High Performance Boxer SIX CYLINDER build l EG33 l Shortblock Finish l Part 5 l Subi-Performance

Подписаться 279 тыс.

Просмотров 116 тыс.

50% 1

In this Video we finish the short block !
enjoy
#SUBI-PERFORMANCE CLOTHING : www.subi-perfo....
INSTAGRAM: / subiperform. .
FACEBOOK: / subiperforma. .
WEBSITE: www.subi-perfo...
With the videos I give you an insight into my work.
Subi-Performance Engine manufacturer specializing in the construction of Subaru high-performance boxer engines.
Most of the tools I use are from Snap-on and the measuring equipment is from Mitutoyo.
Main Camera: Panasonic Lumix G DMC-GX8H
Action Camera: GoPro Hero 7 Black
INSTAGRAM: / subiperform. .
FACEBOOK: / subiperforma. .
SHOP: www.subi-perfo...
Mit den Videos gebe ich euch einen Einblick in meine Arbeit .
Meine Firma Subi-Performance ist eine Motorenmanufaktur, die auf den Bau von Hochleistungs-Boxermotoren der Marke Subaru spezialisiert ist.
Die meisten Werzeuge, die ich benutze sind von Snap-on und die Messmittel sind von Mitutoyo.
Haupt-Kamera: Panasonic Lumix G DMC-GX8H
Action-Kamera: GoPro 4 Hero Session

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 123

@AndieBlack13 4 года назад

Thank God, an engine shop that isn't dark, dirty, messy and oily...lots of light, bright white workbenches...no shit scattered everywhere...the utter envy of mechanics everywhere. In my 24+ years, I never did have such a shop...Kudos....I guess such a thing does exist!

@trex4586 4 года назад

Looks absolutely perfect couldn't ask for a better engine builder

@harveysmith100 4 года назад

There is something so right about a boxer engine. Having a six cylinder one, with all the balance that brings, makes it even more special

@erwolf6770 4 года назад

One of my Fav channels. I had a SVX with an EG33 that I was going to rebuild and use for a Vanagon swap... This series has me dreaming of what that Engine could have been - Love Subi-Performance and his engine-porn.

@trevorspeedy6333 4 года назад

One can always look at a guys workshop and how clean and tidy he keeps it and take that as a reflection of the quality of his workmanship. This guys is clean and well organised so I bet his workmanship is top notch as can be seen by this build. Well done

@syncrosimon 4 года назад

That engine is beautiful, your attention to detail is befitting of that engine😎😎🇬🇧🇬🇧

@aki4461 4 года назад

ALCYONE SVX-を　所有し運転していました　懐かしい　良いエンジンでした

@neilmchardy9061 4 года назад

That middle circlip is like gynaecology

@dielauwen 4 года назад

Imagine this on a production line.

@skynet3d 4 года назад

I wonder how they get it out...

@meporfo66 4 года назад

Wie schmal die Kurbelwangen sind- Wahnsinn👍 Top Arbeit Andi, wie immer💪 Gruß an Tim😉

@atmm89 4 года назад

love your attention to details, I wish you were in Australia

@ToddLarsen 4 года назад

After watching this I'm motivated to go back to my garage and continue my STI tear down for my outback swap. Thanks for sharing and as always keep building👍

@MrWillydanks 4 года назад

Your attention to detail is excellent, i thoroughly enjoy watching your videos. Keep up the good work 😁

@actontreadway1168 Год назад

this is just what I want to do, except I want a closed deck. brilliant.

@РеалМадрид-к7ж 4 года назад

Ганс красавчик👍👍👍. На одном дыхание посмотрел ролик. Тут и обсуждать нечего- ПРОФЕССИОНАЛ

@SimsonTuningteamOberlausitz 4 года назад

Wird das der für Tim Schricks BRZ?

@rivenmotors7981 4 года назад

Brilliant wrist pin circlip installation tool! But how would you then remove that circlip in the future for cylinders 3&4?

@denzilhitaua7739 4 года назад

Riven Motors Edward scissor hands maybe 😂 long circlip pliers

@marklipsinic7916 4 года назад

How anyone could dislike this video is beyond my comprehension.

@georgef1176 4 года назад

Great build and you do amazing work

@kz400- 4 года назад

Will we see a video engine start?

@SubiPerformance 4 года назад

2weeks

@tionytim3333 4 года назад

@@SubiPerformance I cant wait to hear that first start :)

@kacperdeleska2488 4 года назад

Where is it

@mechared3210 4 года назад

Subi Performance was it posted somewhere coz I can’t find it

@Roman7628 4 года назад

Excelente trabajo y sobre todo muy buena paciencia, saludos desde México, Bendiciones.

@LuxKeiwoker 4 года назад

Monsieur Schrick ist am Start 👍

@ธันยบูรณ์งามขํา 4 года назад

Is a very beautiful work

@Generalusuer 4 года назад

Mr. performance , what is your favorite tool in your shop? Mine would probably be that wrist pin clip tool.

@JlerchTampa 4 года назад

4:36 Someone fabricated or purchased a new fancy single use tool for assembling piston wrist pin snap rings, nice!!

@frankphelps9812 4 года назад

Thank You

@jancarstens3240 4 года назад

Ich hab echt Bock bei dir mal mit anzufassen... Echt genial wie sauber das alles aussieht und wie du mit den Teilen umgehst 😉

@winstonsmith1032 4 года назад

Hey, Andi, I was waiting to see how you got that middle wrist pin clip put in place. I still don't see how you did it. Ist es einfach ein Zaubertrick? EDIT: Aha! I went back to 4:33 and saw the trick: you use a special long-necked wrist pin circlip insertion tool. I was hoping you had a clever miracle tool to perform this task. I was not disappointed. Is this a factory tool or is it custom made? EDIT #2: I'm wondering (along with many other commenters) how you pull that circlip when you break the engine down. Well?

@danielssonsgarage 4 года назад

#2 just pull the block halfs apart?

@richardbowles7690 4 года назад

Speed by Subi

@startrask6769 4 года назад

Warum nimmst du nicht der Pinsel zum verschleierung und machst du das mit Finger? :) wunderschöne Arbeit

@Howdy42 4 года назад

Красота!!

@Jappmannen 4 года назад

That is a very smart tool to install that piston bolt clip for cylinder 3 and 4. But how did you remove it from the beginning when you took the engine apart?

@anthonydipaola1401 4 года назад

I think he just pulls the block half up and off the pistons on disassembly.

@jonasobado8524 2 года назад

What is the green assembly lube you are using?

@paulnolan7509 4 года назад

Would the measured ring gap change if you were to measure it with a torque plate on..?

@christopherblake6695 4 года назад

Could you show assembly of EJ series heads sometime please?

@fezhoult4134 4 года назад

Any reason for not closing the deck on this awesome build, the cylinder walls look very thick so maybe no need? Great video as normal👍

@SimsonTuningteamOberlausitz 4 года назад

The engine won't see boost so it not might be necessary

@fezhoult4134 4 года назад

Simson Tuningteam Oberlausit Oh I see, thank you 👍

@willecutlip 4 года назад

Did you use Subaru cylinder bolts, or did you find another supplier. I'm guessing ARP for the head studs?

@pawelkapica5363 Год назад

So what has become of this engine? What car did it go into and how much power does it make? Would love to see a conclusion of this build.

@harveysmith100 4 года назад

It doesn't matter what the workshop, or what they do in that workshop, there is always a pair of Knipex Cobra's on a workbench.

@ricksehfeld3092 4 года назад

I Hope we'll See it running

@jangehlhaar7215 4 года назад

Ist das bei 12:26 eine Art Auto Suggestion ein Tor zu kaufen ? ;)

@Bj005 4 года назад

ein glück war ich nicht der einzige der sich beim schaun gewundert hat was da flackert und nochmal zurück gespult hat :D

@SubiPerformance 4 года назад

hahaha ups 😬

@jangehlhaar7215 4 года назад

@@SubiPerformance Habe schon eins gekauft 😄 Ich schaue deine Videos sehr gerne, mir gefällt die Ordnung, die saubere Arbeit und das geballte Fachwissen. Unbedingt so weiter machen. 👍

@stephan1712 4 года назад

das neue Tor wo jetzt noch die Bundeswehrdecke hängt vermutlich :D

@GHEORGHE-IORDACHE 4 года назад

What silicone brand are you using?

@yauckyy 4 года назад

And what is the green fluid? Same kind of oil?

@Jeepbeersandburger 4 года назад

I have to visit your shop oneday

@pab1it05 4 года назад

Wäre es möglich, ein Video über einen kompletten Aufbau eines ej25 sti-Motors mit allen Drehmomentmessungen für den gesamten langen Block zu sehen? Ich verstehe, dass es eine Verschwendung Ihrer Zeit sein kann, aber es würde sehr geschätzt werden. Vielen Dank für all deine Videos und für dein Engagement.

@СергійБеров 4 года назад

What is the green lubricant? Mounting oil?

@yauckyy 4 года назад

Yes, answer Andy, please

@rivenmotors7981 3 года назад

What happened with this build? I loved it and want to see your results please!

@andreasweber5638 4 года назад

Oh! Bekommt die Knatterheidi für die Saison 2020 mehr Hupen spendiert? Wenn ja: Geilo!

@KevinD-WRX 4 года назад

PLEASE DO A FOLLOW-UP VIDEO OF THIS ENGINE INSTALLED IN A CAR!!!!

@FrankFiene 4 года назад

Ahh, Montage eines Boxers ist also etwas aufwändiger, weil man die Pleuelstange durch dieses Loch montieren muss. Interessant.

@Tracks777 4 года назад

nice content

@DoogieLabs 4 года назад

Where can I obtain the head stud and block bolt kit for the Eg33?

@denzilhitaua7739 4 года назад

Lol go to web page

@DoogieLabs 4 года назад

@@denzilhitaua7739 do you mean the subiperformance site where they have NO parts for the EG33??

@denzilhitaua7739 4 года назад

Doogie Labs oh well you know answer then. Ask him in German he might give you an answer?

@Happydays-w3z Год назад

do ou guys believe in dowel pinning the mains for structural integrity? for high horspower engines?

@shigekazusato335 4 года назад

アンディ！どうしてその様なピストンピン、クリップを使うのですか？しかも貴方のラベルをリベット打ちしました。

@Oscarho 3 года назад

Hello, I'd like to know what brand of piston ring processing machine is? thank you

@y.b.- 4 года назад

hervorragende handwerkskunst !!

@adamjamieson3981 4 года назад

What Subi is this engine going into?

@SimsonTuningteamOberlausitz 4 года назад

BRZ

@alessioanzalone9759 4 года назад

Can't wait to hear it... :)

@idrive96 2 года назад

Which piston rings you can recommend for ez36d?

@slothystyle 4 года назад

Subaru needs to throw an Tubro H6 into the 2021 STI model.

@TomLocura 4 года назад

how do you get the Gudgeon pins out in the first place? is it ring clip one side and circlip on the other?

@Tracks777 4 года назад

nice video

@Brighton-Abean 4 года назад

Were those 92mm pistons or was I seeing things?

@willecutlip 4 года назад

Who's main and rod bearings are you using? Thanks!

@quattropower6002 4 года назад

Wird Subaru wieder zeitnah einen Diesel in ihr Programm aufnehmen?

@SimsonTuningteamOberlausitz 4 года назад

Hoffentlich nicht :D

@1Skysonic 4 года назад

Сборка под пивко))

@TerraShogun 4 года назад

Je mehr ich mir sowas anschaue desto mehr will ich mir so ein Motorblock selbst fräsen lol

@fogalla 4 года назад

Amazing!!! :-)

@klesmer 4 года назад

To think of all those years I had to adjust the ring gap by hand wirh a little file.

@dielauwen 4 года назад

Because you do not use your brain.

@klesmer 4 года назад

We did that way because we did not have all the fancy toys that are available today. It takes just as many brains if not more to do it with a file than to chuck it up and let a machine do your work.

@winstonsmith1032 4 года назад

I did this with a little file as well. Since I wasn't doing it for a living like Andi, it worked just as well and gave the same precise results, just takes longer. Arguably more satisfying. The real skill is your touch with the feeler gauges!

@kalimist8 4 года назад

Nice! VLN20 wird groooß! :-)

@chrisj.1007 4 года назад

Klasse Arbeit, ich schaue die Videos sehr gerne. Aber irgendwie nicht so relaxed wie ich erwartet hatte. Und bei 9:43 wird nicht jede Schraube einzeln eingepinselt....das ist so ungewohnt :D

@michaelcarydakis790 2 года назад

i was told that you cant line up timing markings as h6 doesn't have timing markings

@frankfrey4344 4 года назад

Was ist das denn für ein "grüner Honig", der da in die Hauptlager und auf die Schrauben kommt?

@SimsonTuningteamOberlausitz 4 года назад

Im Prinzip dickes Öl. Bei den Bolzen damit die Gewindefressen und bei den Hauptlagern damit sie geschmiert sind bis der Öldruck aufgebaut ist

@RawRarTV 4 года назад

this gonna be a turbo build or NA build?

@SimsonTuningteamOberlausitz 4 года назад

@danchesney631 4 года назад

Why are the head studs in early?

@WorkingforGODglobal 4 года назад

So what Kw/Nm are you expecting from this engine ?

@СтаниславИгнатов-р4в 4 года назад

Сколько выхаживают твои моторы?

@Alex_Wurz 4 года назад

top

@gboelter 4 года назад

I love these Channel, nur schade dass es seit dem Umzug wohl fast nur noch 'Stummfilme' im Zeitraffer gibt ... 🤔

@ЮрийСамойленко-о8ю 4 года назад

Зачёт👍👍👍61 RUS

@jetjaguarXP 3 года назад

Anyone want to guess what they charged to build this?

@brucebaxter6923 4 года назад

why not pin the cylinders?

@DominickAPD 4 года назад

ASMR for Bros

@theotherfinnegan9955 4 года назад

I had to resub. hmmmm

@dielauwen 4 года назад

2 mistakes : First Do not use motor oil on rings and pistons. wd40 or penetrating oil as it flashes off at a much lower temperature to prevent glazing. Second you did not lubricate the undersides of the bolt heads possibly resulting in a false torque reading. CAT is shaking his head.

@jeffbecker8716 4 года назад

@13:10 - sexy. Worth the wait.

@officaldjflo 4 года назад

Better than sex with abagil danger.

@djmikkeee 4 года назад

Is this engine porn? 😂😂😂😎

@safaadnan4879 4 года назад

@freakyRunner 4 года назад

Schon toll wenn man einen Tim Schrick als Handlanger/Kameramann hat hehe

@alvintoussaint1916 4 года назад

Hello Andy I have seen some engine builders put torque plates on to ream the main bearings. What's your opinion?

@curvs4me 4 года назад

You need a crank balancing machine!! You have those beautiful 3 and 5 machines, why not balance the crankshafts as well. Veicomer does the best CNC porting and head work I've ever seen. Take a look at his channel. You have really strict regulations there so CNC porting and cams will get you another 20% while looking rather stock 👍🏼👍🏼