Awesome informative Video experience Y'alls God Bless Ya, I purched a SR-655-HP from Allen Ward and I just love it, I'm looking forward to talking on it tomorrow. Awesome radio and great deals
I know you posted this 5 years ago, but on the off-chance that you see this comment: Can you tell me why you had the Dosy TC-4002-PSW meter set to "Horizontal" for the Antenna selector, and why you didn't switch the SSB/AM Toggle switch to "SSB" when you did the watts output test? I have a Stryker SR A-10 Mag Base antenna for my 955 and when it's in my Jeep and I wanted to check and set the SWR, I used the "Vertical" connection on the Dosy. The Antenna Selector on the Dosy was set to "VERT". Of course, I don't know if you're in the house or a vehicle and what kind of antenna you're running, but I'm sure you selected the right position for this video. I just would like to know why you selected the "Horz" position. BTW: Is there any reason why you didn't test the output on the Lower Side Band? Is it because if the USB shows 90/100 watts, it's safe to assume the LSB will be the same? I have the exact same radio and meter. The Dosy manual for the TC-4002-PSW is using an old TC-4000 or TC 4001 image to refer to the various switches in their Switch & Dial Map. They refer to a switch or dial that is not shown in their image as "#8" in "Fig 1". There's a similar confusion for yet another switch or dial, (I can't remember which), but my point is that I'm having a hell of a time trying to figure out what their talking about. I can't find any alternate manual or video about the meter's functions so I'm having to guess. I bought my SR955HPC v2 in June 2022 and had it shipped directly to a pro CB shop for conversion, Peak & Tune. I did some tests with a dummy load when I got the radio from the shop back then and it passed with flying colors. I also installed the software and made some minor changes in the Roger Beep. Then I put it in my Jeep, set the SWR, (sits at about 1.06 and no more than 1.08 at max), and I get out at least 25 to 30 miles. Lots of compliments about the way it sounds . On a skip, I've talked well over 2200 miles but then, that is a skip. So I didn't have any problems with it, I just wanted to bring it inside and do an "annual cleaning & some testing". But I just need a few small reminders as to what is supposed to be switched on and/or off for a few tests. Anyway, Thanks for the video! Rich
I bought the 655 and the echo is so faint that you can barely hear the difference. Is there an adjustment on the function of the radio. I have both knobs all the way to the right but no echo
DATA CABLE YOU HAVE TO ORDER FROM STRYKER AND DOWNLOAD THE PROGRAMMING SOFTWARE UNLESS YOU SEND IT TO SOMEONE TO HAVE DONE I PERSONALLY SET ALL MINE UP FOR PEOPLE WHEN THEY BUY WITH WHAT THEY WANT IN THE DISPLAY UP TO 8 LETTERS ALLOWED
