HDR50 - Full Break Down & Reassembly "Everything you need to know" 

No problem Brother! Thanks! Cheers

Your Welcome my friend! That was my goal! I'm Glad I could help all of you!

@@survivalcampman I would like to ask you about an issue I am having with my hdr50 11 joules and the Hdr68 16 joules. I purchased both of them with the upgrades already installed from the factory. Both pistols have started to leak air from the indicator button as soon as I puncture the Co2 cartridge. I have no idea why both of these guns started giving me this problem around the same time. I always spray silicone oil every 3 or 4 Co2 cartridges. Could you please give me an idea why this is happening? Thank you so much.

Everything is trial and error, process elimination, so of you say its comming from the pressure indicator, then the only reason(s) it would be leaking would be 1. The brass screw fitting is not screwed in and tightened all the way. 2. The O-ring that seals the brass fitting needs to be replaced, 3. The O-ring could have a kink or bend in it and simply needs to be losened, re positions then screwed back in. 4. The brass fittings themselves have defects and is causing the airleak, ( unlikely ) If you gi through all of these and there is still an air leak, then, we look into other possabilities, You can communicate with me Directly on my FB group page, Survival Camp, I will send a link. You you cant get this figured out, you can send me video or pictures so we can figure out exactly what to do.

Here is the FaceBook Group Link: m.facebook.com/groups/558780372317392/?ref=share&mibextid=NSMWBT

Here is a Link to the Chat for RU-vid Subscribers after you Join the Group: m.me/ch/AbYZmSHZikD9zVL4/ @@r.r3422

My pleasure! Happy to help brother!

Thanks Brother! Im glad I could provide the knowledge to you my friend, when i make these videos, my main idea behind one like this is, making a video that I wish exsisted, so if no one else is going to do it, then i have to do it! Lol I got many more like this of different guns, will be releasing them soon, hope you enjoy those too!

I surely wish I saw this content before I did my hdr50...😮 It came out a beast though OMG FRFR🤘😎👍💥🙏

No problem my Friend, Glad to help

@@Spitzname66 your Welocme!

@THELESSLETHALSPOT one has a different set up than the other, and the 7.5 cannot recieve the small round piece because there is not screw threads for it. I describe it the best I can. I am going to make a shorter condenced version, Any mistakes or things I can improve on, come out in future videos always correcting my old stuff. Admitting mistakes and providing new correct knowledge is how I roll my Brother! Thanks for watching!

No problem 👍 my friend! I will continue to bring more like this! I appreciate you

Yh man thanks 😊 ive got the uk version 7.5 but its piss poor man 😅 am i getting the kit with the o ring on the insert or the smooth one 🤔 as inside my cylinder there doesn't seem to be a space for any type of insert theres just four metal nodes opposite each other i dont think any of them will fit am i just stuck with the original stock reg and a dremmel 😅 cant wait to get my barrel man 😀

@@taureansoldier Hey Brother, How did you make out? Get any work done on it since this message?

Thank you my Friend!

You can also just drill open the hole the get 25j, the 25j that ansgear sells, all it is, is a slightly bigger hole then the 11j, ive opened my 11j to its maximum potential, and you only get about 8 to 16 shots per co2 tank if your lucky. But Ide feel extremely bad for the person on the other end in a self defense situation😅😅

@@survivalcampman just pull the valve block out. Sounds like a cannon but well, just try it for damage results. You must have the restricter plate in the top of the handle though or farting will occur.

Hey Brother, Its 1 inch Carbon adhesive, you can get a roll.from amazon, I use it on a few different guns, I like the look of Carbon.

@@survivalcampman cool, cool-thanks Bro! 🤟😎👍💥

You mean the little disc shape washer with a small hole in the middle?

Try to describe it a little better so I can help you, whats the issue? You cant figure out how to put it back together?

Your Welcome! Glad you enjoyed it my friend! Kudos!

No problem, Glad I could help!

Thank you brother!

@@survivalcampman thank you for helping others buddy ❤️

Hey, The 11J would be easier If you just bought the mod for it, since drilling either of them is more time consuming and difficult to do. It honestly depends on what you would find difficult, ide say just get the 11J and change the round screw disk inside the handle pressure chamber where the Co2 goes, and take out the Regulator piece, those 2 alone should be good enough

​​@@survivalcampman What do you mean with the regulator piece? The valve block?

Yes it works just like all the other spin and shoot systems, you want to pull that trigger and fast and steady or clean as possible. Where if you pull it slowly, it wont fire consistently

Hey brother, I might try that

Thank you! I am about to release a video of me doing a chrony test with the 7.5, there isnt much of a difference between the 2 since it just depends on how you decide to modify them, if you open the air valve to the same size they both work pretty well the same.

Hey Brother NP happy to provide to all my brothers in the world, I used a 1/16, and do NOT drill all the way through, you want to almost drill all the way through, when you get near the end, then you can start to open the whole by 1/10 of a mm at a time, you dont want the hole too big, about 2 to 3 times bigger then it originally was, remember you can only get so much FPS out of co2 cuz it only has 700 to 900 PSI of pressure depending on Temperature, if you make the hole too big, then you wont get as many shots from 1 tank, and make sure its the right hole, its tiny if you cant see if try using light to shine through, its the size of a human hair its tiny, so only make it 2 times to 3 times the original size, with a standard rubber ball which normally shoots 270fps to 310fps, without modifying, ude normally get about 45 shots on average, after modification, it will shoot at 375 to 500, depending on temperature, the first 12 shots are always the best, and you should be able to get 27 to 35 shots all together before it runs out. Also by adding on a barrel extension that is all the same diameter from load to tip, then that will increase it by 30 to 60 fps, just by adding on the extension. Also, ( it can take a long time to drill the hole, the metal is very dence and hard, using a hand drill will take a while) if you have a big powerful drill from a shop, then it wont take as long. But keep checking the hole after each time you retract drilling even if its just a 30 second session, check it every time, and if you cant see it good, use a small light, or a magnifying glass.

ok thanks for this big explanation. Your videos are helpful for me. You win a subscriber 😉

Let me know how to make out!

@@survivalcampman sorry if m'y english is not good, i'm from Belgium

@@mike75369 All good my Brother, RU-vid doesn't notify me on Comment Replies, So sorry to anyone that I miss

Thanks! & Correct. When the revolving cartrige lines up with the barrel the black air tube with 3 rounded slits moves forward slightly touching the projectile and at the same time give a spirt of Co2 or Air depending on your set up and Wella! it flies through the air.

That explosion happened because the doofis left a High pressure air tank with a 1100 psi regulator on it in the gun, and eventually it blew, its only designed for 800 to 950 max psi, although you can have 1100 psi in it for short term use. But he left it in his gun un attended for days. Its not smart to leave pressure in these guns, they need to be de- pressurized after each use.

The black pressure holding tube attatched to the firing mechanism has always been crimped they had no reason to make it a screw tight fit, because it was never designed to withstand anymore preasure then co2 pressure. When dumb a$$'s put in high pressure regulators 1100 plus and wonder why it exploded, well thats cuz there mentally challenged.

I‘ve called Umarex in germany and they said the same so that really makes sense 😅 I have also converted the gun to HPA but don't leave it overnight at 1100 PSI. Anyway thanks for the answer ✌️

Thanks! I used a 1/16 drill bit, and went %95 the way through. Then near the end carefully open it. It doesnt take much.

Im not sure what you mean, What part of the gun are you talking about? Sorry my friend, I am using google translation, Sometimes It does not translate good

@@survivalcampmanesce aria dalla valvola PIN ,sfiata

​@@turijdragonfly there might be dirt inside, it may need cleaning and use Silicone on the airtight parts, You may need new o-rings, I will send you links for a pack of O-rings and silicone. Try checking all air seal areas, and try wiping everything down and re-lubracating. Let me know if you fix the issue! O-rings LINK: www.amazon.ca/Dokpav-Assortment-Insulation-Professional-Connections/dp/B09NLM58XJ/ref=pd_ci_mcx_mh_mcx_views_0?pd_rd_w=Y1DB6&content-id=amzn1.sym.d89e4a4e-5696-4c12-9830-260f358f425a%3Aamzn1.symc.40e6a10e-cbc4-4fa5-81e3-4435ff64d03b&pf_rd_p=d89e4a4e-5696-4c12-9830-260f358f425a&pf_rd_r=3CHAQ32S8HQ470NWR1E4&pd_rd_wg=QyNeb&pd_rd_r=0b506e1d-18d7-4006-8a2b-aa32fe88f319&pd_rd_i=B09NLM58XJ Silicone LINK: www.amazon.ca/hz/mobile/mission?p=7TRwM9dEN9ZlHCvxD0EEatjnJGPA3RtlsLbfp9X2yKEqFq9UxR495QxF21fsANEcFY02mSCw68uD0jna6uGRO2e9agPEW4lg2j6hidj4R13B4Ar6wtPCGYx%2FRhADDgH25Z6XpI8L7Qy6gxBPSwZg95dS5scDAebzC1bBDYRtEw6QDhoelnIfF167qbhAH%2FtUvsP%2FHN8lK5JXsBp%2BK66eWud56%2Fc1BaaI%2FFAYBGJ2RT4Il5MuOpa9t4%2BWffuGwf%2BnlgaU92ojNqhyPeCiKIG1IRLN6oqL6ma7fyhuiicZqXb8CaRD%2F2od3fvuCkwBrl1a9WSXBHqQtru1CCCztpnHk1ug%2BOL2%2FQD%2FUE5%2Bp%2Fl7F3RqTiIEAz%2Bkcu2Bh8t0PnpaUEd38I7jEMaZ7y7GPNjek%2Be8zaSG4YFq2ddPZeQkoRzfuBJR5zD6hpw0efzqh7Yl&ref_=nb_sb_ss_di_ci_mcx_mi_ci-mcx-ksf1_5&crid=2STKMKGJXFDQ0

Thanks Brother, its either a Feyatcha laser or a Pinty laser from Amazon, the Low profile/pictinney also is a pictinney itself and can attach other things to it, no light, just a red Laser, thanks for watching my friend!

Is it rechargeable? 🙏

​@FLAlesslethal No but the battery lasts a long time, those batteries are cheap too usually get them from the Dollar store. But they do make the same one rechargeable, for a little more usually

Awesome!

Hey, No Problem My pleasure! Glad I could help!

Nice! Did you test it out on a chrony yet?

It screams isn't even the word for it- gotta wear ear muffs. Hey @survivalcampman i have a very important question about one spring in the 7.5. I took a picture. Can I show it to you. The markers finished but the trigger spring is wound the opposite way that yours shows. I gotta show you this bro it's crazy! And thanks for the video nice...

But it def screams! But I just gotta show you this it's bugging me as to how or why ? It's the 7.5 but I swear to you the trigger spring well the long side of the spring comes wound off the opposite side of yours crazy huh...

​@FLAlesslethal hey brother, for some reason youtube doesnt notify me when I get more replies on reply comments, I dont know how i missed this. If yoou find me on FB you can send the picture

Yes! I am ordering one soon, so as soon as I get it, ill make a video for that too! Thanks for watching and commenting! :)

Im glad someone out there enjoys my voice and listening to me lol! 260 awesome people so far if you Subscribed, Thank you! I put out a few videos a month

Probably not, it would not be necassary anyways, youd just have to drill open the gas escape hole the same diameter as the 16j hole. Basically, the best thing to do is, get a chrony, and slowly open the air hole by 1/10th's of a mm, or 1.6ths of a 1/16th, Your only going to get so much out of a Co2 tank and the size of a 16j air port is probably the max optimumization for it. I find 12.5 to 14.5 j is perfect, decent power fair amount of shots. Let me know your thoughts. Thanks for tuning in!

NO Brother! Dont cut any springs, that will ruin the whole mechanism.

Co2 only has so much psi pressure,750psi to 900psi (depending on temperature) so you can only get a rubber ball to maximize around 500 fps with a standard co2 tank. Also a barrel extension adds on an extra 40fps depending on length And if you decide to attach High Pressure air HPA to it, dont go above 1100psi and ALWAYS de-presdurize after each use. Even with Co2 it should be de-pressurized after each use. These things were designed to function the way they were built, you can only optimize them so much from original factory production state. Without completely changing the guns structure

Let me know your thoughts, Im hear to help anytime brother

@@survivalcampman Make sense! Thank you 👍🏻

@@ricardoneves356 NP, Anytime my Friend!

What do you mean? I covered everything