Hi guys This is the first issue of that decoder since i have been used. So i could repair it and audio work perfectly. So don't care if you have this trouble. Don't forget to subscribe me and like and place a comment.
I have purchased same device...my doubt is can I use the default optical cable which came with this package...or want to but other good brand optical cable ?
That cable which came with package is a local optical cable. But I'm using it without any issue. So It's not a problem. But If you use a branded optical cable it's a better idea. But remember the local cable and original cable is very different. That different we can't feel when listening. Choise is yours I recommend to use original. Then you can satisfy with sound quality.😊
@@isharasandaruwan8480 I am not getting a 'click' sound when connected to optical like I get when connected to Tata sky. M using Amazon basics cable. Also there is no green light lit at D1, D2, D3. Is my device faulty? Anyone having same issue?
Hi! I tried the same wire paste as shown on your video, unfortunately the wire was too stiff and the BC1 capacitor broke up in many little pieces :( Do you know the vaule of the BC1 capacitor or could you measure it for me? Thanks!
Hi My HD audio rush is showing complaint like optical inputs and coaxial is not working. Let me know is there any service/repair center for this. If yes I can courier Expect your valuable reply
Some times in 5.1 mode central speeker sound decreasing. After press mode selecting button this will solve then after few minutes getting old complind. Pls tell anything solution
hello, i have this hd audio rush and i connect it to 5v/2a dc adapter, decoder work for 5 minutes and then shut down now i connect the same 5v/2a dc adapter... no power led lights up. Is it broken ? or i just need to get a 5v/1a dc adapter ?
i buy new 5v/1a dc adapter still no working no power led can you help me ? here is picture of board and video: drive.google.com/drive/folders/18vPsh7Qml-e7_KqEZN5P9E8xCVNkHOSP?usp=sharing
Bro, centre connection is disconnecting frequently in 5.1 optical select and 2.1 selection all 5 speakers are running with some noise. Is there any solution for this.
Yeah. Center reduce it's volume and rear increase it's volume. That affect from equalizer or surround in your input device. If you turn off surrounding on input device center and rear speakers will work in same volume. And If not balance your left and right channel, that reason will reduce center. Check your left and right input cable and connectors.
I had a audii rush and connected it with optical cable. But sound is coming only from tv speakers and it is not connected to home theater. Plz help me bro to connect to tv.
Check your digital output devices. 1st of all optical and coax need to get a small signal to work. What is your input device? Check your device's sound setting dolby acess on or off. I'll do a new video keep me subscribe May be it will help you
Hi bro goodmorning, Bro I purchased HD AUDIO Rush in shop not a online bro, bro one small problem bro 5speakers well working but centre speaker is suddenly offed bro after only surround speakers are activated bro what is this solution bro this problem please reply bro
This cause your input problem. Try to use lossless quality cables for input. If not trying many times switching 2.1 and 5.1 and again and agin would be solve your problem...
HI BRO Iam recently purchased this item and connects works perfectly for 15 minutes than power off automatically. iam conected 12 volts adapter(cabel settop box adapter).didnt work.iam purchase new 5 volte adapter and connected indicaters blinking but sound not comming. aux cable working but optical not working. Please tell me solution bro
Sure I think we don't need to make a video because we have a video check my channel. And you can select aux port to get surround. This decoder will decode stereo (left and right) to out 5.1 surround. Hope you understand And keep me subscribe. I planned to upload a video. On that I used aux cable to get surround may be it will be your answer 😊
Check your optical output device. And check caux port on decoder if caux port work correctly that means decoder's optical port is working check input device
Connect it to your amplifier then max volume in amplifier then if you can hear a noise from left and right it may be ic issue. If you can't hear q noise then power up amp ic which included 3 ic s in rush decoder
Hi bro. I am using this same device. Working fine but after few mins while using at medium volume in amplifier, centre speaker not working. Then after if pressed 2.1 to 5.1 button. One or two times. Then only working. I am using optical connection and 5.1 mode in this device. Did u know what problem is this.! Can u help me to solve this.?
Try to disable dolby digital plus mode then problem would be solved. If not this is a common issue on this decoder I'm facing too. But sometimes I changed surround mode 2.1 to 5.1 and again and again. Then it could fine center speaker working correct. Try it. I'll inform you by a video if I find a permanent solution 😉
Hi, Hd rush has stopped working, there is no sound, only the power diode is lit but the inputs D1, D2, D3 cannot be switched. Will connecting the wires, as in the video, help? Thanks
There are 2 transistor together. Check it. 5v power directly connected to those transistors. Like power transistors. Replace it according to numbers and try.
@@gabrielcacgnr yes I'm mí case turns out that the usb extension cable that I was using to power the device was the problem. So I'd recommend to try with many of these, even working cables seem to cause problems.
my decoder dont have any black wire u have showed. my decoder is not working. only one light is glowing and one light is not glowing. when it is new two red lights have showed. now only one light. one light which is under input button doesn't showing. wt happened tell me bro
LKR 3,124.00 34%OFF | Caldecott 5.1 CH audio decoder SPDIF Coaxial to RCA DTS AC3 Optical digital Amplifier Analog Converte amplifier HD Audio Rush a.aliexpress.com/_d64n400 Here but I don't know how about shipping. Too much charges
@@isharasandaruwan8480 I've facing the same issue with my decoder...so what is the remedy?? I watched a yt video that rectify this problem by connecting a diode with the power connection and the regulator ic..but the problem is my decoder has a different ic..it is a 5pin ic...so what should i do?? Could u help me??
after all, do you recomend the Audio converter to have a real 5.1 sound experience? and i have another question, i recently buy logitech z607 and it only has rca cables to conect, there is a special cable to conect via subwoofer ? or it is just as simple to conect the normal rca to the subwoofer and have a good experience with the bass?
Exactly decoder will decode only bass for subwoofer so it can make heavy bass. But th rca cable has small noises if cable too much long. It's better if you choose short and strong cable to connect subwoofer. I'm still using this decoder with rca cables and no problems occurred with sub. Hope you understand Subscribe for more videos😊
@@isharasandaruwan8480 do u get blue light change to green when connected to optical? Plz show tv settings when connected to Tata sky with optical, coz m getting hdmi audio sound from tv after attaching n no light change to green. M using it with 5.1 sony dav tz145 speakers. I think m not using any amplifier. What n where m getting wrong connection?
Hai sir 2 days back nenu e hd audio rush thisukunna kani center speaker lo low voice vasthundi & surround speakers lo kuda very low sound vasthundi please problem cheppandi. Madi 5.1 f & d hometheater
Sorry bro.. I can't understand this language but You are having low voice out on center speaker this is general situation cause your input analog signal left and right is different frequency check it or use optical. Then you will solve your problem. Don't bother this is a common issue on this decoder...😊
No BROTHER my main problem decoder to center speaker is low voice and surround back speakers is very very low sound .only front speakers is good sound. This is my problem back 2 surround speakers is very very poor sound
This situation cause may be a mono audio? What's your input option? Aux or optical? If you are using aux. Check left and right channels. If those 2 channels once engaged together this problem is occurring.. so check it..
Ayeth rewatenna ba Here is download link. Do you like it? sarigama.lk/sinhala-song/surendra-perera/ayeth-rawatenna-ba/7f7da35d-c2f1-40d6-9d34-4f999728bcb2
It's your choice if you can return this item you can go for a best one. I recommend this option. But if you gonna buy another one by keeping your old decoder in your hand. Let's try to repair before buy
Change your power connector ports if it loose little bit it will cut power frequently... Or use another power adaptor 5v 2A If power adapter fails to gain power more than recommended it will reset... After this 2 fix if it happens again use a 5v 3A or higher power adapter..
Turn max input. If you control from amplifier(not from input or decoder) and still affect noise check your amplifier. Should be issue with amp. Check it. Or send me a short video to know me better about issure/ noise
@@isharasandaruwan8480 myfriend ı have same tool but it is different pcb 2018 hd audio rush no sound both of them spdif port but 3.5 mm jack is active working and coaxial is it work ? ı dont know what can ı do ?
If cauxial doesn't work spdif should not work because it has a same digital converter for both input. If aux working without digital that means digital drivers is gone. May be it can be a switch problem. Does the decoder switch leds with switch button?🤔
Bro i have the same decoder..in 5.1 selection there is no voice but other digital sounds comes...and in 2.1 selection all the sounds including the voice comes. Please help me on this.
Try this video. Did you paste a wire that I did? Try it. If not solved your problem. Let's find out. And tell me in 5.1 selection is work with front speakers?
@@isharasandaruwan8480 I meant music..not any particular language. Our focus on your channel is content, not music or flashing message in screen. If you want your viewers to focus on your content better no music and flashing message on screen.