Heinkel HE111 H4 Revell 1/48 - Part 3/3 Painting & Weathering [ENG SUBTITLE] 

Wow cool, thank you very much for this kind support!!!

I can not decide which aircraft is my favorite. There are so many beautiful planes from the past and present 😍 but yes, it‘s a beauty!

Thank you very much! Yours is a nice model, got it on my wishlist! Let me know, when you’re done with it 🤘🏼 Keep going 🤞🏼

Thank you for your comment! I love this style of cinematic revealtion, too. I try to get better with the quality :)

Thank very you for this comment! Gracie, greetings from Germany 🤘🏼

This is how I feel every time 👨🏻‍⚕️😂

Thank you mate 🤘🏼

Great advice! Thank you. Try it next time!

Thank you! Hope you’ll like the next one, too.

Thanks pal!

A good point! Didn’t saw it like a chipping technique. Yeah, the big one is to big on the tail, but on the wings could have been little chips.. Thanks for your comment 🤘🏼

Thanks mate! I give my best, all the time 🤘🏼

Thank you!

Oh yes. All Bombers of WWII are so iconic!

Oh yes! it could have been more pleasant if the owner had not already built it. 😁 but the result looks good to me.

Thank you very much!

Your welcome!

I try to keep my eyes open for some of these tapes, thanks! :)

You don’t wanna know how my kits looked like as i was a kid 🤪 it’s al about practice 🤘🏼

Thank you! Have fun! Show me your result, when you’re done :)

Thanks! It's on my wishlist :D!

Thank you! :) challenge yourself and try out. I bet you can do it!

I‘ll try to follow your steps! Thank for your comment! 👌🏼

Thanks for your information! I will buy maskingtape in different sizes or try different ways for masking bigger camouflage parts. Washing the plastic in a bath of soap should be good before starting the build!?

Thank you very much for your comment! I heard it several times now. I‘ll buy one for another build where i need it.

Thank you!

I have to find a technique for me, too. I try to wait a couple of hours (not minutes) when i set the varnish before i apply the masking tape.

It starts before priming. Ensure the surface is free of oil and grease by cleaning with IPA (alcohol 90% at least), then prime. Let dry for at least 24 to 48 hours or until it is cured. Sand very lightly to eliminate any bumps. You should wear gloves from now on to handle the model or clean it again with water, this time before spraying paint. Let it cure again for 24 to 48 hours. Sand lightly again. If you follow this religiously, you will eliminate 99% of the masking tape tear-up. If you do tear up the paint, don't panic. It is fixable. You have two choices. You can remove the paint and primer to the nearest panel lines. Mask around, prime, sand, paint, sand, done. If not, you have to sand using progressively smaller grit (and I am talking starting with a sponge of 800, then 1000, 1200-1500, 2000, 3000, 5000, and 7000 to create a feathering between the paint/primer and the plastic. Please take your time and evaluate frequently to see if you're doing well. Clean with water, prime with successive light coats let cure and come back with light coats of paint until the edges disappear. Allow to dry to assess the work, and spray some more if it is not to your liking? If you see a ridge, start again with sanding. Remove some of the sticky stuff when masking by placing the tape on the back of your hand several times. If you follow this, tear-ups will become very rare.

Thank you for this munual! I will follow this steps!

Thank you! Yes, maybe a bit too much.. next time i don’t overdo!

​@@myplasticprojectsi seem to remember hving a he 110 , cant find reference to it anywhr ; false memory or can u help me out

@@brianmacc1934 you mean Messerschmitt BF110?

@@myplasticprojects no HE 110 , difference with 111 was top gun turret ; it was cylinder shaped / revolving

Das war am Ende auch leider mein Gedanke 😩 jetzt muss sie erst recht gewaschen werden 🤪 Hoffe es hat dennoch gefallen!

@@myplasticprojects Nichts für ungut! Es war so ein Gedanke von mir. An und für sich haben Sie sehr schön gearbeitet! Alles Gute!

Konstruktive Kritik ist auch immer sehr willkommen bei mir! :)

Thank you for your comment! My channel is mostly about "learning" for myself. I just started my journey as a scale modeler and have never practiced the most of the techniques before. meanwhile, if you take a look at my instagram channel, you will notice I transposed many of the advices I got in the comments here. maybe you will find “your comment” in my posts I transposed already :) I hope will like my next build which is coming up in the next days!

HEY KUZMITCH1981...I think he did a marvelous job...the plane looks real and looks like it has been in a war, not like a shiney new toy...I think maybe someones jealous!