Grill Burner & Grease Tray Replacement (NEXGRILL)

Подписаться 1,2 тыс.

Просмотров 17 тыс.

50% 1

Burners/Igniters: amzn.to/42SlALW
Grease Tray w/ Drip Pan: amzn.to/3SK5BL6
Hey everyone, after 5 years I had to replace my burners, igniters, and grease try for my Nexgrill. Overall the process was pretty simple. Below are the steps!
Steps:
00:49 - Throw away old Heat Shields
01:38 - Find Igniter lines and detach them from Igniter Box
02:11 - Remove Igniter lines from zip ties
02:59 - Throw away old Burner Tubes
03:22 - Attach new Igniter lines to new Burner Tubes
03:47 - Set Burner Tubes in place
04:41 - Re-attach Igniter lines to Igniter Box & hide loose wires
05:50 - Test each Burner & Igniter individually
06:29 - Put in new Heat Shields
06:50 - Measure Grease Tray size
07:05 - Assemble Grease Tray
07:50 - Remove old Grease Tray
08:14 - Put in new Grease tray
08:47 - Test everything, Like, & Subscribe!
Tools Needed:
Gloves (optional)
Philips-Head Screwdriver (optional)

Хобби

Опубликовано:

23 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@m3man680 3 месяца назад

If you take the cap off the battery holder, that assembly will lower out of the tray and makes the wire replacement much easier. Great video. New grill for $35. Basically only the first two burners were bad but the replacement kit was for four burners. Of course no instructions with the kit which is why RU-vid exists.

@charlesdorra6763 Месяц назад

Thanks for your very good tips and explanations

@keamom Месяц назад

I can’t thank you enough for this! I’ve ordered all the replacement parts, so now I can do this with confidence! I LOVE RU-vid!!

@oldbegonia 3 месяца назад

AWESOME video! This is exactly what I was looking for!!! Thank you! Thank you for actually showing what you were talking about! I paid considerably more for the parts, but then mine has six burners, and I also ordered the grates. I'm kind of excited to go get 'er done!

@LetsgoBrandon-tq3mc Месяц назад

Was yours as easy as this with the starter lines? I looked today at mine and it seems they all feed in through a pipe instead of being just held on by zip ties. Also, my screws are too rusted to unscrew if I just wanted to replace the distributors and leave the lines. Any tips on getting the screws to come out when the grooves are worn out?

@kingofqueens777 23 дня назад

Great video and very detailed and explained now I will be able to replace my burners and the covers. Thank you for this video.

@sharonjohnson725 8 месяцев назад

thank you so much for making this!!! made it so easy!!

@Richard-cw7ko 2 месяца назад

Thanks Stephen

@celsoglima 3 месяца назад

I know this video is a bit old, but for future reference by anybody reading this, line-up your grill box with aluminum foil and replace the aluminum foil every year or two. I have been doing that for a while now which has extended the life of my grills considerably. The grill in the video unfortunately went way too long without any maintenance considering the large hole in the grill box/bottom/grease pan. I am a Char-Broil customer, and I get most of my parts directly from them, and all grill brands offer the same, so that you can get original parts.

@vincemoney942 6 месяцев назад

Good tips. Just changed mine

@phukobama1215 3 месяца назад

great video

@MrXcbravo 3 месяца назад

Great vid , I didn’t even know you can replace that pan , mines not so bad . Took it out cleaned it and wrapped it in aluminum will see how long it last

@scowell 7 месяцев назад

Yes! Steak tonight! Yours is actually way more gone than mine. I bought the stainless kit, we'll see how it works. Looks like my drip pan is just a little better... I'll dump it and put it back in.

@scowell 7 месяцев назад

I had to assemble my burners... bolted the ignitors on, just like original. Wiring the sparker is much easier if you cut the cable ties and remove the box from the panel... just unscrew the button, take out the battery, and unscrew the big plastic nut. Also, if you leave the back one in, you don't have to put it back... it's the side burner. My kit was a little more expensive, I got new grills with ceramic coating. Thanks for posting... liked and subbed!

@Henry_Jones 11 месяцев назад

I have that grill. Its been sitting outside uncovered in massachusetts all year since 2019. No rust yet but the ignightor box broke so i use a trigger lighter and the regulator hose broke and those are a cheap and easy replacement. My only beef is it doesnt drain grease well so it needs constant cleaning to prevent grease fires (you can see its flat around the drain hole where grease and crud builds up making a little dam.) How is yours with the aftermarket grease pan?

@scowell 7 месяцев назад

Looks like there's no drain... my little catch pan rusted out years ago... the grease burns away anyway.

@vivcolon9819 2 месяца назад

I am trying to separate the grill from the bottom part and having problems doing it. I want to recycle it and do one of those fancy stone ones but not sure how to disassemble.