Headlamp Assembly Replacement: HOW TO ESCAPE

Подписаться 20 тыс.

Просмотров 65 тыс.

50% 1

This is a tutorial for removing your headlamp assembly to replace it or upgrade to an aftermarket product.
TORQUE SPECS:
- 3 x screws for headlamp housing = 4.8Nm = 42 lb-in
LINKS:
** HALOGEN HEADLAMPS **
LH Halogen Headlamp Assembly: amzn.to/2VBY1J7
RH Halogen Headlamp Assembly: amzn.to/2Vw49CQ
Halogen Headlamp Assembly (set): www.amazon.com...
** HID / XENON HEADLAMPS **
LH HID Headlamp Assembly: amzn.to/2WF0bYr
RH HID Headlamp Assembly: amzn.to/3t23JQA
Amazon Storefront for Lights/ Bulbs for 2013+ Ford Escapes:
www.amazon.com...
Bumper Cover Removal Tutorial: • Ford Escape Front Bump...
Bulb Replacement Tutorial: • Replacing High Beam, L...
There are 3 bolts for the headlamp assembly and the lower bolt is hidden by the bumper cover. To access this bolt, please see the Front Bumper Cover Removal video here: • Ford Escape Front Bump...
RAHRENA TIP: It may be the case that you're just replacing a single headlamp housing instead of both- if so, you may be able to get away with only removing that side of the bumper cover to access the bolt you need.
Pay special attention to fitment and alignment with body panels when reinstalling the lamp housings. Adjust as necessary for a consistent gap.
**Download the RAHRENA APP to have all our 2013+ Ford Escape videos, parts links, tips, specs, pictures, and more in your pocket!**
Google Play: apps.apple.com...
Apple App Store: apps.apple.com...
After Downloading, try out the app! For full TUTORIAL and PARTS content access, please consider supporting the channel and become an annual Member!: www.howtoescap...
#2013fordescape #2014fordescape #2015fordescape #2016fordescape #howtoescapewithrahrena #rahrena #diy #howtovideos #fordescape #fordkuga #2013fordkuga #2014fordkuga #2015fordkuga #2016fordkuga #fordescapeheadlights #headlightreplacement #fordescapebumpercoverremoval #fordescapediy #howtoremoveheadlights

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@TechMan042 2 года назад

Lord Jesus finally, thank you. A competent instructional video

@imacp2909 9 месяцев назад

I will Never, Never buy a Ford again. It's just cost me £95 to replace a side light bulb in a Kuga 2014. Fucking ridiculous.

@chewy2442 7 месяцев назад

Been searching around the interwebs for an answer, but have not had much luck, but does anyone know if you can add an extension to the headlight wiring? in my '17 Escape the driver side headlight (low beam) the wiring seems short and was thinking about putting an extension between the factory wiring and the bulb. Edit: i was able to get a piece of string around the wiring harness that fell inside the headlight assembly. Yes it was shorter for some reason, but giving it a slight yank, not hard to rip off the harness, i was able to pull more of the wiring out. It seemed to have been stuck inside somewhere. Once I got that little bit out, i was able to install the bulb like normal.

@HowToEscapeDIYTipsandReviews 7 месяцев назад

Thanks for the follow up! Yeah they can be a bit tight in those lamp housings. Sorry for the delay in response and glad you figured it out. I wouldn't think a short additional wire in-line would cause any real issue so long as the connections were robust and well insulated. Do you have the halogens or the HID headlights?

@chewy2442 7 месяцев назад

@@HowToEscapeDIYTipsandReviews Thanks for the reply. Halogen bulbs, replaced with similar.

@Beiberhole69RVA 3 года назад

Another solid video. Replacing my headlamps is something I was planning on doing within the next 12mo or so. Mine have some slight UV damage on the top side (doesn't affect the light throw forward), so it's purely just for cosmetic reasons. Thanks for keeping the uploads going!

@elizabethjones2507 8 месяцев назад

@rbrock00, it was mentioned several times that how to remove front bumper was in a linked video. Sometimes listening is ones greatest skill. This video was very helpful. Thank you.

@HowToEscapeDIYTipsandReviews 8 месяцев назад

Hah! I appreciate your response, Elizabeth! Glad you were able to get some info out of this and please give a shout if you have any questions

@TheMervK Год назад

Great instructional video. Thanks again and keep up the good work!

@HowToEscapeDIYTipsandReviews Год назад

Thank you so much! Give a shout if there is something in specific that you may need- hopefully we can help!

@rbrock00 Год назад

Since you have to remove the entire front of the car first, it would have been helpful to see how that was done. This video is therefore not much use to me.

@stevenoliveri2023 Год назад

I'm going to do a searech on HOW TO REMOVE FRONT BUMPER and see if they do have a video on it. My body shop charged me $50.00 a side to replace the headlight assembly.

@TheMervK Год назад

It helped me, now I learned how to change my headlamp!

@Roy-ng1xn 4 месяца назад

Tips for the 10mm bolt under the headlight to remove bumper. Any suggestions

@Kevin_Alexander Год назад

This didn't work for my 2020 Escape Hybrid Titanium. Could not get the front bumper off no matter how many bolts I took off. Help!

@shanepeter1616 2 года назад

Can the lens itself be removed? I've got UV damage and just want to remove and clean up the lens...don't really to need to replace an entire housing.

@onepunchhdbilly 7 дней назад

after i replaced both assemblies , the headlight aiming screws did not work to adjust the headlights. i was devistated. still haven't found a way to aim the lights, cant drive at night

@AbelGarcia-i6j Месяц назад

my 2020 Ford escape Titanium came with a 10mm screw and that I was able to reach with a rench thus keeping me from removing the bumper. :)

@rickyfox2535 11 месяцев назад

Great video , very informative as far as tools go and sequence , I had to replace the DS headlight lens on my 2015 escape a pain in the butt , i was able to use my 1/4 in air ratchet and 1/4 in low profile socket t 25 i believe it is , and get between the bumper cover and the the screw under the turn signal light out , less removing the bumper cover , long story short , thank you for the information , i never would have thought that they would put a screw in a location that would cause so much grief to replace a simple item. thank you again for all your expertise

@MrKen59 2 года назад

All I want to do is remove the black decorative cover under the headlamp assembly. Years ago I bought DRL modules that replace that cover and would like to replace it without taking the entire bumper off. I wish I could hold a lamp assembly in my hand to see how it’s configured. Curious, what is the estimated labor for replacement of the assembly? Thanks for the video.

@HowToEscapeDIYTipsandReviews 2 года назад

Hey there and sorry for the delay- I know exactly the DRL kit you're talking about (I believe!) - it is the little black strip under the front edges of the headlamps, right?

@stevenoliveri2023 Год назад

@@HowToEscapeDIYTipsandReviews That's probably what he means.

@leviatrus 2 месяца назад

It’s crazy how the manual for the car doesn’t tell you AT ALL to do what this video instructs and the video before this one… makes no sense to me🤣

@HowToEscapeDIYTipsandReviews 2 месяца назад

Sorry for the delay in response here- yes lol the manual isn't super helpful. The bulbs are good to know about, but that lower screw being covered by the bumper is a big ole pain. Thanks for commenting and for being a subscriber! Really appreciate the enthusiasm and support!

@matthewgonzalez8066 Год назад

How much do the parts usually run?

@dankmtg 3 года назад

Any idea or tips for a possible coolant leak and how to resolve? My 2013 SE seems to be fluctuating it’s temperature gage before it stays in the center. I noticed it triggers “Transmission Fault Service Now” then “Power Reduced to lower engine temperature” when I’m on longer trips,(more than 30 min and on the freeway). But in town I have no issues.