GrandMA2 & Capture 2020 / Timecode show + Cuelist 

Thanks!

Thanks AKSKMY! The color swap is just a blue/orange chase. This chase is recorded to the timecode. The movement effect on 9:50 is a modified dim/tilt flyout effect.

Tibo Spiessens I see I managed to find a way to do the swapping via effects as well. Going to try the dim/tilt fly out soon. Just to check it’s a combine effect of both dim and tilt together all in one effect preset.

AKSKMY it’s both dim and tilt all in one single effect. I started from the ‘load predefiend’ effect and then adjusted it a bit.

Thanks! You can connect Capture and GrandMA2 by artnet. For this you will need some piece of MA2 hardware to be able to stream Artnet to Capture.

Yes, it's working with NDI inputs!

Thats good News, thanks

Hi Gordon, the content you see on the screens was pre-recorded before I recorded the actual show. So the video on the screens was just playing back from Resolume Arena, which I synced on the main timecode so it runs in sync with the track and the lights.

Awesome, thanks for the response.

@@gordonhuxter363 Or you can use the NDI scan converter to feedback (in a metarial, work like Ledscreen )

Without MA hardware you can not connect MA2 to capture. Dot2 is good for learning an MA product they give you one art-net universe so you can connect capture that way.

Hi Alejandro, if you want to control Capture using MA2, you need a console to get parameters. If you connect a console, you can send DMX to Capture using Artnet or MA2-net.

I would also recommend looking into TouchDesigner for some potential options as you might be able to record DMX and record it into ArtNet through real-time software conversion. That way you can keep it in the same computer. Touch is another beast of a software.

I added a new track on Logic with a SMPTE LTC audio file. I routed the audio of this track to a second output on my external soundcard. This second output will directly go into Resolume Arena6 for the timecode.