Тёмный
No video :(

Hack a String Trimmer - this rips stuff up 

Dialed In DIY
Подписаться 25 тыс.
Просмотров 390 тыс.
50% 1

Hack your tools. This string trimmer hack turns a flawed lawn care tool into an awesome destroying machine (instant mulch!). Yes, my inexpensive Harbor Freight string trimmer quit working right so I hacked it. With this mod it now works better thank my Black & Decker string trimmer (check out the side by side comparison in the first demo / test). This machine modification is easy & doesn't cost much. In this video I even turned small tree branches into instant mulch; something this trimmer could never come close to doing before. I expected this to work well but it is awesome beyond my expectations.
Key materials:
1. 4 strand, 20 gauge, galvanized utility wire/cable (found in the hardware section of a local hardware store)
2. 1/2" (12.7 mm) Grommets. I used Gardner Bender part # GHG-1550 (found in the electrical section of a local hardware store)
While I've had allot of fun testing, modifying & testing this hack even more I would be remiss not to mention again the dangers of this sort of machine adjustment. You could damage the trimmer or possibly even get hurt if you are not very careful. Always wear the necessary protective gear. Know your surroundings and watch your angles. Don't try this around people, animals or delicate items (ex. decorations). There is a risk of dislodged, flying pieces of steel cable (so be cautious and prepared at all times).
Music by Purple Planet
www.purple-plan...

Опубликовано:

 

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 582   
@gazurtoids1
@gazurtoids1 Год назад
this is a great way of getting rid of unsightly cardboard boxes that grow in your garden
@rociovillegasmartin9897
@rociovillegasmartin9897 Год назад
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. ru-vid.comUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
@bobsoft
@bobsoft 7 месяцев назад
Spamming channels about string trimmers? I see this copy and paste all over.
@pd4252
@pd4252 4 года назад
The twisted wire was already starting to untwist after the first use. The wire needs to be made untwist-able with solder or possibly hot-glue. If the wire untwists, it will probably fly out at some point.
@DialedInDIY
@DialedInDIY 4 года назад
It will indeed separate and fly off much the same way regular line flies off. That is why I have always been cautious to watch my angles, make sure the trimmer guard is between me and the line and make sure that nobody is close by. Thanks for watching a taking time to post your comment!
@robc26
@robc26 Год назад
I've soldered the end bit on both sides of the cable, seems to be holding up well
@neilcrompton3488
@neilcrompton3488 8 месяцев назад
Flux & solder,flux will make it easier.
@HeraldTubeman-ve1jr
@HeraldTubeman-ve1jr 29 дней назад
To make wire that won’t in twist look at how to make yo yo string lmao
@anthonycromer7101
@anthonycromer7101 3 года назад
Man you just saved me some money i was about to order and replace the head with the strongest line i could find you are a Genius and i really mean that . Thanks alot
@DialedInDIY
@DialedInDIY 2 года назад
I appreciate the feedback and the extremely kind words. One thing is for sure... I have allot of fun doing this kind of stuff. Thanks for taking the time to watch my video and post a comment.
@derrickpretzer5465
@derrickpretzer5465 Год назад
😊
@blacknight1003
@blacknight1003 2 года назад
Ive been scratching my head trying to figure out how to utilize my old strimmer as the plastic line seems to run out quicker than I can replace it. Thanks for the hack - I’m going down the shed now to try this out.
@highwayempire1
@highwayempire1 6 лет назад
I have the exact same trimmer w the exact same problem. You just changed my life.
@DialedInDIY
@DialedInDIY 6 лет назад
Awesome, thanks for the feedback. I am experimenting to figure out a type of wire/cable that will last even longer before it snaps off. I tried a couple of viewer suggestions (including clothes hanger) which worked great but did not last long enough. If you try it out, I'd love to hear how it turned out for you. Thanks again for the comment and for watching my video!!
@LetsGoFlyers2011
@LetsGoFlyers2011 5 лет назад
@@DialedInDIY How about insulated electrical wire? Maybe the coating will keep it from fraying.
@DialedInDIY
@DialedInDIY 5 лет назад
Thanks... I like the idea. I'm adding that to my list of viewer suggestions to try out.
@LetsGoFlyers2011
@LetsGoFlyers2011 5 лет назад
@@DialedInDIY Or speaker or old telephone wire. Still braided and flexible, but insulated to stop the fraying.
@LetsGoFlyers2011
@LetsGoFlyers2011 5 лет назад
@@DialedInDIY Kinda sucks, I just put a munch of old telephone wire out to the trash a couple weeks ago, after holding on to it for years. This is why I'm becoming a hoarder.
@waynestiff8565
@waynestiff8565 4 года назад
I tried this on my black+decker string trimmer and it worked great!!! Awesome idea, thanks!!
@DialedInDIY
@DialedInDIY 4 года назад
Very nice... so glad to hear the feedback. I appreciate you taking time to watch the video and post your comment... oh, and you are very welcome!
@johnnytranna
@johnnytranna 5 лет назад
I've attempted braided aircraft cable and found very quickly it just comes unraveled and eventually deteriorates. My second test was with solid stainless steel thread. This stuff was amazing. Awesome for just plants and tall grasses. Both in the open and up against patio stones and rocks. I would be very careful around trees as this is equivalent to a saw blade.
@DialedInDIY
@DialedInDIY 4 года назад
Thanks so much! I really appreciate the feedback and you taking time to watch my video and post your comment! [Sorry for the delayed reply. I just found a large volume of comments that never showed up in my main notifications list]
@samhallowsdc
@samhallowsdc 2 года назад
John I had the same issue with the recommended method. Cable unraveled and then the first stone or brick it hit the cable broke off right at the outlet hole of the trimmer. Tried this technique 2x and same outcome. On to a different line trimmer hack approach for me. THX for the idea and video tho! Very well made.
@daviley3252
@daviley3252 Год назад
@@DialedInDIY can you make a replacement for the ozito bladed trimmer and how you can make it into normal line please
@apepex
@apepex 2 года назад
I’ve read some of the comments and I think soldering or putting super glue on the wires will help the splitting when in use, this is a great hack!
@DialedInDIY
@DialedInDIY 2 года назад
I thought I replied to this before... so sorry either way; if I am really late or if you are getting a second response. I will add that to my list of experiments to try with this hack (I've got a great add on list now). Thank you so much for watching and taking the time to comment.
@NoseyNana
@NoseyNana 6 лет назад
That's so nice you let your landscaping get overgrown for this hack, hehe. One thing is for sure, the cleanup after isn't fun at all. One caution! Some years back I got a solid metal disk as a replacement for the string & the results were similar. Things really do get thrown around & the use of safety glasses can't be stressed enough. Also, just in case you get clumsy or thrown off balance, wear some closed toe shoes or boots, I learned that from the regular string trimmer :)
@DialedInDIY
@DialedInDIY 6 лет назад
Thank you very much, and yes... that is exactly what I did, let it grow out so I could make the video (LOL). So true about your safety recommendations!! I was originally going to do something similar to the disk replacement you mentioned but I was not sure how I could do that and make it safe enough for others to potentially replicate as a DIY solution. Was the disc replacement available to purchase like that? Was it metal? I appreciate you taking the time to comment and to watch my video! Thanks again.
@dondale68
@dondale68 3 года назад
I was running an un-modified electric weed trimmer and got a piece of grass shot into my eye (got it out,, no damage) Safety Glasses are a MUST, even sun glasses work better than nothin!
@randalllewis2434
@randalllewis2434 Год назад
This is really a great hack!! I’ve put liquid solder on the cable, and it’s helped quite a bit!! Great idea!!
@Swenser
@Swenser 2 года назад
It took me a while to figure out why my line trimmers were not feeding. You tube videos never addressed what I found. After opening up mechanism and sanding all the plastic notches guides and surfaces and oiling , it worked. Of course follow all the RU-vid guides to wind in right direction and choose correct string diameter.
@DialedInDIY
@DialedInDIY 2 года назад
That sounds like a great fix... thanks for sharing that. My trimmer had some other issues that would have required replacing some of those parts and I was not too keen on that because it was kinda cheap to begin with. I will have to remember that for my remaining (good) trimmer. Did you sand the teeth to make sharper angles?
@Swenser
@Swenser 2 года назад
@@DialedInDIY just a random rub around with sandpaper. I tested the mechanism by hand, pushing and turning until it seemed to free up more smoothly. It will feel right once freed up.
@DialedInDIY
@DialedInDIY 2 года назад
@@Swenser That makes good sense. Thanks for the follow-up.
@MorticiasWorld
@MorticiasWorld Месяц назад
YO! This is freaking awesome!! Thank you so much! I’m also going to follow the soldering tips from others as well. If this saves me a lot of time and frustration, I’m going to be one happy chick!
@nc3826
@nc3826 2 года назад
Thank, you, I love the simplicity and versatility of the method you used for your mod. It will be great for me, to first test, if a soldered version of the cable/wire version., Will last long enough. To make it worthwhile, to make (or modify an online version) of an adapter that holds the wires.... Which is a faster way to change the wires, when they wear out....
@islandantoinette
@islandantoinette 4 года назад
Am I glad I kept watching videos. I had been trying to make the Echo 400 Universal work on a Black and Decker String Trimmer. Seems it has attachments / adapters for everything BUT a Black and Decker it is one axle you can not just put an adapter on. I don't know why still. They have the motor on there then they have a bushing and lock nut. But there is also a plastic gear wheel. So instead of ruining my brand new string trimmer I am just going to go get these parts you talk about and take out the refill spool that is the bump head. I had for the past year been using the handle feed and I literally had to open the cap head up every 30 SECONDS TO GET STRING. I DID THIS FOR A YEAR UNTIL IT BURNED UP AND I LOST MY MIND!!! I am old and can no longer hold the gas or battery pack ones. I sure hope this works! Thank you in advance for some reasonable work around. Antoinette
@DialedInDIY
@DialedInDIY 4 года назад
Thank you so much for the great feedback. Hope all goes well with your trimmer hacking! I was doing the EXACT same thing with my trimmer (every 30 seconds) which is what led me to the hack. Just a tip; some people have found that trimmers with more power snap the wire quick using the gauge I did in the video. If you have that happen with the B&D then try a bigger gauge wire.
@daxinventor3542
@daxinventor3542 4 года назад
Perfect solution for my Harbor Freight electric weed wacker. I plan on stepping it up even more because I cleared an acre in back of my house and after clearing it of brush I now have small tree stumps. I think I can modify the weed wacker and install a circular wood blade which should work very well. Good job. Your video is great.
@DialedInDIY
@DialedInDIY 4 года назад
Thank you very much for the feedback. The circular blade is what I really wanted to do but I did the cable for video purposes. I'd love to hear how the blade turns out and what worked for attaching it securely. If you make a vid let me know and I will watch it!! Thanks for watching and posting!
@skylark9982
@skylark9982 2 года назад
I'm going to try and use wire in Drill at low speed with holding caple with pliers to tighten Wire cable. And wrap wire around cable like you said to strengthen it Plus I think one of the comments about glue or Soder will help a little and then wrapping Duct Tape around Cable twist will help a little with cable unraveling Thank you for tip 👍
@Shorty_Lickens
@Shorty_Lickens 3 года назад
I've often fantasized about this, but never knew how to do it safely. Now I know the secret: GROMMETS!
@DialedInDIY
@DialedInDIY 3 года назад
Its all about the grommets... which by the way is something very different in beach communities (lol).
@Crazy8ts
@Crazy8ts Год назад
Possible to throw pieces of the cable out if it gets frayed, then your dealing with little metal strands sticking into your legs/feet or worse your eyes and face. There's a reason these dont come with metal line.
@jacko0595
@jacko0595 3 месяца назад
Absolutely true. This sort of stuff can be very dangerous
@petestreet7535
@petestreet7535 Месяц назад
Or maybe they want you to keep buying their string? Business 101.
@forgotten_islander4530
@forgotten_islander4530 Месяц назад
I’d rather deal with the potential of these stands hitting your legs (I mean why aren’t you wearing long pants and boots when trimming anyway) than a wire wheel when buffing welds 😂
@Married2Jamaica
@Married2Jamaica 19 дней назад
so keep buying your string even though you sound like a string seller 😂😂
@guyh.4553
@guyh.4553 6 лет назад
I've often wondered about using some kind of metals. We have 3 weedwhackers here. Time to play!
@DialedInDIY
@DialedInDIY 6 лет назад
I have had some serious fun experimenting with this one! My main caution to anyone trying this is to make sure to stay behind the trimmer head and definitely make sure nothing living is anywhere near when in use; flying shrapnel (but I'm guessing that warning is not needed for you given your user pic/image). Thanks for the comment!
@jhm2112
@jhm2112 2 года назад
I did this wrong the first time I tried this hack because it had been awhile since I watched your video and thiugh I remembered right. I put the wire directly on the shaft and put the grommet over it. In less than 5 minutes, the wire fell out. I rewatched your video and did it right this time. Works great, thanks! Instead of spending 6-8 dollars on the cable, I had a few feet cut at Homedepot at .36/ft. The grommets cost more than the wire.
@DialedInDIY
@DialedInDIY 2 года назад
Thank you very much. So glad to hear you tried it and liked the results. Thanks for taking the time to watch my video and post a comment.
@TheGhost-gx5vd
@TheGhost-gx5vd 5 лет назад
What a brilliant fantastic idea your my hero I have all the stuff in the garage so I'll be converting my 2 strimmers THANK YOU VERY MUCH, Geoff over the pond in England
@DialedInDIY
@DialedInDIY 5 лет назад
Thank you so much for the awesome feedback! Hope it works out well for you... I'd love to hear about your results.
@brandonb.8159
@brandonb.8159 5 лет назад
Thanks. I was tired of fighting with my weed eater in extreme heat this is a life saver
@DialedInDIY
@DialedInDIY 5 лет назад
So glad you liked the video. I appreciate you taking time to comment after watching!
@MrTOMMYLEE6969
@MrTOMMYLEE6969 4 года назад
Man ..I'm trying this..I'm a DIY man and you just made me laugh...in a great way...thanks
@DialedInDIY
@DialedInDIY 4 года назад
Awesome! Thanks so much for the comment (and for watching)
@melissapeck3089
@melissapeck3089 4 года назад
I'm a d i y er too! ! & going to try it out in a few minutes. ..
@DialedInDIY
@DialedInDIY 4 года назад
@@melissapeck3089 I'd love to hear how it turned out for you. Thanks for taking time to comment, I appreciate it!
@CorbinAce
@CorbinAce 5 лет назад
I'm imagining the uncoordinated guy that keeps on hiting the siding on his house or garage with the wire setup. After three trimmings his house or garage will be an inch shorter. :O)
@dimitar4y
@dimitar4y 5 лет назад
HAA
@DialedInDIY
@DialedInDIY 5 лет назад
Love the mental image... too funny. Thanks for taking the time to post up!
@Blinker_Fluid_Supply
@Blinker_Fluid_Supply 4 года назад
That would be me 😂
@davidreynolds4684
@davidreynolds4684 4 года назад
That would make a good scene in a jim carey movie. Guys weedeating with a modified alcohol fully blown big block weedeater. Cuts the lower plate off the corner of his house or better yet. Gonna tidy up stonehenge. Grounds keeper remodels world treasure. Stonehenge now gravel pit. The vicarious liability would bite me in the arse.
@DialedInDIY
@DialedInDIY 4 года назад
Love that plot scenario. I'd watch that!!
@Christopher-Cairns
@Christopher-Cairns 3 года назад
Good job. I saw another video where a similar setup was done only difference is the guy soldered the cable sections that do the cutting. Lasted well and did not fray easily.....👍👌
@DialedInDIY
@DialedInDIY 3 года назад
Thank you so much for sharing the tip... I am going to have to try that. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@roblockyer337
@roblockyer337 3 года назад
This is a great idea, I had some cable so tried this fix without the grommets and the cable lasted less than a minute before breaking free. I will try grommets at the weekend when I get to the shop
@DialedInDIY
@DialedInDIY 3 года назад
I'd love to hear how it turns out if you get a chance to come back with an update. Just as a thought too... I have found that higher torque trimmers are harder on the cable so it requires some beefier cable. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@misskitty8510
@misskitty8510 5 лет назад
Wow! Awesome! Forget breaking strings and time-consuming restringing!!! 😉👍 You could dig a hole with that!!! 😁
@DialedInDIY
@DialedInDIY 5 лет назад
Lol.... it actually does chew into dirt fast so I think you are right (I might even try digging a hole that way just for fun). thanks so much for the great feedback/comment!
@misskitty8510
@misskitty8510 5 лет назад
@@DialedInDIY Hey, just watch them toes!! I thought of that when I hit the tip of my shoe with my string trimmer! Wear steel toe boots! 👣
@DialedInDIY
@DialedInDIY 5 лет назад
@@misskitty8510 very smart suggestion!!
@Gregory_TheWatchman
@Gregory_TheWatchman 4 года назад
I have a Black n Decker weed eater that I'm going to modify to get the beast eater that you created. After modifying, I'll have the dual cutting action which I'm sure is better. This will be a fun project for getting some serious lawn work done around my home. Thanks for posting.
@DialedInDIY
@DialedInDIY 4 года назад
Thanks so much for the feedback... and taking time to watch my vid. I'd love to hear how your hacking efforts turn out with the weed eater.
@Joe-kb1sm
@Joe-kb1sm 3 года назад
I did mine with coat hanger five years ago, still going strong.
@DialedInDIY
@DialedInDIY 3 года назад
Just got added to my list to test! I love that idea... thanks so much for taking time to watch and post a comment.
@motorhead3153
@motorhead3153 3 года назад
Going to try that tomorrow I'm sick of having to put new line on my trimmer every time it breaks
@DialedInDIY
@DialedInDIY 3 года назад
Did you get a chance to try it? I'd love to hear how it turned out.
@motorhead3153
@motorhead3153 3 года назад
@@DialedInDIY I did but it was with cable from a box trailer lol bit too thick.... The trimmer head was vibrating like crazy I'll have to try the thinner cable
@tonfan
@tonfan 4 года назад
Thank You! You are a God among men! This is perfect....I need the cutting power for an electric wacker, as I hate messing with gas-powered models
@DialedInDIY
@DialedInDIY 4 года назад
You are too kind my friend! Thank you so much for the great feedback and for watching my video. I agree re the gas-powered models too.
@handiman5
@handiman5 4 года назад
Love your 'destructive' attitude!! Arrr-arrr - more power is what we need! Great hack! Thanks.
@DialedInDIY
@DialedInDIY 4 года назад
Thank you so much for the great comment... and for watching my vid. Hope all is well!
@TheSAMMY79
@TheSAMMY79 5 лет назад
that little this is a beast after modification......i can see the grass are crying already...r.i.p lol
@DialedInDIY
@DialedInDIY 5 лет назад
LOL.... yes, and I have had fun seeing what I can destroy with it (for scientific testing purposes only, of course). Thanks for watching and taking the time to comment!!
@roberthanania3129
@roberthanania3129 3 года назад
This video is great ! I bought the parts and can't wait to try it out.
@DialedInDIY
@DialedInDIY 3 года назад
Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment! Turns out I got to reply to this and the post test feedback on the same day (oops). Thanks again!!
@nrnoble
@nrnoble 2 года назад
This a great DIY concept, but like others who have tried it, the wire lasts 30 - 90 seconds before needing to be replaced. In my case the whipping of the of the wire quickly creates a joint at entry the hole that causes the wire to weaken with each rotation. At the rate of 100s rotations per second, it does not take long for the braided wire to break off at the joint.
@nc3826
@nc3826 2 года назад
soldering the cable, will make it last much longer.... , and it only lasts 30 seconds, when it is used against abrasive surfaces like concrete, which a plastic line would only last 1 second before more line would be needed to take its place....
@erwin643
@erwin643 4 года назад
Man, that is just mean, evil and destructive. I love it!
@DialedInDIY
@DialedInDIY 4 года назад
They had us in the first half, not gonna lie. LOL... thanks so much for watching and taking the time to comment!
@stforgione
@stforgione 5 лет назад
i was setting up my trimmer to do the same with wire rope , however i will silver solder the ends or even the whole string!!! thank you for yours !!
@DialedInDIY
@DialedInDIY 5 лет назад
Thanks so much for the feedback... I appreciate you taking the time to comment after watching the video!
@davidreynolds4684
@davidreynolds4684 4 года назад
I did the solder thing on the ends once. In theory its a good idea. In actuality youre making shrapnel. The bending flexong and centripetal force on the cable will dislodge the silver solder and youll end up in the emergency room getting metal removed from your shins. Or some kid will lise an eye 3 blocks away.
@Billynicho
@Billynicho 4 года назад
@@davidreynolds4684 haha.i nearly understood that.i use plastic coated cable and melt the ends.and into middle I take an inch or so of the coating. And fo what you did..
@davidreynolds4684
@davidreynolds4684 4 года назад
@@Billynicho ferrels work great if you find the sweet spot tightening them down. Little barrell ferrels with twin allen screws tightened down in the center cap will last a while if you screw around and crank them too much the cable will break pretty quickly. Not tight enough and youll lose a foot or your junk! I know for a fact the last time i was at our lake house in whitney texas i found the corded weed eater i kodified when i was 11 maybe. It still had the same leaders in it . I have replaced tge split weights out over the years. Thats what i secured the cable with and it has held.
@davidreynolds4684
@davidreynolds4684 4 года назад
We should get a club together. We could call it the league of extraordinary dumbasses. We could have gatherings at various parks around the us and cut the grass. Wed be able to recognize a fellow brother or sister as tgey will be missing varioius limbs hace eye patches and horrible garot cable scars over the body parts still there. That would make a funny ass video
@girishmodi2714
@girishmodi2714 4 года назад
Instead of galvanized wire as you suggest, I used plastic coated picture wire and got better results
@DialedInDIY
@DialedInDIY 4 года назад
That is a great idea. I am going to add that to my growing list of alternatives to try out. Thanks for watching and sharing your idea!!
@pattiannepascual
@pattiannepascual 3 года назад
I ran out of string during a job,had some rebar wire,it worked well.
@DialedInDIY
@DialedInDIY 3 года назад
Rebar wire!.. great idea. Thanks for taking time to post the idea!
@theBiv3
@theBiv3 5 лет назад
I think the only caveat not mentioned are possible sparks thrown when hitting rocks and concrete. You should pay attention in case you have to stomp out a small fire. Or maybe have a bucket of water handy.
@DialedInDIY
@DialedInDIY 5 лет назад
You have a good point and it is one I watched for very carefully. Turns out the risk was far less than the metal toothed edgers (can't remember what they are really called) and even more so when it comes to lawn mowers. Thanks for watching and taking the time to comment!
@saadalexan
@saadalexan 5 лет назад
Great hack! I was about to return the same trimmer since the strings keeps getting tangled. I was looking for some steel attachment for this type of trimmer but nothing to be found! Thanks for the hack, I think it is a great idea!
@DialedInDIY
@DialedInDIY 5 лет назад
Thank you very much for watching and taking the time to comment! I really appreciate it.
@maplecanuck6454
@maplecanuck6454 5 месяцев назад
Element of danger---yes. Possibly diminished by applying short pieces of heat-shrink tubing from grommet out---- minimizes unraveling ; lessens wear at pressure points
@coldsoldier313
@coldsoldier313 4 года назад
Wow! Here I am thinking that my quad string hack was destructive. Thanks👍🏾
@DialedInDIY
@DialedInDIY 4 года назад
Ooooh... I like the sound of Quad String Hack. How did you rig that and did you use regular string trimmer line? Thanks for watching and posting your comment.
@tonyrome068
@tonyrome068 4 года назад
I sliced sheet metal into two small blades and replaced the plastic ones on my Ryobi attachment. Its like a Ninja now
@DialedInDIY
@DialedInDIY 4 года назад
Have you used it in the weeds yet? The kid in me is giggling with the prospects (I've wanted to do that too).
@Vreguleift
@Vreguleift 3 года назад
I have the exact same model, and when it starts to go, I'll be putting my metalworker skills to use. I wanna see what I can Frankenstein-up, and a whirling blade sounds perfect.
@hithere2742
@hithere2742 3 года назад
Thanks for this, it lasts so much longer and takes way less time to cut everything.
@DialedInDIY
@DialedInDIY 3 года назад
Awesome, I really love the feedback. So sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@my2centz196
@my2centz196 5 лет назад
This is a fantastic idea which I've almost done before but was a bit nervous. My weedeater goes through so much string its crazy. I do have quite a bit of weeding but I have to restring it at least twice but lately three times which is a pain. I've thought about purchasing a few replacements so I can have them strung up and ready to go before use but still I've been thinking of using some wire which I have laying around already. I was thinking more along the lines of making knots then this but seeing how it seems to work well I'll try it. Thanks
@DialedInDIY
@DialedInDIY 5 лет назад
It is a pain when it chews through the nylon line real fast. If you get a chance to try it out I'd love to hear how it worked for you!
@my2centz196
@my2centz196 5 лет назад
@@DialedInDIY it definitely is a pain for sure. The last thing you want to do when you're weedesting is stop every 15min and replace it. I'll be sure to give an update.
@jack765ful
@jack765ful 4 года назад
You, sir, have created a very lethal weapon...
@DialedInDIY
@DialedInDIY 3 года назад
Very lethal for plants that is for sure... but also, a modification that warrants caution too. Thanks for taking the time to watch and post a comment.
@donwardareyouawake379
@donwardareyouawake379 6 лет назад
That is to fancy but I like it..... A simpler way is take 2 pieces of tie steel wire twist one end to stop it from pulling though the holes cut to length put the cap back on and you are ready to get some work done. Be careful not a toy it will take a finger or toe off with no problem. The skill saw mod is my favorite it will cut though a 2 inch branch no joke or your leg. Thank you for posting this video.... Take care and have a great day everyone......
@DialedInDIY
@DialedInDIY 6 лет назад
Thank you very much for the comment and feedback! I love the saw mod... my original plan was a circular saw blade (if that is what you meant) but I had visions of someone trying to copy it and having the blade fly off after getting up to speed and then bouncing like a Tasmanian Devil destroying everything and everyone around. Don't get me wrong... I am still going to try that mod I just haven't decided if I will make a video of it or not. PS: love your simplified version (I will try something like that also)!
@donwardareyouawake379
@donwardareyouawake379 6 лет назад
Dialed In DIY need a don't try this at home disclaimer.. Take care.......
@bridgendesar
@bridgendesar 6 лет назад
I was thinking coat hanger wire looped around the center shaft!
@DialedInDIY
@DialedInDIY 6 лет назад
Another awesome idea! Thanks for the feedback... I am actually going to try out both of these suggestions this weekend. Looped wire is quicker but hanger will last much longer (and possibly more devastating). Thanks for watching and for the comment/suggestion!!
@DialedInDIY
@DialedInDIY 6 лет назад
Hanger was definitely more devastating but it didn't last nearly as long as I had hoped. BUT... it cut straight through PVC. I'm going to see if I can figure a way to get it to be more durable.
@neilfroggycrompton2466
@neilfroggycrompton2466 5 лет назад
Could also try soldering about 10 mm of the tips of the cable to make cable stronger & prevent it shredding the fibres & unravelling,but do it with the grommet removed as there will be heat transfer along the entire length ☺
@DialedInDIY
@DialedInDIY 5 лет назад
Great suggestion. I have had some similar responses... I'm going to have to give that a test sometime. Thanks for watching and for commenting!
@TheGailRose
@TheGailRose 3 года назад
Genius! What a great solution, thank you!!
@DialedInDIY
@DialedInDIY 3 года назад
Greatly appreciate the kind words... thank you for taking the time to watch and post a comment.
@nickolasgus2711
@nickolasgus2711 3 года назад
pro tip : watch movies at Flixzone. Been using them for watching a lot of movies during the lockdown.
@mackalfonso7423
@mackalfonso7423 3 года назад
@Nickolas Gus yup, I've been using flixzone} for since november myself =)
@lionelopittmanjr
@lionelopittmanjr 3 года назад
Nice I am trying to add a grinder brush to my trimmer
@DialedInDIY
@DialedInDIY 3 года назад
Great idea... i recently saw an add for a trimmer attachment that is essentially the same thing and have been wanting to try ever since. If you find a good way to attach it I'd love to hear how it turned out. Thanks for taking the time to post a comment!
@lettybromenschenkel5807
@lettybromenschenkel5807 5 лет назад
I would wear shin or leg guards or high boots, not ever take a chance this would chop off a leg.
@DialedInDIY
@DialedInDIY 5 лет назад
I agree that it is always better to err on the side of safety. Cover the legs and ankles just in case! Thanks for watching and taking the time to post a comment!
@ghostunix731
@ghostunix731 5 лет назад
I how steel toe boots but that might not be enough.
@DaveCole-daveainthere
@DaveCole-daveainthere 5 лет назад
@@DialedInDIY I have small embedded steel in my legs...keep on doing this and you will too.
@vivaint08
@vivaint08 4 года назад
for sure wear winter boots or work safety boots
@CraigTerrian
@CraigTerrian 4 года назад
Oh man! I've got to try this. Except for me, I'm going to make two wires to create a 4 way cutter.
@DialedInDIY
@DialedInDIY 4 года назад
Great idea; I'd love to hear how it turns out if you get a chance to try it. Thanks for watching and taking the time to comment. I really appreciate it!
@heru-deshet359
@heru-deshet359 3 года назад
I have always used braided cable in my trimmers. Weak electric ones burn out because they can't take it. My Greenworks electric handles it easily!
@DialedInDIY
@DialedInDIY 3 года назад
That is great to know... thanks for sharing that feedback. Do you have the 40, 60 or 80 volt model?
@heru-deshet359
@heru-deshet359 3 года назад
@@DialedInDIY 60.
@elkadosh4726
@elkadosh4726 4 года назад
That's ingenius! Brilliant hack thanks for that!
@DialedInDIY
@DialedInDIY 4 года назад
You are very welcome. Thanks for taking time to watch and post your comment. I really appreciate it!
@coondogtheman
@coondogtheman 5 лет назад
Did this one time and it worked for a little while. the cable eventually broke. I used thin steel cable. I used an old trimmer that belonged to my grandfather and it was gnarly, it had a friggin chain as the cutting blade. I'm not sure if he made that or purchased it but I could cut a thick bush down like it's a tree. the trimmer cut right through it like a chainsaw.
@DialedInDIY
@DialedInDIY 5 лет назад
Hmmmm... a chain. There are several issues solved with a chain... biggest is that it flexes better and is less likely to snap or snag on thick items. I might have to try it as a fun experiment. Thanks for watching & commenting.
@coondogtheman
@coondogtheman 5 лет назад
@@DialedInDIY the chain had ends that resembled blades so maybe it was purchased back in the day.
@heavyhanded1782
@heavyhanded1782 5 лет назад
You can still buy chainsaw attachments for weed eaters. Harbor freight sells the attachment for around 70$. It is significantly smaller then a normal chainsaw though
@OriginalJimmy5star
@OriginalJimmy5star 6 лет назад
Just Brilliant! I'll get on it right away! Thanx M8!
@DialedInDIY
@DialedInDIY 6 лет назад
I'd love to hear how it turns out if you try it. I am working on finding something that will last a bit longer too (if it hits a thick branch, etc. it can snap off quicker). Thanks for watching and for the comment (I greatly appreciate it!).
@gregsettle9725
@gregsettle9725 3 года назад
I have tried 3 different kits for putting blades on my trimmer none of which installed correctly. So, this is the next step!
@DialedInDIY
@DialedInDIY 3 года назад
Awesome... hope it is exactly what you were looking for. I've tested on more than one trimmer now and one thing I have noticed is that the torque of the specific trimmer type really effects how the wire holds up. I did find that heavier fence wire that is coated in a plastic held up better at the point it exits the spindle (but the coating disappears quick on the cutting ends).
@lordbelcheriv6115
@lordbelcheriv6115 3 года назад
Nice. Braided wire will fray, maybe use solid wire (maybe for instruments, like string for a bass guitar?).
@DialedInDIY
@DialedInDIY 3 года назад
Great tip... thank you. I actually had a comment from someone who tried guitar string and said it works great. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@sleeksm4
@sleeksm4 2 года назад
How would u attach the string to the trimmer though there's no where to make i loop
@paulrooster2108
@paulrooster2108 3 года назад
Yea that's cool , the Cats Meow however if your Wacker has a threaded shaft , is to take a saw blade one of the cheap like skill saw -- 7-1/4 " they come with various adapters, get a couple fender washers , you can get a Allen head bolt with a shoulder on it , now remember the Wacker turns counterclockwise so make sure you put the blade teeth going in the right direction, Ive found the plywood / finishing blades ( high tooth count ) work better .
@DialedInDIY
@DialedInDIY 3 года назад
Now that is an idea I'm going to have to try out (but not do a video on). Thanks so much for the tip!
@davidmayhall6567
@davidmayhall6567 5 лет назад
I mounted a 7 and 1/4inch saw blade on my gas weed trimmer and sharpened that carbide blade up. I trimmed a field of high weeds as my brother came behind me on a riding lawnmower. We cut the whole field then almost done the blade came off at high speed and shot off sideways across the field 😮 I decided never mount a saw blade on a weed eater ever again
@DialedInDIY
@DialedInDIY 5 лет назад
Thanks so much for the post. The saw blade was actually what I originally wanted to do with reinforced, metal guard. But, based upon your experience maybe I will just have to leave that one off the planning list. I appreciate the comment!
@Sevil2024
@Sevil2024 Год назад
I have a trimmer I'm not happy with. I've tried zip ties but that didn't work well. I will try this and apply some of the suggestions made by some good people in the comments.
@s.harvilla5571
@s.harvilla5571 4 года назад
I just ordered 4 strand wire and grommets for this hack. I also ordered metal shoelace aglets (tips). I'm going to use them on the ends of the wire, maybe with some glue. I'll see if that stops the wire from unraveling so quickly.
@DialedInDIY
@DialedInDIY 4 года назад
Love the creativity...once you get a chance to try it out I'd love to know how it turned out for you. Thanks for taking the time to watch and comment!
@s.harvilla5571
@s.harvilla5571 4 года назад
@@DialedInDIY I tried the shoelace tips. It still didn't last very long. I glued the tips before I put the wire on the trimmer. I'm going to try it again and save the tips on the end and put them on after I put the wire on the trimmer. Flexing the wire to go on the trimmer was difficult with the tips on the ends. I am also thinking about using heat-shrink tubing. The tips I used next to the grommet worked great.
@DialedInDIY
@DialedInDIY 4 года назад
Good thoughts. Someone previously recommended insulated fence cable which seems like a good idea but I am not sure how long it will hold up against hitting ground and stuff. There have been allot of other suggestions in these comments that I would like to eventually test out also.
@DialedInDIY
@DialedInDIY 4 года назад
I like that idea allot. I was thinking about ways to possibly enhance the durability of coating on the vinyl covered galvanized fence wire. Heat shrink may be a good option. Let me know how it turns out for you. Thanks again!!
@bsboneless1
@bsboneless1 4 года назад
Finally ! My yard is full of empty boxes
@DialedInDIY
@DialedInDIY 4 года назад
I know, right? It is amazing how fast those darn boxes get out of control. We call them "Amazon weeds." LOL. Thanks for taking time to watch and comment!
@bearsoundzMusic
@bearsoundzMusic 3 года назад
" Finally ! My yard is full of empty boxes " Before you "trim" em' -Make sure there *no cats* in any of em'.........
@jamesanthony8438
@jamesanthony8438 5 лет назад
I don't know why, but I really enjoyed this; maybe a bit too much. I was looking at that trimmer at the harbor freight site an hour or so ago and may pick one up next time I had up that way. Thanks for the honest review and hack idea. =)
@DialedInDIY
@DialedInDIY 4 года назад
Thank you very much for taking the time to watch my video and post a comment! I greatly appreciate it.
@roadgeek1
@roadgeek1 3 года назад
I saw the cheap Harbor Freight weed wacker on sale and was looking to see if anyone modified one to use a saw blade and found this instead. This should do!
@DialedInDIY
@DialedInDIY 3 года назад
Awe... its like you read my mind. My original plan was a saw blade but I thought that would be a bit risky to put on RU-vid... I still might try it though. Sorry for the delay in reply... I really do appreciate that you took the time to watch and post a comment!
@rahmanbidin2214
@rahmanbidin2214 3 года назад
Wow... Superb mod, thanks
@DialedInDIY
@DialedInDIY 3 года назад
Thank you so much for the feedback!
@weareparkerful
@weareparkerful 3 года назад
I put on my safety glasses to watch this video
@DialedInDIY
@DialedInDIY 3 года назад
That's a good one... got a good chuckle out of me. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@weareparkerful
@weareparkerful 3 года назад
@@DialedInDIY I’m gonna do that to mine.
@dwightstewart7181
@dwightstewart7181 5 лет назад
LOL. To make the wire last longer, solder about a half inch out from the center to keep the wire from unraveling and about a half inch in from the ends to reduce fraying. The latter will also reduce the release of small wire fragments into the grass. Don't solder the entire thing, as flexible wire seems to work better in most situations. If you really want to get hardcore/deadly, try single strand high-tensile piano wire. That stuff will very quickly cut through anything, including human flesh & bone.
@jetseat
@jetseat 5 лет назад
Thanks that's what I thought
@DialedInDIY
@DialedInDIY 5 лет назад
Great suggestions! I'm adding these to my lists of ideas to try. Thanks so much for watching and taking the time to post a comment!
@maplecanuck6454
@maplecanuck6454 5 месяцев назад
I still remember "original " string trimmers--- had only single strand of line (looped on pin)which was changed out after worn to minimum length
@gautombose4172
@gautombose4172 3 года назад
Hi. I tried this hack. It only worked for very short while. I used 2mm braided steel wire. The wire snapped very quickly at the gromet. The steel wire also frayes at the ends. 4mm braided steel cable will not go through the holes. I will try 3mm braided steel cable.
@DialedInDIY
@DialedInDIY 3 года назад
I have had great success with it and the cable I used actually lasted longer than I expected. I have received allot of comments about different types of cables (guitar string, etc); some being more effective than others. Maybe a different type of cable would work better for you. I appreciate you watching the video and taking time to post your comment!
@ronkoyonagi4907
@ronkoyonagi4907 5 лет назад
I think I've heard you as a Late night FM DJ...Thanks
@DialedInDIY
@DialedInDIY 5 лет назад
LOL... I have been told that before. I tend to do my voice stuff later at night so while trying not to be too loud for those attempting to sleep I end up sliding into the more "DJ-like" tones and flow. Thanks for watching and for taking the time to comment!!
@eugenecummings1
@eugenecummings1 2 года назад
This was a good idea But the wire keeps getting chewed up so fast that I spend more time replacing the wire. But it does aggressively take care of The edge work like a charm
@guitarguy382
@guitarguy382 4 года назад
I'm going to try this.....but with a guitar string. They come in many different gauges.....and also wound and unwound. Each guitar string comes with what's called a 'ball-end', which (in this scenario) would secure the string once threaded thru the hole. I'll probably use 2 strings opposite each other......so as not to throw the motor off-balance. A bass-guitar string might be a good choice, as they are much thicker.
@DialedInDIY
@DialedInDIY 4 года назад
I love it. That sounds like a great option and I would LOVE to hear how it worked for you. I think I have some strings somewhere... I need to check because now I am very curious to see how that works out. Thank you so much for taking the time to watch and comment on my video!!
@guitarguy382
@guitarguy382 4 года назад
@@DialedInDIY I found a B&D GrassHog in the garage when we bought our house. Didn't take long to figure out why the previous owner left it behind............... I had to power-off, remove the orange cap, manually thread new cable..........at least once per minute. I'd get maybe 4 or 5 feet trimmed......power-off, remove the orange cap, manually thread new cable. Rinse/repeat. Didn't matter whether it was a brand- new spool or cable I'd spooled. Lost track of how many times I threw it down the length of my driveway.
@drnh4444
@drnh4444 3 года назад
I used a petrol strimmer once. Never again, that thing was lethal and flew stones up like bullets
@DialedInDIY
@DialedInDIY 3 года назад
I've never used one of those before but I have heard that they are a beast when it comes to power and debris field radius.
@madhousemovies4699
@madhousemovies4699 3 года назад
very useful video from the start. Subscribed!
@DialedInDIY
@DialedInDIY 3 года назад
Awesome! Thank you very much for the feedback and the sub! I really appreciate it.
@MrTodd2000
@MrTodd2000 4 года назад
Awesome and people please wear your safety glasses !
@DialedInDIY
@DialedInDIY 4 года назад
Yes, yes, yes... absolutely yes re the safety glasses! Thanks so much for watching my video!!
@geoffslumber5979
@geoffslumber5979 4 года назад
Table saw blade retro fitted on those work amazing for saplings and up too 3ish inches thick. Be careful with the saw blade as it can get a bit wild. Lol. Watch out for the steel cable too throw needles at your shins and legs as it’s wearing down.
@DialedInDIY
@DialedInDIY 4 года назад
Saw blade is a very curiously fun sounding idea. For any of the hacks I use (or try) I make sure to keep the kick guard between me and the spinning materials... and then avoid using when anyone is around. Thanks for the great idea!.. and for watching.
@tonycat721
@tonycat721 4 года назад
OMFGG I never thought of this..... oh boy I'm waiting to get home to try this...………………. lol... I love it … I love it... this rymes with "clucking bell !!!!!"
@DialedInDIY
@DialedInDIY 4 года назад
Awwweeessssoooooome! If you get a chance to try it I'd love to hear how it turned out for you. Thanks so much for watching and taking the time to comment!
@350Gizzle
@350Gizzle 5 месяцев назад
The video I was looking for! Thanks bro 😎
@r.1599
@r.1599 Год назад
You're having so much fun!!!
@detleftank8351
@detleftank8351 4 года назад
Fantastic, I like it, Just some concern with safety, I would wear a FACE SHIELD, WIRE IS ABLE TO BREAK TOO !!!!!!
@DialedInDIY
@DialedInDIY 4 года назад
Thank you very much! You are so right, the wire will eventually break as does the nylon string which is why I highly encourage extra caution. I always make sure the trimmer guards and walls are between me and the line.
@avidrdr5640
@avidrdr5640 3 года назад
I've recently been looking for an alternative to feeding plastic directly into the ground with my weed eater and the ones with razors looked great (the Tri-Clone Trimmer attachment), as does this wire, but neither would last or be safe to use in my yard with so many big rocks, stones and bricks. No thanks to the flying metal shards.
@DialedInDIY
@DialedInDIY 3 года назад
Totally understand. I got a comment back from someone about an attachment called "ugly head" or something like that and it looked very promising. I have also been looking for a good alternative for use around allot of rock and block. Thanks for watching my video and taking time to post a comment!
@EdDro510
@EdDro510 3 года назад
Thought it was gonna be tough but it broke pretty quick. Regular trimmer line lasts way longer!! Thanks tho
@DialedInDIY
@DialedInDIY 3 года назад
Sorry it did not work well for you. One thing I have noticed is that the torque of the specific trimmer type really effects how the wire holds up. I did find that heavier fence wire that is coated in a plastic held up better at the point it exits the spindle (but the coating disappears quick on the cutting ends). I have received allot of comments about different types of cables; some being more effective than others. Maybe a different type of cable would work better for you. I appreciate you watching the video and taking time to post your comment!
@briannwo1900
@briannwo1900 2 года назад
Better keep your legs clear of that thing ! Looks dangerous as hell.
@johnhealy9231
@johnhealy9231 4 года назад
You could try bicycle,brake,or gear cable
@DialedInDIY
@DialedInDIY 4 года назад
Awesome idea... that is a new addition to the recommendations and I am adding it to my list to try. Thanks so much for watching my video and taking the time to post your comment.
@paulballistreri
@paulballistreri 4 года назад
I had to try this. I got the same wire. It didn't last more than 5 minutes before I had to redo it. After the 3rd time, I quit. I watched the video several times. the wire seems to brittle and snaps off just like the crappy blue nylon. But I am going to try again.
@DialedInDIY
@DialedInDIY 4 года назад
Thank you very much for watching and taking time to reply. Just as an add on thought; I've heard from some who used more powerful (more torque) trimmers that had the problem with quicker snapping. Some have successfully tried heavier gauge wire to fix the problem. Thought I'd throw that out there in case you may be in a similar situation.
@julierobertson6218
@julierobertson6218 6 лет назад
I believe this is just the answer I've been searching for! Thanks so much for sharing this great hack! :-)
@DialedInDIY
@DialedInDIY 6 лет назад
Awesome... thank you very much for the feedback. If you get a chance to try it out, then I'd love to hear how it worked for you! Thanks for watching and for taking the time to comment.
@tayml5621
@tayml5621 3 года назад
Very innovative!. Well done
@DialedInDIY
@DialedInDIY 3 года назад
Thank you very much. I really appreciate the kind words and you taking the time to post a comment!
@funnyfarm5555
@funnyfarm5555 2 года назад
A low voltage (12v) solderless butt connector could be easily crimped over the cable near the grommet to keep wires from unraveling. I will give your hack a try here on the farm electric fence(high tensile wire) rows and see how it goes.
@nc3826
@nc3826 2 года назад
It just takes a few seconds to solder, its entire length. (or just do the ends, if you're really in a hurry).... which does make it, last much longer..... and there are adapters for holding the wire, that can, replace needing to untwist the middle of it and the need for a grommet ... which will also make replacement faster too...
@jeffmurnahan
@jeffmurnahan 4 года назад
I have a hack. Buy an ugly head trimmer head. Put it on the weedeater. Then use the metal wire with it instead of string. Makes it to put in and replace the metal wire
@DialedInDIY
@DialedInDIY 4 года назад
I love it! Are Ugly Heads somewhat universally fitted for different trimmer brands and types? I'm going to have to look into those too. Thanks so much for watching and posting your comment... I really appreciate it.
@jeffmurnahan
@jeffmurnahan 4 года назад
Yes they are universal, but you will have to adjust the carbs once you put it on so your weedeater can handle the extra weight
@DialedInDIY
@DialedInDIY 4 года назад
Good to know. Thanks for the info!
@alexgomez-rc5nt
@alexgomez-rc5nt 2 года назад
Thanks to this video I trimmed my front toe OucH
@DialedInDIY
@DialedInDIY 2 года назад
Seriously... I had to quick doing lawnwork barefoot for the same reason... (LOL) I appreciate the feedback.Thanks for taking the time to watch my video and post a comment. [So sorry for the delay... life kinda got in the way for a bit]
@claricekitchen1613
@claricekitchen1613 4 года назад
Pretty interesting. Great results.
@DialedInDIY
@DialedInDIY 4 года назад
Thank you very much, I appreciate it!
@CTeale1
@CTeale1 5 лет назад
You should patent this process!
@DialedInDIY
@DialedInDIY 5 лет назад
Thank you very much for the great feedback!.. glad you liked it. Thanks for watching and taking time to comment.
@roberthanania3129
@roberthanania3129 3 года назад
ok - put it all together and. seems to work. Only the wire ends came apart right away. Didn't see a solution for that in video.
@DialedInDIY
@DialedInDIY 3 года назад
Love to hear that you tried it and all worked. Was there any problems with the wires unraveling? I too have noticed this but did not actually have any function loss from it. Thank you for taking time to watch my video and post a comment. I really appreciate it!
@adhaincroi
@adhaincroi 2 года назад
Id like to see if that can edge a serious overgrown path. going to give it a go. Thanks
@jellysleeks9428
@jellysleeks9428 3 месяца назад
I was thinking about trying steel fishing leaders. Tired of replacing plasic line. I have a metal fence and it always breaks the plastic line.
@the415giant
@the415giant 3 года назад
Cool idea, we’re all adults and understand how to be safe.
@DialedInDIY
@DialedInDIY 3 года назад
Thanks so much for the comment and for watching my video. You are completely right... and I would assume anyone that has a trimmer to try something like this with has had enough experience to know how to manage the use in a safe manner. It does seem like the majority of the comments concerning safety have been from people who have not tried the hack (or possibly missed some of my safety comments in the video).
@freerepublicusa2064
@freerepublicusa2064 2 года назад
I’m doing this today. Weary of my trimmer never auto loading string and weak brittle string
@DialedInDIY
@DialedInDIY 2 года назад
The "never auto loading" really started getting to me which is why I was either going to hack it or smash it. So glad I went the hack route! Thanks so much for the comments.
@garryrondeau401
@garryrondeau401 5 лет назад
He forgot one crucial step! After installation on the trimmer, he should have soldered both wires about 1 inch from the ends. This would prevent unraveling of the wires as was evident in the video and also prevent individual wires from flying off and causing possible injury.
@DialedInDIY
@DialedInDIY 5 лет назад
Hi Gary, very good thought. I actually tinkered with multiple ways to solidify, secure or otherwise keep connected the pieces of wire for this use. I actually found very little difference in outcome regarding the separation and spread of wires but I did notice that the functionality was sometimes reduced. Fortunately, the way I use this (which includes the precautions I mentioned in the video) has kept this a safe option for me for some specific uses. Interesting note: using solder, epoxy or other adhesives actually resulted in multiple break points (instead of just one) which translated into more little pieces being cast off. I appreciate you passing along the ideas and sharing your thoughts; I'm always interested in ways to Dial-In the safety and/or function!
Далее
Homemade CABLE for TRIMMER ?!!
9:21
Просмотров 4,2 млн
SIGMA ENVY IS UNTOUCHABLE 🔥 #insideout2
00:10
Просмотров 2,4 млн
Smoke 😱
00:26
Просмотров 1,2 млн
Weed Wacker String Hack!!!
12:58
Просмотров 99 тыс.
Homemade rotary CULTIVATOR for TRIMMER!
5:25
Просмотров 932 тыс.
Homemade AUXILIARY LEG for TRIMMER !!!!!
9:59
Просмотров 1,3 млн
#1 EASIEST Way To Edge A Sidewalk (How The Pros Do It)
11:04
5 Reasons to Take the Trimmer Guard OFF Your Weedeater
13:46
Can Zip Ties Replace Weed Eater Line? Does it Work?
7:12