HardOPs and Boxcutter - BEGINNERS TUTORIAL for Blender

Подписаться 91 тыс.

Просмотров 68 тыс.

50% 1

►► Our Blender courses & resources - www.blenderbro...
►► Get 10%OFF on Plasticity purchase (coupon code: BLENDERBROS) www.plasticity...
---------------------------------------------------------------------------------------------------------------------------------------------
MY FAVORITE BLENDER ADDONS:
⚙️HARDOPS and BOXCUTTER
gumroad.com/a/...
www.blendermar...
🔨 Decal/Mesh Machine/Machin3 Tools:
www.blendermar...
⛮ KITOPS 2/ Design Magic / Eevee + Cycles Materials System
gumroad.com/a/...
blendermarket....
🔌Cablerator
gumroad.com/a/...
www.blendermar...
💾Power Save / Power Link / Power Backup
gumroad.com/a/...
www.blendermar...
🧘‍♂️ Zen UV / ZenBBQ
gumroad.com/a/...
www.blendermar...
🐝UV Packmaster 3
gumroad.com/a/...
blendermarket....
☝️Mech Squad Collection and more
gumroad.com/a/...
️‍🔥Skribe - Screencast key program
gumroad.com/a/...
**Some addons listed above may contain affiliate links, giving me a small commission from any sales made. I only promote addons that I use personally.
-----------------------------------------------------------------------------------------------------------------------------
BLENDER BROS LINKS & SOCIALS:
💻 Website - www.blenderbro...
🏪 Gumroad - gumroad.com/th...
📡Blender Market - blendermarket....
☎️ Discord - / discord
🖼️ Instagram - / blenderbros3d
🎨 Artstation - www.artstation...
📣FB Group - / blenderhardsurface
CONTACT:
📱 Inquiries/questions - info@blenderbros.com
**Some addons listed above may contain affiliate links, giving me a small commission from any sales made. I only promote addons that I use personally.
🧩My personal links (stores / websites / portfolios)
➤linktr.ee/ryuurui

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 77

@PonteRyuurui Год назад

FREE SciFi Terminal Blender Course (HardOPS & Boxcutter workflow). ➤➤www.blenderbros.com/terminal

@Anthony_Gutierrez Год назад

Man, I never would have been able to get as confident with blender as I am over the past couple of years without your videos. None of my instructors in college were this helpful

@PonteRyuurui Год назад

cheers mate, glad i could help!

@bUildYT Год назад

This feels like learning blender from scratch again, but this time its the smarter bigger brother 😂🎉

@TertiaryChrome Год назад

Tip if you're using an Azerty keyboard with Tilda mixed with numerical keys, which applies SubD when you call Hops Helper : I went around by pressing Ctrl+% and it called the proper Helper menu.

@buppington Год назад

The best addon, its got a bunch of timesavers and neat tools for almost any workflow. Definitely worth its price and then some.

@PonteRyuurui Год назад

amen to that

@woldemarkiev Год назад

Thank you a lot - the day i found this tutorial is my blender birthday

@CycleverseGames Год назад

That align to edge function in amazing!! I didn't know that was available. Thank you very much.

@clkndggr Год назад

If a viewer is having trouble figuring out how to add weighted normal with ALT + LMB, you have to press it while you hover the mouse over the sharpen option in the Q menu. Took me a bit of investigation to figure that out. Hovering over Q menu brings up a mini-menu.

@Even-Steven Месяц назад

This should be required viewing :)

@davidstedmond7705 Год назад

I didn’t think I needed boxcutter but after getting it I honestly can’t believe I wasn’t using it from the start.

@rajveertomar3599 Год назад

you are the best brother

@TimTylor Год назад

Great overview! I just got the add-ons and this was an excellent introduction.

@ray3dx661 Год назад

Thank you so much, this has been incredibly helpful! I really appreciate all you've taught.

@PonteRyuurui Год назад

my pleasure!

@jimmysgameclips Год назад

Thankyou! Some really handy tools here for sure

@LordYodel 8 месяцев назад

thank you so much, appreciate all your videos man. But what's confusing for me as a rookie. you talk about chamfers vs. Bevels. I can't find any clarification or clear explanation about the difference between chamfers and bevels. Also, practical use case. When to use a bevel, when a chamfer, and what different types? When to use it on a SubDiv, and when to use what kind on a low-poly game asset. Thank you so much man, it would be super cool to have a video like that, explaining those fundamentals. Cheers man and keep rocking! 👍

@PonteRyuurui 8 месяцев назад

here watch this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8y7K0lE9erw.html

@Abdullah-wo2lv Год назад

Thank you for this explanation

@DanVogt Год назад

Phenomenal tutorial. Subscribed.

@ShidoSoul Год назад

Thank you making this tutorial!

@donner7708 Год назад

Exactly what I needed thank you!

@EridaniOpsCG 9 месяцев назад

Keep coming back to this when I update and forget how hardops was set up 🤣

@mr.cheeseburger3746 Год назад

Thank you master!

@TheKevphil 6 месяцев назад

Is there a Bezier tool for making cuts?

@_casg 7 месяцев назад

bro how come when i use the cube from hardops menu and switch to cutter, it doesn't cut anything. But when I use cube from blender menu like you did , it cuts?

@arashtehrani7726 Год назад

very useful tut...thanks for make this.

@zhekunwang8589 Год назад

Very good video as always

@ali.almiss Год назад

Hello. I don't have that info bar on my screen as yours whenever I cut something with this addon. Therefore, I'm not able to see options. How to make it pop up?

@user-xl9fv8fn9y Год назад

Hello, can you tell hot keys to duplicate model with box cutters which not apply?

@sudayang1230 6 месяцев назад

Hi, while using the box cutter tools, when I press ctrl + .(dot), I could see gizmo; I like this then, I tried to move face to one of axis, the gizmo moved, not my prop. Could you let me know how to resolve this? I'd like to modeling while active that gizmo on it.

@PonteRyuurui 6 месяцев назад

Cant, i hate the gizmo thing so I have it perma nuked. Ask on our discord discord.gg/cBMF9X5

@Pneumanon Год назад

My Q menu doesn't work. It used to work, but now I haven't been able to use HOps or Boxcutter for over a year. I've updated Blender, Boxcutter & HardOps several times, and am on the latest version of all three now. I assume it's something to do with the Keymap but I can't figure out how to fix it. If anyone has a link to clear instructions on how the Keymap should be set up that would be much appreciated.

@mark8664 9 месяцев назад

Thanks for the intro. Dude your accent is killing me.

@PonteRyuurui 9 месяцев назад

ya my mom said the same thing so i emmigrated

@mark8664 9 месяцев назад

Haa heeheee@@PonteRyuurui

@alessandroconstantini5941 Год назад

At 10:17, when the mesh has a bevel applied, sharped in the Q menu doesn't seem to do anything or add a modifier. Even when I manually add weighted normals in the modifiers section, adding a boolean removes the other modifiers and doesn't work. I wonder if I'm doing something wrong here or is it maybe a bug?

@PonteRyuurui Год назад

update everything, also WN is alt + sharpen

@vi8799 Год назад

Sorry for the stupid question, but how can a newbie enter this topic? Hardops, meshmashie, boxcatter, decalmachine - I'm just confused about what is meant for what.

@PonteRyuurui Год назад

it's your lucky day www.blenderbros.com/the-ultimate-guide-to-hard-ops-boxcutter-50

@BUdJohnson242 Год назад

Discord link says invalid, heads up!

@justanothernobody7142 Год назад

I'm not sure if I'm missing something but I swapped to using Blender from Maya. I have always used the old Maya setup of holding the alt key to pan and rotate the camera in Blender. I'm not sure if that is the cause but any option in the Hardops menu that requires holding alt and clicking just doesn't work. I don't see any way of assinging the alt key to something else in hardops. I tried assigning my pan and rotate to the ctrl key instead just to see if it worked but it made no difference. I'm using the latest hardops and Blender installs. Great video btw! Edit* Ok for anyone else who has this problem I somehow just worked it out. For whatever reason the ALT key seems to work different than the other keys. So for example if I press Q and then want to add a weighted normal, I have to left click and hold on sharpen, then hold down ALT, then click off of sharpen and let go of ALT.

@PonteRyuurui Год назад

my advice to you is thus: do NOT make too many changes to your key bindings until you are proficient and know where stuff is located. You wont be able to follow any tuts and it will be a disaster.

@justanothernobody7142 Год назад

@@PonteRyuurui I actually haven't made any changes for that reason. I've been using Blender for a few years now so I'm not a beginner. I basically just changed the basic viewport navigation controls because Blender's standard controls at the time were horrible coming from Maya and Max. Anyway I solved the problem and added it as an edit just in case someone else gets confused by it in the future. Thanks for the help anyway!

@ghozgaming8704 Год назад

Sorry for the tangential question, but are you using a Linux distro? And if so, which one? (Thank you for all your videos! Purchased HO+BC!!)

@PonteRyuurui Год назад

win 10 mate, and you're welcome

@erlson Год назад

my hardops is at the bottom but I still have to press only once to get to boxcutter...Maybe I'm just lucky?

@DamielBE Год назад

is it possible to change the keybinding of the shortcuts? Because on AZERTY keyboards, especially the Belgian ones the tilda is only reachable with "Alt Gr" + "=" on the bottom right corner of the keyboard, next to the right shift.. edit: wait, it is ctrl + ~ or CTRL + ` ? in either case the ALT GR is required to reach the character

@PonteRyuurui Год назад

dl english language, switch when working

@jaujud Год назад

It's possible to change the keybind as well. Go to Preferences -> Add-ons -> Hardops -> Keymap and for this particular case look into Menus & Systems -> HOps Helper.

@DamielBE Год назад

@@jaujud Nova!! thank you! That was the one hurdle keeping me from using the HOBC suite, now I know I can go, buy and use it without keyboard issue.

@Cyber_Kriss Год назад

The only option I really don't get is the inset cut. This shit just doesn't work most of the time... I know I am missing something, but I don't know what.

@PonteRyuurui Год назад

it's a bit fiddly but i think i have a vid on it, try ssearching the hops playlist

@Cyber_Kriss Год назад

@@PonteRyuurui Yeaaaah... I have to dig deeper 🤔

@vrharh Год назад

Please Ryu, can you explain if I buy your course on Blender Market, do I have access to all the lessons directly from your site? And are future updates and life time access included in that version as well?

@PonteRyuurui Год назад

You do, but this isnt my addon. If you mean courses then sure.

@vrharh Год назад

@@PonteRyuurui Actually that's not the case. I learned it the hard way. I took one package of courses directly from BlenderMarket, but now I can't access them directly from the BlenderBros site. I have to download all the lessons on the hard drive, which is bloody annoying. I'm registered on BlenderBros but when I log in I don't see those lessons I took on BlenderMarket.

@PonteRyuurui Год назад

@@vrharh well of course you cant, it is a completely different website and we do not own Blender Market... email us directly and we can help you out. By "your site" i thought you mean our store front on blender market

@user-kb7sy3su8d Год назад

Thanks a lot!

@davewills6121 Год назад

Hi guys, noob question, every time i cut with Boxcutter i get this big ass 'timed text' across 70% of the screen. Could some kind soul tell me how to correct this please, its so feckin annoying? Regards

@PonteRyuurui Год назад

i ve no idea what it is, hop on hops discord and ask

@davewills6121 Год назад

@@PonteRyuurui No luck with the issue, yet saw your vid on ''Powerbackup'', so sorted. Enjoying your content and have subscribed to you FREE content and brought the ''The Ultimate Guide To Hard Ops And Boxcutter_upd'', so looking forward to diving in.Kudos

@darrenberkey7017 Год назад

The parts where he swears are subtly disguised bug fix and feature change requests for the Blender developers. 😆

@PonteRyuurui Год назад

spot on

@TILK3D Год назад

It doesn't work for me in version 3.4.1

@PonteRyuurui Год назад

thats because 3.4 is terrible

@ArtmasterRoy Год назад

Hi, I can't follow your links from Russia

@PonteRyuurui Год назад

use vpn

@stltrekmodels.4157 Год назад

Personally I think Boxcutter is yet just another vile plot thought up by THE MAN to keep a Brother down!

@PonteRyuurui Год назад

have you considered a day off?

@stltrekmodels.4157 Год назад

@@PonteRyuurui Never I am to busy making 3D printed Star Ships and Chess Pieces. LOL. I actually love your content as I have been a fellow Blender modeler for 14 years now. I also use Z Brush, CC3/4 3D coat and Marvelous Designer. I did learn Blender the hard way, so any add on's or techniques that make it easier and faster is a definite plus. Just thought you might like the retro joke. Most of the kids know nothing about THE MAN.

@PonteRyuurui Год назад

@@stltrekmodels.4157Ttbh I've no idea who that is. Cheers mate, glad my mumbling is helpful.

@stltrekmodels.4157 Год назад

@@PonteRyuurui THE MAN was a thing that black people and hippies used to call the government and the police. It was a meme for about 3 decades. I joke about it some times. Anyway I just set up 3 now printers so I can start printing model parts to test fit. The Boolian and Beveling tuts are great. I have always modeled the hard way so I love learning easier and faster methods.

@PonteRyuurui Год назад

@@stltrekmodels.4157 well when i was growing up the only black ppl in the country were coal miners. there is a terminal course, free, grab it, it will teach you the basics on addon workflow, link is in the vid descr

@mihailamarcel5201 5 месяцев назад

its usefull only for shortcuts..the rest is pure crap!!!when to see your solutions for complex forms..like some asimetrical arhitecture ...its useless crap

@PonteRyuurui 5 месяцев назад

awww what happend, your mum's attic too small?