Here is an easy to build high voltage igniter that can be made fairly cheaply. Ignition coils require their 12v power source to be interrupted for them to release the charge on the high voltage side. Inserting a simple 40amp car relay and wiring it to turn itself and the coil off and on again repeatedly produces a high voltage spark I use to ignite my pulse jet engines.
Below is a list of parts needed. I sourced most of it from Amazon and there are affiliate links provided to the exact parts I used here in this video.
Build Parts:
40amp 5 pin car relay amzn.to/3w3c2hF
12v ignition coil amzn.to/3w3cc8L
Condenser amzn.to/3CLwabR
Extra Wire (I used an old light gauge extension cord) amzn.to/3GKCeSW
Shrink Tube (optional) amzn.to/3w8XJYV
12 volt battery amzn.to/3XdTM0Z
Crimp on Ring Terminals amzn.to/3QJntoj
10-32 bolt and 2 nuts
JB Weld (Optional) amzn.to/3GIMhYS
Tools Required:
Wire Strippers
Soldering Iron (optional)
Solder (optional)
Soldering Paste (optional)
Wrenches
Welder or JB Weld
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/sky-toes/lilly-red
License code: JCWG9ZSMVDDASVQR
14 янв 2023
