How does an RC Helicopter work? | RC Helicopter Animation | Swashplate Mechanism Animation.

Подписаться 43 тыс.

Просмотров 161 тыс.

50% 1

In this video, with the help of animation, we'll look at how radio controlled helicopter works. Here we'll look at all the parts like the receiver, transmitter, brushless motor, servo motors etc. We'll also look at the helicopter controls like the collective pitch, cyclic pitch and yaw in detail.
Music Used :-
Eyes of Glory - By Akash Gandhi
/ aakash gandhi - topic
Track:- Chase
Artist: Alexander Nakarada
www.serpentsoundstudios.com/
creativecommons.org/licenses/b...
Silhouette of War - Dramatic Epic Music - By Keys of Moon Music
/ keysofmoonmusic
Intense Action Background Music | Cinematic Music by Argsound
Music from @Argsound Background Music
Name of track: "Dangerous Roads"
Link: • (No Copyright) Intense...
"Legionnaire" - By Scott Buckley
• Scott Buckley - 'Legio...
'Legionnaire' (2022 Remaster) - By Scott Buckley
• 'Legionnaire' (2022 Re...
'Titan' - By Scott Buckley
• Scott Buckley - 'Titan...
Scott Buckley - / scottbuckley
Helicopter model by :- Taesan Kim
/ @taesankim6581
Transmitter model by :- Kirill Indukov
grabcad.com/kirill.indukov-1
Timestamps [Chapters]:-
0:00 Intro
0:57 RC Helicopter
1:39 All Parts required
3:33 RC Transmitter
4:42 RC Receiver
5:20 Lithium Polymer [LiPo] Battery
5:47 Electronic Speed Controller [ESC]
6:06 Servo Motor
6:46 Brushless Motor
7:03 Helicopter Controls
8:10 Collective Pitch and Throttle
9:22 Collective Pitch Up
11:02 Collective Pitch Down
12:28 Cyclic Control FWD/BWD
12:51 Cyclic Forward
14:43 Cyclic Backward
16:30 Cyclic Right
17:41 Cyclic Left
18:53 Yawing
19:33 Left Yaw
20:07 Right Yaw
20:56 Balance Bar and Rotor Blades
Tags:-
#rchelicopter #helicopter #animation #rc #3danimation #explained

Развлечения

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@sygdesignworks Год назад

While making this video I accidentally deleted all the original animation files and video files not once but TWO TIMES!! Set me back by three months! I almost gave up when it got deleted the second time, but I decided to complete the video at any cost. I knew it would be worth it in the end. Hence the late upload. Sorry about that. I choose quality over quantity. My next video will be mind-blowing, I promise!

@dimitris2521 Год назад

Outstanding work! I would suggest you use software like TimeMachine(Mac), BackInTime(Linux) or any equivalent if you are using Windows. It is literally a lifesaver. It helps not only if you accidentally delete your files, but also if anything gets corrupted or in case you make an irreversible change to your work you would like to revert.

@sygdesignworks Год назад

@@dimitris2521 @dimitris2521 Thanks a lot! I now save my files in different devices as backup. Thanks for the suggestion.

@dimitris2521 Год назад

@@sygdesignworks And that's the right thing to do! The kind of software I'm suggesting you, though, is not a replacement for your backup scheme. It's used on your main disk (which contains the files you are currently working on) and enables you to revert from changes you have made to a specific time. For example, if you are currently working on an animation and you make a change you don't like, you can make your files as they were right before you made that change 2 hours or 2 days before, for example. This is also handy if you accidentally delete a file. You can immediately find it in your "data history". No need to revert to the last time you manually made a backup (which would be probably outdated). Trust me. You should definitely give it a try. Keep up the good work! Cheers

@sygdesignworks Год назад

@@dimitris2521 Thanks a lot!

@ronaldgreen5292 8 месяцев назад

That's more than 👍 ok! You are human!! I loved the technical details in your video!👍 loved it, thanks!

@sjurick 9 дней назад

As a fan of both RC and CG, this was truly spectacular! However, next one, please nix the Ninja Star tail rotors for some realistic ones :)

@sygdesignworks 9 дней назад

Thanks for watching!

@Foxbat-25 8 месяцев назад

Thank you for this amazing video Sir❤️. Very nicely explained and animated👍. Love from India🇮🇳❤️

@sygdesignworks 8 месяцев назад

Thanks a lot! Thank you for watching!

@mr_nice. Год назад

In order to tilt the rotor disk forward, the swash plate is tilted to the left. Not forward. Gyroscopic phenomenon. And so on for the other tilts. Backwards = swashplate tilt to the right Left = swashplate tilt backwards Right = swasthplate tilt forward (if the rotor is turning clockwise, in top down view. The oposite is true if the rotor is turning counter clockwise) 👍👍👍👍

@jasonnhu3338 Год назад

That only works when you phasing the rotor 90 deg from the swashplate

@mr_nice. Год назад

@@jasonnhu3338 ...I'm not sure brother. I'm about 73.28% sure that is how things work in the real world, and another 5-6% that it's the same in the RC world, but I can't realy tell for sure. I'm not a mechanic. I just saw a couple of videos. Would be nice to find a video that explains it. 👍👍👍

@jasonnhu3338 Год назад

@@mr_nice. whenever you see the linkage go straight up from swashplate to the main blade grip without phasing, then it will work just like in the video. Other case, if the linkage is 90 deg not directly from the swashplate, i.e., the linkage came up from the swashplate and then links to a mixing arm, then from the other end of the mixing arm links to the main grip 90 deg from the first start of the 'joint'.

@mr_nice. Год назад

@@jasonnhu3338 ......you lost me after the mixing arm 😂😂😂

@jordancoleman2402 9 месяцев назад

All depends on what kind of servo setup you are using, yes in some applications you are correct but not in all "90 degrees one servo" or "CCPM 120 degrees" so you are half right. 👍

@Tronic_ 8 месяцев назад

The front two servos need to be rotated 180 to allow the linkages to be perpendicular to the main shaft

@swarnamohanchandrakanth5243 Год назад

Thank you soo much brother. I understood 100% about helicopters.

@sygdesignworks Год назад

Thanks a lot!

@Thor_with_Ball_Hammer Год назад

No words to describe this beautiful video.

@sygdesignworks Год назад

Thanks a lot!

@StevenHokins Год назад

Good job! Thank you for video

@sygdesignworks Год назад

Thanks a lot!

@georgedennis8938 2 месяца назад

I like it ,it looks very beautiful, and I went to learn how to fix it

@ericsorg6335 4 месяца назад

Very informative. It explained a lot. I’ll probably watch it several times

@sygdesignworks 4 месяца назад

Thanks for watching!

@sanjaymankotia1916 Год назад

Fantastic Animation video so beautifully explained ....a complex flying machine such as a helicopter. One feature of precession may have been deliberately missed out. Maybe it is difficult to understand by a hobbyist. Hope to see many such videos in times to come. All the best in your remarkable venture.

@sygdesignworks Год назад

Thank you very much! Thanks for watching.

@Geosbudy 9 месяцев назад

Very detailed if you're thinking of building one especially 3d printing parts

@sygdesignworks 9 месяцев назад

Thanks for watching!

@mechondamotos 8 месяцев назад

FANTASTIC GOD BLESS YOU

@sygdesignworks 8 месяцев назад

Thanks a lot! Thank you for watching.

@metanci 8 месяцев назад

Great animation. Things become to be clear ..... Thank you so mcuh for this great job.

@sygdesignworks 8 месяцев назад

Thanks a lot! Thanks for watching!

@DynamoClips 9 месяцев назад

thank you this was very easy to understand

@sygdesignworks 9 месяцев назад

Thanks for watching!

@michaelmrvosh 8 месяцев назад

If you want to yaw the helicopter left and the main rotor blade is rotating clockwise then you would turn the lift off on the tail rotor. The torque is what yaws the helicopter to the left. If you want to yaw right then you add lift to the tail rotor to pull the tail to the left. You said that lift was applied in both directions to the tail rotor to control left and right yaw. I always thought the torque would yaw you in one direction and the tail rotor lift would yaw you in the other direction.

@fridaycaliforniaa236 6 месяцев назад

You actually have to offset the swashplate actuators by 90° (gyroscopic precession) or it will never fly as intended. Also there are other differences with how a true chopper works, but I guess for those ones it's because it's a RC helicopter.

@sygdesignworks 6 месяцев назад

Correct. But that works when the control rods are going straight to the rotor blades. Here the the mixing lever is doing that 90 degree phasing. Thanks for watching.

@ONI-CHA Год назад

Bro thats was lit reallly enjoyed it Just feels like professional documentary and the bg music though💙

@sygdesignworks Год назад

Thanks a lot!

@ONI-CHA Год назад

@@sygdesignworks can you mention back ground music name

@sygdesignworks Год назад

@@ONI-CHA I've mentioned all of them in the description.

@reginaldmcnab3265 6 месяцев назад

That’s my align trex 450se v2! 😅 The first collective pitch RC helicopter I flue! I still have it! Still flybar, 3s but I’ve got 6s motor to upgrade it and then I will covert it to flybarless finally! 😅 Great job with the animation!

@sygdesignworks 6 месяцев назад

Thanks for watching!

@pauloleitao2956 9 месяцев назад

Parabéns pelo trabalho☆

@sygdesignworks 9 месяцев назад

Thanks a lot!

@michaelschwartz9485 5 месяцев назад

I love flying rc planes and helis, very nice video!

@sygdesignworks 5 месяцев назад

Thanks for watching!

@user-oh6go8lp4m 8 месяцев назад

Nice

@sygdesignworks 8 месяцев назад

Thanks for watching!

@jordancoleman2402 9 месяцев назад

The model being used in this video is a old skool "flybar" head, would really like to see one made on how a flybarless head works in hand with a gyro. 👍

@sygdesignworks 9 месяцев назад

Great idea! I wanted to make a video on flybarless one too. Thanks for watching!

@jeb123 Месяц назад

You forgot the guroscopic precession, blades tils 90 degrees earlier in every position.

@sygdesignworks Месяц назад

Not in this model. Observe The mixer arm arrangement. It will counter the gyroscopic precession.

@teachmehow39 Год назад

Amazing 😍😍😍😍😍 video

@sygdesignworks Год назад

Thanks a lot!

@sabriahmed8203 8 месяцев назад

Great Job... i want radio control 6 channel Schmetic diagram please.

@sygdesignworks 8 месяцев назад

I downloaded it from some website. I uploaded this video almost an year ago, so I don't remember the name of the website. Thanks for watching.

@actionman67 8 месяцев назад

Amazing Video!!! Wish I knew all this earlier. I have a top of the line RC helicopter that I still haven’t flown. Any videos on the buttons on the remote? Thank you!!

@sygdesignworks 8 месяцев назад

I'll make another video on Quadrotors, I'll explain the transmitter in that video. Thanks for watching!

@actionman67 8 месяцев назад

@@sygdesignworks thanks a million Times!!! Your vidéo is at another level and never seen such clear explanations.

@sygdesignworks 8 месяцев назад

@@actionman67 Thanks a lot! You might like my F-35 video :)

@FweDs Год назад

Great work keep it up!

@sygdesignworks Год назад

Thanks a lot! Thanks for watching!

@thuytranquang5721 8 месяцев назад

kỳ diệu

@sygdesignworks 8 месяцев назад

Thanks a lot!

@dirkske 9 месяцев назад

I watched thia specifically for the workings of a flybar. No such luck 😢 Stunning graphics though

@sygdesignworks 9 месяцев назад

Thanks for watching!

@Vova67ify Год назад

Would it be possible to do a similar simulation about a Coaxial Helicopter, please?

@sygdesignworks Год назад

Sure! I'll make one on Coax heli. Thanks for watching!

@rossnolan2883 Год назад

😊😊😊

@sygdesignworks Год назад

Thanks for watching!

@ghiassie 8 месяцев назад

in you explanation you ignored gyroscopic force completely. everythings act 90 dagree after you applied the force. to pitch forward you need move down swashplate in the right.

@sygdesignworks 8 месяцев назад

The gyroscopic precession doesn't work on this model, because of the way the control rods are connected to the blades. There is no 90 degree phasing when the rods go from the mixing lever, therefore the gyroscopic precession is absent. Thanks for watching.

@janhruska4471 6 месяцев назад

YOU HAVE AN ERROR there, tilting swash plate forward NEVER tilt rotor disc fowrard. THERE IS ALWAYS 90° DELAY. At least at real helicopters. Look at UH-60 swash plate control and at what angle the pitch horns are mounted on blades.

@sygdesignworks 6 месяцев назад

In this model, the placement of the mixing lever against Swashplate with the control rod will cancel the phase-shift. In UH-60, the control rods goes straight from the swashplate to the rotor blades directly. Here the control rods go from swashplate to mixing lever and then to the blades.

@kasifyldrm1981 Год назад

Merhaba kolay gelsin 3 adet servo motoru ayni anda hareket ettirmek için ve sonra ayrı ayrı hareket etmesini için nasıl bir sistem kullanılıyor

@sygdesignworks Год назад

There's a potentiometer in servos that controls the angle of the servos. The servos move depending on the input received from the wireless transmitter.

@kasifyldrm1981 Год назад

@@sygdesignworks onu biliyorum izlediğim başka videolarda da kumandadan verilen komutla 3 servo motor aynı anda ve kumandanın başka dugmesiyle verilen komutla ayrı ayrı hareket ediyor bunun bir sistemi varmı

@sygdesignworks Год назад

@@kasifyldrm1981 Yes. They are called "mixing". In the transmitter, there is an option to mix controls. The mixing will make your servos move simultaneously as well as individually depending upon what you are controlling. You can even make them move opposite to each other.You can find plenty of videos about transmitter channel mixing.

@mr.technicalverma7506 9 месяцев назад

You didn't use the concept of gyroscopic precession.

@sygdesignworks 9 месяцев назад

In this model, due to the specific arrangement of the control rods and the mixing lever, there will be no phase shift. Therefore no gyroscopic precession.

@Hidenberg8278 7 месяцев назад

How can I afford it

@sygdesignworks 7 месяцев назад

No Idea. Thanks for watching!

@Mominur855 5 месяцев назад

🇧🇩🇧🇩🇧🇩🇧🇩🇧🇩❤❤❤❤❤

@sygdesignworks 5 месяцев назад

Thanks for watching!

@Nerry-Xience-Aero-Robotique 10 месяцев назад

COMMENT ON FAIR SAI IMAGES LA CEST LE 3DMAYA

@sygdesignworks 10 месяцев назад

Sorry I don't use Maya. Thanks for watching!

@devilnative7279 4 дня назад

Hills of steel😂

@yuktongwong3774 9 месяцев назад

The explanation of rolling is totally wrong. The action of a helicopter involves the gyro effect that make the any action output delay 1/4 cycle. For example, if you need the helicopter rolls forward, actually you are giving positive pitch on right side (when the blade is rotating clockwise)

@sygdesignworks 9 месяцев назад

Not wrong at all bro. Take a look at how linkage goes straight to the blade grip from the swashplate. The gyroscopic precession occurs only when there is a phase shift of 90 degrees.

@JMMC1005 7 месяцев назад

@@sygdesignworksThe gyroscopic precession always exists (it's physics) but your model automatically applies a 90 deg phase shift between swashplate and blades. Your animation is correct (swash forward will pitch forward), but the explanation is wrong. Pitching the swashplate forward increases / decreases pitch at 90 degrees in your model, resulting in lift asymmetry on the roll axis. Due to precession this results in pitching of the heli.