HARLEY DAVIDSON Speedo CONDENSATION Fix 

First want to thank you for your videos on the fogging speedo problem. I too have the same problem with my 2019 softail slim. I used your video where you took apart the speedo that quit working after you drilled it, to drill my own speedo accurately. 2nd I want to let you and others know this worked for me, and my speedo works just fine and no longer fogs up. I live in southwest Oregon so have plenty of humidity. I used your video of the disassembly of the non-working speedo to precisely drill 2 holes in the back of my speedo. Just got back from a 3-day ride on the Oregon Northern California coast with absolutely no fogging at all. Inside the speedo where you drilled your hole, I also drilled in the bottom corners of that center piece where the internals of the speedo are a bit tapered and appears to be room to miss the internal workings. I put 2 1/8-inch holes one in each bottom corner, I also did not allow the drill bit to penetrate any more than necessary to make a small air hole. Not real familiar with how to post, pics ect. on RU-vid, but I do have pictures of the back of my speedo where I drilled, I will try to post them. Thanks, sorry it took trashing your speedo but hopefully it helps others as it did me. Without your video I would still be putting up with a fogged-up speedo every time.

Thanks for this, I'll look forward to your update before tackling mine 😉

Good vid, I've got a 2005 Softail which suffers the same fogging, and I'm sure it's prevalent in many previous years as well, just one of those 'nuances' that comes with being a Harley owner. Looking forward to seeing how your fix goes.

Thanks my Friend

Thanks for the Tip. Im from Brazil and i have the same problem when is SUMMER. In the winter is ok. I will try this. After i gave you a Feedback... Thanks so much.

I have the same issue on my 21 heritage but not as much as yours but definitely in the same place

hi , I´m from Brazil and I have fatbot 2018 flfb with the same issue. Could you please share if your action fixed the problem?.. Thanks!!!

I've had the same problem with my 2014 FXDWG. I used a LED light along the side of the speedo to determine where the logic boards were located & drilled two 2mm holes on opposite sides to avoid touching the boards. Problem solved. I live in Australia in the tropical north.

I have this problem with my 2005 FLHRCI Road King. It's a general thing.

Every comment I see with this problem is with tank mounted gauges. Does anyone have this issue on a bagger with fairing mounted gauges?

I drilled two small holes in 2018 Heritage and I live in Florida. Drive in fog and rain had not had a problem

Mine had this issue, harley changed it under warranty. 8 months later no issue at all

i drilled a hole in mine and it ended up worse, i rode on a foggy morning and the hole allowed it to collect a lot of water,

Really? The new models still have this problem?

It is annoying to have the condensation but I think I'll live with it until they fix it.

My 2018 Slim has the same issue, so annoying and shouldn’t happen on a premium motorcycle

😞 ρяσмσѕм

Keep the hose off yer speedo when you wash the bike

I may have the solution. I put two small bags of moisture absorber next to the module. You get these small bags when you buy something, it's in the package... No more fog!

Break the glass, remove the broken glass pieces, fill void with epoxy (color of your choice), problem solved. Knowing your presice speed is highly overrated.

Piss poor engineering from Harley Davidson.

waste of time replacing it with the same thing , the stupid harley dealers know they are all the same ,, my 19 year heritage is the same ;;

nonsense i did that , made it worse