Harley Davidson Tip Over Style Saddlebag Guards from Amazon | Great Value 

You may have seen these performance west coast style saddlebag guards recently released by Harley Davidson and from a few other aftermarket companies. Well they are super expensive running from $400 to $700 depending on the brand and options selected...this seemed a bit much so I went on the hunt to find a set that are less expensive yet are a good quality. In this video I share with you where I found a set meeting those criteria and show you how to install them and where to buy them with links in the video description so you too can save a bunch of $$$$ as compared to other brands in the market. Please watch, like, share, comment and subscribe. When you do subscribe, leave a comment below stating, "I Subscribed" so I can reach out and thank you for supporting the channel. Thanks for watching and ride safe! Rick HDVIBE

Just installed these on my 21 HD Roadglide special!! Thank you very much for the video! Your measurement for cutting the saddlebag brace was spot on. Always very informative videos.

Appreciate the Real world content. We work hard for our money, so showing parts that get the same part for a reasonable price is what we need.

Been looking at these for a minute. Love what you did. Thanks.

In my opinion, the Harley Davidson ones look better. Looks are subjective though. I’m interested to see how well they protect the bike when you fall. I know my TCMT crash guards work great, so I wonder how these hold up! Great video Rick!

Your video popped up on my you tube. I subscribed and actually shared it with my brother. Thank you for the information.

I bought a set for my 24 RoadGlide, the bars fit right up, however my aftermarket Mustang seat doesn't sit properly. The pan sits on top of the bar, where it's slightly rounded. the exact fitment is off, you can still secure the seat but it's a process, also on a long ride where the seat contacts the Upper bar on top of the frame will cause some extreme discomfort after about 3 to 5 hours riding. Most of my trips are 10 to 13hrs. I've Ridden on a few long trips prior to installing these crash guards with no issues. Even on SADDLEMANS site there's a warning that SEAT WILL NOT WORK WITH CRASH BARS. Pretty sad when you spend this kind of money for a GREAT SEAT, SADDLEMAN or MUSTANG and they won't work with saddlebag guards...😢

Yes, Sir, those are dang sweet! I've got the OG not yo daddys bars front and rear on my 1 year color of Black Jack Metallic and Chrome, and I did go with the black bars on my 21 FLHXS. Can't wait to see if you get the front bar and then do a test pick up on yours to see if its any easier to pick up with those bars than the stock style...

Glad you tried these rick,have been looking at them for my 13 street glide,I’ll definitely order a set👍👍

That’s really cool. My Santoro front crash bar was like $420. Thank you for the info. Have same bike. 🎉🎉🎉🎉🎉

This is awesome! 😎

Hi Rick I've just ordered a set of these after watching your video. Cheers mate. Ps free shipping to the UK.

Just subscribe, the bars look great been looking for some. Was wondering would they work with extended bags

Just subscribed and love the content. Do you think they make a front version compatible with the CVO chin spoiler or will it require modification?

Those are awesome and look great, much sturdier than the other thin crap, not sure about the roller end cap 😂… I’d stay with the slider style end caps

I like these. I might give them a try!

Great video Rick. If/when I am ready to get a 2024 street glide I would put these on the back and front. Question. Can you use these to help pick the bike up when it falls over?

for the rollers just use skateboard wheels. You have to modify them to fit but they work fine.

Yes, the same brand. I was very disappointed.

I wonder if those guards would make it easier to grab onto when lifting the bike from a tip over

Shame even HD doesn't make them in chrome. Again the MoCo missing out on a chunk of the market

👍 good protection 👍

Dang I got the same floor as you with matching color, the same bike but not the same color and the same saddlebag guards I ordered last week. I’m trying to be like you 😂

Nice, but now the engine guards gotta go too! 😮

Does the rear tipover protection affect the passenger at all?

Nice looking guards!! Too bad they don’t come in chrome!!

I just ordered the same ones last week, but off of eBay. With red spacers and black sliders. Hopefully the Microsoft crash isn’t going to delay the shipping to bad. I ordered them just in time to get them before Sturgis. But then the Microsoft software update crashed almost every flight scheduler worldwide. So now who knows.

I like the style. I have the Santoro Fabworks. 👍🏽

Do you can think they will fit the pre Rushmore touring bikes. It looks like they will

So would the Amazon colored ends fit the harley flat out bar? I'm definitely looking into these as they look great.

Very nice brotha

I was looking for these on the Harley site and apparently the Harley ones only fit 2023 and later bikes?? Why 😂

Great look.

Santoro are the best quality

A couple of quick questions, if I may? Where you cut the bar, do you treat it so it doesn't rust? What made you decide to go with the black? As far as styling goes, o have mixed emotions. Could those pucks dig in and cause the bike to tumble on a slide? I suppose the rolling pucks would fend that off. Great job as always, Rick. On another note, I'm installing OEM heated grips on the Revival. I know you've done a few. I'll have to go back and rewatch those videos.

They look really good. Question. Are they 1in 1/4 or 1in 1/2 thick

I bought 2 sets and had to return them because they were poorly made. Total crap not worth the money and not powder coated but spray painted badly. They must have sent you a hand-pick set because you made a video.

Tip it over. Let's see how they actually protect the bike

Do they make front also?

Will the big rollers fit on the top as well or only the bottom??

Why are you dropping your bike "several times".. Are you a shorter rider or something?

Cool. 👊👊

Rick, i have liked your video channel but putting skateboard wheels on a custom harley in my opinion is cheesy looking. Again imo, to each his own, but can you show how those work when the bike is dropped at slow moving speeds repeatedly. I bought the motorcycle drop guards that you did a video on after you showed in the video how extremely well they protect the bike and primary cover when the bike is repeatedly dropped while training. I will say younwere right in that the motorcycle drop guards have worked incredibly well, and I say this after i have personally, repeatedly dropped my bike while developing motor officer slow speed skills in training. The drop guards have been the best investment i have made for my skills and my bike, and most dont see them until I point them out, but now you are pushing these skateboard wheels, so are they better than the drop guards? Hopefully this isnt the case, but it seems like your channel is becoming a paid advertisement channel like the be the boss guy who is looking to make money on anything and everything. I watch ride like a pro and they only endorse motorcycle drop guards, and Jerry still says they offer the best protection and he hasn't endorsed any other product for protection. Thanks

I'm sure these are straight from China, but the $400 Harley ones come from Vietnam, I just bought them yesterday. Total BS.

They look like frame sliders from a sport bike . Not my cup of tea.

I have the real not yo daddies crash bars on my bike. I support American made products.as far as I know Santoro started the crash bar trend and everyone else including Harley copied them with the looks and replaceable sliders. I’ve been on the phone with them several times and their customer service has always been excellent. Even returning my calls and voicemails the same day as with the other companies I dealt with. Santoro, Sawicki, fuel moto, to name a few. I’m not into supporting knockoff China made garbage that hurts small American businesses. I’m all for saving money but not like this. All my aftermarket parts come from the original manufacturer. I paid the 100 bucks for my Cadillac wheels from Santoro. Besides that you late to the party with this video. These style crash bars have been out for years now.

Do not buy these. Three weld angles were off on both sides. Returning them and buying the name brand instead. This is what happens when trying to save some money. Spend the money on good ones.

These look like they are fake santoro fabworks not your daddy’s saddlebag guards.

Chinese knockoffs of Santoro. Nope! I don’t support IP infringement.

No way!!! Looks like shit.

No man, those are terrible. Your bike looked great before you put that crap on it. It flowed from front to back. Chromed in just the right spots. I wouldn't even put those on my bike if they were Free!!!