Helicopter Main Rotor Head Working Animation | Solidworks

Подписаться 63 тыс.

Просмотров 713 тыс.

50% 1

RC Helicopter Main Rotor Head Mechanism Animation (Including Swashplate) in Solidworks
This Helicopter Main Rotor Head/Blade System All Parts Design, Assembly and Motion Study/Animation are Entirely Created in Solidworks Software. This video is a simple demonstration of How Helicopter Fly/Works & how Swash plate mechanism is used for changing the Rotor Blade Pitch Angle in order to control the Collective and Pitch, that helps a helicopter in take off, landing and moving forward-backward-left-right.
This RC Helicopter Main Rotor Head Mechanism Consists of:
1. Base ( with Bearing & Anti-Rotation Bracket)
2. Servo Motor
3. Control Links (controls Swashplate Movement)
4. Pitch Links (controls Main Rotor holder)
5. Swashplate (used to transmit pilot's commands like Pitch Control,Roll, Collective to the Main Rotor Blade of the Helicopter. This way Helicopter can be moved Up-down, left-right, forward-backward.
6. Main Rotor Housing
7. Main Rotor Blade Holder
8. Shafts & Necessary Fasteners
9. Rotor Blades
1. Part -1 RC Helicopter Main Rotor Head All Parts Design Tutorial in Solidworks
• Helicopter Main Rotor ...
2. Part-2 RC Helicopter Main Rotor Head Assembly Tutorial in Solidworks
• Helicopter Main Rotor ...
3. Part-3 RC Helicopter Main Rotor Head Motion Study/Animation Tutorial in Solidworks
• Helicopter Main Rotor ...
4. Helicopter Swashplate Parts Design and Assembly in Solidworks
• Solidworks Tutorial: H...
Hope You Like it.
Do Share Your Opinion in the Comments.
Thanks for Watching.
Do Like Subscribe and Share.
Stay Connected for Such Animations.

Наука

Опубликовано:

27 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 194

@raouldemer2300 3 года назад

The best video about rotor head I have never seen

@user-ey1hs2dk9q 8 месяцев назад

Почитал комментарии , видно что ещё есть грамотные люди . Не всё ещё потеряно . Анимация отличная за исключением мелких ошибок . Благодарю всех 🙏👍

@amram1017 3 года назад

Beautiful! A work of art.

@lucacaleffi9396 2 года назад

It is so complex that it's a miracle every time an helicopter flies without crashing on the ground.

@stumpusMaximus Год назад

Just think that Leonardo da Vinci had drawn the first helicopter in the 15th century

@nosefirst Год назад

That miracle is called a "Pilot".

@nathanvandusen2166 Год назад

Its amazing how your fan works without crashing😂

@SuperPhunThyme9 Год назад

@@stumpusMaximus I mean yeah, sort of....still nothing quite like this...he designed a pretty basic crank powered air screw.. State of the art at the time, but just this rotor alone is about as complex if not more. With DaVinci, the complexity of the engineering wasn't that impressive, but rather it was the genius of developing the concept itself to begin with, being so unfathomably unique for the time. It was impressive what he did, but IMO, had he not been quite the isolationist and could have collaborated with some people more skilled in materials and engineering at the time, he may well have created something that excelled on all fronts...not just concept.

@chrismofer Год назад

In most RC helicopters the ball joint at the blade fork is on the leading edge, not the trailing edge. this inverts the operation of the collective: in your diagram the swashplate goes down to increase pitch, in most RC helis the swash raises in order to increase pitch. Also, your head rotates counter-clockwise from above wheras the convention is to rotate clockwise. you can solve both problems at once by simply installing mirror image blades.

@malhark748 2 года назад

Thank you so much! I have always wanted to know how the blade pitch control worked on a helicopter.

@SolidworksFunPraveenSingh 2 года назад

welcome! Glad to know that it helped.

@hocinetouer5897 2 года назад

بحثت عنك كثيرا و اخيرا وجدتك عمل رائع اخي استمر و لك من اطيب التحيات .

@nobertkazingizi9878 2 года назад

Yes the complexity is amazing!

@jacobfriday4482 2 года назад

I want to start this in my school, as a project.

@SimonAmazingClarke 2 года назад

Really excellent work, you even got the 90 degrees out of phase for blade lag. One minor comment. Your blafe pitch was the wrong way around, collective up, all blades pitch up, yours go down. Easy enough fix. Blades are generally symmetrical on helicopters, except for the Chinook.

@jimthomson1892 2 года назад

His model has trailing edge pitch horns. With this configuration, collective control up would have to cause the slashplate to move down, pitching the blades leading edge up. This would be reversed for leading edge pitch horns. It would have been better to refer to swashplate movement- up and down for collective pitch and tilting for cyclic pitch-as there is no connection between the cockpit controls and the rotor head in this model.

@edadriano9426 2 года назад

I agree. Blade grip linkages should have to be installed forward the blade grips. His configuration inverses the Pitch up with collectives sticks all the way down.

@user-hx1di5tk8r 4 месяца назад

Oh how lovely come on Fabricates res Fantastic!

@403.FORBIDDEN Год назад

Great video and animations as always but I wish it portrayed the helicopters motion relative to the swashplates position better.

@TS-mq1fj 2 года назад

WOW!, Excellent explanatory animation. Thank You!

@SolidworksFunPraveenSingh 2 года назад

glad you liked it, thanks!!

@loflight75 3 года назад

lower servo arm => increased pitch in animation

@clementidemudo6006 2 года назад

make sense. this is a good work. bravo!

@SolidworksFunPraveenSingh 2 года назад

thanks a lot!

@diegoteclas 3 года назад

i KNEW IT ALREADY, BUT VERY NICE DONE 3D ANIMATION!

@SolidworksFunPraveenSingh 3 года назад

thanks!!

@omsingharjit 3 года назад

Great work .

@SolidworksFunPraveenSingh 3 года назад

Many thanks

@user7amoud34 2 года назад

Wonderful video Thanks a lot

@mxcollin95 Год назад

Very cool! 🤙

@corderodembry1723 3 года назад

Cant wait!!!!!

@SolidworksFunPraveenSingh 3 года назад

Thanks!! Full Tutorials will be available just in a week.

@20spray1 Год назад

thank you for this video!

@SolidworksFunPraveenSingh Год назад

welcome!

@lakkingbakler3716 2 года назад

Great works that's good but please which software did you use to make animation after motion study with many sequences

@wernerschulte6245 2 года назад

Very well done ! However, I never saw rotor blade holder with a screwed lever. My helicopters do have this in one piece. Is it an engineering idea of you or did you reverse engineering at an existing model ?

@TV-yq5be Год назад

I'm a senior researcher at Heimkeeper Co., Ltd.Our company has an idea to reduce propeller noise and vibration of helicopters and drones.We're done with the experiment.We have applied for a utility model and a patent As a result of several experiments with small propellers, the current noise and vibration reduction effect is about 30%. Looking forward good news from you soon

@justaninja1 3 года назад

Pretty cool 👍

@SolidworksFunPraveenSingh 3 года назад

Thanks!

@benimadhabsarangi2334 3 года назад

You are genious solid work Praveen

@SolidworksFunPraveenSingh 3 года назад

thank you so much!!

@alexndreazevedo 3 года назад

Excellent video: self-explanatory. The song is also great

@SolidworksFunPraveenSingh 3 года назад

thank you very much!!

@purytutorial7809 2 года назад

Oww .. sungguh canggih bos.. Aku suka.!

@donalfinn4205 2 года назад

Well done!👍☘️

@SolidworksFunPraveenSingh 2 года назад

Thank you!!

@user-wn1cm3mb6d Год назад

Автомат перекоса - гениальная штука!

@SnitchyCat 3 месяца назад

Sweet!

@SolidworksFunPraveenSingh 3 месяца назад

Glad you liked it!

@dgb5820 2 года назад

Fantastic job very effective

@SolidworksFunPraveenSingh 2 года назад

Thanks!!

@ernieg3drc120 2 года назад

Thank you !

@SolidworksFunPraveenSingh 2 года назад

Welcome!

@trincobroadcastingcommitte7528 2 года назад

Thanks for your valuable information I'm from srilanka

@mohdshafiuddinbidri845 2 года назад

Superb video with explanation.

@SolidworksFunPraveenSingh 2 года назад

Thanks a lot!!

@jayantakumardebnathspring2698 2 года назад

It's a really excellent video.

@SolidworksFunPraveenSingh 2 года назад

Many many thanks

@321GhostRider123 2 года назад

Finaly i saw a video that explain's how it work's. I was asking my self the last year's and was thinking how it could work but was to lazzy to google it. Look's like it was pretty similar how i thougt it would work. Thx oh whise YT alorithm for recommending me that xD

@SolidworksFunPraveenSingh 2 года назад

Glad to hear that! Thank you so much!

@pepopa7014 3 года назад

Good job!!

@SolidworksFunPraveenSingh 3 года назад

Thanks!

@EdgarMorales-vw2wr 2 года назад

Is interesting how described this function, when I was a child forever ask me, what did the blade do to move? Interesting

@buditarigangersang3692 Год назад

Wou keren sir teknologi

@kartoffelsack362 3 года назад

Very nice animation. You did your job very well

@SolidworksFunPraveenSingh 3 года назад

Thank you very much!

@ezaken1099 Год назад

Cara

@mdbryan9525 2 года назад

Now do one showing how a coaxial rotor system works especially in regards to how the anti torque pedals work. Thanks

@mdbryan9525 2 года назад

@@kenrobba5831 Right. I knew that. What do you call the foot pedals now? Foot pedals?

@marianaemily7128 2 года назад

I like it so much, it's really a great work. I would like to have this project. Could you share it with me with more details?

@crazy_istanbul_cat 5 месяцев назад

I could not understand how it go backwards and front but i think i understand it now :)

@rongarza9488 2 года назад

Excellent video. The multi-rotor (quadcopter) Drone technology has really simplified this now, but this was the technology for its day. Of course, this needed a tail prop to compensate for the drag and help in steering.

@geoffbuttsworth 2 года назад

The most modern helicopter around (the Mars helicopter, Ingenuity) uses this type of control system. So it's not dead yet!

@jkleylein 2 года назад

The tail rotor is mainly used to compensate for torque produced by the main shaft trying to spin the helicopter body in the opposite direction of the rotors. This is why a heli with a damaged tail rotor spins out of control.

@stopthephilosophicalzombie9017 Год назад

@@jkleylein I don't understand why there isn't some kind of emergency gyro or something for failure of the tailrotor.

@chrismofer Год назад

@@stopthephilosophicalzombie9017 how do you envision this gyro working?

@stopthephilosophicalzombie9017 Год назад

@@chrismofer I don't know, that's for the engineers to figure out.

@philam1973 2 года назад

I used ti work with a company that did a lot if work with helicopters. I used to provide support in 2 different helicopter factories. Learned a lot how they flew. Your pitch lower section works fine but I fail to see the upper blade movement following the same inclined plane. Am I correct?

@viswanathanramakrishnan7613 2 года назад

It's an eye opener for me to know the rotor blades of a helicopter is being controlled. Is it possible to to 3D print these parts of required dimensions to incorporate the same in a model. Is the STL files of the parts provided in the video since I am watching this in my android mobile.

@JB73691 11 месяцев назад

This makes my RC heli roll pitch and yaw.

@armaganalkan1661 Год назад

there should be 2 rotating scissors for dynamic stability(vibration)

@manuelsilva8528 2 года назад

Any idea about rigid rotor design?

@rahulchoure8035 3 года назад

good job

@SolidworksFunPraveenSingh 3 года назад

Thanks

@arafat877 3 года назад

Could you share with me the schematic of this system please ???

@bohan9957 3 года назад

2:16 Swashplate moving up should give you positive pitch, not negative pitch.

@TheBigFatHairyCheese 3 года назад

Often yes, but not for this design. This rotor head is using a negative advance angle, so the swashplate must be LOWERED to increase the pitch angle. Long explanation: - Negative advance angle: the pitch horn attaches to the trailing edge (rear) of the blade: LOWERING the swashplate pulls the back of the blade down, raising collective pitch. - Positive advance angle: the pitch horn attaches to the leading edge (front) of the blade: raising the swashplate lifts the front of the blade up, increasing collective pitch. Some real helicopters (e.g. the B105) use a negative advance angle, while others (e.g. the R44) use a positive advance angle.

@alanwhitfield1907 2 года назад

The vast majority of helicopters have the pitch change links connected to the leading edge of the blades so that raising the swashplate causes increase in blade angle of attack. The only types that I know with the pitch change links connected to the trailing edge are the Bolkow 105 and the Hughes 269. The rotor head from the 269 was also used on the McUlloch J2 autygyro, and possibly on a few other autogyro designs.

@tuanho9520 2 года назад

I need a detailed drawing. Please thank you so much

@sagarpawar4068 3 года назад

Can you plz give use the dimension files of the assembly and all part

@govindasemasinghe7744 Год назад

Grate work !! Can I have these cad files if don’t mind?

@viral2031 2 года назад

Plz I need software or emulator to test the motor of the helicopter

@markjacobsen605 2 года назад

Turned sound off when music started... Great video. Except for the music.

@sugengtvofficial3376 2 года назад

nice....greetings from Indonesia ( Sugeng TV official ) good luck!

@SolidworksFunPraveenSingh 2 года назад

thanks a lot!

@sugengtvofficial3376 2 года назад

@@SolidworksFunPraveenSingh Terimakasih, minta video pembuatan Blades

@barbaryasbarbar4986 3 года назад

good expression

@SolidworksFunPraveenSingh 3 года назад

thanks

@sagarpawar4068 2 года назад

Can you give use the files of part design and assembly dimension files

@jayakrishnans2785 3 года назад

Thanku

@SolidworksFunPraveenSingh 3 года назад

welcome

@vikirabat5091 3 года назад

Can i use it to make my own helicopter

@kasifyldrm1981 Год назад

Merhaba kolay 3 adet servoyu aynı anda hareket ettirip sonra ayrı ayrı birbirinden bağımsız hareket ettiren bir sistem varmi teşekkür ediyorum

@kashyappandya7047 2 года назад

Please make same for coaxial rotors helicopter ( kamov 226t )

@weiaungweiaung Год назад

yes👍👍👍

@indrajitmajumdar8590 3 года назад

Recommended CPU configuration for smooth running of solidworks please.

@SolidworksFunPraveenSingh 3 года назад

Basic requirement: i5 (or higher) 500 GB Hard disk or SSD (for high speed SSD is preferred), RAM 8 GB (16 GB- if dealing with analysis & large number of parts), Graphics Card 4GB ( NVIDIA Quadro K2200 or any SW Recommended)

@indrajitmajumdar8590 3 года назад

@@SolidworksFunPraveenSingh Thank you very much. So its a costly system.

@SolidworksFunPraveenSingh 3 года назад

yes it's costly But! if u don't need to use SW for any heavy projects ( including more than 100 parts & lots of analysis involved ) then this configuration is still enough: i 3 or i 5, 500 GB Hard disk, 4-8 GB RAM, 2GB Intel Graphics Card

@indrajitmajumdar8590 3 года назад

@@SolidworksFunPraveenSingh thanks mate, I really really appreciate that. And what kind of gpu? Quadro I guess. Will the same config work on maya, inventor, 3dsmax etc too?

@SolidworksFunPraveenSingh 3 года назад

GPU ( it's useful when u have to work on very complex project & render any simple or complex animation) , otherwise CPU is sufficient. For Maya, 3dsMax You will need GPU to quickly bake & render high quality animation.

@budipirang2694 2 года назад

Wow l like it

@SolidworksFunPraveenSingh 2 года назад

Thank you so much !

@mostafasaadinasab7284 3 года назад

#awesome

@SolidworksFunPraveenSingh 3 года назад

thank you so much

@adverspace 3 года назад

Hmm now I can think clearly

@weiaungweiaung Год назад

yes👍👍👍👍

@amamulkhan7551 2 года назад

Oki

@GenKirby 2 года назад

I'm confused; I'm seeing the blades pitch down when the collective is raised on a counterclockwise rotating system. . .? I understand this is supposed to be an RC helicopter, but either I'm crazy or the blades are not pitching correctly.

@labhanshkr8424 3 года назад

Aaj pehli baar samaj main aaya ki helicopter 🚁 kyse udta h.. 👍

@SolidworksFunPraveenSingh 3 года назад

thank you bhai 😊🙏

@doymotorspeed 3 года назад

Gambarya kurang jelas mas broo, tutoril nya good,👍👍

@SolidworksFunPraveenSingh 3 года назад

full tutorial links are there in the description box of the video

@mnetronics6431 2 года назад

yes helicopter lore

@variousvideos554 2 года назад

I see your are perfect engineer and also you are alone understand the soildworks is perfect! as engineering not cad skills

@princess5252 9 месяцев назад

Saya ingin belajar membuat helly copter sederhana gimana sih dari awal nya

@hossamabdelrahman7343 3 года назад

What is the RPM of a helicopter rotor? How fast do helicopter blades spin?

@SolidworksFunPraveenSingh 3 года назад

in this animation, 10 RPM was taken.

@alanwhitfield1907 2 года назад

The majority of helicopters have a rotor speed around 200rpm. The Westland Gazelle has 380rpm and the Westland Scout and Wasp have rotor speed of 400, with a potential 410 maximum. I believe that this is the highest rpm of any helicopter design. Most helicopters have some means for the pilot to adjust rotor RPM within a few percent of the nominal.

@note.inspace 2 года назад

how to create animation like this ?? too good

@SolidworksFunPraveenSingh 2 года назад

Created in Solidworks software. This animation is a combination of works created using Solidworks Animation & Motion Analysis. Thank you so much!

@note.inspace 2 года назад

@@SolidworksFunPraveenSingh please make a tutorial on how to create solidworks animation like how in the starting all the components were joining together.

@pp_septipurfitasari3966 2 года назад

What about 3 blade?

@rasavelupillai3615 Год назад

Hi super

@vigisbigtm 2 года назад

Is there a place where I can download the parts, I want to do this mechanism in Catia.

@SolidworksFunPraveenSingh 2 года назад

Currently not, but a series of full tutorials of design, assembly and motion study are there on the channel.

@damodargarh2238 2 года назад

Sir ap kha se hai

@ammarahsan4726 2 года назад

hay can you share this SW model with us

@jesuschris3181 2 года назад

I need to buy

@sampathhappawana2334 Год назад

If possible to show the parts separately easy to make them to us.

@AkidilCocugu 2 года назад

Can I have this design so that we can really manufacter it? I will appreciate and will certainly pay for it.

@jimthomson1892 2 года назад

Great video. The part you label “Rotor Holder” is actually called a “Blade Grip.”

@SolidworksFunPraveenSingh 2 года назад

thanks a lot!

@anilrathod5976 3 года назад

bro can you make animation on rotary index table

@SolidworksFunPraveenSingh 3 года назад

yes, will do.

@anilrathod5976 3 года назад

@@SolidworksFunPraveenSingh thanks i wll b waiting for video

@doymotorspeed 2 года назад

Tutorial bering lotor helyy copter broo..

@jbpark8719 2 года назад

But RC heli rotor rotate direction is 'clockwise'. look at the 2.17's rotor direction. it's opposite. and 2.31 too.

@YASIRABBAS681 3 года назад

hi nice work how i can communicate with you

@jakerabinz9411 Год назад

Lot's of people here wanting to make their own helicopter from a simple animation that shows 3 axis push/pull interactions. But in the real world there is something called friction, and another thing called resonance, and inertia, and gyroscopic force, and mechanical moments. And about 20 other factors that need to precisely balance to overcome gravity without dropping yourself 4 meters and crushing your spine, or having your body sliced into primal cuts of meat by a whirling blade that goes out of track due to a miscalibration, or one of multiple fasteners flying apart because just one of those failed. Come to think of it. Building your own helicopter, could help solve global overpopulation.

@doymotorspeed 2 года назад

Bering lotor hlyy copter what is the name, broo??!!...

@lokisvlog4326 3 года назад

Im thinking to make my own helicopter can u help me please

@snipernekad 3 года назад

Ijin nyimak❤❤❤❤❤👍👍👍👍

@SolidworksFunPraveenSingh 3 года назад

thank you so much 🙏🙏

@armandoperalta4373 2 года назад

Motor de elicoptero barato casero personal

@segerpramono617 Год назад

Good afternoon healthy al ways greetings everyone thankyou🙏

@milordas 3 года назад

missing tail rotor for full imagination

@D-B-Cooper 3 года назад

My brother use to do testing on helicopter parts, he showed me a bolt, about 3/8”, that held the blades on. Here we have two, very good expensive bolts, but makes you worry about counterfeit parts.