The CHEAPEST Way to Permanently Fix Peeling Paint!

Подписаться 546 тыс.

Просмотров 1,3 млн

50% 1

Welcome to the #1 Video on how to fix your peeling and fading paint on your car. DISCLAIMER: No fancy tools needed to complete this job! In this video we paired up with Paintscratch.com to bring you professional paint packaged up in a easy to use spray can. This guide will take you through the very basic steps of sanding down your faded paint, repairing it and then returning it to the original shine it had when it rolled off the factory line!
TO SUPPORT THE CHANNEL AND PURCHASE MERCH: paintsociety.bigcartel.com/
To share your project or ask questions please join our facebook group: / 440942309941585
Instagram: paint.society
Visit paintscratch.com for any of your paint needs for your car. I recommend at least 1 can of primer per panel, 2 cans of basecoat per panel and 1 can of clearcoat per panel. It is best to have extra because not all colors cover as easy.
Clearcoat: amzn.to/3qlJkmH
Sandpaper:
Faded Paint Job Pak: amzn.to/2Ov1llb
Clearcoat Sanding for buffing Job Pak: amzn.to/2MQ7OXA
Yellow Hand Sanding Block: amzn.to/3sUQtMI
Gray Scuff Pad: amzn.to/3pyzwoW
Buffing:
Buffer: amzn.to/3qEpKmh
CSI Polishing Kit: amzn.to/3rCrSeK
Other Products used in the video:
Kovax Dry Guide Coat: amzn.to/2ZWzyws
Eastwood Guide Coat: amzn.to/3rq6mKs
3M Respirator: amzn.to/3cHjVkq
Paint Suite: amzn.to/3sSs3TL
3M Plastic: amzn.to/2MAdF2B
Automotive 1.5 Tape: amzn.to/2YjKWlo
Wax and Grease Remover: amzn.to/39TsYeK
Water Based Cleaner: amzn.to/3tNbERZ
Tack Rag: amzn.to/3bYWC5g
Bulldog Prep and Clean: amzn.to/3ciS8X3

Авто/Мото

Опубликовано:

5 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 812

@Munky332 3 года назад

Dunno why, but I prefer these at-home in your own garage paints more than the ones in the big booths with the complex gear. I guess its because I'm more of a DIY guy and seeing this kind of stuff helps me see it from how a professional painter would "attack" a project like this and how they think about it, versus how I would think about it.

@analazcano6475 Год назад

And to oeave your car in there for 2 to. 3 weeks, and they may even drive your vehicle huge no no

@catsmeow5566 Год назад

It came out better than a "professional" job on a vehicle that my insurance covered. The body shop left me with orange peel texture on the paint & took 2 months to get it back to me.

@250r6 Год назад

I never really knew much about auto body work i always saw it as a really difficult project that the average joe in his garage could not achieve like a professional paint shop but these videos give me a bit of confidence and makes me want to try it out myself also really satisfying to watch

@MTLJack 4 месяца назад

the thing is , those big booths allows to paint wider, whole car and bigger areas. Way better ventilation and paint dusts extraction. You can't say 'at-home' is better than big booths lol , thats just too immature. When you paint at home, your whole house inside is exposed to the paint dusts as well. If you smell the paint spray, you breath it.

@Munky332 4 месяца назад

@@MTLJack Did I say it was *better* in any context above? I said I preferred a vid where a dude who does this day in and day out can look at a project and say "here's how we're going to approach this and get good enough results that can be replicated by DIY'ers at home" I understand the detriments of painting at home, I've done it five times now on entire vehicles, and several other times on smaller parts.

@Pillzb3rry 3 года назад

I appreciate you doing these "spray can Jobs" because it motivates me to do them. Please do more!

@wiggitywhitefox 3 года назад

For real tho been talking about rattling my 88 d21 work beast but this is helping even more

@buakawfan333 3 года назад

I had a crushed wing panel, quoted £300 minimum to get it replaced. Got my own panel for £60 and lets say about £60 on paint, primer, lacquer, tac cloths, sanding pads and rubbing compound. I won't include all the tools haha I had to get a torque wrench, socket set and ratchet, spanners. But those things I needed anyway and will be used for all sorts of things in the future. All sorted, looks great and I learned a lot about the process. It did take a bit of time though. One thing I would recommend to anyone is when sanding, use a sanding sponge as it's more flexible and soft, not the paper which is tougher and has pressure spots. Also, don't give up, learn as you go and adapt what you do.

@FindShindoHere 3 года назад

@@buakawfan333 j

@coryjackson6034 Год назад

@PutOnTheGlasses thanks good prep talk you just talked me into it 😃

@vyseerx 3 месяца назад

Brian is a PhD in painting. He is a super good guy. He is a great teacher as well. Thanks Brian for all you do. I get the feeling that had he not chosen painting, he would have been a philanthropist/ professor ! Have a blessed day Brian !!👍👍

@Seeeeyaaaa 3 года назад

Brian you're an absolute gem mate, one of the best Pro/Diy paint guys on RU-vid. Fantastic Channel!

@johnburch6927 2 года назад

I am still amazed at how well the 2k clears flow out, and the gloss/finish is absolutely incredible as a result. Imagine, out of a rattle can.

@docz3ro231 2 года назад

I've been using it on a 91 F-150 that I'm working on and it's legit. I'll never use another clear coat.

@Aikaramba12 Год назад

@@docz3ro231 what kind of respirator do you use?

@mule666 Год назад

@@Aikaramba12 come on man

@flyingsodwai1382 10 месяцев назад

Looked good enough to me that I would consider doing a whole car.

@jewelleryaddict 8 месяцев назад

I recency did our outdoor patio furniture was so surprised it came out so well. Love spray painting have been doing for years but the new products are the best, less problems then the older sprays. .

@mgmaier75 2 года назад

I can't tell you how much I love watching your videos over and over and over and over.Great Rattle can finish!!

@DonBMW 3 года назад

Wish I had homies like this dude! As always great work. No one even comes close and with spray cans. Totally doing this.

@harrynazarian3184 3 года назад

Daaaaamn, see I love it when you show off your rattle can skills because I connect with you as a DIY'er. Money has been a bit tight because of COVID and all, so I can't go out and get a paint gun, water filters, and a proper compressor. But when you do videos like this, I am floored at the amazing end product. Thank you so much for this video. Absolutely gorgeous.

@GarageNoise 3 года назад

Great video Brian! I'm impressed with how well the clear laid down out of an Aerosol can.

@D9412G 3 года назад

Your an excellent teacher Brian! You clearly explain each step of the process. Keep the videos coming!

@meepmonster750 Год назад

Dad?

@philtucker1224 2 года назад

Brian that car looks so good and it’s just the sort of job I would tackle for my kids and their family cars. I’ve been doing little repair jobs on family cars for 40 years now but I’ve learnt so much more in the last few years following you! Thank you buddy!

@samt3306 3 года назад

This is exactly the video I needed! The cab of my S10 is 50% peeling clearcoat. I'm happy to see a DIY process that could make it more presentable! Fantastic job as always!

@PaintSociety 3 года назад

Thanks !!

@ashshahzad6773 3 года назад

Really loving this home series. These tutorials are so helpful and realistic. Great job buddy as always! 👍

@ronaldbartlett898 3 года назад

Fantastic results as always from you Brian. You explain everything so well with your knowledgeable experience. Only through your expert advice was I prepared to even consider attempting to respraying parts of my car with metallic paint, covering previous owners respraying shrinkage marks. I’m well pleased with my results now. Thanks a million!

@derekcook499 3 года назад

Thank you for making these videos. Ive been able to make my cheap honda civic look so much better on a tight budget and boosted my confidence doing body work

@michaelpuente3352 3 года назад

“Your hands are your best friends” - this man ain’t never tell a lie

@elelegidosf9707 Год назад

Especially when you're a single man

@meejmuas8686 2 года назад

Thanks for dropping all of the paint knowledge. Greatly appreciated

@nilebrixton8436 Год назад

I've been putting off on repairing and retouching the paint job of my 15 yrs old car. this video shows I can do it with limited tools. I appreciate the step by step instructions.

@alexscruggs8792 3 года назад

Hey Brian, How are you doing today? Your channel is a great help to me. I’m trying to get back in to painting but I’m doing more mechanic work that ever. Thanks for the tips!

@PaintSociety 3 года назад

To get yourself fit with Paint Society gear so you can look good whole painting head over to: paintsociety.bigcartel.com/

@santosrodas3174 3 года назад

Amazing, keep up with the good work brother. Congratulations for everything that you do.

@msvideos234 3 года назад

YES!!! finally something doable for minor fixes. thanks, dude!

@Ruffianthystoic 8 месяцев назад

As a used car dealer you've helped me so much getting ish done. Thank you !

@PaintSociety 8 месяцев назад

Awesome!

@legitjay4021 2 года назад

Awesome! my car was recently stolen & sprayed black so I gave up on fixing the paint but now after watching your video I got some motivation to fix it!

@eyesalooking Год назад

This is the most helpful video for the step-by-step DIY video that I have watched. We only have a hood to do that has lifted clear coat, so this is the video I needed to see.

@Pallidus_Rider 3 года назад

Videos just keep getting better. Love this series 👍

@yourhandlehere1 2 года назад

Rollas! I've been driving a '68 for about 34 years now. Needs a lot of "pretty" work, missing a few things. It's been an awesome little car/micro hot rod/trail runner, racing atv's through the woods, powerline roads, road trips, it can haul a trailer...hell I even drug a broke down roll-back wrecker across a parking lot one day. Hauled a long wheel base full sized Chevy truck on a homemade trailer about 75 miles (that was fun, and by fun I mean scary as hell, weighed 3 times more than the car). It's all 60'd out right now, flat black, fat 4 spoke Crager's on back, skinny stock on front, traction bars. Everything aluminum on the engine is polished except the head, polished brass radiator top. It's like, oh look at that worn out old car...but when you open the hood you hear angels singing.

@cadejohnson4799 3 года назад

Thank you for all your work and information. I always loved painting before, without knowing some important steps. You have stepped MY painting game up. My project is a 95 Chevy Impala going back to gloss black

@markadoss6705 Год назад

Enjoy watching DIY at home. Keep these videos coming! Even explaining everything is key! Rite on !!!😊😊

@bigmikez3128 3 года назад

Loving these videos bro and the civic is coming out real nice man!

@aoktechus 17 дней назад

This video is exactly what I needed! Glad to see a DIY process that could make it more presentable. Fantastic job as always!

@MrJoebiz24 3 года назад

Incredibly concise and detailed video. I'm stocked up on elbow grease. The car is next. Thank you! (Oh, and subbed).

@DesiJattUk 3 года назад

Wow awesome job bro with spray can I learned something new today thanks for sharing

@antonychadburn1404 2 года назад

Absolutely brilliant guidance and advice. Keep up the good work.

@myleshansel7950 3 года назад

Great video, I have learned so much from you're videos as I repair my dually fender.

@chrischeezer 3 года назад

wow... great job with that clear coat. I painted my whole car in my garage with cans as well. Great video.

@DuckDiggler 2 года назад

How'd it turn out?

@stendecstretcher5678 2 года назад

Thank you for making these videos. I've been able to make my old Toyota Corolla look so much better on a tight budget and boosted my confidence doing body work.

@ericpecana5529 Год назад

Thank you so much to show us your talent and technique to paint a cars special with rattle cans for DIY. As a newbie for painting a cars such a bit scary to be mistake. But now got a confidence to do it.. And just like you said " don't over think it, it's just a paint" thank you 😊

@gergemall Год назад

Wonderful video, you are a wonderful instructor . I appreciate your tutorial. I liked the saying ‘ don’t over think it , it’s just paint ‘ BRAVO . BEST VIDEO FOR THIS ON RU-vid.

@popejbryant 3 года назад

I just bought paint scratch products to repaint my engine bay. Glad to see y'all using them

@trollmanrs 2 года назад

WOW what a difference with just rattle cans. Been watching a number of your video's in prep for doing some paint & clear touch ups on my daughters red Alfa Mito. Keep up the good work. subbed from England :-)

@MegaSunRise3 3 года назад

Wow, that was a really impressive result! Out of a spray can... I wouldn't believe it if I hadn't seen the process

@brendanmatthys3788 3 года назад

That's honestly such a close colour match! I almost can't believe that wasn't blended! With a cut and polish on the rest of the car (maybe a flowcoat on the rear bumpter) that civic can look brand new

@clarkkent4991 Год назад

Every time I watch one of your vids I get more and more excited to try to paint my 1987 Nissan 300ZX!!!🏆🏆🏆🏆

@reydogmotor 2 года назад

Excellent video on how to not over think it…😎. I on the other hand am afraid of starting something that won’t come out as good but I’m pretty sure it will look much better than my old ugly faded paint on my 1994 red mustang. The main reason I don’t drive it is how it looks. I feel comfortable stepping up to paint it myself, thanks and keep the videos coming. You have a great way of teaching, short and direct.

@bmindful 2 года назад

Wonderful vid 💪🏾 greatly appreciate your time and knowledge sir🙏🏾

@rachelblack3816 2 года назад

"Don't overthink it, it's just paint!" Those words alone give me the confidence to try something like this. Thank you, sir.

@godfamilycountry4211 3 года назад

Sweet. Always learn so much as a sub to your channel. Thx for taking the time to teach us. Looks great for low budget.👍

@Ashroyer86 Год назад

One of the best paint channels on the tube.

@mikedodd9294 Год назад

love these videos! Using your techniques just did my 2014 Porsche bumper cover in Guards Red (easy solid color) bumper with 3 cans of base and 3 cans of 2k clear, looks perfect. Granted I already own a rotary buffer, DA polisher, and years of 3M sandpaper. Doesn't have to be a beater to use these techniques.

@on-site4094 2 года назад

Your wisdom and experience is very educational & useful thanks for keeping it simple

@piggawigga4929 Год назад

Thanks for posting videos like this saves thousands of dollars.

@gerardofollano8417 Год назад

Amazing results from a can, prep work is everything.

@aprilgates4937 3 года назад

Wow! Great job. Looks fantastic

@chronoszeus9267 3 года назад

Brian, The Spray Paint Master! Wow!

@MrMurph111 3 года назад

Paintwork is not easy to get it right and you make it look so easy. Thanks for all the tips and tricks for us layman.

@larryk.watson2778 3 года назад

You really produce absolutely wonderful content

@mikeammargon6847 3 года назад

Thanks for the videos and the inspiration... im gonna try to temp fix my car until I do a complete paint job.. keep up the great work

@robinsonnunez2129 3 года назад

Love this jobs, I’ll be doing my Sienna peeling hood soon

@KeithSWD 3 года назад

I have a black colour Chrysler/Dodge Neon 2005 2.0L with a similar problem! Though, i just cannot find "Perfect Match" spray cans here in Cape Town, unfortunately. But after having watch your videos, I am now motivated and/or confident i can do this too with any quality spray paints i can get around. "Don't overthink it, it's just paint!"

@GoneUnder 3 года назад

Awesome job! Thank you for all the help touching my old Tacoma.

@Work_G 3 года назад

Sometimes even when you have access to air compressor air spray gun for small jobs just easier to take spray can! Great results!

@BMWExpert 14 дней назад

I bought a brand new e60 m5 bumper, needed to get it painted but that just would cost me 380-450€ if I gave it to a friend of mine. So decided to get my paint mixed by my reg number and watched some of your videos. Results came out fantastic. I’ve never done it before and I’ve already managed to even earn money thanks to yours videos man! I Really appreciate what you do for the community. Great content with a proper explanation!

@lilwank9602 Год назад

just did this on my 2007 Acura TL Type-S in Kinetic Blue pearl. My rear bumpers clear coat was so shot. Looks brand new! Paint Scratch got a perfect color match

@johnf6267 Год назад

Best instructor on you tube for the DYI.

@jimmorris8966 6 месяцев назад

Brian; I do not commit very often but you are very impressive. I try to stop video and write down needed information (paint, sand paper to use) an 1:02 second was said WoW a lot of notes and then you compiled it all at the end of the video. After watching you makes me feel I could paint a whole Chev S 10, out of a spray can.

@iamtifosi701 3 года назад

Thanks for the informative video Brian! Always helpful and encouraging! I hope you will have additional turbine sprayer videos. Especially tips re Fuji gun tip size, setup, and techniques. I have a Fuji 4 stage. Great system but find that Fuji Spray is lacking in automotive related info. Thanks again!

@itchy7727 6 месяцев назад

Good job Man ! Helping the working class !

@paulmc9314 3 года назад

Dude I did 2 years learning panel beating in college. They do not include painting in UK in these courses it's one or the other. Your videos are insanely good very detailed if lecturers could teach only half as good as you do on here there would be much better techs out there. One video I would love to see is painting outdoors a lot of people myself included don't have a unit or a garage big enough to paint in. So it comes down to picking your day carefully or using pop up shelter. Great video dude

@twinturbobmw535xi7 2 месяца назад

This is also my problem , not having a garage or anywhere to Mimic a “paint booth”. My only option is doing it on a day when there’s hardly any wind. Lol.

@ramcentralstation Год назад

amazing work! I love your videos, very motivating.

@EyeAmWhoEyeAm Месяц назад

Brother hands down the most best can spray job i have ever seen job well done 👌👍👏👏👏👏👏🙏💜☮️🕊️🕯️🌟✨

@hvytb1 3 года назад

Don't overthink it, it's just paint! :D Thanks for the videos mate, keep up the good work!

@JavierLopez-po2dv Год назад

Is amazing how great you are with this painting work and the tutorial is excellent too thank you

@frankgomezjr7520 Месяц назад

Great job as always my brotha 🎉

@robinmuster4695 9 месяцев назад

Your paint skills are amazing!!

@TheMightybasstone Год назад

i didnt think you could put primer over clear coat..... I needed this info THANK YOU!!!

@adellantte3755 3 года назад

Got the same problem with my car clear is peeling off.Now it's time to sort things out.Thx Brian amazing job again!

@jayantoine669 2 года назад

Fantastic video mate. I’m going to try this method on my Dad’s car.

@brendamoore6849 12 дней назад

I might be a girl, but after watching some of your videos, I KNOW I can do this! I'm excited to take on this on my car with just a few areas of needed repair to preserve. Thank you so much!

@jeffdeluca1153 10 дней назад

Men have nothing on women in most things - you can surely do this!

@NwWrenchin Год назад

Just received everything I ordered from your links to fix the peeling clear on my wife’s car

@chrisrobles2012 3 года назад

I thought it came out just fine without the buffing job. Great job from a spray can .

@garethplaysdrums 3 года назад

Awesome video. Looks fantastic 👍👍👍

@garielgodinez9015 3 года назад

learned a lot from you sir...thank you so much...watching from philippines...

@user-dd9og1qk1c 3 месяца назад

Your video is still helping people 3 years later! Great teacher..me as a student not so much. Would love a follow up on how to fix things like uneven basecoats and rough appearances. 🙃 Totally messed up and clear coated over it…and now I get to look at it under a protective layer..smh..beginner mistakes for sure.

@imthedudemane 3 года назад

Thank you so much man, bless your family!

@husky1232 3 года назад

Come out really nice for rattle can nice job thank you Brian for the video

@MiguelGomez-rs4kv 3 года назад

Great work! Looks really good

@furtalance_x 29 дней назад

That was excellent work man..

@rick00770 2 года назад

Appreciate it, great tips, I'm going to try this. Sounds great. Subscribed.

@mando-hondadc2992 3 года назад

This car coming g out so nice. The level of detail

@sully3s 3 года назад

Thank you thank you thank you! Great info! I bought an e36 bmw that’s in pretty good shape but the clear coat is peeling and I’ve got some rust in a few spots. I’m gonna go for some paint repair using what I’m learning in your videos.

@georgejones404 2 года назад

As usual, Brian. Great job. Your videos are done so well and the instructions is great. Thank you!

@jamesbracy7809 Год назад

Thanks for sharing your expertise on this issue.

@octane_rl4659 7 месяцев назад

Great video! easily explained, and great results!

@francoissaintine5161 Год назад

At some point, I am going to do this in my car ( Chevrolet Traverse 2015). Lately, I started noticing osmotic blistering gradually began to form on the hood paint. May God bless you ! This will definitely save me so much money if I apply these skills.

@tv-ll5bl 2 года назад

Amazing results 👍very inspiring

@vab007vab Год назад

You explanined everything so well. Gave me the confidence to try it because its doable. Thank You

@PaintSociety Год назад

You’re welcome 😊

@thomasmcgilvray5530 3 года назад

Mate you rock - this is one of my fav channels

@Rudeman780 5 месяцев назад

Dude !!! You make anything look good

@Snicker60515 3 года назад

I wanna do the roof of my car like this. And the clear is just beginning to fail in 4 separate spots, so it shouldn't be too much of a hassle to get it looking nice again. I wanna get my paint to the point where it'd be worth it to do a professional grade coating on it and all I really need to make it better is the roof and the front and rear bumpers. Thank you Brian for sharing your technique!