viewed thousands of hours of RU-vid DIY automotive videos. Your videos are stellar. Great organization, states exactly what to do in detail, and doing so without superfluous verbiage. Perfect camera exposure of the work area with excellent image quality. Keep up the excellent work. You have a bright future as a RU-vid presenter.

@39gjapan 11 месяцев назад

Thank you for the wonderful feedback. Appreciate it very much. We are doing our best to create effective/helpful DIY video guide. Audio and voice over may be not the best but slowly learning to improve.

@85jamesr 11 месяцев назад

This video walk-through is invaluable in helping me step-by-step install my Tein coil overs on my 2020 BRZ thank you so much for your dedication to the craft of automotive mechanics and to your fans.

@39gjapan 11 месяцев назад

Glad it helped! And good Job for doing it on your own. We just want to show the details and every step so people can find a full DIY video of this platform. Appreciate the love!

@thisisKB87 6 месяцев назад

This one definitely needs way more views. The angles provided and straight forward instructions are great!

@39gjapan 6 месяцев назад

Thank you. Appreciate it alot. This is very touching.

@onlyleona3861 Год назад

I have tein flex A’s that have just been sitting for almost half a year this video made me ready to try and installing them myself this week 😂

@39gjapan Год назад

Cool! You’ll do just fine. Safety first! 😊👍

@jz5980 Год назад

Awesome video!!! my confidence in accomplishing this task myself has shot up

@diiaa366 Год назад

Great presentation, thank you!

@39gjapan Год назад

Thanks for the comment! 😊👍

@davidr5520 Год назад

Looking forward to installing my sensational KW V3 " Clubsports " Coilovers on my 2023 Subaru BRZ { with Aluminium knuckles unlike the GR86 } in early May when the car is delivered . Thanks for the sensational Video. Well done !

@39gjapan Год назад

Thank you for subscribing. KW is one of the best! Good luck on your installation.

@mrael6304 Год назад

Nice install and great information but I did ask my grandma to loosen the wheel lugs for me.

@39gjapan Год назад

Thanks. Having an extra hand is way better. Just showing how to do it alone.

@charliebanks8419 10 месяцев назад

Just a suggestion use a 6 point wrench and sockets on torqued nuts less likely to strip or roll the points. Great video!

@39gjapan 9 месяцев назад

Thanks for the Tip, but am still kind of limited on my hand tools. gonna have to buy more soon.

@pope6969 Год назад

Nice skills bro

@39gjapan Год назад

Thanks ✌

@MrBencher446 11 месяцев назад

Great video, not hard at all. 👍🏻

@39gjapan 11 месяцев назад

Thanks for the comment. This channel is to encourage everyone to do DIY and guide you into details.

@royalad Год назад

Good job 👍 thanks

@39gjapan Год назад

Thank you for the positive comment!

@jumboshirmp Год назад

5 months into ownership of the super cool Tein Mono Racing. Has it been good so far?

@39gjapan Год назад

Absolutely loving it. Loving the handling on the corners even more.

@jumboshirmp Год назад

@@39gjapan fantastic!! I’m likely buying a set next month

@jaredw410 5 дней назад

Tein seems to have lost some of its popularity in USA. I’m guessing it happened when they started manufacturing their low end kits in places other than Japan. I have a new Z and am in the market for some coilovers. I’m curious what you would say when comparing High end tein to Aragosta or Ohlins? HKS? Thanks !

@39gjapan 2 дня назад

I've tried driving one of my friend's ohlins. One of the best drives. I haven't tried other high-end coilovers so I can't give you comparison insights.

@Mellyfilm Год назад

Nice clean work. I would be better to torque the nuts when the car is on the ground. The bushings would have longer life.

@39gjapan Год назад

Thanks. And your right. So actually retorqued them. Just couldn’t find a way to edit an uploaded video. 😅

@Kuyadice 10 месяцев назад

Sup guys. Where do i find the foot pound torque because i can’t understand the measurement you using in this video, Im a newbie using torque wrench. Thanks

@39gjapan 10 месяцев назад

Hi, torque specs are usually written on coilovers manual. But you can also use a converter online N.m to lbf

@rohandias1244 15 дней назад

grateful if you could explain this comment further (for a beginner) - which are the nuts that should be torqued once the car is on the ground?

@Mellyfilm 15 дней назад

@@rohandias1244 Nuts or bolts that fasten a bushing in a suspension. If you tighten them with the wheels in the air, when the car will go to the ground, the bushing would have a preload on them. If you torque them when the car is on the ground, the bushing would be in the right position for driving, without any preload, so less stress on them.

@chrispyy2199 Год назад

What’s the difference between theses and bc? Awesome video by the way!

@39gjapan Год назад

Hi, thanks for the positive feedback! For your question tho, you have to more specific on which model of BC Racing your talking about. TEIN also has a wide range of Coilovers. So it&s kind of hard to tell which is better. TEIN is has been in the coilover industry for so long, but that doesn't mean it's better than BC Racing. If your spending the same amount, I found this comparison video on TEIN Mono Sport vs. BC ER Coilovers from "Drive Tune Media" ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qsbdNy8XWkM.html

@K03sport 6 месяцев назад

might I suggest a HF breaker bar and 1 wheel socket to remove the lug nuts easier (less dangerous than the 4-way wrench) __ I know Tein is supposed to be a good brand for suspension, but I never hear great things about their stuff. Is their top tier race stuff good and their street stuff meh. Or is it ppl not knowing the right Tein product for their car or misunderstanding what the capabilities/limitations of the Tein product they installed/chose? I personally see them as bottom tier suspension bits...am I wrong?

@39gjapan 6 месяцев назад

Yeah, I see a lot of guys get the bottom tier street coils and use them on track. they cheap out and complain. TEIN has been out there for so long, they got the right one for your preference. 👍

@Kuyadice 10 месяцев назад

Hey bro. Quick question is Tein Flex Z is good too?

@39gjapan 10 месяцев назад

Tein Flex Z is good specially made for the streets. But dont expect it to be that good for the track. 👍

@cheex9861 5 месяцев назад

I have the Tein flex z's I could not get the lock to unlock lol so I just left it..

@39gjapan 5 месяцев назад

Hi, what lock are we talking about?

@cheex9861 5 месяцев назад

@@39gjapan the bottom ring so you can lower it more

@39gjapan 5 месяцев назад

You need to use something to counter the counter-clockwise turn of the lower mount lock (bottom ring). So use a wrench or any bar to make sure the lower mount stays and not turn together with the bottom ring.

@AMWChannel 6 месяцев назад

What spring rate are you running for this setup. How the feeling on the street driving. Its to hard or just good

@39gjapan 5 месяцев назад

Front: 8kg/mm Rear: 10kg/mm It is kinda hard for the street even at full soft setting. But it feels great on track.

@flixzyrl3075 5 месяцев назад

did you need anything other than just the coilovers?

@39gjapan 5 месяцев назад

For the street it can be ggod with just the coils. But I suggest you replace sabilizer links (swaybar link) as well when you drop the car. Some brands comes with the coils, but mostly don't. I got myself front and rear coz I track the car.

@user-dd1ht5rk2y Год назад

And last question sir i just got my gr86 last 2 month but my disc brake looks rusty. Do you have any idea what to do?

@39gjapan Год назад

It’s only surface rust. It will be cleared after a drive. Brake rotor rust can be worse depending on the climate. I still can’t find a way to prevent it from rusting.

@user-dd1ht5rk2y Год назад

Hi! Is that a tein flex z? Whats the difference with tein street? Im planning to get one tho. Thanks in advance

@39gjapan Год назад

Hi, this is the “Mono Racing Damper SpecR”.. In short.. Flex z and Street are both Twin tube, while this one is a Single/Mono tube. Twin tube are designed to be comfortable on a daily drive. Mono tube ones are usually designed for the track.

@user-dd1ht5rk2y Год назад

@@39gjapan Thank you so much. So should i get tein flex z? Sorry im just a newbie.

@39gjapan Год назад

Everyone has their own opinioin. But if you really want TEINs, I can suggest you Flex-Z if your mostly gonna ride on the streets or a daily. There are a lot of coilovers out there, so it's really hard to pick one.

@user-dd1ht5rk2y Год назад

@@39gjapan Thats true. I want something trusty brand and doesnt break the bank.

@39gjapan Год назад

@@user-dd1ht5rk2y If ypu really want to go with a Japanese Brand, Flex-Z is good. A lot of people runs them and they’re great.

@i-barg Год назад

Hey! Thanks for all the great content on the GR86. I am curious to know what the 86 community in Japan thinks about the oil starvation issue? Is it a big concern there? Are you noticing many failures on track? 900BRZ's overview / analysis of the issue (note the KB baffle did not address the issue) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4Jk5WTWoqt4.html Thanks!

@39gjapan Год назад

Your welcome! I will do a video of it soon. Will interview people on the next event.

@i-barg Год назад

@@39gjapan Great idea! Would be interesting to know the differences in their setup and if anyone is actually measuring oil pressure (similar track&build / 900BRZ)

@i-barg Год назад

@@39gjapan Also if you can find out if anyone is running the Kazama baffle... It would be great to know their feedback!