Great Looking Paper Structures, Only $8!?

Подписаться 40 тыс.

Просмотров 35 тыс.

50% 1

Are you looking for an affordable way to add structures to your layout, try a paper structure kit! The one I build in this video only cost $8. Many more available from www.teamtrackm...
Want to help support the channel? Buy me a cup of coffee!
www.buymeacoff...
Check out my website: www.steves-tra...
LINKS TO PRODUCTS IN THIS VIDEO:
Team Track Models: www.teamtrackm...
Snap-off Blade Utility Knife: amzn.to/3OXM1cj
X-Acto Knives: amzn.to/3ZoEuXE
Extra Strength Glue Sticks: amzn.to/3EBFIqA
1-2-3 Blocks: amzn.to/3KDmJQz
Drawing Triangles: amzn.to/3EDraXs
TRAIN SETS:
N Scale Kato Amtrack Set: amzn.to/3iyCbBt
N Scale Kato Super Chief Set: amzn.to/3B4ISS7
Kato N Scale Track and Controller Set 1: amzn.to/3B61UHF
Kato N Scale Track and Controller Set 2: amzn.to/3Y5hflZ
More Kato Track Sets: amzn.to/3OYcZQJ
HO Scale Rail Chief Train Set: amzn.to/3OVJizQ
O Scale Lionel Polar Express Train Set: amzn.to/3EQLcNu
O Scale Lionel Hogwarts Express Train Set: amzn.to/3Y5hM7t
KATO TRACK:
Kato Unitrack (N Scale): amzn.to/3kl9msS
Kato Unitrack (HO Scale): amzn.to/3kl9msS
CONTROLLERS:
Battery Powered Controllers that work great for N scale too: amzn.to/3umqFfa
Awesome DCC Starter System: amzn.to/3gZVbbp
LAYOUT KIT:
HO Scale Grand Valley Kit: amzn.to/3uiPvN1 (my first adult railroad project)
Track set for Grand Valley Kit: amzn.to/3VPyzsS
Building set for Grand Valley Kit: amzn.to/3F1b8WQ
N Scale Scenic Ridge Kit: woodlandscenic...
N Scale building set: amzn.to/3BsZMu3
TOOLS:
Bench top hot wire cutter: amzn.to/3Voq1tk
My Resin 3D Printer: amzn.to/3gT2PEH
My Filament 3D Printer (upgraded version): amzn.to/3Uroph6
Snap-off Blade Utility Knife: amzn.to/3OXM1cj
Cordless Dremel Set: amzn.to/3VO86Mm
My DeWalt cordless drill: amzn.to/3gW5i18
My Dewalt cordless saw (current version): amzn.to/3H73Jbo
My Dewalt cordless miter saw: amzn.to/3VNnzfL
My DeWalt Cordless Brad Nailer: amzn.to/3XBvltD
Speed Squares: amzn.to/3IxfJ6h
Hot glue gun: amzn.to/3ZFcTmk
VIDEO AND AUDIO GEAR:
Rode Wireless Mic: amzn.to/3KhNlCy
Shure MV88 Portable iOS Microphone (Great external microphone for iPhone): amzn.to/3LmWw67
Smartphone vlogging kit: amzn.to/3rTXyPf
Selfie Mirror to see phone screen when recording self with back cameras: amzn.to/3KiCgRU
Canon SL3 (nice basic DSLR): amzn.to/3kdBHy1
LED light panels: amzn.to/36NZBNy
More Items:
NEC PowerCab: amzn.to/3acwox9
Digitrax DS74 Units: amzn.to/3M7KBbW
Pneumatic door lift stay: amzn.to/3x0AAb8
Toggle latches: amzn.to/3aiFt7P
Carry Handle: amzn.to/3GCsUAi
Drawer slides (Home Depot): thd.co/3M6XTpk
Drawer slides: amzn.to/3PYRjV4
Push Buttons: amzn.to/3M9eEQG
As an Amazon affiliate, I receive a commission on any products purchased through Amazon links.

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@steve87thpsap Год назад

Great job and nice work showing us how to build it. One tip I got from my paper rafting wife, for sharper folds score the paper first, you can use the back of the knife. Score where you are folding too, or inside fold area.

@StevesTrains Год назад

Good idea on scoring the paper.

@JohnB9474 27 дней назад

Steve thanks for doing this kit. I have seen their website in the past but the kits did not look all that easy. You made it look easier than I thought, so I order the same kit and have it in my computer ready to print. Good joib!

@hadynmcloughlin4661 Месяц назад

After trying my first scratch builds using balsa wood and acrylic paints going to try a new style using card stock kits with some watercolour pencil detailing, thanks for sharing your process.

@tinplategeektoo Год назад

If you model UK outline, then scalescenes do the same thing and have a few free kits too so you can try to see if it is really your thing.

@StevesTrains Год назад

I have seen their product offerings. Some are generic enough looking to be used in a U.S. setting as well I think.

@KevinSquire Год назад

@@StevesTrains Yes, I agree. I love ScaleScenes and use them regularly. Admittingly, I am modelling Eastern US - so I think that helps a lot. Just have to print it out at 92.5% since UK N-Scale is different than US N-Scale.

@mikerubynfs Год назад

I've used a few Scalescenes models on a HO US based layout for larger structures I print at 100% they are just a bit larger prototypes. Latest was the concrete bridge, that was a lot of making pillars and beams, but it does look good now finished.

@gallopfreyan1622 Год назад

I came to recommend Scalescenes as well. They look great and are very cost-effective. Last year, I even wrote up a Scalescenes tutorial for our local club's newsletter. I'll have to recommend Steve's video in future though, since seeing the process in video makes everything a lot more understandable.

@criticalthinker7822 6 месяцев назад

Tape is your friend when assembling printouts. Also for anybody who wants to add LED lights, black out the interior with black paint. Use painters tape to conceal any corners or openings to keep loght from shining through.

@StevesTrains 5 месяцев назад

Good tip. I’ve used electrical tape to blackout windows and other interior areas from lights in the past but I kind of forget about things like that over time.

@Trains-With-Shane Год назад

That's a bunch of work but seems to give a pretty darn good result. All of the paper kits I have seen previously were a cube-craft type assembly where you just print out one flat piece, cut it out, and then fold it back in on itself and glue the edges-tabs together to make a 3D building.

@someguy2637 Год назад

Steve, Thanks for sharing your experience with paper structures. I have tried these myself a few years ago. I purchased mine on ebay from a Canadian vendor. This guy physically mailed me the paper sheets which I then mounted on card stock or poster board. Once you have these in hand you can print multiple sheets and make as many copies as you wanted. As you stated, these took considerable time cutting out, and to glue together. True, they do provide an economical way to populate a layout; especially if you build a lot of layouts. I ended up using a mixture of these, built up and kit bashed structures together. I also used the face of these structures on back drops which worked out quite well for me. Like anything else, you get better at using these the more you do. Thanks again for making this video to share your views. If you ever make a layout using these entirely, I think that would make a great video.

@fmphotooffice5513 Год назад

About 30 years ago while studying the Titanic, reading books, etc (before the stupid movie) I constructed a paper model of the ship. Therapeutic. I used A R wood glue and pressure to make quick permanent connections, no waiting.

@StevesTrains Год назад

Nice! I bet that was an amazing project!

@jackheninger5471 Год назад

Thanks for this idea Steve. You may have solved a background issue of what to use and where to get them on my own layout. These paper models would also make great temporary place holder models until you get the kit you want or do some scratchbuilding. Northeastern Scale Models, known for their stripwood produces wood pallets for N and HO scales. If my memory is close you get + or - 10 pallets for less than $5.00.

@scottpool4777 Год назад

Yes authentic definitely thank you very much.

@xmtryanx Год назад

Nice! I've been making paper ship models for years, and never thought of paper for my layout. Great idea!

@troysimpson9550 Год назад

Thanks Steve for doing this Video for us. One thing I have found that works great for making these type of small building is using rectangle magnets with those metal blocks you have. They make great clamps and hold things at 90 degree angles well.

@StevesTrains Год назад

Great tip!

@idiotluggage Год назад

Thanks for sharing this. I have used paper craft buildings in the past and like them. It's nice to see that the company has these in OO scale.

@edwardstd52 Год назад

Nice work! I've done a couple but not the "craftsman" kind. I'll probably tackle some of those. People who like puzzles will like these as well.

@maltnz Год назад

5:00 scratch - if the scratch is grey and you have them, try dark and light lead pencils on the scratch and see if that disguises the mark sufficiently.

@basfinnis Год назад

The result is really good 👌 Thanks for the run-through.

@Japan-in-N Год назад

If you’re doing a lot of these it’s worth investing in a decent specific card glue. Here in the uk we have a brand called Rocket Card Glue and I’m sure it’s available in North America.

@StevesTrains Год назад

Yeah, I’ve seen that now that I’ve been looking more into this the past few days and that looks like something to pick up for sure. Thanks for the tip!

@modelrailroader5619 Год назад

I have built a few of these. The price is right and they look great. Your first one will be a learning experience, but successive builds will be fun and easier to put together. Scoring the fold lines is very important! Thanks for sharing.

@DansGrandValley Год назад

Very cool Steve, thanks for sharing. I just heard about these from a friend yesterday, so it’s great to see your video on them!

@DMRJ Год назад

I tried their free loading dock. Decent instructions. Pretty good looking too.

@HHExpress Год назад

Very nice demonstration Steve, I need to look into that one time. Greetings from Hai

@rosiehaircolor2299 Год назад

if you wanted to go to the extra step it would be fun to hit these with a few coats of clear and give them some various paint and weathering effects.

@StevesTrains Год назад

Yep, I plan to spray it with dull coat at the very least, once I go out and buy a new can of it.

@rickrodrick1978 Год назад

Thanks for this video, Steve. I'm planning to use several of these kits on my layout but I have never seen the steps along the way. This gave me a much better sense of what I'm looking forward to.

@Silverstatetrains Год назад

Thanks for sharing this. I am new to the hobby and I am currently working on a layout and may try one of these as the price is right.

@mikerubynfs Год назад

I use cork backed rules for cutting against, they don't slip or mark the prints. When gluing sheets to card I use a small roller to make them flat and smooth, it also makes sharp edges when folding around corners.

@StevesTrains Год назад

Great tips!

@Ron_Rhodes Год назад

I've been designing my own buildings in Blender, making sure to keep the surfaces simple and flat. I take Google street view snapshots of the prototype buildings into Photoshop to clean up ,size and scale the material and apply them as UV maps. I export the 3D model as an .OBJ file and load it into Pepakura for unfolding and layout on to pages which I export as .PNGs. These get uploaded to my Cricut Design Space project where they are printed as Print then Cut images. I print them on cheap photo paper and then have my Cricut Vinyl Die cutter cut out all the walls and windows. I usually have to print two copies so the walls are thick enough, but I don't care about extra cutting at this point. I made an N scale Transamerica Pyramid and lit it with addressable RGB LEDs. Seems like a lot of extra work but it's very satisfying to see it all in the end and to know that it's all my design. And I don't worry about cutting my fingers off.

@StevesTrains Год назад

Wow, that sounds awesome! Yeah using an automated cutting device would make things go super fast.

@kwarts Год назад

Hi, I wonder why you don't use the Blender add on for exporting papermodels. Does that give problems with your textures? Kind regards, Christiaan

@Ron_Rhodes Год назад

@@kwarts Pepakura ($) lets you break and rejoin seams and handles tabs and lets you design the layout of each page of output very well and I love it.

@Ron_Rhodes Год назад

@@StevesTrains The cricut is limited to 6.75 X 9.25 inches per page however, so you need to piece together larger skyscapers.

@allenwilson8913 Год назад

I wonder how well these will last in areas of higher humidity. I love the idea but I’m concerned the bldg may not fare well in our humidity. Ive seen a lot of paper based items get wavy after a period of time.

@StevesTrains Год назад

Yeah, I’m wondering as well. I did spray it down with multiple coats of dull coat which will hopefully help.

@allenwilson8913 Год назад

@@StevesTrains we’re gonna need a long term report on this as well. Thanks for the channel

@daviemaclean61 Год назад

I have all manner of structures from scratch built to plastic and resin kits to card and paper ones on my layout. So this was very helpful for those sorts of kit. I'm not sure if it is available in the US (I'm in the UK) or is possibly under a different brand name, but you should try Roket (not a misspelling!) card glue. I had dismissed it as expensive PVA/white glue, but boy was I wrong! It dries quicker and stronger than those types and speeds up construction no end. Cheers PS - if you're not already aware of his channel, check out Chandwell, which is also in N scale. Michael is a dab hand with cardboard and glue!

@StevesTrains Год назад

Great tip! I’ll have to check that out. A faster drying, non-super glue would be super handy to have.

@michaelzalewski2532 Год назад

Don't forget the free dock on the sight

@StevesTrains Год назад

Yes, I forgot to mention that!

@gerdeguelle1967 Год назад

Nice building and a nice video

@efremmallach6501 Год назад

Thanks for this! Paper kits hadn't really been on my radar until now, but I'll definitely keep them in mind. However, I think the $7.99 price is a bit deceiving. There's probably at least $20 worth of ink in the building parts and the instructions sheets. $28 is still cheap, to say nothing of the convenience of getting it instantly without leaving your home, but not as dramatic a comparison as just looking at the direct cost suggests.

@StevesTrains Год назад

I have a color laser printer that I’ve had for 10-15 years, so the cost per page for me is probably a quarter at most. Yes, with an ink jet you can run through ink in a hurry.

@efremmallach6501 Год назад

@@StevesTrains Valid point; YMMV. Not everyone has an ink-jet printer with small, expensive cartridges. If one doesn't, that clearly makes a difference in the economics - but with any printer, they're still cheaper than wood!

@ashleybishop9937 Год назад

Have you thought about using a Cricut or Sillouette cutting machine, especially if you are doing a few structures? It is something I have thought about but not done.

@StevesTrains Год назад

Yes, or the wondercutter that micro mark has, one of those ultrasonic cutting blades. That could help out especially with cutting heavier card stock or matte board. I may at some point pick up something like that and try it out.

@FredWilbury Год назад

Yep nice I use Scalescenes and kit bash and enhance as for the cutting out it’s just what it is not a bother I don’t think 😊

@StevesTrains Год назад

No, it isn’t bad. But does make me want to buy one of those ultrasonic knives that will cut through matte board and such super easy.

@tonykane8866 Год назад

I would bet that u could use that as a stencil and use styrene

@davidstokes8441 Год назад

It's the hand held shots I am having trouble with, it might just be me. In real life we can keep up, but it seems the subject of the shot needs to be kept still once in the camera.

@StevesTrains Год назад

Good to know. I’ll try be a bit more conscious about that in the future. I always appreciate feedback to help make videos better!

@brianbassett4379 Год назад

You must be so proud.

@richardmorgan9273 Год назад

It's not that difficult to design simple buildings from scratch - textures such as brickwork and stone plus doors and windows can easily be found online and you can find prototype buildings from streetview or photographs as inspiration. Even if you get it wrong you've not wasted any money other than for printer ink - so just experiment!

@marktaylor8659 Год назад

Great job Steve. Did you clear coat the finished model to prevent fading? What kind of printer are you using? Inkjet? Laserjet? Thanks for sharing.

@StevesTrains Год назад

I’ll spray it with dull coat once I pick up another can. I used a color laser printer that is probably 15 years old but it seemed to produce pretty good results. I just used regular printer paper. I probably would have had slightly better results if I had used a better paper quality.

@SkipRoGlo Год назад

Great video. What scale are these buildings?

@StevesTrains Год назад

This one was N scale but you can download the PDFs in different scales.

@spiderkidLarry Год назад

Hello, do I need something to fit the bulildings or trucks around when I glue them? If so like what? What should I buy or something? I"m very new to this. Thanks

@StevesTrains Год назад

No, you don’t need anything, but maybe for the trucks especially it would be helpful to have a block of foam or something like that for the inside so they are more durable if you plan to handle them a lot.

@jerrysmith1929 Год назад

How well does the matboard hold up to humidity? What about using styrene as the substrate rather than matboard?

@StevesTrains Год назад

We shall see. I plan to spray it down inside and out with dull coat which should help. But I need to go out and buy a new can of it.

@JohnB9474 25 дней назад

Steve another question for you. I have done a half dozen black and white test prints to make sure i have it right. In measuring the loading doors I find them all to be 8' by 9' and that seems a little small to me. I've made sure all the print settings are correct. Print to 100%. Make sure scale to fit is off. and still the doors seem too small to me. Can you advise as to how yours came out? Thanks again.

@StevesTrains 24 дня назад

I'll check mine with a scale ruler when I get a chance. They are not as big as say the rail doors on a walthers warehouse type kit, but I'm not sure on the scale size.

@StevesTrains 20 дней назад

So I measured them today and it came out to about 8.3’x10’ for the rail loading doors. I didn’t have my scale ruler handy so I just measured with a regular ruler and the doors were 0.625”x0.75” and then I multiplied by 160 for US N scale (I think British n scale is 1:148)

@paulrmatzke298 11 месяцев назад

What is the glue in the small blue bottle?

@robertb7918 10 месяцев назад

I notice that you have made an HO model. I ordered the N scale model of this building and I found many of the pieces to be so small that it was all but impossible to build the model. I have many years experience of building model railways and scratch building. I suspect that having designed the HO version of this building, the supplier reduced the scale of the design to be printed out for N scale and did not bother to check for the feasibility of the model when printed at such a small size. This is a pity because if the model was simplified and all the fiddly bits for the doors were removed it would be a great product.

@StevesTrains 10 месяцев назад

No, I made an N scale model. It is on my n scale switching layout.

@FelineSublime Год назад

How would these .pdfs go as plans for using styrene sheet instead of cardstock?

@StevesTrains Год назад

No reason you couldn’t temporarily stick them to styrene and then cut the pieces out that way.

@karenneighbors7659 Год назад

Where do you get the pdf file?

@StevesTrains Год назад

After you purchase the kit you get a link to a page with the pdf downloads for the kit and for the instruction sheets.

@davidstokes8441 Год назад

PLease, if you are showing something, like a building, to camera keep it still for ar least 5 seconds so the veiwer can focus on it.

@StevesTrains Год назад

So I actually originally had still images and then I replaced them with the structure spinning on the turntable as I figured it would be easier for people to scrub through the video back and forth to look at any angle they wanted. I’ll consider keeping still images in the future.

@mikeelliott2736 Год назад

I have to ask. Why the gloves?

@StevesTrains Год назад

I mentioned in the video so I wouldn’t have to keep washing my hands from getting glue on them. This way I could just pull the gloves off for adjusting the camera controls and not any glue on them. I did that with super glue once…

@speeedskater Год назад

gloves?

@StevesTrains Год назад

Only so I wouldn’t have to wash my hands before handling the camera if I got glue on them. Obviously I didn’t need them for cutting but didn’t expect to spend so much time cutting.

@dogyerf21 Год назад

No way. Pay the extra money for molded details and save a ton of time not having to cut a million little pieces out. With painting and weathering, it’s still going to be a lot faster and look a lot better.

@StevesTrains Год назад

Lance Mindheim combines both to excellent results. Using printed imagery for a lot of the wall textured and then adding 3d details on top of that. Really depends on the wall textures you are dealing with. I think printed textures can really shine when trying replicate concrete panels and that kind of thing. Printed brick textures aren’t going to look as good in HO scale certainly. Maybe ok in N scale.

@KevinSquire Год назад

For what its worth, the model he choose to record is designed to be VERY customizable. So there is a lot of extra cutting / folding/ and other little pieces compared to some other paper models/options. For example, instead of having 1 long piece for a long wall, you have 4 small segments that get glued together. (Kinda similar to the DPM kits if you are familiar with those, but even more customizable)

@StevesTrains Год назад

Yes, it does make it easy to build any size or configuration of structure you want. They do have easier kits where it is more of the whole wall at one time type of process that will go faster. You could do that and then add on some 3D details if you wanted and get a good looking structure pretty fast. What might work nice is 3D printing or buying doors and windows to use with the paper kits. I may have to try that. That would save a lot of time and perhaps give a really nice looking final product.

@melkitson Год назад

I guess it depends a lot on your income. Some of us are dedicated model railway enthusiasts but are totally unable to afford more expensive kits. The satisfaction gained from building and customising card kits is immense.

@melkitson Год назад

This looks like a direct rip off of the Scalescenes concept even down to the instructions on the cut out sheets. I have used Scalescenes stuff for years even including gantries for container loading and unloading.

@StevesTrains Год назад

Can’t really comment on that since I’m new to paper structures but I’ll try to check out a scalescenes kit at some point here.

@davidstokes8441 Год назад

I know you put a lot of work into this video, but there is too much waffle and not a lot of action, a true ibnication that you did not read the instructions first, sorry mate, down mark. 5/10