HALO INFINITE FRAME TIME FIX 

Thank you

The life of a pc gamer

Yeah, wasn’t that way until the most recent update for me

Lmao this is so true it’s insane .

Congrats on the performance boost 👍

Intel supports SAM through re-bar on 10700k and 12400 from my experience, meaning anything on at least 10th gen supports it. Ryzen was also supported on Zen2 and later - speaking from using a 3600 with re-bar. SAM is specific to AMD Radeon GPUs than it is to Ryzen CPUs. Re-bar can be enabled in whatever BIOS is supported, but so long as you're using an AMD GPU you can toggle SAM (requires restart) so long as re-bar itself is enabled. Otherwise, it'll be disabled by default. I noticed toggling it off from the Radeon control panel across the Ryzen and Intel 10th/12th gen CPUs will lose performance in games, though more noticeable in more CPU bound games. Finally, good thing to keep in mind is to have "Above 4g decoding" enabled in BIOS since it's required for re-bar (re-bar might be disabled automatically if 4g isn't enabled but i forgor). Overall, enabling SAM on an RX 6800 helps performance more than it hurts. I used it on other GPUs in the past and all I had were stability issues, so it seems RDNA2 (RX 6800) and later won't crap itself and might even help a GPU punch above its weight.

I believe 8th and 9th gen intel have it as well no? I think it got backported after it was introduced on 10th gen, and it shows up (and seems to have a positive effect) on my Z390 MSI Motherboard

@@dragneel2765 I'm not entirely sure. Though I do know people who understand the insane technical jargons of computer hardware, and back when more platforms started receiving BIOS updates to toggle re-bar (like 2020?) it was discovered that everything back to 4th gen were capable of unofficially using re-bar. In other words, so long as you're using an RX 6000 or later, and your platform supports re-bar, just leave SAM enabled. Otherwise best to not touch it at all since anything not officially supported and older than RX 6000 will be a mess. A lot of this is anecdotal tho

@@user-jy2dg2qm9o thanks for the correction/clarification.

365 baby

@@XLR8_LIVE yes sir! Got my wife a 365xl. Think I'm about to retire my G48 and get one of the new 365 xmacro.

Watch this video on your min/max ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-m2nFdEQ6iTU.html

Good call. Luckily Halo Infinite doesn’t use that tech

This is one man on a mission 🚀

This was on a 1 week old install, only extras were the power registry change from my cpu fix vid, and some power/thermal overclocks and software. Everything was well isolated as I manually disabled a lot of services prior to recording

This game scales performance much different than most. You get tremendous uplift by dropping to 1080p or even lower

@@XLR8_LIVEperhaps a side effect of being made with the Xbox One in mind?

I use 240 for halo but that’s based on my parts and how I play. Everyone’s computer will be different based on the components you buy and the playlists you play

@@XLR8_LIVE can you do a tutorial on how you setup your capframex to get all those infos about vsync delay, input delay, frame times etc.

That’s all built into it. You just click around the categories at the top

If you’re trying to chase the absolute best performance, your refresh rate has nothing to do with it. You should be finding what what your pc can output performatively, then capping the FPS right under that. Vsync and gsync were created to stop screen tearing at the cost of latency. If you want the lowest latency possible, turn everything off How I run my setup is capped at 240 in BTB, 300 in arena, no sync of any kind. I have a 360hz monitor but I can’t reliably power that high of an FPS, so I run it under.

@@XLR8_LIVE That fair enough, I have RTX 4090 with Ryzen 7900 which runs pretty well. Just trying to squeeze more performance from correcting mistakes I might've made. But every guide keep sending me in a circle. In-game settings are fine, it just every other settings outside of the game which is annoying

The reality is unless you’re trying to sync your frames via gsync you should just be capping them at whatever is reasonable for your hardware, I cap at 240 for BTB, 300 for arena. When I had a 3080, I capped at 180 and 240 respectively

Just focus on hags and setting a proper cap then

Your CPU will likely downclock intentionally based on usage. This is completely normal. I run my 13900k at 5.5ghz all core and it down clocks to 5.1ghz under lots of stress, runs around 5.4 on infinite

Let me know how it goes 🙂

Reach out to me on Twitter!

The last third of the video covers that, where we talk about group results, and I insert the comment from the 343 engineer about varied results for different people. So in your case, if capping through rtss found you the best success, then you’ve found the best method for your specific hardware

These are PC fixes

Off

It's called CapFrameX :)

@@XLR8_LIVE Just off initially, turning off HAGS, I'm down 10ms on input delay. The bar charts show basically the same as with HAGS on but my 0.2% is now more inline with the rest. My lows aren't as bad. Very interesting... I'm going to spiral down a benchmarking hole because of this... lol thanks!

Well you just might be able to play Halo 2 Vista 😂

No

@@XLR8_LIVE 🤣 im very grateful of your confidence and commitment to helping other

Honestly wouldn’t be very much of a video. To capture takes a single key press, and the rest is just interpreting the data. I first learned it in like 5 minutes

@@XLR8_LIVE sounds good, thanks for the response. It at least gives me the confidence to jump in and try it out myself

My friend is constantly trying to get me on the finals lol

@@XLR8_LIVE its peak

@@XLR8_LIVE Wait The Finals? I LOVE The Finals

@@XLR8_LIVE its fun I bounce between it and halo infinite

Also at 7:10 we see that you have « Optimizations for windowed games » checked off. Since Halo infinite is not a real full screen game, what’s your take on activating that option, would it make sense ? (I have it on and it seems to work better that way)

the software is CapFrameX. Optimizations for windowed games is only games ran in windowed mode, not borderless or fullscreen. Infinite is Borderless exclusive, meaning it runs as fullscreen unless you have something covering the screen like an overlay, in which case it runs as a special borderless. Optimize windowed games does nothing.

@@XLR8_LIVE thank you for the response goat, very clear !

Only speak jargon bs sry

So for games that don’t have a frame limit in game and RTSS not working at the same time do you just use the Nvidia frame limiter?

Just wanted to confirm that HAGS on for me makes a noticeable difference. I guess I’m one of the not so many ?

Just wanted to confirm that HAGS on for me makes a noticeable difference. I guess I’m one of the not so many ?

Hags shouldn’t have any effect on your ping as it’s a performance related setting for hardware acceleration, and doesn’t touch anything related to networking. Only exception I could think of is by keeping it on you’re alleviating a possible CPU bottleneck and causing the game to have more room to simulate- in which case you’re running your game too hard.

Hags ON/OFF will have absolutely no impact on your ping lmao

You’d be very surprised

I have a RX 6900 XT and it says it’s not supported:/

@@boinksi I have a 6950 XT and mine has "Resizeable BAR" in the Smart Technology tab.

@@interlocutorytom I don’t have that option sadly. So confusing

@@boinksi omfg, mine is rx 6800, check for updates

@@hyperactivepuss I did. Idk if it’s my bios or not:/

what cpu gpu do u have

I got a GeForce RTX 3080.

i9-12900K