Ham Radio - Arcom RC210 Remote Control Demo 

Hi Chief, hope you're doing well. Thanks for the kind words.

The RC210 controller accepts the dtmf command over the air.

Thanks Randy, I'll see what I can muster up from photos already taken.

@Shawn Dienhart Maybe A PDF file link would be helpful

@@RpierceMotorsports I'll put something together on my website and return here to let you know when it's done.

Oay Randy, I put a PDF file on the Arcom forum. If you're not a member I can email you a copy if needed. groups.io/g/rc210/files/TM271A%20REMOTE%20MEMORY%20SCAN%20MOD%202021.pdf

@@ShawnDienhart my call sign K7SIE Got logged into the forum but can locate the post

Hi Bill, Actually both, there are two cables needed. The first is a cable from the solder pads to the controller which is done via a DB9 cable that provides the rx/tx/COS and ptt functions. The second is the blue cable plugged into the mic jack and connects to the data connector on the RC210 to provide the frequency manipulation. Here's an old video that shows some of the above. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uezlGhx2hEE.html Thanks for asking.

@Shawn Dienhart ahh ok that makes sense. Thanks for info !

These radios are installed on a mountain top as a repeater/remote base. The 2 meter radio is used to scan the band remotely from my QTH, or elsewhere, and the 440 radio is a half-duplex link to another mountain top repeater/remote base. More info here: www.theradioroom.net/hamradio/remotebase.html