Тёмный

HIGH SPEED MACHINING - 8 Things You Need To Know! 

TITANS of CNC MACHINING
Подписаться 895 тыс.
Просмотров 81 тыс.
50% 1

Barry uses the Kennametal KOR5 Tool to explain the 8 most important things to consider when High Speed Machining.
Help us fund FREE Education by purchasing tools seen in our videos here:
TITANSofCNCTooling.com
FREE CNC Machining Academy:
rebrand.ly/TiAcademy
FREE Aerospace Academy:
rebrand.ly/TiAero
Subscribe for daily content and expert knowledge: rebrand.ly/SUBTITANS
___
___
FREE CNC Machining Academy. Join the Revolution:
rebrand.ly/TiAcademy
Follow us on Instagram:
rebrand.ly/TiINSTA
Like us on Facebook:
rebrand.ly/TiFACEBOOK
Join the conversation on our Facebook Group:
rebrand.ly/TiFBGroup
Connect with us on LinkedIn:
rebrand.ly/TiLINKEDIN
___
___
THANK YOU to our Partners who make this content possible:
Kennametal - rebrand.ly/TiKennametal
DN Solutions - bit.ly/DoosanTiYT
United Grinding - hubs.ly/Q013zHpC0
Mastercam - rebrand.ly/MastercamEDUTiYT
Blaser Swisslube - rebrand.ly/TiBlaser
Tormach - rebrand.ly/TiTormach
Solidworks - rebrand.ly/TiSLDWRKS20
Trumpf - rebrand.ly/TiTRUMPF2022
Trumpf TruMark - rebrand.ly/TiTRUMPFTruMark
Trumpf TruPrint - rebrand.ly/TiTruPrint
Markforged - rebrand.ly/TITAN-Markforged
Tyrolit - rebrand.ly/TiTYROLIT
Mitutoyo - rebrand.ly/TiMitutoyo
Haimer - rebrand.ly/TiHAIMER
LNS - rebrand.ly/TITAN-LNS
FANUC America - rebrand.ly/TiFanuc
Schunk - rebrand.ly/TiSchunk
ONA - rebrand.ly/TiONAEDM
#CNC #Machining #Machinist

Наука

Опубликовано:

 

30 май 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 136   
@josephcampise9950
@josephcampise9950 2 года назад
Barry just seems like the kind of guy you'd love to work with. Very experienced, knowledgeable, and down to earth.
@barrysetzer
@barrysetzer 2 года назад
Hey thanks Joseph! I think most people that know me would agree with you, there. Its all about keeping an open mind, putting others first, and staying humble. I have had guys with less than 1 year experience completely change my processes. Are you a member of our FB machinist group? If so, shoot me a friend request! Ill help out any time!
@josephcampise9950
@josephcampise9950 2 года назад
@@barrysetzer I've been a member for a short bit. I'll definitely send one!
@kryoz8121
@kryoz8121 2 года назад
The video when nobody is home: 02:09 The video when my mom comes in my room: 03:01
@tonyjohnson2256
@tonyjohnson2256 2 года назад
I use a 3/4 KOR5 endmill on some aluminum parts that I build. The cycle time on our parts went from 15 minutes to right around 5 minutes per part. And with the chip splitter the chip conveyor can easily handles the chips. I even use it as a finishing cutter as well. It holds great tolerances as well thank goodness our finish is not critical. I love the KOR5!!!!!
@mnucad
@mnucad 2 года назад
Just Great inspiration to get more from our machines. Thanks
@tdg911
@tdg911 2 года назад
Haha haha pixie dust... picked up a couple KOR5 DA and DS from the Titans of CNC store. Love them.
@TITANSofCNC
@TITANSofCNC 2 года назад
Thank you
@barrysetzer
@barrysetzer 2 года назад
Haha see man, they are monsters!
@tdg911
@tdg911 2 года назад
@@barrysetzer pretty cool finish they leave on the floor too. They chew up material so quick I haven’t been able to find the top speed/feed yet lol
@barrysetzer
@barrysetzer 2 года назад
That makes 2 of us 😂
@matthewhollenbaugh5138
@matthewhollenbaugh5138 2 года назад
It's awesome to hear the processing time from raw stock to that.
@travisjarrett2355
@travisjarrett2355 2 года назад
Solid video bro! Great rundown of the things to consider when taking out large chunks of material.
@FloweringElbow
@FloweringElbow 2 года назад
So did I get the basics of 1 to 8 right: have a 100 horsepower, and maximize rigidity? Thanks for the inspiring visuals - impressive!
@TITANSofCNC
@TITANSofCNC 2 года назад
Well yes, but he said you can use those variables on any machine so long you understand the machine and it’s parameters etc.
@brahtrumpwonbigly7309
@brahtrumpwonbigly7309 2 года назад
Basically, nah.
@FloweringElbow
@FloweringElbow 2 года назад
@@TITANSofCNC Thanks. Also, I should say your setup is awesome, lighting, multiple cam angles, and clear, clean explanation etc. Appreciate the effort you must put into these videos.
@BPond7
@BPond7 2 года назад
It’s a thing of beauty!
@duckslayer11000
@duckslayer11000 2 года назад
More videos like this please. Specifically I would like to hear about the relationship between IPT and radial depth of cut. HAAS glazed over the topic before but they left a lot on the table. Also E.M. feed rates based off of radial step over amount vs full on slotting. Thanks for all the great videos.
@KnoxGTX
@KnoxGTX 2 года назад
That is best answered by a cutter representative that can explain it really well. A simple explanation; There is a chip thinning effect with high efficiency milling/high speed milling/dynamic milling… The smaller radial step over, the less angle of engagement the thinner the chip, bigger radial step over the higher angle of engagement and the thicker the chip. Smaller radial step over - increase chip load Larger radial step over - decrease chip load It is difficult to give general speeds and feeds because there are a few things that need to be taken into consideration. Cutter, tool holder, setup rigidity, cnc machine capability, material. We are using a .500in Mitsubishi MEMSS specifically made for high speed machining in P-20. Mazak 510C vertical .875 DOC, .040 radial step over 710SFM @ .0103 / tooth 5400RPM @ 280IPM Spindle load is about 30% No coolant. Air blast only! If you want to transition into high speed machining, you should bring in a cutter representative from kennametal or Mitsubishi and they will help get you started. Edit Worth noting. Software like mastercam have dynamic tool paths that are designed to hold a constant radial step over for a steady chip load. That is why dynamic milled parts have a “wavy” surface finish.
@duckslayer11000
@duckslayer11000 2 года назад
@@KnoxGTX great explanation, you would make a good teacher.
@jiayitoolowen6404
@jiayitoolowen6404 2 года назад
Great video, wow, the sound of a great milling cutter is so beautiful. I am also going to sharpen this milling cutter so that the customer can cut like in the video too. Thank you for sharing such a great milling cutter
@vonpredator
@vonpredator 2 года назад
Quick! Everyone start clapping for Trevor 👏 👏👏 so he can make more pixy dust! 👏👏👏
@barrysetzer
@barrysetzer 2 года назад
NEVER! 😂
@trevorgoforth8963
@trevorgoforth8963 2 года назад
That’s right Barry, MORE pixie dust! 😆
@trevorgoforth8963
@trevorgoforth8963 2 года назад
Another morning, another video filled with incredibly useful info, great job Barry. P.S. The cry baby line was hilarious 😂
@barrysetzer
@barrysetzer 2 года назад
Love you too, Trevor 😂
@lizzardstuff6436
@lizzardstuff6436 2 года назад
lol u just made my morning well Barry that was hilarious 4:58
@trevor6512
@trevor6512 2 года назад
Now I want to see Trevor and Barry episode of just banter AHAH Great Video
@User-th6yy
@User-th6yy 2 года назад
Don't forget the rigidity of the Y and X axis needed to do some serious high speed cutting. Our 25 year old machine really struggles to keep stable at some high feed rates, not to mention the inaccuracy when turning the x and y axis from + to - in a circle for example
@williamevans6522
@williamevans6522 2 года назад
Incredible
@davegill8634
@davegill8634 2 года назад
Awesome Content Baz 👍
@leensteed7861
@leensteed7861 2 года назад
amazing mrr
@Jessie_Smith
@Jessie_Smith 2 года назад
Great video with a lot of great information as always Barry!
@barrysetzer
@barrysetzer 2 года назад
Thanks homie! You know how we DO!
@offplanet6882
@offplanet6882 2 года назад
So much to LEARN
@flikflak24
@flikflak24 2 года назад
I like the sassyness in the videos
@fryer05maverick31
@fryer05maverick31 2 года назад
I'll vouche for the KOR5 cutter, it's a Bad Mama Jama!
@alex4nder1
@alex4nder1 2 года назад
Kor 5 is music in my ears 🎵🌞
@Hydrazine1000
@Hydrazine1000 2 года назад
Barry, if you want to stick to big things, yet not miss the boat on 3D printing / Additive manufacturing, you should look at WAAM, Wire Arc Additive Manufacturing. Or, in lay-man's terms, 3D printing by weld bead stacking. There is a renowned crane builder here that has succesfully 3D printed a set of 350 ton rated crane hooks. 1700 kg (3750 lbs) a piece, about 90 km (56 mile) of welding wire used for each, and they are not a fancy concept, they are Lloyd's Register certified for lifting.
@barrysetzer
@barrysetzer 2 года назад
Haha I may give Trevor a little crap now and then, but he's awesome. And I LOVE additive. I have actually machined parts made by WAAM, as well as laser sintering. That really is the future..........
@Hydrazine1000
@Hydrazine1000 2 года назад
@@barrysetzer A very big YES on that last bit! (I've got an MSc in Materials Science & Engineering and I've been to the Formnext exhibition and conference on Additive Manufacturing in Frankfurt twice now, so I know what's up. It's one helluva paradigm shift!)
@user-pr2sn8oo4j
@user-pr2sn8oo4j 2 года назад
O, Barry! Glad to see your video! your cutthrouw is awsome!
@barrysetzer
@barrysetzer 2 года назад
Hahahaha thanks bro! Always awesome talking to our brothers from overseas!
@user-pr2sn8oo4j
@user-pr2sn8oo4j 2 года назад
@@barrysetzer hah! i from russia, country with drunken bear and balalayka))
@rw3468
@rw3468 2 года назад
I wish I could just buy these tools and use them... but 😮‍💨 I can't spend all my money on tools for my boss lol I do it enough already. Sometimes we gotta make due with what's provided. Love you videos. Thank you
@barrysetzer
@barrysetzer 2 года назад
Hey bro, are you a member of our FB machinist group? If so, shoot me a friend request and I will send a message to you for your boss. If you arent, then JOIN IT and tell them Barry sent you 😜
@Birb_of_Judge
@Birb_of_Judge 2 года назад
7 minutes?! That's insane, i wish I could do something at this at my company.
@MANIEK576
@MANIEK576 2 года назад
That is, I'm not the only one talking to the machine to smack me with chips. Greetings
@greghartman5895
@greghartman5895 Год назад
There's something about chips flying all over the place that just makes my day. Can't explain it.
@barrysetzer
@barrysetzer Год назад
Man i am right there with you!
@gilbertogarcia1732
@gilbertogarcia1732 2 года назад
Loved this 😂
@Metaldetectiontubeworldwide
@Metaldetectiontubeworldwide 2 года назад
Haha ...popcorn ✅ safety glass on my mobile ✅ Bring ON those MONSTER CHIPS 😄⚡
@mp6756
@mp6756 2 года назад
I have to ask how much stress are you imparting into the aluminum while blasting away material that fast? Do you need to reclamp the stock after a roughing operation so you don't end up with a banana when you release the finish part from the vices?
@71mnwild
@71mnwild 2 года назад
The triggering of Trevor was hilarious I must say
@gertkristensen6451
@gertkristensen6451 2 года назад
this machine is monster big and solid ..
@fightswithspirits915
@fightswithspirits915 2 года назад
I'm interested in how that stock is made. Quality materials.
@mohammedalbattal77
@mohammedalbattal77 2 года назад
Nice👍👍👍👍
@Kardos55
@Kardos55 2 года назад
Love the fact that everything is always so clean and organized. Nice sound and great visuals . . . oh and you left out the real number one - the master that makes all the magic happen: Barry!
@barrysetzer
@barrysetzer 2 года назад
Ahhhh but without YOU and Mastercam, this video would have been very different! Thanks Karlo!
@Sara-TOC
@Sara-TOC 2 года назад
Is that all it takes Barry? Smack you with some chips? .. 😅 Just Joking. Thank you for another masterpiece! These are great tips for all machinists consider! These tips will enable a machinist to troubleshoot, maximize efficiency, and get the best performance from both machinery and tooling. You and team Titan demonstrate that well! BOOM!
@barrysetzer
@barrysetzer 2 года назад
Hahaha OH YESSSSSS! Thats what it's all about! Machining red pills for everyone!!!!
@dennischristensen5892
@dennischristensen5892 2 года назад
I kinda begin to think of TITAN as the mad machinist metal shop ;D
@williamofhler5613
@williamofhler5613 2 года назад
why not 3 vices? that overhang on the ends looks extreme
@barrysetzer
@barrysetzer 2 года назад
It worked tho 😜
@lonelyplanet1080
@lonelyplanet1080 2 года назад
probably because the 3rd one wasn't needed
@brahtrumpwonbigly7309
@brahtrumpwonbigly7309 2 года назад
Overkill doesn't hurt, but it is overkill. That material was thick af boii
@greg2337
@greg2337 2 года назад
The material was visibly vibrating. I wouldve at least added a machinist jack and hockey puck under it. BUt I cant argue with Barry, it did work without another vise. I wouldve added another.
@offplanet6882
@offplanet6882 2 года назад
OMG DAM BIG BIG STUFF
@jerols-wy6sd
@jerols-wy6sd 2 года назад
What do you guys think about Fraisa tools?
@norbertfleck812
@norbertfleck812 2 года назад
As there are a few hundred tool manufacturers producing carbide mills, it's unlikely that Barry knows them all.
@TommiHonkonen
@TommiHonkonen 2 года назад
Omg when you stepped in the machine I had flashbacks to cribs or something
@barrysetzer
@barrysetzer 2 года назад
HAHAHA well, we really are the RU-vid version of “Pimp my machine shop.” 😂
@highpointsights
@highpointsights 2 года назад
My question is this. Given your outrageous feeds and speeds, do you consider machines expendable? Is replacing them regularly part of your budgeting??? I'm guessing most shops can't afford that?
@barrysetzer
@barrysetzer 2 года назад
It depends on the machines. The machine in this video is meant to be run this way, it's what the machine and spindle were built for. Now, if this were a HAAS, we would consider them expendable. The secret though is that by running fast, you make far more money in 5 years than what the machine cost you.
@ryanjordan7113
@ryanjordan7113 2 года назад
I get amped on nice paths too Barr. However some degrees of excitement we must keep under wraps😂😂
@barrysetzer
@barrysetzer 2 года назад
Hahaha NEVER!
@ryanjordan7113
@ryanjordan7113 2 года назад
@@barrysetzer it’s one of those corky machinist things. It’s weird; but when you get it, you get it! Looking for a little advice. What’s a really nice hard milling tool you like? Cutting some 4140 right around 46-48 Rc 3303 rpm 15 ipm .001 ipt 5 flute 8mm cutter. Any suggestions are welcome/appreciated. Also on my last EM the one I’m using is discontinued. So I’m looking for a nice good new cutter. Thanks Barry! Wire machine sludge will just never be as cool as big ole shredded chips😂 tell him I’m sorry. Just the way it is.
@barrysetzer
@barrysetzer 2 года назад
@@ryanjordan7113 I am actually cutting some 50-55 Rc steel right now. I am using a Kennametal Harvi 3 Aero. It's a 6 flute that won the Boeing challenge for tool life. I am currently cutting with a .75" tool, 1" deep, stepping over .1", at 2500 rpm and 70ipm. I could probably push it way faster, too. You can also have a look at our store (link in description) so that you can see the pricing.
@ryanjordan7113
@ryanjordan7113 2 года назад
@@barrysetzer perfect man! Thanks. I’ll check out the link and have the purchaser grab a few tomorrow. These Union carbide 5 flutes were the only tool we stocked in the auto crib for hard milling. So I was asked to source a replacement. Somthing that could be used in a wide range and have reliable life ect… Thinking to myself who’d have the best insight on this, you came to mind right off the hop! Thanks again brotha. Once I get it swapped out and In tune with the work I’ll let ya know how they work out.
@zajawamotocykle9256
@zajawamotocykle9256 2 года назад
Hi Barry
@barrysetzer
@barrysetzer 2 года назад
Hey buddy!!!
@ferryjambul
@ferryjambul 2 года назад
how to make a tutorial on how to toolpath for 3d objects to cnc 5 axis
@dampfexpress
@dampfexpress 2 года назад
Yo Barry, since your monster of a machine has a Heidenhain control...have you ever worked with the OCM cycles? I bet you would like it :P
@barrysetzer
@barrysetzer 2 года назад
Hey there! To be honest, I have not! But I do like the Heidenhain control. Finally I can load a program that is longer than 120 bytes LOL
@dampfexpress
@dampfexpress 2 года назад
@@barrysetzer Big Parts - big programs! :D
@RMBRacingInc
@RMBRacingInc 2 года назад
If only Kennametal would get safe-lok on the TE end mills. We had to go back to a side lock holder in order to keep the tool from pulling out even with using a HydroForce holder.
@barrysetzer
@barrysetzer 2 года назад
I actually brought that up to some of their higher-ups recently!
@RMBRacingInc
@RMBRacingInc 2 года назад
@@barrysetzer My Rep has been bugging them like crazy over it. Once you get to that size of end mill it is just necessity.
@norbertfleck812
@norbertfleck812 2 года назад
Haimer is also providing that safe-lock feature and some others. If a Hydro-force holder is too expensive, you can also use a Weldon type (the cheapest you can get), heat shrink holders or mechanical Albrecht extreme force holders which even provide a safety lock which makes it absolutely impossible to pull a tool out.. Weldon holders are not too precise, but they are very cheap an still great for roughing at high mrr. It's impossible to pull a tool out of a Weldon holder. I am using right now a Weldon holder to rough mild steel with a 20 mm endmill, 4000 rpm, 1500 mm/min, 15 mm deep, 50 - 90% material coverage. We run that one dry, the monitor shows 15 - 20 kW spindle load. 1 inch is 25,4 mm
@TITANSofCNC
@TITANSofCNC 2 года назад
I took your comment right to the heads of Kennametal… because I agree with you. If you look closely, the huge full slot videos we do on the NHM are using side lock. Titan
@DolezalPetr
@DolezalPetr 2 года назад
We got in a job of nightmares, two large steel cubes, far too big for our machine. Normaly my boss would send me drawings and jobs to approve, but this time he just approved this job by himself, he did not even study the drawing propperly, we had to buy special tools for over 2000$ for these large bores in the cubes with huge threads and internal grooves right at the bottom of these deep holes, we had to buy milling cutter extensions to machine all the features on all sides, we had to buy thread gauges to inspect the threads, the cubes were huge and the job was rushed, he gave us only 3 days to finish it, we had to push our machine to its limits, otherwise we would not make it in time. We stopped the spindle 3 times on one cube, machine overloaded like crazy and it still was not enough, we had to send it out to a different company for machining, they had a huge machine that had no problem with it. My boss lost over 3000$ on this one job because he did not consult it with us and it just had to be done for some reason. The next day we tried machining aluminium and we could not take even the lightest of cuts, we discovered that the Y axis was completely clapped out, almost 0,1mm of play in it from trying to machine the steel cubes, just a complete nightmare.
@barrysetzer
@barrysetzer 2 года назад
Oh man! Ive been there, too. Gotta love when someone else over commits YOU. But you gave it your best effort, and that speaks to how good you are, at what we do! 💪
@DolezalPetr
@DolezalPetr 2 года назад
@@barrysetzer Thanks Barry, you are the boss! 🤟
@brahtrumpwonbigly7309
@brahtrumpwonbigly7309 2 года назад
Darn bosses. He saw dollar signs and didn't look back.
@ferryjambul
@ferryjambul 2 года назад
what is the difference between hss and carbide endmills for machining cnc milling?
@VirusDragovar
@VirusDragovar 2 года назад
In general, the main characteristic of all High-Speed-Steels is a high working hardness with excellent toughness. HSS tools also cost less than Carbide tools and are often a good solution in ‘high-mix, low-volume’ applications. Carbide is much harder, so it has a longer tool life and faster cutting data than conventional HSS. But the downside of that hardness is brittleness, so the cutting edge on carbide tools can quickly fracture or chip in certain situations.
@ferryjambul
@ferryjambul 2 года назад
which aluminum workpiece is suitable for use and if it is possible that the carbide can break, why?
@norbertfleck812
@norbertfleck812 2 года назад
HSS is simply outdated. The price difference is not worth the loss of performance. We use carbide mills for everything from plastics, wood, aluminium, brass, CuAl bronze, mild steel, tool steel, up to hardened steel. Most of our aluminium parts are AW7075 but we also run such speeds even with a much smaller (25 kW spindle) machine. However, coolant is always a good idea if you machine materials with a low melting point.
@leonschumann2361
@leonschumann2361 2 года назад
Barry going big but Trevor doing precision work. Like Barry has the size but Trevor can find the G spot ... l mean code
@barrysetzer
@barrysetzer 2 года назад
😂😂😂
@mannydiehard1
@mannydiehard1 2 года назад
That guy is hilarious 😂
@rameezsheikh7576
@rameezsheikh7576 2 года назад
30" (inch)
@jaylabarre4444
@jaylabarre4444 2 года назад
wich toolpath did you use for this piece ?
@barrysetzer
@barrysetzer 2 года назад
Dynamic Optirough
@jaylabarre4444
@jaylabarre4444 2 года назад
@@barrysetzer i dont see any retract for Z step .. did you cut it out for the video or how you do that plz
@barrysetzer
@barrysetzer 2 года назад
@@jaylabarre4444 On linking parameters, I used minimum vertical retract, .1" linear entry, .5 horizontal arc entry, .1 horizontal arc exit. Also, on cut parameters page I told it to never retract over gaps, and to keep tool down within 1" distance
@jaylabarre4444
@jaylabarre4444 2 года назад
@@barrysetzer haa ok soo the movment is just very fast and small i see thx for the info ;)
@jmowreader9555
@jmowreader9555 2 года назад
Would it have been better to machine the inside first? This would make holding the piece for the second operation easier.
@barrysetzer
@barrysetzer 2 года назад
Machining the bottom actually isn't required. The tool is used to form sheet metal, and the bottom just rests on a table
@jmowreader9555
@jmowreader9555 2 года назад
@@barrysetzer Oh, that's cool. Is this for hydroforming?
@barrysetzer
@barrysetzer 2 года назад
Hahaha YES! Surprised anyone actually knew what hydroforming is! You have just received 70 “Barry cool points.” You must be a fellow aircraft guy!
@jmowreader9555
@jmowreader9555 2 года назад
@@barrysetzer I used to have REALLY exotic antennas and feedhorns hydroformed out of soft aluminum. Great process, so long as you can find a shop that isn't going to ask you "what the hell is this thing, and why do you only want one?"
@mrbmp09
@mrbmp09 2 года назад
A short tool is a rigid tool. That's what she said.
@barrysetzer
@barrysetzer 2 года назад
Yeah……..pretty sure she didnt say that 😂
@NJTurboZ28
@NJTurboZ28 2 года назад
Find yourself someone that's looks at you the way Barry looked at those chips!! Lol
@barrysetzer
@barrysetzer Год назад
😍
@highpointsights
@highpointsights 2 года назад
You didn't show a close up of your milling cutter???
@norbertfleck812
@norbertfleck812 2 года назад
Aluminium 6061 does not hurt a carbide mill at all. The only hazard are overheated chips sticking to the tool - filling up the flutes.
@user-vw6bw8kr4c
@user-vw6bw8kr4c Год назад
I feel like most of us machining guys have a similar goofy sense of humor. OR we are super nerdy hahah
@alexc5564
@alexc5564 2 года назад
This is the cool shite 😎😎😎
@frankf.7970
@frankf.7970 2 года назад
👏🙆‍♂️💗
@carlospineda3068
@carlospineda3068 2 года назад
meh. your MRR decreased the higher in z you went. to avoid that you could've gradually increase engagement. im sure MasterCam can do it right? also, Why explain High feed milling on aluminum.? its easier to spot the advantages of it on More exotic metals.
@Talinthon
@Talinthon 2 года назад
I'm gonna call your bluff. I want to see this one cutter make literally 1000 pcs of this part.
@barrysetzer
@barrysetzer 2 года назад
Lol, come on man. Its ALUMINUM.
@Talinthon
@Talinthon 2 года назад
@@barrysetzer Actually, I just want to see if you'll go crazy doing the boring production stuff.
@dadtdm5646
@dadtdm5646 2 года назад
@@barrysetzer - Even so 7000 minute tool life....probs not 🤠
@hamzanawaz7945
@hamzanawaz7945 2 года назад
Boooooom
@kravselj
@kravselj 3 месяца назад
it's simple to run these simple test parts with constant load like this. But in real life when you have real parts it's not that simple.
@RT11714
@RT11714 2 года назад
Trevor was indeed very sad
@shbooby5258
@shbooby5258 2 года назад
3:03 if you don’t talk to your machine like this your not doing it right!
@barrysetzer
@barrysetzer 2 года назад
Hahaha YESSSSSS. This guy GETS IT
@dan3076
@dan3076 2 года назад
unclamp it and....... BOING
@beachboardfan9544
@beachboardfan9544 2 года назад
Y'all should've labeled this nsfw! 😆
@DolezalPetr
@DolezalPetr 2 года назад
true XD
Далее
Master The Most Important Tool In Machining
13:06
Просмотров 54 тыс.
The tactic worked 😂#shorts by  Leisi Show
00:26
Просмотров 3,8 млн
How HARD Can We Push This MONSTER END MILL???
10:47
Просмотров 93 тыс.
How To Master The ART of Machining Plastics
13:01
Просмотров 52 тыс.
MACHINING The HARDEST METAL On EARTH
8:21
Просмотров 120 тыс.
FULL RAPID at 2362 IPM In STEEL
6:53
Просмотров 146 тыс.
Gearless Magnet Bike
17:57
Просмотров 6 млн
Сложная распаковка iPhone 15
1:01
Просмотров 14 тыс.
Подключил AirPods к Xbox
0:45
Просмотров 23 тыс.