Hi-End Floor Standing Speaker Production Process / 落地揚聲器製作過程 (音響製造) - Taiwan Speaker Factory 

Primarily handmade, even the speaker driver. Thumbs up to this Taiwanese manufacturer.

Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs

I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!

Почти как и я в гараже делаю. Только мегафрезера нет!😁

12:48 A very Hi-End approach. :D

タイムスタンプ 0:00 オープニング 0:11 スタート 0:17 エンクロージャー用合板接着工程 0:45 エンクロージャー用合板プレス成形工程 1:12 MC によるエンクロージャー用合板切削工程 2:56 切削加工後のバリ取り工程 3:22 エンクロージャー内装組み付け工程 4:49 エンクロージャー傷取り工程 5:49 バッフル傷取り工程 6:13 バッフル研磨工程 7:02 エンクロージャー外装組み付け工程 8:56 中空コイル製造工程 9:32 ネットワーク組み立て工程 10:45 スピーカーユニット磁気回路組み立て工程 11:10 スピーカーユニットフレーム組み付け工程 11:32 スピーカーユニット振動系組み付け工程 12:31 スピーカー組み付け工程 14:00 スピーカーストローク検査 14:13 バッフル組み付け検査 14:23 測定検査 14:33 完成 所々自信が無い所があるので誤りがあったら申し訳ない😢

The most satisfying tool for me is the air powered caulking (gluing) gun. My right hand asked me "Can we get one?".

キャビネットの木材は湿度があってもソコソコ良い物が仕上がると思うけど、スピーカー自体はどうでしょうかね？ 紙では無く薄膜アルミ素材とか使っているのかな？

Awesome video! In Thailand has Usher importer shop at Fortune 3rd floor. They have many models of USHER spk .

12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))

As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community • It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸

Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..

I own a pair of Usher Mini-Two's that I bought in 2012, the construction is immaculate even for this entry-level model. It still uses pretty much the same curved birch-ply construction and internal bracing done with MDF, except mine is satin finished instead of the polished look of the higher end models. I still listen to them up to this day, the price/performance of these speakers are so good, I think I need to spend at least $6,000 to get something that's noticeably better!

ฝีมือคนใต้หวันเยี่ยมมาก ตั้งใจทำมาก

還有很多小細節可以再 精進！老外就是厲害在越不注意的地方，越是有 畫龍點睛 的音效，以HI END的角度分析。如果以20萬級距內，他是可以跨獎。揚聲器的調音是哲學問題，當你深入了解，其實就是 陰陽太極的對應！個人研究喇叭，超過15000hr才摸出其中的精華處，可惜 音響行業，還是民族性產業，還是很敬佩 創辦人 阿水大師！

Luar biasa .bisa langsung melihat prosesnya.terima kasih

I was honestly surprised at how manual a lot of these processes still are!

Thats technic about 20 years ago by Hans Deutsch, Harman Cardon, JBL, Akai, Sony, Canton asmm.! Hand-Made but very good!!! Taiwan is ecxiting good! Today you'll get the best sound out of small boxes! 😢👋👋👍🏼

四十年前上高中的我組裝音嚮前後級功放搭配的揚聲器就雅瑟音響🔊。突然想起青澀的少年時代…

This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.

Excelente trabajo esa es la razón de tener unos altavoces para salón profesionales tengo un Dali Senzor 7 y son muy parecidos y muy buenos

Trabalho fantástico. Saudações do Brazil.

Завораживает!

Amazing... the best qualitys Made of Taiwan...so beautiful.. enjoy your music with Usher...❤❤...15:12.

saya suka prosesnya.dari indonesia.

ML802一直是我的Hi-END，聽2-3小時都不膩

모든 유닛을 자체제작하는지 모르겠지만 요새같이 분업화된 오디오계에서... 중국 말고도 동양에도 자사 유닛을 만들어서 생산하려는 완성품업체가 있네요. 앞으로도 좋은 제품 많이 만드시고 세계적 명성도 얻으시길.....

Очень приятно смотреть на процесс сборки 🙂👍

Proses produksi speaker berdiri lantai kelas atas Mantap

This video is so satisfying to watch. Thank you for posting! And I have owned Usher speakers in the past and they are quite warm and special.

This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.

I love this! The way they do epoxy at 11:02 is genius!

I enjoyed this video. The only thing I wonder about is one thing. When you hammer down the bottom and top cabinet pieces into the cast frame? You didn’t press the veneer against the perfectly cut plates. There appears to be gaps that the epoxy or glue filled. I guess because you are looking for perfect linear appearance from top to the bottom. The veneer is cast.

Choáng khi thấy quy trình sản xuất loa đứng cao cấp,loa này mà nghe nhạc thì đẳng cấp

The cabinet forming process is amazing , is that heated connections in the mold?

Parabéns! Serviço altamente qualificado e de qualidade! Salvador, Ba, Brasil.

The ply forming of the cabinet looks a bit rough...lots of air gaps in the laminates?

Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..

過去我是從事音磁規，音圈，音模全世界最大的被動元件生產商，難得有機會能整體看完音箱生產。

Наколенное производство... Особенно порадовала работа электродрелью, как дядя Миша в гараже... )))

Parabéns pelo belo trabalho .

It's 2X speed time! None the less, nice vid The amount of work done by hand is impressive.

I love the zero guard cnc. It's as if tools never suddenly explode or machines don't randomly crash, cause tools to explode. OSHA would love this place.

I enjoyed watching this video .Some good production techniques. I used to work for Duntech Audio back in the 80s and wathing this brought back a lot of good memories.

Showing the process awesome

Amazing process, highly precise and durable

Vraiment Excellent Merci

What an amazing experience watching these quality built speakers with such care and a love for craftsmanship! This is high-end indeed. I wonder if this is Taiwan 🇹🇼 Thanks and good luck for continued success.

Шикарно!

Красивое👍

分频器看起来可以，音箱里面用什么吸音材料？

Респект и уважение вам за ваш труд

I’ll stay with my 1974 Altec Lansing 150 # a pc speakers 15” woofers, horn mid range, horn high freq. all Alinco magnet. Range 10hz to 20 kHz 110 db 1 watt at 3 meters. Low volume to 100 watts just sounds beautiful, superb imaging outstanding voice of all instruments, saxophones are dreamy. sware I can hear the horse hair against the strings when I play orchestra, play Metallica. It’s like being surrounded right on stage with them. Very sweet for 50 yr old speakers

Piękne głośniki, gratuluję, chociaż w 12;50 trochę zabolało :)

Since 1972'...WOW One year younger than me 😊 Congratulations, and good job !

looks like they take great care and produce well made product. good work

台灣之光

那些电感線圈什麼的等等绝不可用紅色的會影響低音及音質遍尖最好是咖啡色或更好的是黑褐色的音質低音優

Шедеврально!

The speaker was designed to give the most optimal sound performance in all audible frequencies.

13:17 the screws cannot be tightened without manually baiting for a couple of turns. as a result, the thread will be cut off.

哇，真棒。来自印度的问候。

Brand is from Taiwan ....Usher!!

Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬

Stunning . many thanks

Proses yang sangat bagus🧐

Очень трудоемкий ручной процесс, но результат стоит этого 😊

Una obra de arte esa corneta

不错不错，我们大陆也学习一下😘

que espectáculo los altavoces pero mas la elaboración

Superb!😮

Very well crafted. I wish if the same can be shipped to India. Now, with Bluetooth speakers there are less wires seen in the homes. Great work.

What torque do I apply to screw threads? …Yes

Soldering skill ? What soldering skills?

I've never ( cough) put a screw through a foam surround... Those cabinets are beautiful!

Sungguh luar biasa 👍

Nyimak dari Indonesia ❤

Maravilloso🤘🇨🇱🤗😇

I'm not sure the crossovers are getting some good attention. The boards were bending as they are tightened down. I wouldn't trust that not to develop a problem. So much for high end. Nothing like TAD speakers that are true high end.

they suspiciously look exactly the same as the top of the range Bowers nd Wilkins speakers manufactured in Worthing UK

Спасибо вам огромное.милиардов лайки мало.успехов в торговле. Лично мне понравилось. Если у меня ьыл денги много ,я с удовольствием купил для себя.

用这样的方式生产，产能肯定不会过剩。这我就放心了。

10k that's impressive.

Wowwwww... What a. quality ❤❤❤

Lovely Lovely Lovely Lovely Lovely Lovely

I love to assemble electronics and could solder all day long

看到雅瑟，我也買了一套音響，並想起個人當年的幸福感，如今卻都....，唉！

nice looking speakers.

2:06 saw dust extraction would be nice.

Супер

Я делал клон из полочников Usher S-520😊

А как же безэховая камера? Можно и в цеху замерить АЧХ?

Great video. How much will they cost coming out off these factory? The price in the hifi shop is 14.300 dollar in the U.S.A.

独特なスピーカーコーンしてますねネットカバーも無いしホコリとか溜まったら掃除し辛そう

Премиум производство на скобках? Я чего то не понимаю

@14:10 that test made my sub work

Класс👍! Мне на такие колонки не заработать😢

Impressive! :-)

Sensacional, excelente!

Marvelous excellent craftsmanship 👍