HEL Steel Braided Brake Lines Install | Yamaha R6 

Thank you for making actual ride review on these lines have been looking for this for a while

Here's a little tip for anyone trying to thread either a new Break Line or Clutch Cable (more applicable to clutch cables but whatever). Once you have your Clutch cable detached at both ends, use a Cable Tie or "Zip Tie" to tie one end from your old to one end of your new cable together, then simply just pull, gently swaying back and for to give it a bit of a wiggle, the cable will follow your new cable perfectly through all the cracks, gaps, holes and crevices that are in the way without having to remove fairings or other parts of the bike. Just bare in mind that you may have to still remove a small metal clip that is often used to keep all your wiring together however, this generally is accessible and takes little effort to remove and replace. 👍 ♥ Just a side note this may not be applicable to ALL bikes, I know for a fact that it works with Yamaha, Kawasaki, Triumph (Daytona models), KTM and Aprilla however I can't be sure about Ducati or Harley. Anyway I hope this helps some people.

Beautiful! That color adds to the overall beauty of your bike Chaos!

Great video, really well made and great music - thanks

I get to learn many new things from you dude thank God that I found your channel long ago😍👍

GOOD VIDEO THANKS FOR THE HINTS AND TIPS 👏🏼👏🏼💯🇬🇧

These looks amazing and i m Sure they performed even better. I think i need these

24 years on OEM rubber lines, no problems here but I will upgrade them this year.

Very simple and lucid explanation.

1:47 i can confirm that my 2017 R6 came with stupid rubber brake lines... such a pity since it wouldn't be that expensive for them to put on some steel braided ones stock

good job!!, works and looks so good

Should have just drained all the fluid from the system so that you can have air brakes :O

User manual says to replace the rubber brake pipes every 4 year, so they remain relatively stiff. However once you change to steel pipes you'll immediately notice if you sit back on a bike with rubber pipes. For example I have the steel pipes on mine, and a few weeks ago I tested the 2018 MT-10 and MT-09 and both have rubber pipes, and the whole brake-feeling was just so bumpy. I felt like the brakes are not precise enough. So yeah, if anyone asks me the steel braided pipes are must haves :) cheers

Bleeding dry system is easier when done from bottom up. Attach a hose to to caliper bleeder valve and use a syringe to push fluid upwards. You don't have to do it perfectly, just enough so the system is primed with brake fluid. After that bleed the brakes conventionally.

Wonderful song

Great video bro.

I have hel brake lines on my xj6 for more than an year and it's been flawless!

I upgraded to steel braided lines in my CBR so that my angry ex girlfriend can't cut them through :-\

Even if you have a newer R6, changing those lame rubber hoses to steel braided lines makes a world of a difference.

i was thinking of getting them on the 2018 cbr500r of mine just for the hell of it, the brakes on the cbr usually gets the worse opinons that theyre weak so i might give that a go, its a single front brake disc as well so it shouldnt break the bank.

Nice 👍🏾

quick bleed screws ftw!

In your opinion whst should one pay for a secondhand 2009 r6

It's not complete until you put a Brembo RCS19 master cylinder on too. The upgrade was as noticeable as removing the PAIR Valve (massive engine braking upgrade).

IVE SEEN GLOW IN THE DARK BRAIDED CABLES BY GOODRIDGE 💯👌🏼

Polish your headers :-). The brake lines look awesome been considering it for my bike.

Top job brother 👏👏 the Hell braided lines look awesome 😉 especially in the red to match your bike and they definitely do make a difference I can vouch for that as ive got them on my Daytona 675R so yup definitely a great mod for any sports bike. I've said it before and I'll say it again I 💯 think you should powder coat your rims red imo it would definitely add sex appeal to your R6 for sure other than that cosmetically its 🔥 bro

I love your vids keep it up

Where in South Africa did u order the Hel lines from?

Service schedule says to replace master cylinder and calliper seals every 2 years.

Does anyone know the line length for 09 r6? Trying to order from core moto

Do you know the lenght of yours new brake fluid lines?

these brake lines made ur bike even sexier

Hey dude, where did you buy the kit from? Or did you have it imported?

That hat! 🤣🤣🤣

I Seen some videos in my search that says 3-5 years we should replace them. Thus my wallet will open to steel braided 👌

Next change: bring back your mirrors bro. Those bar ends look cafe racer and totally stand away from the look of the bike. Besides mirrors are so important I can't even think of riding without both of them. Please bring the mirrors back man! Looks really noob without them. Additionally you could get indicator mounted mirrors or something which looks futuristic.

Have you got merch yet?

Watching you freaks me out. I keep on forgetting that you are not in the states and the lanes are reversed.

I understand...With more powerful brakes, you can go faster at a turn and brake shorter. Yes. You will be faster overall. [PS Note: Yamaha recommends replacing brake hoses every four years] (i replaced the brake lines and the radiator hoses, all at once.)

Hello, i hope you won't be mad because i will be using some of this video to make a compilation video also i will credit you on my video. Thank you

Nice mod

H - E SINGLE L...

It does look beautiful but still i can't believe my moded xrm125 smoked an r3lol

price of hoses

:)

In Europe all european bikes have metal braided lines, Rubber lines should be illegal and only for bike with 50cc engines

even after 10 years your bike is rustless

U.U