Harley Davidson Basic Tool Set 

+1 on that tire pressure gauge. I received a gift card and didn't realize I needed that gauge! It's super handy for 90 degree stems AND those straight (standard) ones. Gets around the rotors easily.

My most used assessment tool....a flashlight. Nice video John. My box set up very similar. I did label drawers with goofy tags like sharp things and radioactive. TechRespect

Could you talk about lift options? Maybe ways of getting your bike off the ground if you don’t have a lift? Which repairs require the bike to be off the ground. Thanks for the great videos!

“”This is my Wrench and this is my Gun ,,this is for bikes and this is for Fun”” lmao

A lot of people when bringing up the topic of US built content in HD refer to the Showa forks saying they're made in Japan. Hasn't been true since 1997. The Sunbury, Ohio plant was established in November 1986 under the name of Sunbury Component Industries. In April 1994 Sunbury Component Industries, Blanchester FCM and Showa American merged to form American Showa, Inc.American Showa Sunbury plant and the Head Office division are located at 707 W. Cherry St., Sunbury, Ohio on 39 acres with a floor space of 251,101 sq. ft. The Sunbury plant manufactures suspension and steering components for the transportation industry including automotive, motorcycle, and All-Terrain Vehicles. Its' operations include assembly, welding, cathodic electro-static painting, and in-line spring installation and testing.Mass production of the Honda Civic shock absorbers began in August 1988. The following year in September the Honda Accord shock absorber models were added. In the 1990's American Showa grew in sales with new customers, Suzuki, Subaru, Mitsubishi Motor Manufacturing, Yamaha, and Kawasaki. Additional models for Honda included the Acura and Odyssey. In 1991 inventory of Harley Davidson motorcycle front forks and rear shock absorbers made at Showa, in Japan was held at the Sunbury Plant until their mass production start in 1997. www.amshowa.com/index.php?option=com_content&view=article&id=2&Itemid=94 The Denso starter used in HD and many automotive applications?Made by Denso North America in Maryville TN. DENSO Manufacturing Tennessee, Inc. (DMTN) is DENSO Corporation’s largest U.S. manufacturing facility. With more than 1.9 million square feet of manufacturing space, the company employs more than 3,000 people and produces starters, alternators, instrument clusters and various automotive electronic products for its North American customers www.densocorp-na.com/about_us/locations/location/10

Im a tech at Highplains Harley Davidson in Clovis New Mexico, this is the first video of yours I've seen. Liked it. Sales guy said I needed to see this. Not sure why lol can't say our carts are to different, but I like how you said "they're are many carts like it but this one is mine" might steal that from ya. Good vid, if you're working on your own stuff. Since you're marketing this to novice techs. Only suggest is Buy a Service Manual if you're new to this. Don't Google forum this stuff, their opinion is not always accurate. Good vid tho.

John, you forgot about the most important tool! I can't do any work until I've had my cup of coffee, the most important tool of everyday. 😉

26 years as a auto technician, you would think I have enough to do everything I need to, I'm really curious about doing internal engine,trans,and primary work and the special items you want to have to do it. I appreciate your time and knowledge.

Nothing like a JM bonus vid at 0600hrs! Been at work all night, trying to kill the last hour, and here it is. Hope the ride to Texas/Oklahoma went well on the new HD. Great video as always man!

Holy Crap....... right from the link for the speaker in your bio, it automatically processed your coupon code! Took $127 off the cost!

Just ordered my Commuter speaker. We (wife and I) were looking to get a new one and with 65%, hell to the yeah. Thanks for all of the awesome videos. We're looking forward to any Bring It Home videos.

Stubby wrenches are VERY useful had to replace my battery yesterday and I had a hard time getting the negative tighter with just a socket or a screwdriver . It was a metric 6 bolt and a square nut and my hands are like giant sausages .I’m glad I found you or I would have a rusting sportster In my garage all my training is from watching you thanks for your videos !!!! P.S please upload more sportster stuff im still trying to tune up my 07 xl1200L and your explaining of things is much more in depth and fun so it’s easy to learn THANK YOU again!!

Of all the tools you showed us that floor lift is the best. OMG!! Never saw one actually work and that was very cool!!

Seeing the Police bike reminded me of my days stationed in Albany, Georgia, circa 1977-1979. I was one of a small group of Marines at the base who owned Harleys back then. Today if you go to a military base you will be overrun by Harleys. Anyway, I used to go to Potter Motors, the Albany Harley dealer. They aren't a Harley dealer anymore, I think they deal in tractors and other motorized utility vehicles. I was getting my 1977 XLCH serviced when I witnessed an Albany Police woman dump her Police Special while standing still in the parking lot. I ran over to help her, and boy did I get rebuked. She said, "I can do it myself!" I let it go and waited while the staff of Potter Motors came out to help her. Their customer service was much more welcome to her than my offer of help from a lowly Jarhead. The Potter boys, son's of the owner of Potter Motors were popular guys to go riding with if you were invited. The Potter boys were known to stand up to motorcycle clubs, such as the Outlaws. The Outlaws didn't fare well in Albany back then.

I have watched your videos for a while now and love the useful information on them. I think you should have mentioned one thing that would be essential if you are working on any newer bike,.. a digital multimeter. Extremely handy when working on any of the electrical systems on the bike.

Hey john I just bought my first Harley Saturday, it’s a sportster 48. I plan to do what I can on my bike. So thanks for the basic tools I need.

Ok, I’ve watched a bunch of your videos and I have to say they are all worth the time! But this one was the most interesting yet. I saw a lot of tools I could use. As interesting as cramming the whole Harley line into a small space to look at. Thanks again for your public service to the Harley community.

I’m building my shop! Can’t wait to be set up completely

Gotta love the 12 point 10mm on front brakes. That socket has its own spot in my drawer

Hey John; I don't recall seeing any screw-driver there, but I truly did not know that they made a Metric Size Crescent Wrenches, Wow what'll they think of next.. 😎 Really like the tunes coming out of your Blue Tooth, there's nothing like listening to some good Rocking Jam while on the job. You know if I wanted to take my roll around tool caddie outside I'd need to put a lift-kit under it and put some extra large All Terrain Tires on it, and a Heavy Duty Emergence Brake just to keep it in the drive-way. Hey I seen a pack of new H-D Grips hanging on the peg board there, How much you want for them...? Great Video's man. Keep'um coming. Hope to see you out there somewhere sometime. 🤠

Want to thank you as well as Matt Laidlaw and Blockhead for your reviews. I just pulled the trigger Thursday and got a 2019 road glide special with stage I and Rinehart exhaust. That bike is so different from the road king i had and I'm so impressed by the ride and the power. Not to mention all the in board goodies. It's a beast

When I used to turn wrenches for a living, I was always glad to have many name brand tools but I had a tool cart and impact sockets from harbor freight and those were awesome!

I like your presentation, clean and clear information. I like that its normal and not all technically jargon. Your videos are great.

Can't wait till November 26 I'm going to MMI in Phoenix Arizona to be a Harley Davidson mechanic and seen a lot of his videos

Very impressed with the cart john, great basics. the manual is the most important part before serving a bike indeed and learned a lot over the years and in ways, the simplicity of these machines. what motivated me was these five words of "that's not covered under warranty" and have tooled on mine ever since. great channel john and all the best to you sir!😎👍✌PEACE!

Swivel top tip from this highly trained, unprofessional, Ford tech here. As those chrome swivel extensions loosen up and get floppy they can be hard to control in tight spaces. Wrap a little electrical tape around them. The tape holds them steady but still flexes. When the tape wears out, just peel it off and add new tape.

Much respect for the snap on collection. Expensive but hands down the best.

I have that SAME Kove speaker. It is phenomenal!!!

Thanks for all of your work with these videos.

In case it becomes difficult (damaged screw head…) I have some Metrinch (unfortunately not my patent). It also reduces the number of tool I have with me on road (combines inch and metric tools). Thanks for your informativ video!!!

Gotta get me a set of those ratchet wrenches. Been considering getting a HF roll cart instead of a standard toolbox for the garage. They are convenient and a lot cheaper for some reason. Couldn't find a 36 mm combo wrench anywhere, so I went with a 1-7/16" when it came time to remove my rear axle...used it on the dummy end. It is nearly identical to 36 mm. Really helpful vid John.

John Great set up ! I have been looking for a rolling box. For working on the bikes and able to roll it out to the truck. just the stupid magnetic wrench holders is a cool trick for organization!

Love this video!! Love it! Because I, pretty much, have the same tools and I've just about gone broke buying them. ...I'm very proud of that; Because, I can perform repairs/maintenance all by myself ☺.

saw you in Paris yesterday, so many people!

The new bagger John has a minimalists view. Kind a like our favorite Harley mechanic in Georgia!

John come back to utube please your one of the best

Thank you John, because of you, Ik now what a Torx screw/bits are. It was pretty important for a mod I did on my bike :D

This was a helpful video...not unlike the rest of the videos you make. Thanks! Love the channel!

Swivele sockets are my favorite 1/4 and 3/8

Hey john I love your videos and information and congratulations on your new shop !

Perfect song, I play it every time I hit 285.😎, Great tool tips. 36mm rear axle? Think I use a 18 oh but mine are 06 Wideglide & o7 st.Bob. Thx for the good vids.

Ok Big John I ordered the Bluetooth receiver and I’ll wait for my tool roll! Thanks for the great vids. Headed to Hazlehurst before long maybe I can buy the shop lunch!

Thanks for the discount code, John. Made the speaker about $15 cheaper than amazon! Hope you’re enjoying OK, I’m from there but haven’t been home in almost a year.

Nice speaker John thank you for helping out on picking more tools out great job keep them coming

Love those Grips on the peg board.

Love the channel! And the speaker sounded great on my end. Mine is now on order!

Great video, the swivel socket tool is nice to have for the removal of the 3 bolts to remove the speaker pods.....dumbest thing ever!....but I need a service manual 17street, they do help me to be a unprofessional!

Can't 4 get the blue lock tite great video bro awesome speaker I have one to as well

I carry the same knife too. The Link's are awesome for the money.

love the shop tool suggestions.

Awesome video John. I have been building up my tools for my garage slowly. Seems like every time I work on my bikes or buy a new part I have to go buy that tool I need. I have a Bluetooth speaker in my garage and I love it. Probably not as nice as yours. I do have the SirusXM App on my iPad which plays through the speakers. Need to try that.

That wireless bluetooth speaker sounded sweet over my TV speakers. Clear and no vibration or crackle. Add that one to the wish list :)

Love the FLJ line!

Thanks, just ordered the speaker via your link!

Awesome vid great content. you and your channel rock . Peace and be safe out there.

Love the- Full Metal Jacket - reference ! Well done and informative video . Chris from Canada Eh !

As usual, great video John.

Another awesome video John,Thanks!

Nice video John, you forgot to mention who makes that awesome air chuck with the two outputs. I'd like to get one but can't fine anything like it on-line.

Just placed my order for the Kove Speaker!

I have 2 KOVE COMMUTERs... Badass LOUD, No Distortion !!

Thanks for the discount code, just purchased a speaker.

Good vid John. I kept thinking you were going to pull out a rod type magnet, telescoping type, but cha didn't!!!!! Say it ain't soooo john!!!

Is the tool set that the dealer sales a good set to use to keep on the bike? Didn’t know if they have most of the stuff you need in them. Love the videos man keep them coming.

I really wish this was written on a list

great video, been looking for a nice tool roll

super cool video, great editing and shooting!

There are Tools made in Europe called Sonic .. They sell tool kits for Brand specific repairs.. The neat thing is there is an organizer that has a spot for every tool .. Otherwise I would stick with American made grands like Armstrong Craftsman ect I have been buying Industrial brand tools for 1/3 the price as Snap on same quality ..

Thanks Man, T27 on order and will check out that blue tooth speaker have one but not that nice

Liked the video John Worked at Caterpillar Dealership in Vegas Your lucky you don’t have to lock your shit up With multiple shifts going on where I worked back in the day there were thief’s running wild till the bitches got caught So much for integrity among your fellow man😝

_"Fone Addiction's bad HhmmmK?"_ ...but I digress, more important question is, What's in ya bike's tool pouch? ... hhmmm??? w00t! another fine production, Thanks

Thanks John great video 👍🏻👍🏻

Hey John come visit Upper Michigan, I work for Helicopter manufacturing company , tour the place Come see how we do what we do

Hey John, way cool vlog,man that is a lot of tools just amazing.👍😃

Nice setup, is there any tools that you don't use every day but you don't want to be without when doing particular jobs ?

Man I wish you still made videos

Great tips and advise. Thanks.

Its no surprise that Harley mechanics have the biggest and best tool kits.

The mega boom by UE is awesome speaker.

Thanks John. Great info!

Awesome thanks for the up load

Great stuff John! Good informative stuff so I subbed. Looking forward with more tutor and other stuff 👍👍

Thanks brotha I'll be getting more t27s in my box

I hate people that won't take the time to cut the tail off a zip-tie! Nice video!

Your videos is really nice to follow, thanks Bro 👍✋👊

Awesome videos and now my stupid question what do harley stores do with dented or damaged parts

T-27's hold most of my Buell together..when its not torn apart...

Great info! Very efficient setup. I'd be interested to see which lubs, cleaners, polishers and such you use as well. How you deal with the dirt and bring the bling. Peace.

Good video with great info.. Have a ?. Do you have an easy way or trick to check tire pressure or put air in the rear tire on the touring models. Specifically a 2017 Roadglide. Had a 2009 Ultra and thought they may have done something about this PIA!

Been watching for a while, your videos make me moist, thanks bro 🤘🏻

JBL Flip 3 - dual subs - loud! $20 bucks cheaper than discounted Kove. ratings on Amazon, compare the 2. good vid man. thx.

John what size torque wrenches do we need to work on newer touring bikes…ft-lb and in-lb Love the content

Hey John I haven't seen ya for a while. I see ya got a few more subs, good on ya br .. You still riding that same peace af cheet! Kiddn. N ice scoot, bra. See yall on the road

A 6" adjustable wrench. The original American Metric wrench. It'll fill in for you till you spring for metric wrench sets.

Gonna show us your big box? OK, I'm in

When you strip out the T27 bolt because you’re using a T25 you can then tap in a T30 to get the bolt out. Don’t ask me how I know this, but it involves a derby cover.

Kershaw! Great Choice!

Thoughts on motorcycle lifts vs motorcycle jacks? trying to decide if the extra 400 for a full lift is worth it.

John, thank you for the extra video on what tools you have on and in your Cart. What would you need Duct Tape for? I saw a roll in your bottom drawer. That speaker sounds really good.

Tipe for ur new speaker after u wash up to leave for the day . Plug it speaker in. As the li ast thing before y li u hit the door. That's what I do h always have a fully charged speaker for the next day. MUSIC GET ME THROUGH THE DAY