GTO CROSSMEMBER, CONTROL ARM BUSHINGS, VIKING SHOCKS GFORCE AXLES+DIFF BRACE INSTALL AND MUCH MORE

Подписаться 2,7 тыс.

Просмотров 4,9 тыс.

50% 1

In todays video we finish completely rebuilding the GTO's rear suspension. we get the car back together and on the ground, we are getting this car closer and closer to being ready for the engine and most importantly BOOST!!!
FOLLOW ME ON INSTAGRAM
Bought2Buildofficial
/ bought2buildofficial
yellow_hellcat1
/ yellow_hellcat1
PARTS USED
Viking Rear Shock, Double Adjustable Part Number: VIK-B229
www.bmrsuspens...
GForce Engineering Renegade Axles SKU: GTO10125A
gforce1320.com...
GForce Engineering Level 2 28 Spline, 1-piece Inner Axles Stubs, LH and RH SKU: GTO10117A
gforce1320.com...
GForce Engineering Heavy Duty Dual Bushing Diff Mount SKU: GTO10325D
gforce1320.com...
THEY NO LONGER SELL MY PROFAB TOE ARMS I WOULD HIGHLY RECOMEND THESE AS A FANTASTIC ALTERNATIVE
GForce Engineering Heavy Duty Adjustable Toe Rods SKU: GTO10501A
gforce1320.com...
Pedders Heavy Duty Rear - X-Drag- spring Part Number: PED-7843
pedders.com/co...
Super Pro, Bushing Kit, Rear Cradle, Race (Pair) Part Number: SPF-3367K
www.bmrsuspens...
THESE ADJUSTABLE CONTROL ARM BUSHINGS SAY THEY ARE FOR TOE BUT IF YOU PUT THEM IN THE SAME LOCATION I DID THEY WILL ADJUST CAMBER
Super Pro Bushing Kit, Rear Control Arm, Adjustable Part Number: SPF-0877TK
www.bmrsuspens...
Super Pro, Bushing Kit, Rear Control Arm (Pair) Part Number: SPF-0611K
www.bmrsuspens...
Super Pro, Bushing Kit, Rear Sway Bar End Links Part Number: SPF-0513K
www.bmrsuspens...
Energy Suspension Front Sway Bar Bushings - 28mm (1.10 inch) Part Number: 3.5210
www.energysusp...
Whiteline Rear Sway Bar - Mount Bushing 16mm SKU: W21484G
whitelineperfo...
RUSSELL STAINLESS BRAKE LINES - 2005-2006 Part Number: 692320
wretched.co/692...
PowerStop Z26 STREET WARRIOR BRAKE UPGRADE KIT Part No. K2893-26
www.powerstop....

Опубликовано:

20 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@andresschmittle8272 Год назад

Awesome video. Subscribed

@SSPOrangeGTO 8 месяцев назад

Late to this video, but axles look just like my "Drive-shaft shop" axles for the GTO...might be from there...

@bought2build 8 месяцев назад

Thanks for the input! Guy I got the roller from said they were Gforce but who knows lol thanks for the support 🤟🤟🤟🤟🤟🤟

@evsnova74 2 года назад

Kinda wish I would have removed my rear sub frame for the stabilizer bar install. Btw imo with poly bushings it doesn't matter if you torque em at right height. I torqued mine down and was able to move them through their full range of motion without them wanting to return to the position they were when I tightened them. I should have gotten that differential mount, I just used a Whiteline poly insert. The gforce looks like a good middle road between that and a Harrop. Lol that 72lb ft for the rear end links is from the manual. I wonder how many dealerships broke those bolts early on.

@bought2build 2 года назад

Good to know about the ride height thing it sounded plausible so I went with it And yeah exactly my thoughts great middle road for the g force brace I have been happy with it so far And yeah 72ftlb kinda made me lol

@evsnova74 2 года назад

@@bought2build I did it at ride height when I did coilovers last year. And I still do it with the rear shocks too. I just finished up on the rear suspension a few months ago, wish I could have seen this video first. It wasn't bad once I got into it but I kept putting it off all winter because I didn't know what I was doing.

@bought2build 2 года назад

@@evsnova74 I hear ya and totally understand that I’ve got some cool gto videos in the works just did one on the melling high pressure oil pump and CHE TRUNNION upgrade I’m in the middle of doing one on the full custom fuel system I made and some other fun stuff 🤙🤙

@evsnova74 2 года назад

@@bought2build right on I just subbed. I'm still surprised how I'll find someone on here putting GTO content up that I haven't seen yet. I've got the ctsv brembo brakes videos up, all suspension, and right now I'm editing headers videos so the rest of those will come out in the coming weeks.

@bought2build 2 года назад

@@evsnova74 awesome man! Yeah I kinda just rolled the headers and a bunch of other stuff into the next video of mounting the intercooler and finalizing the blower and stuff

@hoonaticbloggs5402 2 года назад

Did you not align the rear subframe? It will crab all over the road if not. There Is an alignment tool

@bought2build 2 года назад

I did the same thing I did on the last GTO Polly bushings and then just checked it with measurements I’ve had a few GTO’s and haven’t used the tool thanks tho 👍👍

@goat_life254 Год назад

I upgraded from this setup, with bc shocks not Viking, to the gforce/strange coilover. And now I have wheel hop. Tried all kinds of different settings and nothing helps reduce the hop. I have an extra set of rear control arms with dba rotors already on them, I’m going to go back to this setup and sell my gforce setup.

@bought2build Год назад

Damn that’s annoying! I wanted to go to a coilover setup what axles are you running?

@goat_life254 Год назад

@@bought2build poly bushings everywhere, harrop cover, Dss anti hop axles and stubs, gforce toe rods. Everything to eliminate hop, with the pedders springs and drag bags I had none. I hate the gforce coilovers 🤬

@bought2build Год назад

@@goat_life254 damn bro I’m sorry to hear that! That’s sooo weird because soo many people have great luck with them

@goat_life254 Год назад

@@bought2build only reason I can think of was they were supposed to have 350# spring’s which weren’t available so I got 325#. But do I really want to throw more money into this setup?

@cpzmelbs 5 месяцев назад

What setup did you go back to mate Or did you find any specific cause and a fix? Nightmare lol

@BenTheAVGNFan 2 года назад

Where did you find those viking shocks? I want to upgrade from the koni yellows

@bought2build 2 года назад

I got mine from BMR but just a heads up even tho they say direct replacement you may need to get a 1” or 2” extension depending on your ride height with mine with the drag springs and what not I had to run a 2” extension because they are almost maxed out I called Viking to ask them what they recommend and that’s what they told me so they sent me a set of the extension’s other than that tho I have been extremely happy with them Here is a link to where I ordered mine m.bmrsuspension.com/?page=products&productid=1205&CFID=203619&CFTOKEN=55ffe209317f0f9e-2B159D39-F3E4-1255-EB843B705F6FCD9A

@BenTheAVGNFan 2 года назад

@@bought2build Gotcha I have the Pedders zero drop drag springs. Thanks for the info also last question I had to run a tap through the lower shock mount so I always run a nyloc nut on the other end with the Viking I know you have spacer there but is there enough threads on other end for a nut? Or would I need to seek a longer bolt then what the shocks come with ? Thanks again

@bought2build 2 года назад

@@BenTheAVGNFan oh ok not sure what the ride height for the zero drop springs are. I run the pedders X-drag springs they are actually a bit of a raise so I needed the extension you may or may not honestly not sure with your spring. If you need to be able to get a nut on the back side you may have to get a longer bolt. Personally I would try to find one that has the shank where the shock eye will sit, instead of using a fully threaded bolt just because where it rides it could roll over/crush the threads slightly. Although it may not really matter for any other reason but if that happens it may create a little slop between the bolt and eyelet and the less movement the better in my opinion best of luck! 🤟🤟