HealTech QuickShifter Easy Install & Setup 

I've found the Healtech to be fine in a sprint ST triple. The setting that says delay is to deal with our own variability in how we shift. By setting a longer delay with a higher threshold it stops the accidental cutting of the engine and it stops the variability of our shift action affecting the actual shift. The idea is to increase the delay to make sure enough time is given to reach the threshold and that it's not just an accidental slight tap of the gear lever. I thought your shifts seemed good at both low and high rpm. Removing any play in the linkages by renewing them Helps the feel a lot. I was so paranoid about over tightening the sensor that my gear arm was loose on the gear spindle... So I turned on the phone app and kept tightening the nut until I saw it was beginning to read on the sensitivity then of course back it off. This made sure the arm that the Bolt went through wasn't too tight but not too loose either. Very good video. Very clear diction and good camera work.

Took her out for twenty minutes or so today and i ramped the sensor sensitivity all the way up and it deffinetly made a big difference. I also put the cutoff delay to 10ms.. i might turn up the cut off delay alittle bit to see how the bike responds in coming days.

lovely video, thanks! I've been fortunate enough to test this lovely mod and it does cut the mustard really well! And the price is way better than the counter option's! I have to tell you this isn't the first HealTech stuff on my bike and won't be the last that's for sure! I love my GIpro as well and the Speedohealer is a must too... cheers!

Came from the healtech vid, me mum thought i was watching some softcore porn because of the background music lol

The one problem I have with your video is you don’t show how you hooked up the ignition wires??? Since you describe everything so well why not show us visually.....thanks!

Thanks for the vid Mate. I fitted mine tonight and it didnt take long as I had the heads up how to do it. Being the latest version it says it is adaptive so we will see. If not I will put it into expert mode and set the kill times.

nice vid thanks, i have a healtech on my 2015 kawa Z1000 and have to say i wouldnt use it below 5000 rpm as its crude to say the least and certainly not smooth and fluid, and even then only works well in the higher rev range if on the shift rod and not as advised by Healtech on the spline. this is just my opinion but no matter what settings you try the sensor is just not consistent enough for lower rev changes, works well enough in the high rev range which i guess is what a quickshifter is designed for. Anyway thanks for a nice informative vid.

Nice an easy on your blade but a different story on an R1 2005 , but with a great help from a friend success,just need dry weather for road test .

Ive fitted this unit but its always nice to watch somebody else do it so I can see Ive done nothing wrong

Fantastic write up!

Great video, what you recommend for my gsxr1000 2016, healtech or hm plus, I'm doing 75% road 25% track ? Great content, keep it up Lamb chops.

Video and discussion is extremely helpful. Thks all!

Great video! Looking to purchase a quick shift for my 2012 Speed Triple. This seems to be a good option. Looking forward to your performance review. Thanks!

Waiting for your on road test video.. Great vid.. Waiting for mine to arrive at least I know what to expect..

amazing video, so informative

Good vid just fitted one to my track bike ,slightly different set up as mine installs into injection connectors rather than plug which means I have to have bike running before Bluetooth will connect to phone

Very nice and professional video! Good job

Hello Please excuse my ignorance, but is this installation just plug and play or you need to adjust ECU etc,??

Cool vid. Very well explained. Look forward to see how this performs. It's got quite a mountain to climb to be as good/better than an HM unit Imho :-)

Chops......In your humble opinion, who makes the best quickshifter? I have a Healtec on my VFR 800 and I’m looking to install one on my Tiger 800 as Triumph don’t do one for my bike? Is Healtec one of the better ones still or are there others you know of.

Just put a video up on my page running the qse through the gears if you want to check it out.

Ive got one of these fitted to a gsxr1000 that i brought. I didnt install it and the sensor is attached to the top of the gear linkage rod, its not all that smooth when changing gear (clutchless) do you think i should move the sensor to where you have yours placed ?

Thanks for this review. I'm thinking of getting this unit. I currently have a Dynojet Power Commander V that is linked to my coils, do you know if I will be able to attach this unit without issue due to my Dynojet fuel management being connected? I take it the Dynojet should have some type of way to piggyback the Healtech QSE?

why you mount sensor on arm and not on rod?

hi, is this unit only for upshift or can it be used for downshift? thanks

Do you still need a power Commander unit for this?

What happens when you move the gearshift lever down instead of up? Does the sensor see a downward movement? (Shifting in the direction 6-5-4-3-2-1) Ps I don't want it to interrupt my ignition when I switch to first gear

Great video. Do you need to have Bluetooth on once installed or just for installation?

If I want to drive without the shifte, can i just pull out the small cable from the box? The sencor cable? Thanks from sweden

Can you give me your settings so i can try them out on my bike ? I hope it hasnt been pin locked ........

Looks like a neat kit, but there is no way the strain gauge is accurately measuring preload from that sensor on the bolt. I would be concerned about accurate preload and associated wear on the transmission parts over a proper inline strain gauge.

Can this quick shifter be connected to yahama-fzs ver2 with stock ECU or should we change the ECU for connecting the quick shifter

Next time my Dynojet one dies I'll be getting one of these

Fantastic Video

As it is a modification to the bike has anyone enquired as to how insurance companies will require for this mod?

Ive just installed healtech QS on my 07 cbr 1000.. have you also noticed the sensor is extremely sensitive?

what is diference in versions qse and iqse?

Thanks for the video. Curious though as to where your getting the kit with the sensor from as I note the following on the manufacturers web site :- "The QSE sensor is not available in the USA, Canada, United Kingdom, Germany, Italy, France, Spain, Japan and China due to patent claims in these countries. Available in all other countries through our distributors and dealers."

Hi.will.this fit my daytona 675 normal 2015 model ? Does it come with up and down shift both ? And does it work smoothly on a daytona ? Where to buy this if you ca share the link..your response will be highly appreciated

do you know any Quickshifter brands that make kits for old bikes with carberateurs? I got a Suzuki gs 500 and I want to build a track bike from it. But I don't know if it is needed to plug a Quickshifter in to the computer of the bike. Or just between the coils and the plugs. If you know what I mean.

I have honda cbr1000rr 2008 I got instal healtech quickshifter when I shift from first gear to second some time go to neutral can you give me advice how to make run better!

Nice one, hope it's good so we can get a group buy:)))

Can you still shift with the clutch even with this on ?

NIce Video. Thats what i´m looking for. When can i reckon with the 2nd part?

awesome video! quick question...is the install the same on a carb bike? the bike in question is a cbr600 steelie f3.

hey, do you have the "old" sensor or the new one? cause mine look different than yours. cheers

qual o preço do kiti

how do you know what to tune the timing to?

Other then that for the price you cant beat this thing

Lamb.... when you plugged the piggy back plugs in is their an order in which they should go? Like are they numbered? Also the 2 plugs with the red marker on do they both plug into the same coil pack or do you split them between 2 coil packs? Or and lastly does the red marked ones have a specific coil to go on? Thanks.

So once the settings are set, are they sent to the unit? or is it constantly querying your phone for its settings?

is this quick shifter up/down..?

Is that a lithium battery? If so what did you think of it?

can the quickshifter be connected directly to the power commander instead of ignition coils ?

I never use the clutch after take-off. Is this really much faster than burping the throttle?

Mine wont pair with out a code? Where is the pairing code from healtech?

Does this work for downshifts?

Hey mate, do you know a lot about quick shifters? Got a mate that’s fitted one and can’t get it to work on the road. Works perfectly on stand but not on road. Any ideas

Mine wants a 8 digit password 4325 won't work

What do you think? This is the best quickshifter or is iT the translogic ?

Application released for IOS recently.

only app?

Review update pls.

Is a dyno flash tune or power commander necessary with this setup??

I just wish they weren`t so damn expensive,,,...I need one bad because of a medical isue with my left foot,and left hand...I`ll keep saving money until I can get enough to buy one...

Hey lamb chop,what setting are you running on your healtech quickshifter?

Sweet... Are you testing it over the winter or waiting until warmer weather comes?

how you liking the qs now that you've had it a while. thanks

Can i install this on my hayabusa?

Lamby, how does this compare to the HM+?

Not Behhdddd - good size

As shown in the awesome video, it's relatively easy to mount this set. And the results are just awesome. This is a test-run in higher rpm range: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PLcBnk6NFkI.html

Chopsy, old video I know but I had hours of frustration trying to get this system to work properly on my R6. I eventually binned their strain gauge sensor off because it just would not work properly. Miss shifts at high rpm, etc etc. I fitted a normal Normally Open Ignitech pull quickshifter sensor, connected that up to the healtech control box, changed the settings for a normal sensor. Hey presto, the fucking thing starts working properly! All those hours wasted trying to get it to work properly. If I could do it again, I'd AVOID the healtech unit.

can you buy just the sensor because my sensor has got a nick in it?

what was the jumper plug for?

Depuis l installation j ai des faux points morts

What bike is this?

How can 25 people give a thumbs down to this! must be 25 nagging wives

Showed everything but how he bridges the connections. You may as well just read the instructions next time 😂

No lo recomiendo para HONDA VFR 800 vtec...no funciona bien...da problemas eléctricos

Easy if you rip the fuckin bike apart. God damn.

No Apple support. That’s pretty wanky. There’s other ones that support both iOS and droid

The worst quikshifter in the world!!!! The biggest crock!!! Broken the electrics component!!!

Is this quickshifter compatible with carburetted bikes? Thanks in advance...