Harbor Freight’s NEW Black Widow 2.0 Spray Gun Review!

Просмотров 294 тыс.

% 6 468

In this episode we review the new release of Harbor Freight's top of the line spray gun. Learn how we setup this spray gun to unlock the full potential as we maximize our results!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
🔺Get the OFFICIAL Paint Society Paint Suite Here🔺
amzn.to/3Eq3pSf
*Products in this Video*
A610 Spray Gun, Half the Price of Black Widow, Performs just as good: amzn.to/421XWw4
Naked Gun Cleaner: amzn.to/3SmFI4b
PPS Adapter: amzn.to/422WMjT
PPS 14 Oz Cups: amzn.to/4247uGJ
PPS 28 OZ Cups: amzn.to/3NV5I58
Plastic Masking for Vehicle: amzn.to/3HH7S4Z
3M Yellow Automotive Tape: amzn.to/3vBtbCa
Other products used in other videos:
*CLEANERS*
Degreaser: amzn.to/3Pvghgu
Prep Cleaner: amzn.to/39EvWrd
Tack Rag: amzn.to/3sMvyk5
Spray Way Glass Cleaner: amzn.to/49GUPxd
Microfiber Tear Away Towels: amzn.to/3sGjVuO
*BODY FILLERS*
Rage Body Filler: amzn.to/486Ytio
Glaze Putty (small imperfections, skim coat): amzn.to/41xHHGN
Feather Fill Polyester Primer: amzn.to/41u79wK
*SANDPAPER*
MaxFilm Ultra Premium 6 inch Sanding Discs, P180, 15 Holes, Hook & Loop, 523-0180, 50 discs amzn.to/3Gxasdp
MaxFilm Ultra Premium 6 inch Sanding Discs, P320, 15 Holes, Hook & Loop, 523-0320, 50 discs amzn.to/3ZMasNu
MaxFilm Ultra Premium 6 inch Sanding Discs, P400, 15 Holes, Hook & Loop, 523-0400, 50 discs amzn.to/3KKmNgS
MaxFilm Ultra Premium 6 inch Sanding Discs, P600, 15 Holes, Hook & Loop, 523-0600, 50 discs amzn.to/3MsZn10
Sandpaper for Scuffing Base: amzn.to/3Su6FED
Interface Pad: amzn.to/3KlmS9p
*Paint*
SEM Trim Black: amzn.to/4axDMOg
*MASKING*
36'' Masking Paper: amzn.to/3RiPFAv
18'' Masking Paper: amzn.to/3r6hoK8
6'' Masking Paper: amzn.to/3RbmEH3
1/2 Fine Line (Used in the video): amzn.to/3P7ULNr
3M Masking Tape: amzn.to/3raZF4b
Foam Tape: amzn.to/461jKZx
1/4 Fine Line: amzn.to/3ER7U8Z
Masking Machine: amzn.to/45IieeV
other products
Astro Sunlight: amzn.to/3NrI3HZ
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
Prepping Sandpaper Starter Kit: amzn.to/3UplwPS
Prep Cleaner: amzn.to/3fZ2KPn
Tolecut Sanding Dirt Nibs: amzn.to/3PFDcEm
Griots Garage Polisher: amzn.to/3jeim2p
Milwaukee Mini Buffer: amzn.to/3G28ORm

Авто/Мото

Опубликовано:

16 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 531

@ryandass15 4 месяца назад

i think its 90% painter skill , 10% gun.

@privatesender5281 5 месяцев назад

Great vid. It was all good, but, IMO the best info was the blending angle and distance, the slight air pressure adjustment for the clear, plus the steps on how to clean the gun! Those are the bits of info that too many people skip or just miss. Thanks!

@baddonkey75 4 месяца назад

Met a guy at work who went to school for this and these were the first tips he was telling me about fixing my chips all the way to the metal.

@ahlers1977 5 месяцев назад

Been using the original Black Widow for 2 years doing garage jobs & it's been fantastic!

@jeremymaas8464 3 месяца назад

Yes it it, I'm curious what the differences between the model 1 and 2 are. . .

@JackSoffalot 3 месяца назад

@@jeremymaas8464 he explains it in the video, the trigger, gun is slightly lighter, the side control is moved. Etc. It seems Spectrum and HF are listening to the users and making the changes in order to make it better.

@atcllc8580 3 месяца назад

Agreed 👍🏾

@pmil101 2 месяца назад

I recently just tried it and I’m satisfied with the results

@klausebarbie7430 2 месяца назад

Triggerman did a video on the same gun He agreed likewise. Porphis 717 is even sweeter for about 70$ more. That gold was awesome How do you feel about featherfill over a complete as opposed to just where the filler is?

@user-ey4dp4pd4s 4 месяца назад

Excellent video on your project and great review on HF Gun! Nice technics and great information for gun setup, distance, blend and how to! Your camera man did a great job as well, no tennis match watching! Thanks for sharing!

@Quantum-Omega 4 месяца назад

That's the type of attention to detail I like, proper colour matching, surface prep and each slight layer to restore luster, well done.

@brcron007 5 месяцев назад

Thanx for the review and demo. Am getting ready to pu 1 of these. Thanx for all your tips 👍👍👍

@garywright8073 5 месяцев назад

Thank you for this! I trust your skill and experience as I have watched alot of your videos. I was looking at this gun and now I'm sure I'm buying a good gun.

@xaploq1 5 месяцев назад

Honestly looks like technique is a major contributor as well not just the tools

@oliverscorsim 4 месяца назад

My teacher actually made me use the purple gun until I could lay mirrors with it then he gave me a SATA and let me loose. It's the painter that makes the job not the tools but good paint does go a long ways

@rjserr 3 месяца назад

@oliverscorsim my welding teacher did the same thing. Put me on the shittiest welder until I could lay decent beads then on to a decent welder

@centuryfreud 15 дней назад

@@oliverscorsim what brand is good for paint?

@oliverscorsim 15 дней назад

@@centuryfreud I personally love to use nason xl for base as it's a good bang for the buck and for clear really you want high solid clear I like mipa cause it's cheap and nice but it flows like mad c130 is my favorite flow coat but lately upol 20 series is nice its gloss is hard to top but the whole week before you can fix things and buff ti a good shine is a bummer

@davida871 2 месяца назад

I've been looking at the Black Widow for awhile. Thank you for the review. I trust your opinion over others that dont have the experience like you. I just want my vehicles to look nice without breaking the bank.

@swiftWord 5 месяцев назад

I thank you for your review of the Master Pro Series 44! Thats the one I went with and it has been serving me well. I am primarily a mechanic but now able to do jobs without having to farm, them out.

@Justins00ss 5 месяцев назад

Love my original blackwidow. Sprayed my 06 gto with it and did the front bumper on my Viper with it. I do like how the 2.0 moved the fan control.

@moe4772 5 месяцев назад

I never had an issue with the fan control or swivel inlet, so is it even worth getting the 2.0? Two professionals have told me no so far...

@russellmcknight7226 5 месяцев назад

when I took my autobody course in 1979 I bought a state of the art spray gun,Devilbus JGA 502.I painted a lot of straight enamel over the next few years.I think the air at the gun was about 45-53 psi.Things have certainly changed.

@oldways75 5 месяцев назад

I still have one of those devilbiss guns,good gun

@akilama77 3 месяца назад

Excellent vid. Learned something new yet again.

@poman8772 5 месяцев назад

With the exception of ths swivel that none of the reviewers are liking, it looks like the gun can yield great results with different brands of paints and clears! Thanks Brian top notch job looks fantastic!

@josephrohn4780 5 месяцев назад

Brian you’re the best! Love your videos! I’ve learned a lot from you! I use the black widow, painted my charger in my garage at home!

@leoalvarado6466 5 месяцев назад

Ive used harbor freight paint gun from $15 to the $180 bw .N they spray fine for factor finish. He telling you the truth.Nice paintwork!

@billlear5607 5 месяцев назад

Bama buildz done a really good review on this gun. Comparing it to the earlier version. It was the first of four reviews I've seen. But I asked you to do this review and I really appreciate that. Thanks. My niece works at harbor freight and I can use her 20% off. This will be my first spray gun and I'm going to give it a try.

@WOT881 4 месяца назад

I've been refinishing my boat with Awlgrip paints and decided to give the BW's a try. I used the original 1.7 for high build primer and epoxy primer and I was really happy with them. I used the new 2.0/1.3 for the topcoat and same thing, they showed in stock online but they weren't on the shelf. The manager did find it in the back though. Great Video as always!

@be6722 5 месяцев назад

Thank you for the review!

@spaminacan6039 5 месяцев назад

You could double up a couple layers of heat shrink tubing to lock down that swivel fitting.

@Thumper68 4 месяца назад

Just get glue filled heat shrink like we use for water wells

@TheRogueBro 3 месяца назад

Or just take it off... It's threaded in.

@stco2426 Месяц назад

Nice one. I think a very honest review from Brian and loads of great tips added in for good measure, plus he's also telling us to do our own research. All good advice. Intersting comment here, too!

@tamusbaby 2 месяца назад

another great vid homie. A true instructor. TY for your review.

@patrickharrand 5 месяцев назад

Good info Brian. Thanks for sharing.

@alorrick7546 5 месяцев назад

Love your honesty here Especially in the middle section of you, you dont gotta buy it all and look at other reviews for a different perspective. Because as a dad with a budget and a mindset of why pay outragous but dont wanna buy twice... and cry twice... or give up buying because i bought alotta crap. So thank you as many push products, but this was honest. And in all things heaven bless!

@PaintSociety 5 месяцев назад

I appreciate that!

@OGTtom 5 месяцев назад

Really look forward to your videos always great , thank you Bruce

@janselbatista-ql9bk 11 дней назад

You’re the Best auto body tech in the world!!! Thank you for everything you teach us

@thomaschattergoon5723 Месяц назад

Very informative I have learned a lot from it.thanks man!!!

@bobbilly351 5 месяцев назад

As a temporary fix for the swivel, you could try installing a small hose clamp (hose screw clamp) across it, to prevent rotational movement.

@ekitching 2 месяца назад

Good idea. I would put a piece of hose on first though.

@alexcole9890 5 месяцев назад

My 2 cents on the longevity: I've had the 1.0 for a year and a half now spraying sealer every day on an average of 6 or 7 jobs a day. The sealer I use is an old school epoxy thinned to desire. I LEAVE the epoxy in my gun over night/over weekends and clean it the following morning (don't judge me I'm testing this baby out) It has held up well and sprays the same today as it has when I bought it. I get a lot of shit for using a harbor freight gun but I've done over a million dollars worth of collision wprocess. this gun being one little step in the process The black coating on the air cap will come off over time but the gun body coating itself is nearly indestructible

@sgtrickards5683 12 дней назад

I used to paint fighter aircraft and want to do some work around the house. It's good to see that someone has used a cheaper gun and gotten positive results. I truly believe that it's really about the skill.

@CP-mj8wd 13 дней назад

Very good information thanks for sharing.

@alotl1kevegas860 5 месяцев назад

I used a harbor freight HVLP purple paint gun to paint a sebring gold once. Was my first time painting. The car came out mint. It's all about preparation.

@phototec 5 месяцев назад

I am confused, I see in the video, he said to change the coupler fitting to the HLVP fitting. He didn't mention what type of air compressor he used, So is this new spray gun in the video is a HLVP spray gun, do you have to use a special HLVP air compressor, or can you use any regular air compressor. Sorry if this is a dumb question, but this is all new to me. Thanks

@1416vincent 4 месяца назад

@@phototec you can use any air compressor but you want one with higher level of cfm or at least more gallons so it can keep up with the air you will be spraying out the gun. The reason he said to use a HLVP fitting is because it has a bigger opening so more air can go to gun so you would want that fitting on your air compressor, both ends of the hose, and the gun. You can also get those fittings from harbor freight, they are called Merlin High flow quick coupler. Ps. He probably didnt mention the air compressor because he is in a paint shop and has a crazy good air compressor that nobody at home would ever have.

@waynethompson7472 5 месяцев назад

Ur channel is gr8 thank u.i started watching a month ago.and sprayed my candy white vw polo url dont have those cars in usa im 4rm s.a and came out amazing yes few things 2 learn so ill keep watching

@jimprovax6846 5 месяцев назад

Awesome job Brian. Love that color. I like your tape trick on that unless swivel. Enjoy your evening.

@stevenblack2548 5 месяцев назад

That’s incredible. You have skills SR

@user-qm3cd3wl9y 3 месяца назад

Very professional unlike other body shop channels i have painted 40 years

@markforrestsr2242 4 месяца назад

Thank you,,,,, i just bought this gun because of you!!!

@RJ-nh9hw 2 месяца назад

I like the flow out, however, you should show us the finished work, de-masked, out in the sun, multiple angles to verify color match. That would certify your blending skills (which begin with mixing the paint, etc.). I would hire you just for the clean bench in the one shot...and promoting keeping the gun's exterior clean too! Well done, amigo!

@brettsanderson8680 Месяц назад

Did you not watch till the very end? It was unmasked and outside. my man cant control the weather so the amount of sun outside when he can shoot the vid is the only amount he's going to get. Also I'm not sure how many more angles you want.

@Beaver-be8vk 5 месяцев назад

The good paint vs good gun comments are so true.

@calvynvandenberg6943 5 месяцев назад

Came out really nice. Great review!

@normandothegreat 4 месяца назад

Great work you guys!

@billbliss2500 5 месяцев назад

Great job as always!

@judih.8754 5 месяцев назад

That is a beautiful job Brian! Wow.

@3amcudi21 5 месяцев назад

Love my Blackwidow its great

@markforrestsr2242 4 месяца назад

I'm sure I'd have to sell my first born, and one of my eyes, to have you paint my pickup? Ha, you're seriously the best! Thank you for all you do, to take us through each step of this overwhelming process! You're a gifted man!!!

@Bayuhutamamotor 5 месяцев назад

Thank you for sharing your knowledge bro 👍👍 always successful

@IHFarmer2007 5 месяцев назад

Looked for this gun on the shelf like you did and a week or two later I finally asked about it and they came out with. Haven’t been able to spray with it yet but I have high hopes. If that swivel fitting becomes an issue I will either tape it, take it out and weld it or find some other fitting.

@jdmekfernando 5 месяцев назад

I’m a young painter that’s learning something new as the days go by what’s the difference when you use fast medium and slow reducer (thank you for these very informative videos and tips helps me a lot )

@davesiringo7147 5 месяцев назад

1)it effects length of dry(flash) times of your color coats. 2) in metallics, this can have an effect on color. A faster reducer will keep the metallic flakes in more of a "standing" position as the solvent will evaporate faster, whereas using a slower reducer gives the metallic particles more time to "lay down" in a flatter pattern. Since they lay flatter, the sun reflects from a flatter, more uniform manner, where the "standing" metallics will reflect from more random patterns. This will have an effect on color. 3) In single stage paint, it effects flow (how well it lays down absent of peel) Too fast and you risk peel and dry finish. Too slow and you risk runs. That's This why medium is a good starting point. This is a basic overview to help get you started. Any other questions, just ask.

@delbertgrubb1341 5 месяцев назад

Nice video,I have both black widows and the 2.0 does put clear on great

@kuuipoalohalawler755 25 дней назад

Excellent sprayer made it a great paint job

@ST-cy6we 3 месяца назад

Interesting technique.. it works.. the paint looks great!!!

@StuffMikeLikes 5 месяцев назад

Great video, Brian! Hit that regulator swivel with a quick tack weld, problem solved.

@jamescorfield534 2 месяца назад

I like that he said it’s higher end of cheap spray guns and it’s not expensive. That’s cool

@GarageNoise 5 месяцев назад

Fun video Brian!

@sgtrickards5683 12 дней назад

I've been away from the paint world for awhile. I painted F1-16s and A-10s in the Air Force some years back. That spray cleaner is fantastic. It blasts the paint right off. We never had that. I had to use brushes and a bucket of thinner.

@davida871 5 месяцев назад

Wow love that color. That gun looks like a winner. I have 5 guns already. I was eyeing that HTE 1.3 for awhile. I'm in cold weather now but soon as I see a sale on it I'm pulling the trigger. 😂

@joecastillo8995 Месяц назад

Good Job Juan 👍😉

@shawns57garage 5 месяцев назад

Great job as always 👍👊 don’t overthink it … it’s just paint 🎨!

@Gabriellariz 5 месяцев назад

In many occasions, it’s not the tool, but rather the operator. Likewise, I’ve have/had top tools and I couldn’t get it done. Thank you for sharing.

@pjw7269 2 месяца назад

Appreciate you helping the low buck guy

@rayjackson4547 3 месяца назад

Another great job

@mjb242 5 месяцев назад

Great video, that finish came out amazing! One question I always wondered about is are some clear coats more resistant to the sun than others and can you do a video on that.

@johnnyt1408 5 месяцев назад

Awesome, just got your paint suit in today can’t wait to try it out.

@PaintSociety 5 месяцев назад

Thank you so much

@MP-zh2tk 5 месяцев назад

Great video!!!! I am going to to look around I’d like to get a suit and I was also wondering what is your top cheap spray gun ??

@cars-crypto 4 месяца назад

gotta clea nthe booth just like you clean your guns , nice job paint quality top tier

@BeADad2447 4 месяца назад

Super awesome video! Damn it I wish I didn't see this video, I know what I'm doing tomorrow.

@ganeshnarayan5505 5 месяцев назад

Beautiful paint job Brian Harbor Freight did it again.

@TheCd75 3 месяца назад

like the video wondered how good those cheep paint guns would work very professional job all tho most of that is the painter and experience very nice clean job thanks again for the insight and tips

@zachnuketown 5 месяцев назад

This is awesome. I sold my supernova and bought 2 of these that I use everyday. I also have a ton of other top end guns but I’ve used my black widow to clear every job for the last 3 months and they spray flawlessly.

@zachnuketown 5 месяцев назад

And I’m not a huge fan of the swivel but I have 3 satas that all do the same thing so I’m used to it.

@MarcBchannel 5 месяцев назад

I thought about getting a supernova but I hear they're a pain sometimes. Some work some don't. Some are finicky with the fan adjustment, some not. My lph400 is kinda finicky. My w400's work great. This new BW looks like a winner

@zachnuketown 5 месяцев назад

@@MarcBchannel I had great luck with the supernova for about a year and then I could never get it to spray right. I replaced almost everything and it still sprayed uneven.

@MarcBchannel 5 месяцев назад

@zachnuketown Ya my LPH400 started acting up too. The pattern is a little heavy on one spot in the middle and I have to clock the cap to the right a bit to get it to spray straight. I don't like using guns that are hard to use. I don't think I'll be buying anymore tulip tip guns. It's too bad because they spray nice when they work

@geotracker30 5 месяцев назад

what psi do you spray clear at? im getting ready to paint my 2015 mustang and looking at this gun.

@jamesharrington9826 5 месяцев назад

Definitely not a fan of the swivel air gauge but it looks like a nice gun to start out with ! Keep up the great paint videos 😁

@user-ql2rj6vi1e 5 месяцев назад

First off thank you for all of your videos, recently just found this channel and it’s great. I just purchased this gun for a project at home that I’ll be spraying in a mobile paint booth. I wanted to know if you had some input on a good deep red color to spray that is a solid and a base clear. With the restraints of a mobile paint booth and small compressor and lack of a perfect air line filtration system I don’t want to attempt something 3 stage or even metallic. I feel like I’m already pushing it as it is painting an entire car in an inflatable booth.

@roygustafson507 2 месяца назад

Looks Great Brother❤😊

@seanscott7120 2 месяца назад

Nice gun finish dude!

@richardaffonso 2 месяца назад

Awesome video!

@camman61 5 месяцев назад

great Job ! Widow 2.0 ! very nice :)

@DirtyDovi 3 месяца назад

This was a fun one to watch! Back in my pro-painting days, my daily drivers where: Devilbiss GTI millennium X2: 1 for basecoats / 1 for clears, SataJet 90, and A Handful of HF Purples [My 1 friend used a Sata-Digital and my 2nd friend used a high end Iwata] *So I've been around top tier guns.. They ran regular autobody/collision shops - I ran a 'custom shop', so they sprayed Martin Senour / PPG and I sprayed PPG / Alsa / Glasurit / H.O.K., One weekend, we each had a project, so went w/ our choice in Paint, but ALL Of US had to use our HF Purples! [Normally they were designated to primer guns for for shooting single stage urethanes] Anyways.. All said n' done, all paintjobs turned out well enough that if given a thorough wet sand / Trizact / buff / polish job, the average person wouldn't have known that they weren't painting using high end / high dollar equipment! 🤘😁 Also, back then [2012ish] I also grabbed a few of HF's airbrushes.. For the most part - They were what you'd expect.. Pretty Good - For the price.. My buddy took all of mine apart, mixed and matched a few components, and came up w/ a Frankenstein.. When used though was Just As Good As My High End Iwata! [I *might actually still have that thing kickin' around]

@NBC_NCO 3 месяца назад

I would like to have a piece of sheet metal painted in that color for my work bench. Very cool.

@k20edef1 5 месяцев назад

Used mine yesterday and today using PPG Envirobase. Sealer and paint is realllly good. Clear coat seamed like it lacked the power(i usually use a RP). Curious to see how it holds up. I will continue to use it everyday for sealer and base.

@Dankma 5 месяцев назад

I have one of these, it's too good!

@filter501 5 месяцев назад

Wow nice car, love the color too. Brian, you are the Best.

@PaintSociety 5 месяцев назад

Glad you like it!

@freddaniali 5 месяцев назад

Brian, great gun and a really cool color!

@mr.cangieter8758 3 месяца назад

Hey Brian, one video I'd like to see you do is, spraying "Steel-It". It's a polyurethane weldable paint used heavily in the motorsports and off-road industry. It's great for things like subframes etc. so far I've seen good reviews about it, especially on how well it holds up to rust. I'd like tos ee your take on it.

@DachsAutos 5 месяцев назад

I've the the previous HTE version, and I see it as a major upgrade from the 25$ guns from HF. Maybe my MOPAR resto guy will pony up for some better paint on his project, but it laid down the Nason clear pretty well!

@michaelgleason4791 5 месяцев назад

At over 7x the price I'd hope so

@stevenbean9706 2 месяца назад

this is super nice for the price!

@JamisonOutdoorAdventures 5 месяцев назад

You seemed to have fun in this video, as in you seemed loose and not going by a script. Thumbs up

@Paulnunz_ 5 месяцев назад

I really like your videos man! I would like a video where you show everything I need to paint my car. From what air compressor, to guns, where I can find the paint, primer and clear that I need, etc. I’m a do it my self type of guy, but with painting cars is a lot of stuff to take in and I can’t find a videos that covers it all in a simplified way

@davesiringo7147 5 месяцев назад

Kevin Tetz has quite a few videos. But I'll tell you this...quality finishes require a large amount of air VOLUME and CLEAN air. Yes, it's expensive, but necessary

@Paulnunz_ 5 месяцев назад

In your opinion, whats the minnim gallon air compressor you need for a quality paint job?@@davesiringo7147

@michaelgebhard9869 4 месяца назад

Good Job- makes me want to go paint something now! 😏

@robertcharlton1551 5 месяцев назад

Your black widow job looked great. What cfm compressor would it take?

@antonioingram8825 5 месяцев назад

I need list for everything I need to paint cars. 🔥🔥

@TreDeuce-qw3kv Месяц назад

Duplicating 'factory orange peel'. Never thought I would hear that.... Another informative Brian review. The first paint job(Lacquer) I did back in the early 70's was on a 57' Studebaker Hawk using and old garage sale Craftsman gun and a pretty sketchy old small compressor. Came out pretty good cuz the customer paid me and gave me another job, but in the mean time I painted my 63' Sting Ray roadster which was a prepping disaster as I used a chemical paint remover and it attacked the factory filler. You wouldn't believe how much filler was used on those old Corvette bodies. Pounds and pounds of it. Took a lot of evenings and weekends to fix that mistake.

@ST-cy6we 3 месяца назад

Great video. I would recommend a clear coat only gun.. It's worth the money to not have crap in your clear.

@Means2anEnd6611 5 месяцев назад

Amazing!

@dannystables5512 5 месяцев назад

Goes back to old saying it’s not the tool it’s the mechanic, looks great

@Van-tastic 5 месяцев назад

New stuff a HF takes forever to get on the shelf. My store has learned that I’m always shopping the new tools page lol.

@zaybro0295 5 месяцев назад

Hey Brian! Very in depth analysis video. What is the name of the gold color?

@automotiveenthusiast1160 5 месяцев назад

All I heard was "buy every spray gun" LOL. Great job on the blend. Keep up the great reviews on all the various equipment used in a body shop.

@timbarnes1206 5 месяцев назад

Bro, nice work again. 😎Brian.

@michaelvandenhoy1021 5 дней назад

Great tips, really surprised with harbor paint gun.

@MarcBchannel 2 месяца назад

For the money this gun is really good. Really good for base. Kinda slow for clear but it gets it done. Atomizes really well. Its a good gun for beginners, apprentices, and for a beater gun in a pro shop

@tommievampire1 3 месяца назад

Brian,you did excellent job and it looks awesome.Can black widow spray gun use for small air compressor with 30 gallon tanks ?

@typicalbamboozler6030 2 месяца назад

i love the swivel on my sata x5500 but now come to think of it if your using a regulator on your gun and not on the wall it cold be an issue. i really hate having a regulator on my gun just because the extra length can keep you from getting into tighter spaces. like when your painting the underside of a rocker and the pinch weld or cutting in a core support. been interested in trying out one of these guns for base.. and if its not up to snuff it should make a fine sealer gun.