Harmar AL100 Vehicle Lift install - Featuring Automatic lock-down arm and swing-away 

I think I have mentioned before that I have been working privately as a hobby out of my home garage with handicap mobility equipment here in Florida starting my 13th year now. I mostly work with used equipment but HAVE bought 2 brand new Harmar AL-100s in the box and have never seen the emergency crank for if the power should fail. What I do is buy cheap (used) 3/8" drive ratchets and 3/8" hex sockets at car shows and provide them to my customers with each lift I install.There is a plastic plug in the top of the motor box that is removed and there is a 3/8" male hex to put the 3/8" socket on to raise or lower the lift, again in the event of a power failure. I wrap them in a soft micro-fiber cloth and put in the driver's side door panel pocket. I also believe (And I have told Harmar) that the light on the lift should have a clear cover and utilize a bright LED bulb to aid folks in loading and unloading in the dark.

Great video. Made installation a breeze. Thanks a lot.

My AL-100 platform is now bent. When lowering my scooter the left side reaches the ground first. My truck was down for a year, soon as I began using this new lift the platform bent and looked warped. I have a Pride ZT10 that has two motors on the scooter why it can turn sharp on a dime and have four wheels. The ZT10 total weight is 250 pounds, which sounds fine below the weight limit, but the problem is the majority of the weight is the two motors in the back of the scooter, so way more weight on the left side where the AL100 warped. But paying $3,100 for this lift I am upset. No vehicle hit it, I added brakes and turn lights to the lift keep people back further. I can park the scooter on the AL100 opposite make the lift warp the other way or catch it when it is back level, then have a fabrication shop strengthen the lift with more cross members, but a customer should not have to do that.

Thanks for a great video. Is anything like it available in the UK?

very informative video. I lost the safety pin for the swing away. any suggestions for where to buy a new one?

I need video to strap down the chair and adjust ramp for chair

My liftgate warning has been coming on since I installed the lift. Also, the tailgate will not automatically raise. The remote will open the liftgate but it won't raise automatically. Any idea what is wrong?

For the license plate light, does the wiring harness power that light, or do you have to use the wiring harness that is usually installed with the trailer hitch for trailer lights?

How to change the moter on that lift

Is there a remote controll w this lift I need a rolator walker also to assist w me walking