Haunted Mansion Bust Projection

Подписаться 77 тыс.

Просмотров 11 тыс.

50% 1

Join me for the wrap-up of this Haunted Mansion-inspired build where I use insulation foam and a small projector to make one of the singing busts! You won't want to miss it.
The Hauntley's animated bust from Mindscope Products is currently unavailable from the manufacturer and Spirit Halloween, but you may be able to find them on online auction sites.
Part 1 of this build - • DIY Haunted Mansion-In...
Plaque painting - • I 3D Printed a LIFE SI...
BECOME A SUPPORTER!
Would you like to support the growth of my channel? Consider becoming a Patreon supporter and help me create even more great videos! / vanoaksprops
OFFICIAL VANOAKS PROPS MERCH:
shop.vanoaksprops.com
MATERIALS:
(please note: Amazon sellers may change the products sold via these links without notice)
----------------------
XPS Insulation Foam
White Gorilla Glue - amzn.to/3uKpH05
Paintable Caulking - amzn.to/3P3op7i
6mm EVA Foam - amzn.to/49DBqNc
3mm EVA Foam - amzn.to/3SRWs3m
Chip Brushes - amzn.to/49xUFHH
Razor Blades - amzn.to/49yitvi
PAINTS:
----------------------
Drylok ORIGINAL Masonry Sealer - amzn.to/49yiFe0
Black Acrylic - amzn.to/4c9nFrc
Raw Umber Acrylic - amzn.to/3P8Lu8v
Fern Green Acrylic - amzn.to/49GB9co
SUPPORT IN OTHER WAYS (using these affiliate links costs you nothing but is a BIG help to my channel):
----------------------
• Shop using my Amazon Store - www.amazon.com/shop/vanoaksprops
• Ustellar Lighting - www.ustellar.com/?ref=vanoaks...
• Novostellar Lighting - www.novostella.net/?ref=vanoa...
• Polymaker Filament - us.polymaker.com/?aff=324
• Bambu Labs 3D Printers - shareasale.com/r.cfm?b=228215...
• Elegoo 3D Printers & Filaments - shareasale.com/r.cfm?b=168032...
• NSabers - Save 7% with code VANOAKSPROPS - nsabers.com/?ref=vanoaksprops
INSTAGRAM: @vanoaksprops
The Singing Busts are a group of undead characters who appear in every version of the attraction except for Mystic Manor and whom act as the lead singers of Grim Grinning Ghosts in the Graveyard.
From left to right, the names of the busts are Rollo Rumkin (Verne Rowe), Uncle Theodore (Thurl Ravenscroft), Cousin Algernon (Chuck Schroeder), Ned Nub (Jay Meyer) and Phineas P. Pock (Bob Ebright).
In every direct version of the Haunted Mansion, the five busts appear in the graveyard sequence singing Grim Grinning Ghosts. The lead singer of the group comes in the form of Uncle Theodore, whose bust is damaged and has its head section broken off.
DISCLAIMER: Links included in this description may be affiliate links. I may receive a commission if you purchase a product or service via the links provided above. There is no additional charge to you; it helps support this channel!
#VanOaksProps

Хобби

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@JonathanBorretti 5 месяцев назад

Condragulations, you're the winner of this week's challenge!

@VanOaksProps 5 месяцев назад

I will gladly take the 5 thousand dollahs

@thelifehalloween1031 5 месяцев назад

A drag race reference!?!?! I approve :)

@torsloke 5 месяцев назад

Awesome as always! If you wanted to skip some intermediary steps you can cut apart a thrift store shirt and jacket, run them through some monster mud, and lay them on the bust. I’ve done that before and it comes out great.

@VanOaksProps 5 месяцев назад

Great tip!

@willybeezy2775 5 месяцев назад

That's absolutely amazing. Notifications are always on for more awesome content. Keep up the amazing work as always. Hope you're doing well.

@VanOaksProps 4 месяца назад

Thanks! You too!

@JBIRDRN8 5 месяцев назад

Wow such great work!

@VanOaksProps 5 месяцев назад

Thanks a lot!

@SummersideDiver 5 месяцев назад

Awesome job! I love watching your videos. I’ve picked up quite a few different ideas on how to accomplish our builds, and really enjoy seeing your techniques. Thank you!

@VanOaksProps 5 месяцев назад

Glad you like them!

@meloneeleddington7664 4 месяца назад

Looks amazing, I think a top hat would look good on him. I enjoy watching how creative and talented you are. Wish I could come see your haunt in person. If you have kids they are lucky to have such cool and creative parents. Keep the fun and inspiring videos coming. So go make something. Lol 🙂🧡

@GoreGirlFX 5 месяцев назад

That turned out fantastic!!

@MROC66 5 месяцев назад

AMAZING!

@melissasmith7069 5 месяцев назад

So cool 😎.

@101scetch 4 месяца назад

Hi there. I found your channel a couple of weeks ago and have been meaning to subscribe and now I’ve finally done it. I thoroughly enjoy watching your channel because I enjoy making stuff myself. You’ve taught me a lot of tips and tricks, so I say, thank you very much for that. Please keep up the great work that you do because you do it so well. Blessings to you from England.

@VanOaksProps 4 месяца назад

Cheers! And thanks for watching.

@TonyBullard 5 месяцев назад

1:07 I lol'd

@zns72 5 месяцев назад

Awesome job as usual. Loved the rework with the Hauntley’s Head.

@VanOaksProps 5 месяцев назад

Thanks a bunch!

@blackmarketoutpost 4 месяца назад

Fantastic your array of skills is super inspiring I want to try new things every time I see your work!!

@onewaydown 4 месяца назад

I went the more involved route for mine. I 3D printed all 5 heads from Etsy, so they'd look nice sitting out during the day. Thanks to you for your awesome tutorials! Over a few months, I whipped up 10 HM tombstones and 5 bases for the busts with your tombstone and masonry sealer/weathering techniques. Hardest part was getting the videos sorted and projection lined up but it turned out pretty darned good!

@VanOaksProps 4 месяца назад

That sounds awesome!

@classifiedfive4377 4 месяца назад

Id like to see a tutorial of your urns I noticed you have a few in your Etsy store. Loved to add those to my haunt.

@thearthound 5 месяцев назад

Excellent, as always.

@VanOaksProps 5 месяцев назад

Thanks again!

@ageandtreachery 5 месяцев назад

Awesome,, I think adding some features to the head would help too. Like a hairline, ears....etc.. And shouldn't interfere with the projection...

@VanOaksProps 5 месяцев назад

I think so too.

@flywithbart 5 месяцев назад

The more I think about this more ideas I am formulating and I don't know if I need to formulate any more ideas! How do you keep the head on so it doesn't get knocked off by accident but is still removable for overnight?

@VanOaksProps 5 месяцев назад

Hahahaha

@cesaraugustomorenomolina8158 4 месяца назад

Hot glue and desperation 😂

@Erika-Raf 3 месяца назад

I had this same exact idea when I saw the other guy's youtube channel. I take it you just hooked up a thumb-drive in the back? Would like to see the "tech" part of the build, not to mention how to sync 5 heads to "Grim Grinning Ghosts" ...

@VanOaksProps 3 месяца назад

There's a USB connection that I added in the back, which you can see in the video, that connect to a USB port on the projector itself to add/remove video files from its internal memory. As far as sync goes, I think you'd need a completely different setup since they'd likely drift out of sync if you had each one operating independently.

@JamesABeckHouse 5 месяцев назад

FANtasatic build!! Is the plaque available to purchase?

@VanOaksProps 5 месяцев назад

I offer custom plaques in my etsy shop - vanoaksprops.etsy.com

@robertrisley9247 5 месяцев назад

Awesome build! 👏

@joebenzz 5 месяцев назад

Not so foolish mortal 👍

@johnrobertd748 5 месяцев назад

While there's sunshine? Haha. Here we're being buried under snow

@GregPackard 5 месяцев назад

Cool project! I didn’t see a link for the projection head… I’m sure it is my mobile OS…;)

@VanOaksProps 5 месяцев назад

Thank you, my friend. Unfortunately, you can only find them on ebay these days, but the markup isn't too bad.

@TheDarthBobul 4 месяца назад

Would love to do something like this but can’t find one of these units anywhere.

@VanOaksProps 4 месяца назад

I found mine on ebay.

@stalker42 5 месяцев назад

How did you paint the bandanna without it losing shape?

@VanOaksProps 5 месяцев назад

As the paint soaked in it actually became easier to style.

@robertrisley9247 4 месяца назад

How were you able to convert your singing bust face file from a MP3 or 4 file to a file that would play through the Hauntly's prop head? Can you recommend a program that would do that? Thank you!

@VanOaksProps 4 месяца назад

I found an online converter that would change the mp4 to the format the Hauntleys head accepts.

@robertrisley9247 4 месяца назад

Would you mind sharing a link to the converter you used? I appreciate you. Thanks.

@VanOaksProps 4 месяца назад

I used this one: mconverter.eu/convert/mp4/amv/

@robertrisley9247 4 месяца назад

@@VanOaksProps thank you, sir!

@daddymidwest4111 4 месяца назад

While I appreciate your expertise, and there’s no denying your talent or abilities, I’m not a fan of your reliance upon the 3-D printer. I enjoy how others utilize readily available materials. Just MY opinion though.

@VanOaksProps 4 месяца назад

Totally valid opinion.