Тёмный

Great RC Plane Gasoline Engine | Stinger 15CC Gas - Petrol Engine (My first engine) 

Joyplanes
Подписаться 186 тыс.
Просмотров 87 тыс.
50% 1

This is my first RC engine, it uses gasoline/petrol to run, which will save a lot in operation cost, no need for special fuel, it's really powerful and simple, 15cc is enough for a moderate size RC plane, with a 700cc fuel tank will hold enough fuel for 1-hour flight. The price is very competitive and this is only one of the models available from that online store.
As for every new engine, the break-in process has to be carried out to ensure the conditioning of the mechanical parts and get more life out of the engine, in this video I show all of that.
Engine bit.ly/3fvzeO9
(use the coupon "JoyplanesRC" for 15% off, valid until June 30th, 2021)
Join our Discord server: / discord
Website joyplanes.com/
Become one of us: goo.gl/zKQ706
Facebook / joyplanesrc
Instagram / joyplanes
More info about the engine.
This is a 2 stroke engine, 15CC and uses a Walbro carburetor, runs between 1500 to 15000 RPM, it can be fitted with a 13x6 or 15x6 2 blade propeler, the maximum output power is 2.4hp/1.76KW.
#JoyplanesRC #HobbyRC

Хобби

Опубликовано:

 

27 май 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 96   
@xrae21
@xrae21 Год назад
This entire video is a classic "What NOT to do" unless you want to risk getting hurt or looking like a fool. Always anchor your test stand so that it doesn't have to be held down by your hands. Never stand to the side engine in the propeller damage path should it break. Never use a damaged wood propeller. Never run an engine for hours on a test stand. Set the high and low needles, pull it off the stand, mount it and break it in in the air. Never run it at the same rpm for more than a minute or two tops during break in. Everyone has to start somewhere but when I see beginners trying to give advice. I cringe because the majority of times it's bad advice and could get someone hurt.
@Joyplanes
@Joyplanes Год назад
Thank you for the advice!
@knpjdad
@knpjdad Год назад
Thank you for saying all that that’s exactly what I was thinking too this is a how not to be safe video anybody that’s watching this please do not do what this guy is doing this is almost like a comedy skit but with very serious consequences
@reignman0311
@reignman0311 Год назад
Yup, 8:37 looking at that prop right below his arm where he was holding that test stand made me cringe,
@praveensharma3456
@praveensharma3456 Год назад
He’s going by the instruction manual
@lowtus7
@lowtus7 3 года назад
Best practice in my opinion is to use a cheap non synthetic oil for break in. High performance oil can hinder the break in as the rings may not bed in properly. It won't damage the engine, but may cause lower compression. You can buy a prop reamer to enlarge the prop hole, may be an idea, also balance your prop! Lol. Be careful and have fun.
@UncleDuncan5092
@UncleDuncan5092 8 месяцев назад
I think you did a good job with your first gas engine. Yes, the test stand should be more secure for your safety, but you survived. 👍🏼
@zubuxstein
@zubuxstein 3 года назад
the vibrations is normal, it is recommended to break-in gas two strokes on the airframe so it absorbs the vibration. Like you did is ok because is shaking and that is what you want. Many destroy them during break-in mounting the on a solid engine stand. The engine will let you know when is past break-in, if transition is a little rough, and has only low and high, still needs some more runs. It will be spitting out excessive amount of black oil when new. Once the piston ring settles, engine will not spit out too much black oil. Keep the oil mix 25:1 to 32:1, do not go any leaner than that, will kill the engine. Some plug-in tachometers will not let the engine start.
@VideoJocky1
@VideoJocky1 8 месяцев назад
I'm sure you are tired of hearing what you did wrong but here are a couple more. (1) check the spark plug Gap before installing into the engine. (2) Typically you need to measure the distance between the firewall and the face of the prop hub before drilling the holes for mounting the engine to the mount. This distance is usually part of the model documentation. If you don't, the prop may hit the cowling if there is one.
@francotavella5496
@francotavella5496 3 года назад
Bamoooooooosssss. Gracias joy estuve esperando esto hace mucho
@mylesjarvis7571
@mylesjarvis7571 Год назад
Dude I appreciate your effort here, but man this was painful to watch! Anchor that engine on a large stand so you don't need to hold it! I could see you panic when the engine first fired up. This is dangerous man, I definitely don't want to see you getting hurt but you're definitely asking for it!
@Joyplanes
@Joyplanes Год назад
Thanks!
@rickharms1
@rickharms1 Год назад
Never drill out a propeller, it will not be centered. Use a reamer, available at most hobby shops or online.
@franciscorubio8290
@franciscorubio8290 2 года назад
Congrats ,you did great, I been flying rc planes for 10 years , and I just got my r c g f 26 cc, and they work great
@pcklee
@pcklee 2 года назад
Thank you for posting. I find your video very informative. I intend to purchase my first gas engine soon and this video is really helpful!😃
@wavetwo2171
@wavetwo2171 3 года назад
Hyped for this!
@effiongekpe3256
@effiongekpe3256 3 года назад
I'm looking forward to this!
@ArobinNews
@ArobinNews 2 года назад
Thank you for posting video ,,
3 года назад
Thanks for your video 👍 I bought an NGH GT9 Pro 9cc which is great too but smaller, perfect for a 40 size plane. The stinger should be perfect for a 60 size airplane. The stinger 15cc will be my next purchase. 😉🛩️
@MasboyRC
@MasboyRC 2 года назад
Awesome, those engine looks so powerful 👍 I put the engine on the table and bolt on it to make test, its more safe and resist to vibration.
@michaelyates4646
@michaelyates4646 3 года назад
That was awesome mate! Owning, running, learning the engine...that's what it's all about really. Now, go and grab yourself a four stroke glow engine and enjoy that!
@calibermix8159
@calibermix8159 3 года назад
enjoy a dirty engine ? glow is dying out. electric is the future
@franciscorubio8290
@franciscorubio8290 2 года назад
No man , glow fuel is so expensive like 30 dls gallon ,keep with the rcgf I’m switching to rcgf engines on my planes
@fortcrafterbossbehold9027
@fortcrafterbossbehold9027 2 года назад
@@calibermix8159 A depressing future...
@Jafaarmazin
@Jafaarmazin 3 года назад
💐Thank you bro
@TyK622
@TyK622 2 года назад
Well done video ...... also you have a lot of patience. This will go along way to enjoying this hobby. I just bought a Saito FG-14C four stroke gasoline engine and have to go through the same process. But it is winter here in Ontario Canada so it will have to wait until next Spring. I will follow your steps on the engine mount and the Saito manual for breakin' Cheers and happy flying.
@Joyplanes
@Joyplanes 2 года назад
Good luck!
@cosmorito961
@cosmorito961 2 года назад
the engine is super handsome
@TomislavReskovic
@TomislavReskovic Год назад
nice vid but please switch fill/drain tube with the vent, because this way you have set up causes problems like you experienced, have to turn model upside down when filling and draining?? other way would be normal, when you fill/drain through nipple that is connected to a tube inside that goes to the bottom of the tank, and vent line goes to blank nipple in the tank, which brethes inside the top of the tank.... good luck
@musicbuilder6612
@musicbuilder6612 11 месяцев назад
They have little rubber sticks to start the engine with use that
@yf222000
@yf222000 11 месяцев назад
Damn! Here I thought I was bad at some basic safety. He’d proved me wrong. 😮
@skyartrc8286
@skyartrc8286 3 года назад
Nice engine,you can also use a chicken stick to start the engine, it's just a small stick so the prop won't strike your hand or fingers, you can make one or buy them, I also like o.s and tiger brand rc motors, they are a little expensive but very reliable too.
@Joyplanes
@Joyplanes 3 года назад
Cool, thanks
@-lolus-
@-lolus- 2 года назад
cool video . i got a chuckle while watching . to avoid complaints from neighbors , lets move to the park ... to annoy even more people XD
@Joyplanes
@Joyplanes 2 года назад
hahahaha
@user-vd2sj2kf6t
@user-vd2sj2kf6t Год назад
加油💪
@vijayakumarkona443
@vijayakumarkona443 3 года назад
Sir in my openion please try to keep the engine in a predator drone type(i.e long wing glider type of planes) which looks dam cool sir I like it very much
@franciscourena5636
@franciscourena5636 2 года назад
Great presentation Questions 1. What type of battery did you use for the servo that pulled the throttle? Voltage?
@jesweet
@jesweet 2 года назад
Lithium Polymer, from Turnigy I guess. The voltage is about 11.1VDC (3S; @3.7VDC)
@01Duke390
@01Duke390 4 месяца назад
Thank you for this video. A very detailed and excellent showcase of this engine. Explained in detail each part. Thank you :)
@MrAaa9271
@MrAaa9271 Год назад
nice
@short5stick
@short5stick 2 года назад
That is all I use now is the stinger line.
@anantyapa8115
@anantyapa8115 2 года назад
I have 15 cc os engine. By the way what is the maximum thrust of this engine.
@randyleazenby2351
@randyleazenby2351 9 месяцев назад
I agree with the comment below. A freindly ama club would have been much help. No you do not have to break it in as long as you suggest.
@erayyediler
@erayyediler 2 года назад
Do you have a new coupon?
@rizky_maison
@rizky_maison 2 года назад
How many comparison beetwen oil n gas, 1000ml gas : 25ml oil?
@thiagog.c2554
@thiagog.c2554 3 года назад
Is it possible to mount the muffler with the outlet tube pointing downward?
@reignman0311
@reignman0311 Год назад
You can mount the muffler in any position suitable for the plane u are putting it in or they sell aftermarket mufflers..
@julienlabell73
@julienlabell73 Год назад
the music you put on the first watt is it thanks
@julienlabell73
@julienlabell73 Год назад
yo
@frankyesjosh587
@frankyesjosh587 Месяц назад
Hi , what's the fuel , please ? sp98 or 95 for car with 2T oil ? Thanks for video
@albychainsaw80
@albychainsaw80 2 года назад
Where did you buy it?
@anantyapa8115
@anantyapa8115 2 года назад
How much noise it produces.
@septimusseverus252
@septimusseverus252 Год назад
Like and sub ... Awsome video bro.
@personalonly3408
@personalonly3408 3 года назад
Super I am from India
@thetoono
@thetoono 3 года назад
Me too
@wk713
@wk713 3 года назад
I am also
@parthpatil3723
@parthpatil3723 3 года назад
Semm
@Thomas--Jaleby
@Thomas--Jaleby 3 месяца назад
Me
@user-ji7pz2rb2b
@user-ji7pz2rb2b 3 года назад
Купил себе NGH 9 cc . Не могу завести, даже не буркнет. Завожу пальцем, так как не стартера. Топливо сделал как по инструкции. В че может быть проблема? Есть не большой пузырик в шлангочке от бака до карбуратора, и он не в какую сторону не двигается, я думаю может быть движок не засасывает топливо ? Помогите!
@taham6757
@taham6757 3 года назад
i kinda need help for choosing my cessna 172 rc motor plz the wing span is 100 cm the body is 55 cm the wait with battery is 440g can any one help for choosing the best motor for that
@darkiee69
@darkiee69 2 года назад
Anything in the 150-200W range will do just fine
@anishpatil3902
@anishpatil3902 3 года назад
What is thrust to weight ratio
@Joyplanes
@Joyplanes 3 года назад
I haven't tested that yet, but it will be about 3:1
@mdmuntaharul6795
@mdmuntaharul6795 2 года назад
What is the max thrust of the engine
@prabukengg
@prabukengg 8 месяцев назад
100 kilo
@Syed-zp5oi
@Syed-zp5oi 3 года назад
Hi if you want start with engine model first go with glow engine ....this cheep engines or not give good life ....best engine or OS DLE DA ....
@nicov.2151
@nicov.2151 3 года назад
nitro is old fashioned and not accepted in most rc clubs.... this is a good engine to start with.
@tray22
@tray22 2 года назад
I only have glow engines and have a hard time finding fuel. I would say start with gas or electric amd stay away from glow.
@sweateconomytoken
@sweateconomytoken Год назад
How do you control the speed?
@David-hm9ic
@David-hm9ic Год назад
He has a servo connected to the throttle on the carburetor which is operated by his transmitter. That's the normal method of controlling the speed.
@prinzvongrorgenwugs7474
@prinzvongrorgenwugs7474 3 года назад
A carburator from a chainsaw!
@ganjalfthegreen5312
@ganjalfthegreen5312 2 года назад
Does sound like one
@QuentinCarter1975
@QuentinCarter1975 2 года назад
Walbro carbs are the industry standard for 2S & 4S small engines. Bruscutters, Blowers, Saws all use them.
@homienat3374
@homienat3374 10 месяцев назад
Im sorry mate but that was not only dangerous, but brake in was wrong ,stick to the gliders mate,good luck ,try not to cut ya fingers off.
@labangeneraux5608
@labangeneraux5608 Год назад
this is hard to watch seeing him quickly flick the prop with that carb closed
@yxhankun
@yxhankun 29 дней назад
2 cycles engine
@rickknowles9620
@rickknowles9620 Год назад
I would not follow this persons precedure. Its dangerious not to have the motor jig anhored solidly and the gas tank was flopping around. Using the drill in this manor would definately damage the prop. There are much better videos on this topic.
@bashkillszombies
@bashkillszombies 3 месяца назад
$240 is very expensive for such a small motor. Never look up RC engines, find small engines by looking for small engines, or "scooter motor" or something like that. Soon as you say RC the price goes up 10x.
@robertmartian4644
@robertmartian4644 3 года назад
Put it on a bicycle.
@erfanmonemi8112
@erfanmonemi8112 3 года назад
Please be more CAREFUL
@TheVillegom
@TheVillegom 2 года назад
Your tank is upside Down
@musicbuilder6612
@musicbuilder6612 11 месяцев назад
Get a bigger propller lol
@quattro4468
@quattro4468 2 года назад
Only virgins fly electric only.
@packer34
@packer34 2 месяца назад
Dude you need a better test stand you looking to lose a finger??
@GENESUTUBE69
@GENESUTUBE69 3 года назад
Never have I seen so many mistakes in one video
@calibermix8159
@calibermix8159 3 года назад
what mistakes mister expert ?
@franciscorubio8290
@franciscorubio8290 2 года назад
So!he said it was his first time , come on ,he did great for first time!, can’t deny that!
@MrZeek101
@MrZeek101 3 года назад
I think you should have done a bit more research before posting this
@christjanehusacek4911
@christjanehusacek4911 Год назад
Nicht gut gar nicht gut 😢
@josephacosta5631
@josephacosta5631 3 месяца назад
Clearly, you are new to attempting to start an R/C engine. Presenting this video in the way you did presents YOUR process as a dangerous behavior. Read the manual FIRST. SECOND, watch a PROFESSIONALLY prepared video with regard to the SAFETY, AND STANDARD PROTOCOLS , WITH RESPECT TO THIS HOBBY SPORT. YOU, are not prepared to provide a video of this type, and therefore pose a serious risk to yourself and anyone else who believes it's a simple process. DO NOT BRING ANYMORE ADVERSE POTENTIAL TO OUR SPORT. In the last few years to many " INEXPERIENCED EXPERTS, RU-vidRS, AND " INFLUENCERS" HAVE DONE NOTHING MORE THAN TO DEGRADE OUR HOBBY/ SPORT" causing the hobby to undergo critical regulation as never before. I am a 50 year airplane/ heli competitor, judge, r/c flight instructor and professional drone pilot in the Aerospace industry. One must be a BEGINNER, before they assume enough knowledge to " INFLUENCE" others!!
@billjones3071
@billjones3071 Год назад
Glow engines are best for rc planes, gas suck also sounds like crap , stink, heavy , expensive,
@fastbow9
@fastbow9 6 месяцев назад
Qualified as the worst RC engine video on RU-vid! Should be taken down to protect viewers!
@pscparamesh3154
@pscparamesh3154 9 месяцев назад
WHAT THE STATUS OF THIS ENGINE NOW
Далее
Flite Test - The Roadrunner - 38cc Gas Airplane
20:34
Просмотров 638 тыс.
Making a 2.4cc Petrol (Gasoline) Engine
15:24
Просмотров 6 млн
Engine Upgrades and More Break In
9:27
Просмотров 9 тыс.
Getting into Gas Planes - Breaking in an Engine
8:34
Просмотров 196 тыс.
RCGF 15cc Stinger petrol/gasoline engine - fine tuning
13:11
26 RC Plane Trends That DIED
10:17
Просмотров 685 тыс.
Worlds Smallest Rotary Engine (30,000 RPM)
9:12
Просмотров 4,3 млн
Another Gas Engine? RCGF 10cc
8:52
Просмотров 17 тыс.