I think rather than grinding down the fitting I would try putting some washers between the pump and the base. While the pump is loose I would thread the fitting on to the pump.
Hi Will I know this is an old video,but I have just followed the same solution that you had,however after mounting the adapter and ball valve the flow of oil is less due to the small hole from adapter.Have you seen same issue?What will be you recommendation?btw did not grind the adapter it did fit well without obstruction 39G HF Compressor
I’m a day late on asking this question but is it possible just to get a male to male m6 pipe that’s just 1” long? Or am I even asking the correct question
Buenas tardes una pregunta tengo un compresor igual a este .y pregunta es puedo ponerle a a eceite( pure guard sea 30) ? Denme su opinión chavos porfa 🙏
Recomiendo consultar el manual en el sitio de Harbor Freight. El aceite recomendado puede cambiar según el año de su modelo y el clima en el que vive, de SAE 20, 30 o 40. El volumen también puede ser diferente, de 16 a 22 fl oz. SAE 30 probablemente esté bien. Asegúrese de agregar suficiente aceite para que quede entre las marcas del vaso.
The capacity can vary from 16-22 fluid ounces, and oil weight can vary from SAE 20 to 40, depending on which revision of this compressor you have and how much you are able to drain. Check the manual on the HF website. Or, buy at least 2 quarts, and slowly fill the pump until the level is spot-on in the site glass.
