Highest Heat Resistant Liquid Wax On The Market! 3D HD Poxy!! 

Who, amongst you enjoys the warm glow of a carnauba wax?

Thanks for your tireless dedication!! You are a MACHINE!!

I used HD Speed for a paint enhancement then topped it with Proxy and topped that with 3D Bead it up. Super slick and hydrophobic and glossy as hell.

Hi Brian ! yes I got HD Poxy, I use on my car 1years ago on paint, trims, glass windows, rubber seals and headlights. Looks like I did this yesterday, (looks wet ) great stuff...….. Thanks for the video.

Another top shelf video B. I feel like you are my higher learning chemistry teacher!!!

Boy I am impressed with this presentation, chock full of concise information and instruction. No gabby BS typically found on auto detail videos.

I learn something every day watching you!!

3D One plus 3D Epoxy Montan Wax is my go to combo to take care of my car and fight the sunlight and heat here where I live in TX.

I'm a big fan of Finish Kare Hi-temp paste wax. It work nearly the same. I also love 3D products and will have to get some.

Woohoo. Tuesday lunch video. Yes always loved Poxy. A great product.

You are a true detail whisperer!

Thanks for the informative review of 3D HD Poxy. Will try some.

This stuff is awesome. Now they just call it 3D Poxy

Poxy has to be the easiest to use liquid wax I ever used. Very crisp application and removal. Slick finish too. Seems to have at least short term durability. If it can make it through a Metro Detroit winter, then it's a winner! Don't know yet though. Duragloss 111 is what I like for winter protection..

Great demo. Amazing product!

Brian I had no idea you were in Pennsylvania. So am I. Dead center of the state in Lamar. I want to try Poxy because I really like 3D products. Their 500 and 520, the 501 and 502 as well as the 3D One with 50/50 urofiber pads. I also like their Nano Pail Pre Soak and Nano Pail Soap. I have been using with great results the Meguires Hybrid Ceramic Wax with Meguires Ceramic Detailer after washes on my vehicles as well as customers. I just want to try something different and since I have great luck with 3D products i was going to try 3D Poxy and use 3D Bead it Up after maintenance washes.

hi Sensei, did you check how long the wax stays on the varnish? uses only the "Detailing Wash" "Grit Guard Two Bucket System" with the full detailing philosophy ...

did he say wait 45 mins or 4 to 5 mins b4 wiping off

DA applied gives great even adhesion especially on dark colors .

When the light hit just right there was a lot of streaks . Applied to much?

Excellent review of this product. I like the ease of use with nice resultsThanks 👍🏻

Please do some review on Finis Kare Hi Temp past, aka FK1000P Big White. Respect for your work

Great video and an interesting product. 👍

another great video again buddy 🍻🍻

I recently saw the outcome of this wax, really deep and glossy. Was curious though with the 2 active properties can this be topped on a sealer?

Wow great vid!! Keep up the good work.

Great video! If I have some 3D wax left will I have to strip it off completely before applying a new coat or can I just add to keep maintaining it.

Awrsome buddy I'm digging your channel

Her ay uygulansa boyaya zararı olur mu

Awesome description of the product Brian. Have you tried any of the FUSSO coatings I heard that it is pretty good.

How easily does it clean from the pads? I now have dedicated powerlock+ pads because it won't come out. Picked up poxy but before I lose more pads to dedicated products, I'm trying to get info first lol. Thanks! Great video!!!

Love wax

can this wax remove a fine swirls? like the goldclass meguiar´s?

Wish I could still buy this in aus used to be my no1 and was so cheap as well

Can you use this in conjunction with hd speed?

is it safe to use this wax over another wax ? its fully organic?

Can you apply the 3d cherry wax on a wet surface it says it gives a deep gloss and wet look.

Tried HD poxy for the first time yesterday; applied with griots garage basic 6"+3D Black Spider foam pad. Works just as you illustrated, great shine. Do you suggest or do you think it's even necessary to top coat this with a spray detailer like Bead Maker (etc) after maintenance washes? It's an extra step and I wondered if it will make it last longer or make any difference at all.

Can a short throw polisher work just as great as a rotary?

What is an ip solution? Straight alcohol? Or diluted?

Can this product be used on a fiberglass boat aka gel coat???

How much should I pay for a small or large size vehicle wax? By a professional

Good night send me this one for me in Brazil.😁

Can you review dodo juice purple haze? I keep/reading nothing but things on how easy it is to work with and the amount of gloss it provides.

The small section looks exactly the same as the rest of the hood.

Can u put 3D HD Poxy to the test with an other wax or sealant

Great video as always! I used this product in direct sun light (I know that’s a big don’t) but I had no option. I only left it on the panel for 15 min because of the sun, but when I wiped it off, It wouldn’t wipe off completely. It would leave some hazy spots that I was only able to remove by really putting some elbow grease into it. Do you think this happened because it was done in direct sun light? Thank you in advance.

Newbie here but a question, how to achieve the wet look for your car?

The title says most heat resistant... I am expecting some kind of heat test to prove its durability using some kind of “heat”. The thing is nowadays 99% of waxes tested are by ipa, strong solvents, strong soaps etc which is you dont encounter everyday in a parking lot. It is the sun’s UV that pushes these products to the limit in protecting the paint.... I hope you can make a vid that really tests these products for their heat durability... if these waxes can really withstand it. thank you for the vids

Have you ever tried the Xtreme Solutions Poly-Seal over this wax.

Bri...my "everyday" SUV (parked outside N. Ohio) had a coat of Collinite 845 applied about 6 months back (after a full prep / clay / etc.). Would I be able to apply this product directly without a prep for some additional paint protection for the winter? Or would you recommend something like McKee's 37 for that task? Or neither without prepping first? Thanks and keep up the great work!

Can it be applied over a ceramic coating?

What do you think about topping that with UFF on a dark colored car? I wonder if you would end up with the depth and glow with added longevity?

Do you like the chemical guys 6 in or the gg griots 6 inch cause that chemical guys 6 inch look like it’s a nice machine

So its heat resistant, but dawn dish soap removes it.

I tried this out a time back. Easy to work with, but don't really have a use for the product.

How do you think it stands up against the G garage 1step polish n sealant I used gg 1step B4 the summer , blk car not garaged Still looks amazing 😉

Can this be applied in direct sun light

what would be the next best product like this for mobile detailer? (cant wait there for 30-45 mins just for it to cure)

Would this be similar to a ceramic infused wax like Angel Wax's ENIGMA?

Why are you working the wax so much? Both by hand and the machine took forever. There is no corrective properties.

Heat resistant, how about fk1000 vs HD poxy??