Check out the step-by-step video to build this circuit: • IGNITION COIL DRIVER -... PARTS LIST BELOW:
-Ignition Coil - Old can type
-single or double sided circuit board
555 timer: amzn.to/2YF2Mx2
8 pin IC socket
100k ohm potentiometer - Good assortment here:amzn.to/2YGiurP
56 ohm fixed resistor - Resistor assortment here: amzn.to/2Kup9QM
100 ohm fixed resistor
620 ohm resistor
6.8k ohm resistor
82k ohm resistor
1N5400 or 1N5400X diode (1N5400 through 1N5408 should work)
1N4005 (1N4006 or 1N4007 will also work)
2X 1N4148
IRF640 MOSFET: amzn.to/31eXLwK
Heatsink for MOSFET
1uF Tantalum Capacitor
0.1uF Tantalum Capacitor
0.01uF Tantalum Capacitor
Add some ferric chloride, or your etchant of choice!
A very simple 555 timer driver circuit powering an old ignition coil with some great results. The schematic and PCB were both found on the Chemelec website (chemelec.com/Pr.... I used the toner transfer method to create the PCB and ordered the parts needed to make it. It was a very simple circuit to put together, and really puts out some incredible sparks!
The above contains amazon affiliate links which help earn the channel a small commission to continue making videos.
3 окт 2024